Processing and properties of poly(ester-urethane)/modified montmorillonite nanocomposite foams derived from novel diol and tolylene-2,4-diisocyanate

Journal of Thermoplastic Composite Materials

Volumn 30, Issue 5, 2017, Pages 608-624

  Kausar, Ayesha ^a  

^a QUAID I AZAM UNIVERSITY   (Pakistan)

Author keywords

distorted honeycomb; flame retardant; foams; montmorillonite; Poly(ester urethane)

Indexed keywords

CLAY MINERALS; DECOMPOSITION; DYNAMIC MECHANICAL ANALYSIS; ESTERS; ETHYLENE; ETHYLENE GLYCOL; FIELD EMISSION MICROSCOPES; FILLERS; FLAME RETARDANTS; GLASS TRANSITION; HONEYCOMB STRUCTURES; NANOCOMPOSITES; SCANNING ELECTRON MICROSCOPY; SILICATES; TENSILE STRENGTH; THERMOANALYSIS; THERMOGRAVIMETRIC ANALYSIS; TOLUENE; WATER ABSORPTION;

DISTORTED HONEYCOMB; DYNAMIC MECHANICAL THERMAL ANALYSIS; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; MONTMORILLONITE NANOCOMPOSITES; PERCENTAGE OF WATER ABSORPTIONS; POLYESTERURETHANES; STRUCTURE AND PHYSICAL PROPERTIES; THERMAL DECOMPOSITION TEMPERATURE;

FOAMS;

EID: 85019124665     PISSN: 08927057     EISSN: 15307980     Source Type: Journal    
DOI: 10.1177/0892705715610401     Document Type: Article

References (25)

1. Alexandre M, Dubois P,. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R 2000; 28 (1-2): 1-63.
2. Kausar A, Zulfiqar S, Ishaq M, et al. Mechanical properties of functionalized SEBS based inorganic hybrid materials. Polym Bull 2007; 59 (4): 457-468.
3. Chang JH, An YU,. Nanocomposites of polyurethane with various organoclays: thermomechanical properties, morphology, and gas permeability. J Polym Sci B Polym Phys 2002; 40 (7): 670-677.
4. Morgan AB,. Flame retarded polymer layered silicate nanocomposites: a review of commercial and open literature systems. Polym Adv Technol 2006; 17 (4): 206-217.
5. Schartel B, Bartholmai M, Knoll U,. Some comments on the main fire retardancy mechanisms in polymer nanocomposites. Polym Adv Technol 2006; 17 (7): 772-777.
6. Gilman JW, Jackson CL, Morgan AB, et al. Flammability properties of polymer-layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites. Chem Mater 2000; 12 (7): 1866-1873.
7. Tang Y, Hu Y, Wang S, et al. Preparation and flammability of ethylene-vinyl acetate copolymer/montmorillonite nanocomposites. Polym Degrad Stab 2002; 78 (3): 555-559.
8. Duquesne S, Jama C, Le Bras M, et al. Elaboration of EVA-nanoclay systems: characterization, thermal behavior and fire performance. Compos Sci Technol 2003; 63 (8): 1141-1148.
9. Fornes TD, Yoon PJ, Hunter DL, et al. Effect of organoclay structure on nylon 6 nanocomposite morphology and properties. Polymer 2002; 43 (22): 5915-5933.
10. Kausar A,. Exploration of novel heat and flame-resistant poly(urethane-imide)/functional layered silicate-based foams. High Perform Polym 2015; 27 (1): 122-131.
11. Kausar A, Zulfiqar S, Yavuz CT, et al. Investigation on novel thermoplastic poly(urethane-thiourea-imide)s with enhanced chemical and heat resistance. Polym Degrad Stab 2011; 96 (7): 1333-1341.
12. 2. Polym Eng Sci 2003; 43 (6): 1261-1275.
13. Zeng C, Han X, Lee LJ, et al. Polymer-clay nanocomposite foams prepared with carbon dioxide. Adv Mater 2003; 15 (20): 1743-1747.
14. Lepoittevin B, Pantoustier N, Devalckenaere M, et al. Poly(-caprolacetone)/clay nanocomposites by in-situ intercalative polymerizatiom catalyzed by dibutyltin dimethoxide. Macromolecules 2002; 35 (22): 8385-8390.
15. Mitsunaga M, Ito Y, Ray SS, et al. Intercalated polycarbonate/clay nanocomposites: nanostructure control and foam processing. Macromol Mater Eng 2003; 285 (7): 543-548.
16. Hussain F, Hojjati M, Okamoto M, et al. Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 2006; 40 (17): 1511-1575.
17. Chang YW, Lee D, Bae SY,. Preparation of polyethyleneoctene elastomer/clay nanocomposite and microcellular foam processed in supercritical carbon dioxide. Polym Int 2006; 55 (2): 184-189.
18. Kim YH, Choi SJ, Kim JM, et al. Effects of organoclay on the thermal insulating properties of rigid polyurethane foams blown by environmentally friendly blowing agents. Macromol Res 2007; 15 (7): 676-681.
19. Ma J, Duan Z, Xue C, et al. Morphology and mechanical properties of EVA/OMMT nanocomposite foams. J Thermoplast Compos Mater 2013; 26 (4): 555-569.
20. Kasiri A, Rezaei M, Zandi F,. The effect of polyethylene graft maleic anhydride compatibilizer on the physical, mechanical, and thermal properties of extruded noncross-linked low-density polyethylene nanocomposite foams. J Thermoplast Compos Mater. Epub ahead of print 18 November 2013. DOI: 10.1177/0892705713513293.
21. Kausar A, Hussain ST,. Effect of modified filler surfaces and filler-tethered polymer chains on morphology and physical properties of poly(azo-pyridyl-urethane)/multi-walled carbon nanotube nanocomposites. J Plast Film Sheet 2014; 30: 181-204.
22. Jia QX, Wu YP, Xiang P, et al. Combined effect of nano-clay and nano-carbon black on properties of NR nanocomposites. Polym Polym Compos 2005; 13: 709-719.
23. Cao X, Lee LJ, Widya T, et al.Polyurethane/clay nanocomposites foams: processing, structure and properties. Polymer 2005; 46 (3): 775-783.
24. Tien YI, Wei KH,. High-tensile-property layered silicates/polyurethane nanocomposites by using reactive silicates as pseudo chain extenders. Macromolecules 2001; 34 (26): 9045-9052.
25. Liu YL, Hsiue GH, Chiu YS, et al. Phosphorus-containing epoxy for flame retardant. I. Synthesis, thermal, and flame-retardant properties. J Appl Polym Sci 1996; 61 (4): 613-621.