Investigation on novel thermoplastic poly(urethane-thiourea-imide)s with enhanced chemical and heat resistance

Polymer Degradation and Stability

Volumn 96, Issue 7, 2011, Pages 1333-1341

  Kausar, Ayesha ^a,b   Zulfiqar, Sonia ^b   Yavuz, Cafer T ^b   Sarwar, Muhammad Ilyas ^a  

^a QUAID I AZAM UNIVERSITY   (Pakistan)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Chain extender; NCO terminated prepolymer; PEG; Thermal stability; Thiourea

Indexed keywords

CARBAMOYL; CHAIN EXTENDERS; CONVENTIONAL METHODS; DIISOCYANATES; HARD SEGMENTS; NCO-TERMINATED; PARTIALLY CRYSTALLINE; PEG; PREPOLYMERS; PROCESSABILITY; SOFT SEGMENTS; SOLUTION VISCOSITY; STARTING MATERIALS; THERMAL BEHAVIORS; THERMAL STABILITY; WEIGHT-AVERAGE MOLECULAR WEIGHT;

CHEMICAL RESISTANCE; ESTERS; GLYCOLS; MOLECULAR WEIGHT; MONOMERS; POLYETHYLENE GLYCOLS; POLYETHYLENE OXIDES; POLYMERS; POLYURETHANES; REINFORCED PLASTICS; SPECIFIC HEAT; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; THIOUREAS; UREA;

HEAT RESISTANCE;

EID: 79957861466     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2011.03.017     Document Type: Article

References (42)

1. H. Ulrich Polyurethanes H.F. Mark, 3rd ed Encyclopedia of polymers science and technology vol. 4 2003 Wiley Hoboken, New Jersey
2. Z. Wirpsza Polyurethane, chemistry, technology and applications 1st ed. 1993 England: Ellis Horwood Chichester, U.K. 60-68
3. T. Takeichi, K. Suefuji, and K. Inoue Preparation of high-temperature polyurethane by alloying with reactive polyamide J Polym Sci Part A Polym Chem 40 20 2002 3497 3503 (Pubitemid 35170566)
4. J.M. Cervantes-Uc, J.I.M. Espinosa, J.V. Cauich-Rodriguez, A. Avila-Ortega, H. Vazquez-Torres, and A. Marcos-Fernandez TGA/FTIR studies of segmented aliphatic polyurethanes and their nanocomposites prepared with commercial montmorillonites Polym Degrad Stab 94 10 2009 1666 1677
5. Z.S. Petrovi, Z. Zavargo, J.H. Flyn, and W.J. Macknight Thermal degradation of segmented polyurethanes J Appl Polym Sci 51 6 1994 1087 1095
6. T. Takeichi, T. Guo, and T. Agag Synthesis and characterization of poly(urethane-benzoxazine) films as novel type of polyurethane/phenolic resin composites J Polym Sci Part A Polym Chem 38 15 2000 4165 4176
7. D.-J. Lee, J.-S. Kong, and H.-D. Kim Synthesis of thermotropic polyurethanes containing imide units and their mesophase behavior J Fiber Polym 1 1 2008 12 17
8. D.K. Chattopadhyay, and D.C. Webster Thermal stability and flame retardancy of polyurethanes Prog Polym Sci 34 10 2009 1068 1133
9. P.R. Nair, C.P.R. Naira, and D.J. Francis Phosphazene-modified polyurethanes: synthesis, mechanical and thermal characteristics Eur Polym J 32 12 1996 1415 1420 (Pubitemid 126362477)
10. H. Yeganeh, S. Jamshidia, and P.H. Talemia Synthesis, characterization and properties of novel thermally stable poly(urethane-oxazolidone) elastomers Eur Polym J 42 8 2006 1743 1754 (Pubitemid 44015731)
11. M. Barikani, S. Mehdipour Ataei, and H. Yeganeh Synthesis and properties of novel optically active polyimides J Polym Sci Part A Polym Chem 39 4 2001 514 518 (Pubitemid 32872651)
12. B. Tamamai, and H. Yeganeh Preparation and properties of novel polyimides derived from 4-aryl-2,6 bis(4-amino phenyl)pyridine J Polym Sci Part A Polym Chem 39 21 2001 3826 3831 (Pubitemid 33074461)
13. H. Yeganeh, and M. Barikani Preparation and properties of novel processable polyimides derived from N, N-bis(isocyanatoalkyl)-1,2,4,5- benzenetetra-carboxylic-1,2:4,5-diimides Polym Int 49 6 2000 514 518
14. J.Y. Jeon, and T.M. Tak Synthesis and characterization of block copoly(urethane-imide) J Appl Polym Sci 62 5 1996 763 769
15. T.P. Gnanarajan, A.S. Nasar, N.P. Iyer, and G. Radhakrishnan Synthesis of poly(urethane-imide) using aromatic secondary amine-blocked polyurethane prepolymer J Polym Sci Part A Polym Chem 38 22 2000 4032 4037
16. T.P. Gnanarajan, N.P. Iyer, A.S. Nasar, and G. Radhakrishnan Preparation and properties of poly(urethane-imide)s derived from amine-blocked-polyurethane prepolymer and pyromellitic dianhydride Eur Polym J 38 3 2002 487 495 (Pubitemid 33149527)
17. A. Sendijavic, V. Sendijavic, and K.C. Frisch Synthesis and properties of urethane-modified polyimides J Polym Sci Part A Polym Chem 28 13 1990 3603 3615
18. D.C. Liao, and K.H. Hsieh Synthesis and characterization of bismaleimides derived from polyurethanes J Polym Sci Part A Polym Chem 32 9 1994 1665 1672
19. P.R. Nair, C.P. Nair, and D.J. Francis Imide-modified polyurethanes, syntheses, thermal, and mechanical characteristics J Appl Polym Sci 70 8 1998 1483 1491 (Pubitemid 128567118)
20. T.L. Wang, and F.J. Huang Synthesis and properties of poly(amide-imide-urethane) thermoplastic elastomers Polym Int 46 4 1998 280 284
21. S. Mallakpour, and F. Rafiemanzelat Preparation and properties of new copoly(amide-imide-ether-urethane)s based on bis(p-amido benzoic acid)-n-trimellitylimido-l-leucine by two different polymerization Polym Bull 58 2 2007 339 350 (Pubitemid 46122258)
22. H. Yeganeh, M. Barikani, and F.N. Khodabadi Synthesis and properties of novel thermoplastic poly(urethane-imide)s Eur Polym J 36 10 2000 2207 2211
23. T.J. Lee, D.J. Lee, and H.D. Kim Synthesis and properties of liquid crystalline polyurethane elastomers J Appl Polym Sci 77 3 2000 577 585
24. B. Jiang, J. Hao, W. Wang, L. Jiang, and X. Cai Synthesis and thermal properties of poly(urethane-imide)s J Appl Polym Sci 81 3 2001 773 781
25. J. Bibiao, H. Jianjun, J. Wenyun, J. Luxia, and C. Xinxian Synthesis and properties of novel polybismaleimide oligomers Eur Polym J 37 3 2001 463 470 (Pubitemid 32092131)
26. P. Radhakrishnan Nair, C.P. Rechunadhan Nair, and D.J. Francis Effect of imide-oxazolidinone modification on the thermal and mechanical properties of HTPB-polyurethanes J Appl Polym Sci 71 11 1999 1731 1738
27. M. Zuo, Q. Xiang, and T. Takeichi Preparation and properties of novel poly(urethane-imide)s Polymer 39 26 1998 6883 6889 (Pubitemid 29007090)
28. M. Zuo, and T. Takeichi Novel method for the preparation of poly(urethane-imide)s and their properties J Polym Sci Part A Polym Chem 35 17 1997 3745 3753 (Pubitemid 127578873)
29. S. Neffgen, J. Kusan, T. Fey, H. Keul, and H. Hocker Synthesis and thermal properties of [n]-polyurethanes Macromol Chem Phys 201 16 2000 2108 2114
30. R.A. Azzam, S.K. Mohamed, R. Tol, V. Everaert, H. Reynaers, and B. Goderis Synthesis and thermo-mechanical characterization of high performance polyurethane elastomers based on heterocyclic and aromatic diamine chain extenders Polym Degrad Stab 92 7 2007 1316 1325 (Pubitemid 46992684)
31. D.K. Lee, and H.B. Tsai Properties of segmented polyurethanes derived from different diisocyanates J Appl Polym Sci 75 1 2000 167 174
32. J. Lefebvre, B. Bastin, M.L. Bras, S. Duquesne, R. Paleja, and R. Delobel Thermal stability and fire properties of conventional flexible polyurethane foam formulations Polym Degrad Stab 88 1 2005 28 34 (Pubitemid 40244993)
33. S.-I. Lee, S.-C. Yu, and Y.-S. Lee Degradable polyurethanes containing poly(butylene succinate) and poly(ethylene glycol) Polym Degrad Stab 72 1 2001 81 87 (Pubitemid 32284736)
34. S. Giraud, G. Salaün, I. Vroman, and S. Bourbigot Influence of chemical shell structure on the thermal properties of microcapsules containing a flame retardant agent Polym Degrad Stab 95 2008 315 319
35. E.G. Bajsic, V. Rek, and A. Agic Thermal degradation of polyurethane elastomers: determination of kinetic parameters J Elastomers Plast 35 4 2003 311 323
36. C. Zhang, and S. Feng Effect of glycols on the properties of polyester polyols and of room-temperature-curable casting polyurethanes Polym Int 53 12 2004 1936 1940 (Pubitemid 39605505)
37. J. Glastrup Stabilisation of polyethylene and polypropylene glycol through inhibition of a β-positioned hydroxyl group relative to an ether group. A study of modified triethylene and tripropylene glycols Polym Degrad Stab 81 2 2003 273 278
38. A. Kausar, S. Zulfiqar, Z. Ahmed, and M.I. Sarwar Novel processable and heat resistant poly(phenylthiourea azomethine imide)s: synthesis and characterization Polym Degrad Stab 95 9 2010 1826 1833
39. J. Liu, D. Ma, and Z. Li FTIR studies on the compatibility of hard-soft segments for polyurethane-imide copolymers with different soft segments Eur Polym J 38 4 2002 661 665 (Pubitemid 34154166)
40. M. Rogulska, A. Kultys, and S. Pikus Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. III. The effect of molecular weight and structure of soft segment on some properties of segmented polyurethanes J Appl Polym Sci 110 3 2008 1677 1689
41. J.W. Downing, and J.A. Newell Characterization of structural changes in thermally enhanced Kevlar-29 fiber J Appl Polym Sci 91 1 2004 417 424 (Pubitemid 38014236)
42. H.R. Moeini Synthesis and properties of novel polyurethane-urea insulating coatings from hydroxyl-terminated prepolymers and blocked isocyanate curing agent J Appl Polym Sci 112 6 2009 3714 3720