Rapid prototyping of microfluidic chips using laser-cut double-sided tape for electrochemical biosensors

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Volumn 39, Issue 5, 2017, Pages 1469-1477

  Khashayar, Patricia ^a,b,c   Amoabediny, Ghassem ^a   Larijani, Bagher ^c   Hosseini, Morteza ^a   Van Put, Steven ^b   Verplancke, Rik ^b   Vanfleteren, Jan ^b  

^a UNIVERSITY OF TEHRAN   (Iran)

^b GHENT UNIVERSITY   (Belgium)

^c TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

Author keywords

Biosensors; Microfluidic; Point of care

Indexed keywords

BIOSENSORS; ELECTROCHEMICAL SENSORS; FABRICATION; FLUIDIC DEVICES; HYBRID SYSTEMS; PHOTOLITHOGRAPHY;

CLEANROOM ENVIRONMENT; ELECTROCHEMICAL BIOSENSOR; LOW COST FABRICATION; MICROFLUIDIC CHANNEL; MICROFLUIDIC TECHNOLOGIES; POINT OF CARE; POINT OF CARE DIAGNOSTIC; REAGENT CONSUMPTION;

MICROFLUIDICS;

EID: 85017438754     PISSN: 16785878     EISSN: 18063691     Source Type: Journal    
DOI: 10.1007/s40430-016-0684-6     Document Type: Article

References (28)

1. Hua J, Wang SQ, Wanga L, Lib F, Pingguan-Murphye B, Lub TJ, Xua F (2014) Advances in paper-based point-of-care diagnostics. Biosens Bioelectron 54:585–597
2. Hawkins KR, Weigl BH (2010) Microfluidic diagnostics for low-resource settings. In: Becker H, Wang W (eds) Microfluidics, BioMEMS, and medical microsystems Viii. Proceedings of the SPIE, vol 7593, pp 75930L1–L15
3. Nilghaz A, Wicaksono DH, Gustiono D, Abdul Majid FA, Supriyanto E, Abdul Kadir MR (2012) Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique. Lab Chip 12:209–218
4. Duffy DC, McDonald JC, Schueller OJA, Whitesides GM (1998) Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Anal Chem 70:4974–4984
5. Gu P, Liu K, Chen H, Nishida T, Fan ZH (2011) Chemical-assisted bonding of thermoplastics/elastomer for fabricating microfluidic valves. Anal Chem 83:446–452
6. Mitra SK, Chakraborty S (2012) Microfluidics and nanofluidics handbook. CRC Press/Taylor and Francis, Novato
7. Flachsbart BR, Wong K, Iannacone JM, Abante EN, Vlach RL, Rauchfuss PA et al (2006) Design and fabrication of a multilayered polymer microfluidic chip with nanofluidic interconnects via adhesive contact printing. Lab Chip 6(5):667–674
8. Lin R, Burns MA (2005) Surface-modified polyolefin microfluidic devices for liquid handling. J Micromech Microeng 15:2156–2162
9. Zhang W, Lin S, Wang C, Hu J, Li C, Zhuang Z, Zhou Y et al (2009) PMMA/PDMS valves and pumps for disposable microfluidics. Lab Chip 9:3088–3094
10. Sunkara V, Park DK, Hwang H, Chantiwas R, Soper SA, Cho YK (2011) Simple room temperature bonding of thermoplastics and poly(dimethylsiloxane). Lab Chip 11:962–965
11. Mehta G, Lee J, Cha W, Tung YC, Linderman JJ, Takayama S (2009) Hard top soft bottom microfluidic devices for cell culture and chemical analysis. Anal Chem 81:3714–3722
12. Steigert J, Haeberle S, Brenner T, Müller C, Steinert CP, Koltay P et al (2007) Rapid prototyping of microfluidic chips in COC. J Micromech Microeng 17(2)
13. Lee SW, Lee SS (2008) Shrinkage ratio of PDMS and its alignment method for the wafer level process. Microsyst Technol 14(2):205–208
14. Moral-Vico J, Barallat J, Abad L, Olivé-Monllau R, Xavier Muñoz-Pascual F, Galán Ortega A, del Campo FJ, Baldrich E (2015) Dual chronoamperometric detection of enzymatic biomarkers using magnetic beads and a low-cost flow cell. Biosens Bioelectron 69:328–336
15. Nath P, Fung D, Kunde YA, Zeytun A, Brancha B, Goddarda G (2010) Rapid prototyping of robust and versatile microfluidic components using adhesive transfer tapes. Lab Chip 10:2286–2291
16. Hwang JS, Kim SY, Kim YS, Song HJ, Park CY, Kim JD (2015) Implementation of PCB-based PCR chip using double-sided tape. IJCA 8(2):117–124
17. Khashayar P, Amoabediny Gh, Larijani B, Hosseini M, Verplancke R, Schaubroek D, De Keersmaecker M, Adriaens A, Vanfleteren J (2016) Characterization of gold nanoparticle layer deposited on gold electrode by various techniques for improved sensing abilities. Biointerface Res Appl Chem 6(4):1380–1390
18. Mair DA, Geiger E, Pisano AP, Frechet JMJ, Svec F (2006) Injection molded microfluidic chips featuring integrated interconnects. Lab Chip 6:1346–1354
19. Bartholomeusz DA, Boutté RW, Andrade JD (2005) Xurography: rapid prototyping of microstructures using a cutting plotter. J Microelectromech Syst 14(6):1364–1374
20. Kim J, Shin Y, Song S, Lee J, Kim J (2014) Rapid prototyping of multifunctional microfluidic cartridges for electrochemical biosensing platforms. Sens Actuators B Chem 202:60–66
21. Luo LW, Teo CY, Ong WL, Tang KC, Cheow LF, Yobas L (2007) Rapid prototyping of microfluidic systems using a laser-patterned tape. J Micromech Microeng 17:N107–N111
22. Patko D, Martonfalvi Z, Kovacs B, Vonderviszt F, Kellermayer M, Horvath R (2014) Microfluidic channels laser-cut in thin double-sided tapes: cost-effective biocompatible fluidics in minutes from design to final integration with optical biochips. Sens Actuators B Chem 196:352–356
23. Martinez AW, Phillips ST, Whitesides GM, Carrilho E (2010) Diagnostics for the developing world: microfluidic paper-based analytical devices. Anal Chem 82:3–10
24. Tsao CW, DeVoe DL (2009) Bonding of thermoplastic polymer microfluidics. Microfluid Nanofluid 6:1–16
25. Kim J, Surapaneni R, Gale BK (2009) Rapid prototyping of microfluidic systems using a PDMS/polymer tape composite. Lab Chip 9:1290–1293
26. Mair DA, Rolandi M, Snauko M, Noroski R, Svec F, Fréchet JMJ (2007) Room-temperature bonding for plastic high-pressure microfluidic chips. Anal Chem 79(13):5097–5102
27. Bruus H (2011) Basic flow solutions. In: Bruus H (ed) Theoretical microfluidics, 4th edn. Oxford University Press, New York
28. Hawkins KR, Steedman MR, Baldwin RR, Fu E, Ghosal S, Yager P (2007) A method for characterizing adsorption of flowing solutes to microfluidic device surfaces. Lab Chip 7(2):281–285