Seismic Strengthening of Masonry Vaults with Abutments Using Textile-Reinforced Mortar

Journal of Composites for Construction

Volumn 21, Issue 2, 2017, Pages

  Ramaglia, Giancarlo ^a   Lignola, Gian Piero ^a   Balsamo, Alberto ^a   Prota, Andrea ^a   Manfredi, Gaetano ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ABUTMENTS (BRIDGE); MORTAR; REINFORCEMENT; RELIGIOUS BUILDINGS; SEISMOLOGY; TEXTILES;

INNOVATIVE MATERIALS; INSTRUMENTAL RESPONSE; PEAK GROUND ACCELERATION; SEISMIC STRENGTHENING; STRENGTHENING SYSTEMS; STRENGTHENING TECHNIQUE; TEXTILE-REINFORCED MORTARS; TRADITIONAL APPROACHES;

MASONRY MATERIALS;

EID: 85015810992     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000733     Document Type: Article

References (45)

1. Alecci, V., De Stefano, M., Raimondo, L., Rovero, L., and, Stipo, G. (2015). " Experimental investigation on bond behavior of cement matrix-based composites for strengthening of masonry structures." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000598,.
2. Angelillo, M., Babilio, E., Cardamone, L., Fortunato, A., and, Lippiello, M. (2014). " Some remarks on the retrofitting of masonry structures with composite materials." Compos. Part. B Eng., 61, 11-16. 10.1016/j.compositesb.2014.01.025
3. Angelillo, M., Babilio, E., and, Fortunato, A. (2012). " Singular stress fields for masonry-like vaults." Contin. Mech. Thermodyn., 25 (2-4), 423-441. CMETEJ 0935-1175 10.1007/s00161-012-0270-9
4. Angelillo, M., and, Fortunato, A. (2004). " Equilibrium of masonry vaults." Novel approaches in civil engineering, M. Frémond and F. Maceri., eds., Springer, Berlin, 105-11.
5. Angelillo, M., Fortunato, A., Lippiello, M., and, Montanino, A. (2013). " Singular stress fields in masonry structures: Derand was right." Meccanica, 49 (5), 1243-1262. MECCB9 0025-6455 10.1007/s11012-014-9880-6
6. Bernat-Maso, E., Gil, L., and, Marcé-nogué, J. (2012). " The structural performance of arches made of few vossoirs with dry-joints." Struct. Eng. Mech., 44 (6), 775-799. 10.12989/sem.2012.44.6.775 SEGMEQ
7. Bracci, J. M., Reinhorn, A. M., and, Mander, J. B. (1992). " Seismic resistance of reinforced concrete frame structures designed only for gravity loads. Part III: Exp performance and analytical study of a model." State Univ. of New York at Buffalo, Buffalo, NY.
8. Briccoli Bati, S., and, Rovero, L. (2008). " Towards a methodology for estimating strength and collapse mechanism in masonry arches strengthened with fibre reinforced polymer applied on external surfaces." Mater. Struct., 41 (7), 1291-1306. 10.1617/s11527-007-9328-8
9. Briccoli Bati, S., Rovero, L., and, Tonietti, U. (2007). " Strengthening masonry arches with composite materials." J. Compos. Constr., 10.1061/(ASCE)1090-0268(2007)11:1(33), 33-41.
10. Calderini, C., and, Lagomarsino, S. (2014). " Seismic response of masonry arches reinforced by tie-rods: Static tests on a scale model." J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0001079,.
11. Carozzi, F. G., Milani, G., and, Poggi, C. (2014). " Mechanical properties and numerical modeling of fabric reinforced cementitious matrix (FRCM) systems for strengthening of masonry structures." Compos. Struct., 107, 711-725. COMSE2 0263-8223 10.1016/j.compstruct.2013.08.026
12. CEN (European Committee for Standardization). (2002). " Methods of test for masonry units. Part 1: Determination of compressive strength." EN 772-1, Brussels, Belgium.
13. D'Ambrisi, A., Feo, L., and, Focacci, F. (2013 a). " Experimental and analytical investigation on bond between carbon-FRCM materials and masonry." Compos. Part. B Eng., 46, 15-20. 10.1016/j.compositesb.2012.10.018
14. D'Ambrisi, A., Feo, L., and, Focacci, F. (2013 b). " Masonry arches strengthened with composite unbonded tendons." Compos. Struct., 98, 323-329. 10.1016/j.compstruct.2012.10.040 COMSE2 0263-8223
15. D'Ambrisi, A., Mezzi, M., Feo, L., and, Berardi, V. P. (2014). " Analysis of masonry structures strengthened with polymeric net reinforced cementitious matrix materials." Compos. Struct., 113, 264-271. 10.1016/j.compstruct.2014.03.032 COMSE2 0263-8223
16. EN. (2004). " Prodotti da costruzione di laterizio-Tavelloni, tavelle e tavelline- Terminologia, requisiti e metodi di prova." EN-11128, Rome (in Italian).
17. Fortunato, A., Fraternali, F., and, Angelillo, A. (2014). " Structural capacity of masonry walls under horizontal loads." Int. J. Earthquake Eng., 31 (1), 41-51. IJDEDD 0261-7277
18. Garmendia, L., Larrinaga, P., San-Mateos, R., and, San-José, J. T. (2015). " Strengthening masonry vaults with organic and inorganic composites: An experimental approach." Mater. Des., 85, 102-114. 10.1016/j.matdes.2015.06.150 MADSD2 0264-1275
19. Garmendia, L., San-José, J. T., García, D., and, Larrinaga, P. (2011). " Rehabilitation of masonry arches with compatible advanced composite material." Constr. Build. Mater., 25 (12), 4374-4385. CBUMEZ 10.1016/j.conbuildmat.2011.03.065
20. Giamundo, V., Lignola, G. P., Maddaloni, G., Balsamo, A., Prota, A., and, Manfredi, G. (2015). " Experimental investigation of the seismic performances of IMG reinforcement strengthening on curved masonry elements." Comp. Part. B Eng., 70, 53-63. 10.1016/j.compositesb.2014.10.039
21. Giamundo, V., Lignola, G. P., Prota, A., and, Manfredi, G. (2014). " Nonlinear analyses of adobe masonry walls reinforced with fiberglass mesh." Polymers (Basel), 6 (2), 464-478. 10.3390/polym6020464
22. Girardello, P., Pappas, A., da Porto, F., and, Valluzzi, R. M. (2013). " Experimental testing and numerical modelling of masonry vaults." Proc., 13th Int. Conf. on Rehabilitation and Restoration of Structures, Dept. of Civil Engineering, IIT Madras, Chennai, India, 1-10.
23. Heyman, J. (1995). The stone skeleton. Structural engineering of masonry architecture, Cambridge University Press, Cambridge, U.K.
24. IBC (Italian Building Code). (2009). " Circolare n. 617/2009. Istruzioni per l'applicazione delle "Norme Tecniche per le Costruzioni" di cui al decreto ministeriale 14 gennaio 2008." Ministero delle Infrastrutture e dei trasporti (MIT), Rome (in Italian).
25. Jasieńko, J., Di Tommaso, A., and, Bednarz, L. (2009). " Experimental investigation into collapse of masonry arches reinforced using different compatible technologies." MuRiCo3, Mechanics of Masonry Structures Strengthened with Composite Materials, Pitagora, Bologna, Italy, 316-324.
26. Lignola, G. P., Flora, A., and, Manfredi, G. (2008). " Simple method for the design of jet grouted umbrellas in tunneling." J. Geotech. Geoenviron. Eng., 10.1061/(ASCE)1090-0241(2008)134:12(1778), 1778-1790. JGGEFK 1090-0241
27. Lignola, G. P., Prota, A., and, Manfredi, G. (2009). " Nonlinear analyses of tuff masonry walls strengthened with cementitious matrix-grid composites." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000007, 243-251.
28. Lignola, G. P., Prota, A., and, Manfredi, G. (2012). " Numerical investigation on the influence of FRP retrofit strengthening layout and geometry on the in-plane behavior of masonry walls." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000297, 712-723.
29. Maalej, M., Lin, V. W. J., Nguyen, M. P., and, Quek, S. T. (2010). " Engineered cementitious composites for effective strengthening of unreinforced masonry walls." Eng. Struct., 32 (8), 2432-2439. ENSTDF 0141-0296 10.1016/j.engstruct.2010.04.017
30. Oliveira, D. V., Basilio, I., and, Lourenço, P. B. (2010). " Experimental behavior of FRP strengthened masonry arches." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000086, 312-322.
31. Papanicolaou, C. G., Triantafillou, T. C., Karlos, K., and, Papathanasiou, M. (2007). " Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: In-plane cyclic loading." Mater. Struct., 40 (10), 1081-1097. 10.1617/s11527-006-9207-8
32. Papanicolaou, C. G., Triantafillou, T. C., Papathanasiou, M., and, Karlos, K. (2008). " Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: Out-of-plane cyclic loading." Mater. Struct., 41 (1), 143-157. 10.1617/s11527-007-9226-0
33. Parisi, F., Lignola, G. P., Augenti, N., Prota, A., and, Manfredi, G. (2011). " Nonlinear behavior of a masonry subassemblage before and after strengthening with inorganic matrix-grid composites." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000203, 821-832.
34. Prota, A., Marcari, G., Fabbrocino, G., Manfredi, G., and, Aldea, C. (2006). " Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites." J. Compos. Constr., 10.1061/(ASCE)1090-0268(2006)10:3(223), 223-233.
35. Ramaglia, G., Lignola, G. P., and, Prota, A. (2015). " A simplified approach to evaluate retrofit strengthening effects on curved masonry structures." Proc., 3rd Conf. on Smart Monitoring, Assessment and Rehabilitation of Structures, Istanbul Technical Univ. (İTÜ), Istanbul, Turkey.
36. Ramaglia, G., Lignola, G. P., and, Prota, A. (2016). " Collapse analysis of slender masonry barrel vaults." Eng. Struct., 117, 86-100. ENSTDF 0141-0296 10.1016/j.engstruct.2016.03.016
37. Roca, P., and, Araiza, G. (2010). " Shear response of brick masonry small assemblages strengthened with bonded FRP laminates for in-plane reinforcement strengthening." Constr. Build. Mater., 24 (8), 1372-1384. CBUMEZ 10.1016/j.conbuildmat.2010.01.005
38. Rotunno, T., Rovero, L., Tonietti, U., and, Briccoli Bati, S. (2014). " Experimental study of bond behavior of CFRP-to-brick joints." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000528,.
39. Rovero, L., Focacci, F., and, Stipo, G. (2012). " Structural behavior of arch models strengthened using FRP strips of different lengths." J. Compos. Constr., 10.1061/(ASCE)CC.1943-5614.0000325, 249-258.
40. UNI-CEN (Ente Nazionale Italiano di Unificazione-European Committee for Standardization). (2007). " Metodi di prova per malte per opere murarie. Parte 11: Determinazione della resistenza a flessione e a compressione della malta indurita." UNI-EN 1015-11, Rome (in Italian).
41. UNI-CEN (Ente Nazionale Italiano di Unificazione-European Committee for Standardization). (2010). " Specifiche per malte per opere murarie. Parte 2: Malte per muratura." UNI-EN 998, Rome (in Italian).
42. UNI (Ente Nazionale Italiano di Unificazione). (1979). " Prove sui calcestruzzi. Determinazione del modulo elastico secante a compressione." UNI 6556, Rome (in Italian).
43. UNI (Ente Nazionale Italiano di Unificazione). (1986). " Prodotti di laterizio per murature. Metodi di prova." UNI-8942-3, Rome (in Italian).
44. Valluzzi, M., Valdemarca, M., and, Modena, C. (2001). " Behavior of brick masonry vaults strengthened by FRP laminates." J. Compos. Constr., 10.1061/(ASCE)1090-0268(2001)5:3(163), 163-169.
45. Valluzzi, M. R., Tinazzi, D., and, Modena, C. (2002). " Shear behavior of masonry panels strengthened by FRP laminates." Constr. Build. Mater., 16 (7), 409-416. CBUMEZ 10.1016/S0950-0618(02)00043-0