Numerical investigation on the influence of frp retrofit layout and geometry on the in-plane behavior of masonry walls

Journal of Composites for Construction

Volumn 16, Issue 6, 2012, Pages 712-723

  Lignola, Gian Piero ^a   Prota, Andrea ^a   Manfredi, Gaetano ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Code provisions; Finite element method; FRP strengthening; Masonry in plane behavior; Parametric analysis

Indexed keywords

CODE PROVISIONS; CRACKING PATTERNS; DISPLACEMENT CURVE; EXPERIMENTAL PROGRAM; FIBER REINFORCED POLYMERS; FRP STRENGTHENING; GLOBAL BEHAVIORS; INTERNATIONAL DESIGNS; MAJOR EVENTS; MASONRY IN-PLANE BEHAVIOR; MASONRY WALLS; MICRO-MODELING; NATURAL STONES; NUMERICAL INVESTIGATIONS; PARAMETRIC ANALYSIS; RESEARCH GROUPS; SCIENTIFIC LITERATURE; SHEAR CAPACITY; UNREINFORCED MASONRY;

BRICK; BRICKMAKING; DESIGN; FINITE ELEMENT METHOD; LOADING; MASONRY CONSTRUCTION; RETAINING WALLS;

WALLS (STRUCTURAL PARTITIONS);

EID: 84871543933     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000297     Document Type: Article

References (48)

1. Alcaino, P., and Santa Maria, H. (2008). "Experimental response of externally retrofitted masonry walls subjected to shear loading." J. Compos. Constr., 12(5), 489-498.
2. Almusallam, T. H., and Al-Salloum, Y. A. (2007). "Behaviour of FRP strengthened infill walls under in-plane seismic loading." J. Compos. Constr., 11(3), 308-318.
3. American Concrete Institute (ACI). (2010). "Guide for the design and construction of externally bonded fiber reinforced polymer systems for strengthening unreinforced masonry structures." ACI440.7R-10, Farmington Hills, MI.
4. Ascione, L., Feo, L., and Fraternali, F. (2005). "Load carrying capacity of 2D FRP/strengthened masonry structures." Composites, Part B, 36(8), 619-626.
5. Chuang, S. W., Zhuge, Y., Wong, T. Y., and Peters, L. (2003). "Seismic retrofitting of unreinforced masonry walls by FRP strips." 2003 Pacific Conf. on Earthquake Engineering, New Zealand National Society for Earthquake Engineering, Wellington, New Zealand.
6. Corradi, M., Borri, A., and Vignoli, A. (2002). "Strengthening techniques tested on masonry structures struck by the Umbria-Marche earthquake of 1997-1998." Constr. Build. Mater., 16(4), 229-239.
7. Ehsani, M. R., Saadatmanesh, H., and Velazquez-Dimas, J. I. (1999). "Behavior of retrofitted URM walls under simulated earthquake loading." J. Compos. Constr., 3(3), 134-142.
8. ElGawady, M. A., Lestuzzi, P., and Badoux, M. (2005). "In-plane seismic response of URM walls upgraded with FRP." J. Compos. Constr., 9(6), 524-534.
9. Engebretson, D., Sen, R., Mullins, G., and Hartley, A. (1996). "Strengthening concrete block walls using carbon fiber." Proc., Materials Engineering Conf.: Materials for the New Millenium, K. P. Chong, eds., Vol. 1, ASCE, New York, 38-53.
10. Faella, G., Manfredi, G., and Realfonzo, R. (1992). "Cyclic behaviour of tuff masonry walls under horizontal loading." 6th Canadian Masonry Symp., Univ. of Saskatchewan Press, Saskatoon, Canada.
11. Farshchi, D. M., and Marefat, M. S. (2008). "Numerical study of in-plane behavior of masonry walls strengthened by vertical CFRP strips." 4th Int. Conf. on FRP Composites in Civil Engineering (CICE2008), EMPA, Duebendorf, Switzerland.
12. Gabor, A., Bennani, A., Jacquelin, E., and Lebon, F. (2006). "Modelling approaches of the inplane shear behaviour of unreinforced and FRP strengthened masonry panels." Compos. Struct., 74(3), 277-288.
13. Gabor, A., Ferrier, E., Jacquelin, E., and Hamelin, P. (2005). "Analysis of the in-plane shear behaviour of FRP reinforced hollow brick masonry walls." Struct. Eng. Mech., 19(3), 237-260.
14. Grande, E., Imbimbo, M., and Sacco, E. (2011). "Bond behaviour of CFRP laminates glued on clay bricks: Experimental and numerical study." Composites, Part B, 42(2), 330-340.
15. Grande, E., Milani, G., and Sacco, E. (2008). "Modelling and analysis of FRP-strengthened masonry panels." Eng. Struct., 30(7), 1842-1860.
16. Grando, S., Valluzzi, M. R., Modena, C., and Tumialan, J. G. (2003). "Shear strengthening of URM clay walls with FRP systems." 6th Int. Conf.: Advancing with Composites, I. Crivelli-Visconti, ed., Milan, Italy, 179-186.
17. Haroun, M. A., and Ghoneam, E. H. (1996). "Nonlinear finite element analysis of masonry infilled reinforced concrete frames." Proc., 11th Conf. Engineering Mechanics, Vol. 2, Y. K. Lin and T. C. Su, eds., ASCE, New York, 1022-1025.
18. Haroun, M. A., and Ghoneam, E. H. (1997). "Seismic performance testing of masonry-infilled frames retrofitted by fiber composite." Proc., Int. Modal Analysis Conf.-IMAC (Orlando, FL, USA 1997), Vol. 2, Society for Experimental Mechanics, Bethel, CT, 1650-1656.
19. Holberg, A. M., and Hamilton, H. R. (2002). "Strengthening URM with GFRP composites and ductile connections." Earthquake Spectra, 18(1), 63-84.
20. ICC Evaluation Services. (2007). "Acceptance criteria for concrete and reinforced and unreinforced masonry strengthening using externally bonded fiber-reinforced polymer (FRP) composite systems." AC125, ICC, Whittier, CA.
21. Lignola, G. P., Ceroni, F., Balsamo, A., Prota, A., and Manfredi, G. (2012). "Externally bonded masonry structures." Wiley encyclopedia of composites, L. Nicolais and A. Borzacchiello, eds., Wiley, New York.
22. Lignola, G. P., Cuzzilla, R., Prota, A., and Manfredi, G. (2010). "Nonlinear modeling of masonry: Effect of different brickworks and specific energy of materials." 14th European Conf. on Earthquake Engineering, Macedonian Association for Earthquake Engineering, Skopje, Macedonia, 630.
23. Lignola, G. P., Cuzzilla, R., Prota, A., and Manfredi, G. (2011). "Influence of compression and tension fracture energies on different brickwork masonry panels." 11th North American Masonry Conf. (NAMC), Paper 1.02-4, A. E. Schultz, J. S. Weeks, O. Bigelow, and J. B. Popehn, eds., Omnipress, Madison, WI.
24. Lignola, G. P., Prota, A., and Manfredi, G. (2009). "Nonlinear analyses of tuff masonry walls strengthened with cementitious matrix-grid composites." J. Compos. Constr., 13(4), 243-251.
25. Lourenço, P. B. (1996). "Computational strategies for masonry structures." Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
26. Manie, J., and Kikstra, W. P. (2007). DIANA-9.2 User's Manual, 1st Ed., TNO DIANA BV, Delft, The Netherlands.
27. Marcari, G., Manfredi, G., Prota, A., and Pecce, M. (2007). "In-plane shear performance of masonry panels strengthened with FRP." Composites, Part B, 38(7-8), 887-901.
28. Marshall, O. S., and Sweeney, S. C. (2002). "In-plane shear performance of masonry walls strengthened with FRP." 47th Int. SAMPE Symp. and Exhibition, B. M. Rasmussen, L. A. Pilato, and H. S. Kliger, eds., SAMPE Publishing, Covina, CA, 929-940.
29. Nanni, A., Galati, N., and Tumialan, J. G. (2003). "Outline of provisional design protocols and field applications of strengthening of URM walls." Advancing with Composites, Plast 2003, Milan, Italy, 187-197.
30. National Research Council (CNR). (2004). "Guide for the design and construction of externally bonded FRP systems for strengthening existing structures." CNR-DT200, Rome, Italy.
31. Oliveira, D. V., Basilio, I., and Lourenço, P. B. (2011). "Experimental bond behavior of FRP sheets glued on brick masonry." J. Compos. Constr., 15(1), 32-41.
32. Page, A. W. (1978). "Finite element model for masonry." J. Struct. Div., 104(8), 1267-1285.
33. Prakash, S. S., and Alagusundaramoorthy, P. (2006). "Numerical study on masonry load bearing walls retrofitted with GFRP composites." 3rd Int. Conf. on FRP Composites in Civil Engineering (CICE 2006), A. Mirmiran and A. Nanni, eds., International Institute of FRP in Construction, USA, 399-403.
34. Prota, A., Manfredi, G., and Nardone, F. (2008). "Assessment of design formulas for in-plane FRP strengthening of masonry walls." J. Compos. Constr., 12(6), 643-649.
35. Prota, A., Marcari, G., Fabbrocino, G., Manfredi, G., and Aldea, C. (2006). "Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites." J. Compos. Constr., 10(3), 223-233.
36. Schwegler, G. (1995). "Masonry construction strengthened with fiber composites in seismically endangered zones." 10th European Conf. on Earthquake Engineering, Vol. I, A. A. Balkema, Rotterdam, Netherlands, 467-476.
37. Stratford, T., and Burgoyne, C. (2003). "Shear analysis of concrete with brittle reinforcement." J. Compos. Constr., 7(4), 323-330.
38. Stratford, T., Pascale, G., Manfroni, O., and Bonfiglioli, B. (2004). "Shear strengthening masonry panels with sheet GFRP." J. Compos. Constr., 8(5), 434-443.
39. Tan, K. H., and Patoary, M. K. H. (2004). "Strengthening of masonry walls against out-of plane loads using fiber-reinforced polymer reinforcement." J. Compos. Constr., 8(1), 79-87.
40. Tinazzi, D., and Nanni, A. (2000). "Assessment of technologies of masonry retrofitting with FRP." Technical Rep., Center for Infrastructure Engineering Studies, Univ. of Missouri-Rolla, Rolla, MO. http://www .quakewrap.com/frppapers/AssessmentofTechnologiesofMasonry RetrofittingwithFRP. pdf (Sep. 2012).
41. Triantafillou, T. C. (1998). "Strengthening of masonry structures using epoxy-bonded FRP laminates." J. Compos. Constr., 2(2), 96-104.
42. Triantafillou, T. C., and Antonopoulos, C. P. (2000). "Design of concrete flexural members strengthened in shear with FRP." J. Compos. Constr., 4(4), 198-205.
43. Valluzzi, M. R., Tinazzi, D., and Modena, C. (2002). "Shear behavior of masonry panels strengthened by FRP laminates." Constr. Build. Mater., 16(7), 409-416.
44. Van Zijl, G. P. A. G., and de Vries, P. A. (2005). "Masonry wall crack control with carbon fiber reinforced polymer." J. Compos. Constr., 9(1), 84-89.
45. Verhoef, L. G. W., and van Zijl, G. P. A. G. (2002). "Re- strengthening of brickwork to reduce crack width." Adv. Eng. Softw., 33(1), 49-57.
46. Zhao, T., Zhang, C. J., and Xie, J. (2003). "Experimental study on earthquake strengthening of brick walls with continuous carbon fibre sheet." Masonry Int., 16(1), 21-25.
47. Zhao, T., Zhang, C. J., and Xie, J. (2004). "Shear behavior of UCMWusing CFRP sheet: A case study." TMS J., 2(1), 87-95.
48. Zhuge, Y. (2008). "Numerical study of URM walls retrofitted with cable and FRP." 14th Int. Brick and Block Masonry Conf., Paper No. 106, University of Newcastle, Australia.