CaCO3 in situ treated bamboo pulp fiber reinforced composites obtained by vacuum-assisted resin infusion

Wood Science and Technology

Volumn 51, Issue 3, 2017, Pages 571-584

  Wang, Cuicui ^a   Wang, Ge ^b   Cheng, Haitao ^b   Zhang, Shuangbao ^a   Smith, Lee M ^c   Shi, Sheldon Q ^c  

^a BEIJING FORESTRY UNIVERSITY   (China)

^b INTERNATIONAL CENTER FOR BAMBOO AND RATTAN   (China)

^c Center for Advanced Research and Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BAMBOO; BANDPASS FILTERS; BENDING STRENGTH; CALCIUM CARBONATE; DECOMPOSITION; DYNAMIC MECHANICAL ANALYSIS; FIBER REINFORCED PLASTICS; IMPACT STRENGTH; PREFORMING;

CONTROL SAMPLES; CRYSTAL FIELDS; FLEXURAL PROPERTIES; IMPACT PROPERTY; SIZE EFFECTS; TEMPERATURE RANGE; THERMAL DECOMPOSITION TEMPERATURE; VACUUM ASSISTED RESIN INFUSIONS;

EPOXY RESINS;

BAMBOO; COMPOSITES; DECAY;

EID: 85014912811     PISSN: 00437719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00226-017-0900-2     Document Type: Article

References (39)

1. Agirregomezkorta A, Martinez AB, Sanchez-Soto M, Aretxaga G, Sarrionandia M, Aurrekoetxea J (2012) Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion. Compos Part B Eng 43:2249–2256
2. Akil HM, Omar MF, Mazuki AAM, Safiee S, Ishak ZAM, Abu Bakar A (2011) Kenaf fiber reinforced composites: a review. Mater Des 32:4107–4121
3. Allan GG, Negri AR, Ritzenthaler P (1992) The microporosity of pulp the properties of paper made from pulp fibers internally filled with calcium carbonate. Tappi J 75:239–244
4. ASTM D7028-07e1 Standard test method for glass transition temperature (DMA Tg) of polymer matrix composites by dynamic mechanical analysis (DMA). American Society for Testing and Materials, West Conshohocken
5. ASTM D790-10 (2010) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. American Society for Testing and Materials, 2010, West Conshohocken
6. ASTM D6110-10 (2010) Standard test method for determining the charpy impact resistance of notched specimens of plastics. American Society for Testing and Materials, 2010, West Conshohocken
7. Brouwer WD, van Herpt ECFC, Labordus A (2003) Vacuum injection moulding for large structural applications. Compos Part A Appl Sci Manuf 34:551–558
8. Cecen V, Sarikanat M (2008) Experimental characterization of traditional composites manufactured by vacuum-assisted resin-transfer molding. J Appl Polym Sci 107:1822–1830
9. Cheng HT, Gao J, Wang G, Shi SQ, Zhang ShB, Cai LP (2014) Effect of temperature on calcium carbonate deposition in situ on bamboo fiber and polymer interfaces. Wood Fiber Sci 46:247–258
10. Cheng HT, Gao J, Wang G, Shi SQ, Zhang ShB, Cai LP (2015) Enhancement of mechanical properties of composites made of calcium carbonate modified bamboo fibers and polypropylene. Holzforschung 69:215–221
11. Chinese standard GB/T 742-2008, Fibrous raw material, pulp, paper and board—determination of ash. Standardization Administration of the Peoples Republic of China, 2008
12. Feng Z, Alén R, Niemelä K (2002) Formation of aliphatic carboxylic acids during soda-AQ pulping of kenaf bark. Holzforschung 56:388–394
13. Fiorelli J, Rempe N, Molina JC, Dias AA (2015) Natural fiber-reinforced polymer for structural application. In: Agricultural biomass based potential materials. Springer, Berlin, pp 35–49
14. Gohil PP, Chaudhary V, Shaikh AA (2015) Natural fiber-reinforced composites: potential, applications, and properties. In: Agricultural biomass based potential materials. Springer, Berlin, pp 51–72
15. Haameem JAM, Abdul Majid MS, Afendi M, Marzuki HFA, Fahmi I, Gibson AG (2016) Mechanical properties of Napier grass fibre/polyester composites. Compos Struct 136:1–10
16. 3 content on mechanical properties of HDPE/CF composites. Eng Plast Appl 42:30–33
17. Leong YW, Ishak ZAM, Ariffin A (2004) Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites. J Appl Polym Sci 91:3327–3336
18. Li J (2008) Biomass composite materials. Science Press, Beijing
19. 3 ternary composites. Polym Plast Technol Eng 47:1227–1230
20. Liang KW, Shi SQ, Nicholas DD, Sites L (2013) Accelerated weathering test of kenaf fiber unsaturated polyester sheet molding compounds. Wood Fiber Sci 45:42–48
21. Liang K, Shi SQ, Wang G (2014) Effect of impregnated inorganic nanoparticles on the properties of the kenaf bast. Fibers 2:242–254
22. Lu B, Zhang LW, Zeng JCh (2005) Natural fiber composites material (Version 1). Chemical Industry Press, Beijing
23. 3. Chin Plast 14:25–29
24. Park SY, Choi HS, Choi WJ, Kwon H (2012) Effect of vacuum thermal cyclic exposures on unidirectional carbon fiber/epoxy composites for low earth orbit space applications. Compos Part B Eng 43:726–738
25. Renneckar S, Zink-Sharp AG, Ward TC, Glasser WG (2004) Compositional analysis of thermoplastic wood composites by TGA. J Appl Polym Sci 93:1484–1492
26. Rudd CD, Long AC, Kendall KN, Mangin C (1997) Liquid moulding technologies. Rapra Technology Limited Press, Oxford
27. Shi SQ, Gardner DJ (2006) Hygroscopic thickness swelling rate of compression molded wood fiber board and wood fiber/polymer composites. Compos Part A Appl Sci Manuf 37:1276–1285
28. Shi SQ, Wu D (2009) Modeling moisture absorption process of wood-based composites under over-saturated moisture conditions using two-part equations. Wood Sci Technol 43:143–152
29. Shi JSh, Shi SQ, Barnes HM, Horstemeyer MF, Wang G (2011) Kenaf bast fibers-Part II inorganic nanoparticle impregnation for polymer composites. Int J Polym Sci 2011:736474-1–736474-7. doi:10.1155/2011/736474
30. 3. Acta Phys Chim Sin 23:717–722
31. Vukušić I (2014) Comparison of mechanical properties of composites reinforced with natural and glass fiber. Master’s thesis (Bologna) Fakultet strojarstva i brodogradnje, Sveučilište u Zagrebu, Zagreb
32. 3 nanoparticle treated kenaf fiber reinforced composites. Compos Part B Eng 78:138–143
33. Xia ChL, Shi SQ, Cai LP, Hua J (2015b) Property enhancement of kenaf fiber composites by means of vacuum-assisted resin transfer molding (VARTM). Holzforschung 69:307–312
34. Xia ChL, Shi SQ, Cai LP, Nasrazadani S (2015c) Increasing inorganic nanoparticle impregnation efficiency by external pressure for natural fibers. Ind Crops Prod 69:395–399
35. Xian Y, Wang CC, Wang G, Ren WH, Cheng HT (2016) Understanding the mechanical and interfacial properties of core-shell structured bamboo-plastic composites. J Appl Polym Sci 133:43053
36. 3 and its thermal decomposition. Chem J Chin Univ 21:1555–1559
37. Zampaloni M, Pourboghrat F, Yankovich SA, Rodgers BN, Moore J, Drzal LT, Mohanty AK, Misra M (2007) Kenaf natural fiber reinforced polypropylene composites: a discussion on manufacturing problems and solutions. Compos Part A Appl Sci Manuf 38:1569–1580
38. Zhang XM, Liu XY (2006) Fiber reinforced thermoset composites and its application. Chemical Industry Press, Beijing
39. Zhang MQ, Rong MZh (2003) Performance improvement of polymers by the addition of grafted nano inorganic particles. Chin J Polym Sci 21:587–602