Effect of temperature on calcium carbonate deposition in situ on bamboo fiber and polymer interfaces

Wood and Fiber Science

Volumn 46, Issue 2, 2014, Pages 247-258

  Cheng, Haitao ^a   Gao, Jie ^a   Wang, Ge ^a   Shi, Sheldon Q ^b   Zhang, Shuangbao ^a   Cai, Liping ^b  

^a BEIJING FORESTRY UNIVERSITY   (China)

^b Center for Advanced Research and Technology   (United States)

Author keywords

Bamboo fibers; Calcium carbonate; Composites; Interface interphase; Mechanical properties; Poly(propylene) (PP)

Indexed keywords

BAMBOO; CALCIUM CARBONATE; COMPOSITE MATERIALS; FIBERS; FILLED POLYMERS; MECHANICAL PROPERTIES; POLYPROPYLENES; REINFORCED PLASTICS; REINFORCEMENT; TENSILE STRENGTH; TENSILE TESTING;

BAMBOO FIBERS; CALCIUM CARBONATE DEPOSITION; EFFECT OF TEMPERATURE; INORGANIC MATERIALS; INTERFACE/INTERPHASES; POLYMER INTERFACES; REACTION TEMPERATURE; TREATMENT TEMPERATURE;

POLYMER MATRIX COMPOSITES;

EID: 84924269762     PISSN: 07356161     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Mater Sci Eng Rep 28(1-2):1-63.
2. Allan GG, Negri AR, Ritzenthaler P (1992) The microporosity of pulp: The properties of paper made from pulp fibers internally filled with calcium carbonate. Tappi J 75(3):239-244.
3. Altay E, Shahwan T, TanogǧluM(2007) Morphosynthesis of CaCO3 at different reaction temperatures and the effects of PDDA, CTAB, and EDTA on the particle morphology and polymorph stability. Powder Technol 178(3):194-202.
4. Amaral M, Lopes MA, Santos JD, Silva RF (2002) Wettability and surface charge of Si3N4-bioglass composites in contact with simulated physiological liquids. Biomaterials 23(20):4123-4129.
5. Biswas M, Ray SS (2001) Recent progress in synthesis and evaluation of polymer-montmorillonite nanocomposites. New polymerization techniques and synthetic methodologies, advances in polymer science, Volume 155. Springer, Berlin, pp. 167-221.
6. Chen H, Wang G, Cheng H (2011a) Properties of single bamboo fibers isolated by different chemical methods. Wood Fiber Sci 43(2):111-120.
7. Chen H, Wang G, Cheng H, Cao S, Gao J (2011b) Effects of different chemical maceration methods on the surface wetting properties and section shapes of single bamboo fibers. Journal of Beijing Forestry University 33(01):115-118.
8. Chen J, Yan N (2012) Hydrophobization of bleached softwood kraft fibers via adsorption of organo-nanoclay. Bioresources 7(3):4132-4149.
9. Chen J, Yan N (2013) Mechanical properties and dimensional stability of organo-nanoclay modified biofiber polymer composites. Compos, Part B Eng 47:248-254.
10. Cheng H, Wang G, Shen X, Chen H, Zhang S (2013) Single fiber contact angle measured by different methods and correlation analysis. China Forest Products Industry 40:49-51.
11. Deka BK, Maji TK (2011) Study on the properties of nanocomposite based on high density polyethylene, polypropylene, polyvinyl chloride and wood. Compos Part A-Appl S 42(6):686-693.
12. GB (2006) T 1040.3-2006. Plastics. Determination of tensile properties. Part 3: Test conditions for films and sheets. Standardization Administration of the People's Republic of China, Beijing, China.
13. GB (2009) T 742-2008. Fibrous raw material, pulp, paper and board - Determination of ash. Standardization Administration of the People's Republic of China, Beijing, China.
14. Gopi SP, Subramanian VK (2012) Polymorphism in CaCO3 - Effect of temperature under the influence of EDTA (di sodium salt). Desalination 297:38-47.
15. Green HVDD (1985) Lumen-loaded paper pulp, its production and use. US Patent 4,510,020.
16. Huang JH, Mao ZF, Luo MF (2007) Effect of anionic surfactant on vaterite CaCO3. Mater Res Bull 42(12):2184-2191.
17. Jacob A (2006) WPC industry focuses on performance and cost. Reinforced Plastics 50(5):32-33.
18. Khunová V, Hurst J, Janigová I, Smatko V (1999) Plasma treatment of particulate polymer composites for analyses by scanning electron microscopy: II. A study of highly filled polypropylene/calcium carbonate composites. Polym Test 18(7):501-509.
19. Kuusipalo J, Kaunisto M, Laine A, Kellomaki M (2005) Chitosan as a coating additive in paper and paperboard. Tappi J 4(8):17-21.
20. Leong YW, Ishak ZAM, Ariffin A (2004) Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites. J Appl Polym Sci 91(5):3327-3336.
21. Lutton CW (1952) Production of pigmented cellulosic pulp. US Patent 2,583,548.
22. Mannelquist A, Almqvist N, Fredriksson S (1998) Influence of tip geometry on fractal analysis of atomic force microscopy images. Appl Phys A-Mater 66(1):S891-S895.
23. Raj RG, Kokta BV, Grouleau G, Daneault C (1990) The influence of coupling agents on mechanical properties of composites containing cellulosic fillers. Polymer-Plastics Technology and Engineering 29(4):339-353.
24. Schmidt D, Shah D, Giannelis EP (2002) New advances in polymer/layered silicate nanocomposites. Curr Opin Solid St M 6(3):205-212.
25. Shi J, Shi S, Barnes HM, Horstemeyer MF, Wang G (2011) Kenaf bast fibers - Part II: Inorganic Nanoparticle Impregnation for Polymer Composites. International Journal of Polymer Science. Volume 2011, Article ID 736474, 7 pages (doi:10.1155/2011/736474).
26. Tang W, Wang Y (2012) Fractal characterization of impact fracture surface of steel. Appl Surf Sci 258(10):4777-4781.
27. Wan J, Wang Y, Xiao Q (2010) Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Biores Technol 101(12):4577-4583.
28. Wang G, Yu Y, Shi S, Wang J, Cao S, Cheng H (2011) Microtension test method for measuring tensile properties of individual cellulosic fibers.Wood Fiber Sci 43(3):251-261.
29. Wu XF, Dzenis YA (2006) Droplet on a fiber: Geometrical shape and contact angle. Acta Mech 185(3-4):215-225.
30. Yamaki J, Katayama Y (1975) New method of determining contact angle between monofilament and liquid. J Appl Polym Sci 19(10):2897-2909.