Cold-Formed Tubular Members and Connections

Cold-formed Tubular Members and Connections

Volumn , Issue , 2005, Pages

  Hancock, Greg ^a   Wilkinson, Tim ^b   Zhao, Xiao Ling ^c  

^a UNIVERSITY OF SYDNEY   (Australia)

^b UNIVERSITY OF OTAGO   (New Zealand)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013734800     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-044101-6.X5000-2     Document Type: Book

References (375)

1. AIJ Standard for Limit State Design of Steel Structures 1990, Architectural Institute of Japan.
2. AIJ Recommendations for the Design and Fabrication of Tubular Structures in Steel 1990, Architectural Institute of Japan, Tokyo, Japan.
3. AISC Hollow Structural Sections Connections Manual 1997, American Institute of Steel Construction, Tokyo, Japan.
4. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings 1999, American Institute of Steel Construction, Chicago, Illinois, USA.
5. AISC Load and Resistance Factor Design Specification for Steel Hollow Structural Sections 2000, American Institute of Steel Construction, Chicago, Illinois, USA.
6. ASI Pre-engineered Connections for Structural Steel Hollow Sections 1997, Australian Steel Institute, Chicago, Illinois, USA.
7. ASI Design Capacity Tables for Structural Steel - Volume 2: Hollow Sections 1999, Australian Steel Institute, Sydney, Australia.
8. ASTM Standards Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 1993, American Society for Testing Materials ASTM A500, Sydney, Australia.
9. BCJ Design and Fabrication Manual for Cold-Formed Square Tubes 1996, The Building Centre of Japan, USA.
10. Bergmann R., Matsui C., Meinsma C., Dutta D. Design Guide for Concrete Filled Hollow Section Columns under Static and Seismic Loading 1995, TüV-Verlag, Tokyo, Japan.
11. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, Köln, Germany.
12. BSI Structural use of Steelwork in Building 1998, BS 5950, Part 5, British Standard Institution, London, UK.
13. th International Symposium on Tubular Structures 1998.
14. CSA-S16 Steel Structures for Buildings (Limit State Design) 2001, CSA-S16-01, Canadian Standards Association, London, UK.
15. CSA-S136 Cold-Formed Steel Structural Members 2001, CSA-S136-01, Canadian Standards Association, Toronto, Ontario, Canada.
16. th International Symposium on Tubular Structures 1993, E & FN Spon, Toronto, Ontario, Canada.
17. Dutta D., Wardenier J., Yeomans N., Sakae K., Bucak ö, Packer J.A. Design Guide for Fabrication, Assembly and Erection of Hollow Section Structures 1998, TüV-Verlag, London, UK.
18. Dutta D. Structures with Hollow Sections 2000, Ernst & Eohn, Köln, Germany.
19. Eekhout M. Tubular Structures in Architecture 1996, Delft University of Technology, Darmstadt, Germany.
20. EC3 Eurocode 3: Design of Steel Structures - Part 1.1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardization, Delft, The Netherlands.
21. EC3 Eurocode 3: Design of Steel Structures - Part 1.3: Supplementary Rules for Cold-Formed Members and Sheeting, EN 1993-1-3: 2004, 1 March 2004 2004, European Committee for Standardization, Brussels, Belgium.
22. ENV European Committee for Standardization, European Pre-Standard ENV 10219, Cold-Formed Welded Structural Hollow Sections of Non-Alloyed and Fine Grained Steels, Part 1 Technical Delivery condition, Part 2 Tolerances 1992, Dimensions and Section Properties, British Standards Institution, Brussels, Belgium.
23. th International Symposium on Tubular Structures 1996.
24. th International Symposium on Tubular Structures 1994.
25. Han L.H., Zhong S.T. Mechanics of Concrete Filled Steel Tubes 1996, (in Chinese), Dalian University of Technology Press, London, UK.
26. Hancock G.J. Design of Cold-Formed Steel Structures 1998, Australian Institute of Steel Construction, Dalian, P.R. China. 3rd edition.
27. Hancock G.J., Murray T, Ellifritt D. Cold-Formed Steel Structures to the AISI Specification 2001, Marcel Dekker, Inc., Sydney, Australia.
28. st International Symposium on Tubular Structures 1984, Pergamon Press, New York, USA.
29. th International Symposium on Tubular Structures 2003.
30. JIS Carbon Steel Tubes for General Structural Purposes 1988, Japanese Industrial Standard, G3444, Oxford, UK.
31. JIS Carbon Steel Square Pipe for General Structural Purposes 1988, Japanese Industrial Standard, G3466, Tokyo, Japan.
32. nd International Symposium on Tubular Structures 1986, Architectural Institute of Japan, Tokyo, Japan.
33. Kurobane Y., Packer J.A., Wardenier J., Yeomans N. Design Guide for Structural Hollow Section Column Connections 2005, TüV-Verlag, Tokyo, Japan.
34. Lindsey S.D. Future Directions of AISC Specifications for Steel Buildings. Practice Periodical on Structural Design and Construction, ASCE 2003, 8(3):130-132.
35. Marshall P.W. Design of Welded Tubular Connections - Basis and Use of AWS Code Provisions 1992, Elsevier Science Publishers, Köln, Germany.
36. NAS North American Specification for the Design of Cold-Formed Steel Structural Members 2002, American Iron and Steel Institute, Amsterdam, The Netherlands.
37. rd International Symposium on Tubular Structures 1989, Elsevier Applied Science, Washington D.C, USA.
38. NZS Steel Structures Standard, NZS 3404 1997, Part 1, Standards New Zealand, London, UK.
39. Packer J.A., Wardenier J., Kurobane Y., Dutta D., Yeomans N. Design Guide for Rectangular Hollow Section (RHS) Joints under Predominantly Static Loading 1992, TüV-Verlag, Wellington, New Zealand.
40. Packer J.A., Henderson J.E. Hollow Structural Section Connections and Trusses 1997, Canadian Institute of Steel Construction, Köln, Germany.
41. Packer J.A. Tubular Construction. Progress in Structural Engineering and Materials 2000, 2(1):41-49.
42. th International Symposium on Tubular Structures 2001.
43. Rondal J., Wurker K.G., Dutta D., Wardenier J., Yeomans N. Structural Stability of Hollow Sections 1992, TüV-Verlag, Ontario, Canada.
44. SCI Steelwork Design Guide to BS 5950-1:2000, Volume 1 2002, Section Properties and Member Capacities, The Steel Construction Institute, Köln, Germany.
45. Standards Australia Steel Structures Code, Australian Standard AS 1250 1981, Standards Australia, UK.
46. Standards Australia Structural Steel Hollow Sections, Australian Standard AS 1163 1991, Standards Australia, Sydney, Australia.
47. Standards Australia Cold-Formed Steel Structures, Australian Standard AS/NZS 4600 1996, Standards Australia, Sydney, Australia.
48. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Sydney, Australia.
49. Twilt L., Hass R., Klingsch W., Edwards M., Dutta D. Design Guide for Structural Hollow Section Columns Exposed to Fire 1996, TüV-Verlag, Sydney, Australia.
50. Wardenier J. Hollow Section Joints 1982, Delft University Press, Köln, Germany.
51. th International Symposium on Tubular Structures 1991, Delft University Press, Delft, The Netherlands.
52. Wardenier J. Hollow Sections in Structural Applications 2001, CIDECT, The Netherlands.
53. Wardenier J., Kurobane Y., Packer J.A., Dutta D., Yeomans N. Design Guide for Circular Hollow Section (CHS) Joints under Predominantly Static Loading 1991, TüV-Verlag, The Netherlands.
54. Wardenier J., Dutta D., Yeomans N., Packer J.A., Bucak ö. Design Guide for Structural Hollow Sections in Mechanical Applications 1995, TüV-Verlag, Köln, Germany.
55. Zhao X.L., Herion S., Packer J.A., Puthli R., Sedlacek G., Wardenier J., Weynand K., van Wingerde A., Yeomans N. Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading 2001, TüV-Verlag, Köln, Germany.
56. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings 1999, American Institute of Steel Construction, Köln, Germany.
57. ASTM Standards Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 1993, American Society for Testing Materials ASTM A500, Chicago, Illinois, USA.
58. ASTM Standard Test Methods and Definition for Mechanical Testing of Steel Products 1995, ASTM A370, USA.
59. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, USA.
60. Dagg H.M., Davis K., Hicks J.W. Charpy Impact Tests on Cold-Formed RHS Manufactured from Continuous Cast Fully Killed Steel. Proceedings, Pacific Structural Steel Conference 1989.
61. EC3 Eurocode 3: Design of Steel Structures - Part 1.1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardization, London, UK.
62. ENV European Committee for Standardization, European Pre-Standard ENV 10219, Cold-Formed Welded Structural Hollow Sections of Non-Alloyed and Fine Grained Steels, Part 1 Technical Delivery condition, Part 2 Tolerances, Dimensions and Section Properties 1992, British Standards Institution, Brussels, Belgium.
63. Jiao H., Zhao X.L. Imperfection, Residual Stress and Yield Slenderness Limit of Very High Strength (VHS) Circular Steel Tubes. Journal of Constructional Steel Research 2002, 59(2):233-249.
64. JIS Carbon Steel Tubes for General Structural Purposes 1988, Japanese Industrial Standard, G3444, London, UK.
65. JIS Carbon Steel Square Pipe for General Structural Purposes 1988, Japanese Industrial Standard, G3466, Tokyo, Japan.
66. Key P.W., Hancock G.J. An Experimental Investigation of the Column Behaviour of Cold-Formed Square Hollow Sections. Research Report R493 1985, School of Civil and Mining Engineering, The University of Sydney, Tokyo, Japan.
67. Key P.W., Hasan S.W., Hancock G.J. Column Behaviour of Cold-Formed Hollow Sections. Journal of Structural Engineering, ASCE 1988, 114(2):390-407.
68. Key P.W., Hancock G.J. A Theoretical Investigation of the Column Behaviour of Cold-Formed Square Hollow Sections. Thin-Walled Structures 1993, 16(1-4):31-64.
69. Kosteski N., Packer J.A., Puthli R.S. Notch Toughness of Internationally Produced Hollow Sections. Journal of Structural Engineering, ASCE 2005, 131(2):279-286.
70. Ravindra M.K., Galambos T.V. Load and Resistance Factor Design for Steel. Journal of the Structural Division, ASCE 1978, 104(ST9):1337-1353.
71. Standards Australia Structural Steel Hollow Sections, Australian Standard AS 1163 1991, Standards Australia, Sydney, Australia.
72. Standards Australia Methods for Tensile Testing of Metals, Australian Standard AS 1391 1991, Standards Australia, Sydney, Australia.
73. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Sydney, Australia.
74. Standards Australia Structural Design Actions Part 0: General Principles, Australian/New Zealand Standard AS/NZS 1170.0 2002, Standards Australia, Sydney, Australia.
75. Tanaka T., Tabuchi M., Murayama M., Furumi K., Morita T., Usami K., Matsubara Y. Experimental Study on End-plate to SHS Column Connections Reinforced by Increasing Wall Thickness with One Side Bolts. Tubular Structures VII 1996, 253-260. Balkema, Sydney, Australia. J. Farkas, K. Jármai (Eds.).
76. Trahair N.S., Bradford M.A., Nethercot D.A. The Behaviour and Design of Steel Structures to BS5950 2001, Spon Press, Rotterdam, The Netherlands.
77. Wilkinson T. The Plastic Behaviour of Cold-Formed Rectangular Hollow Sections. PhD Thesis, The University of Sydney, Sydney, Australia 1999.
78. Wilkinson T., Hancock G.J. Tests to Examine the Compact Web Slenderness of Cold-Formed RHS. Journal of Structural Engineering, ASCE 1998, 124(10):1166-1174.
79. Wilkinson T., Hancock G.J. Tests to Examine Plastic Behaviour of Knee Joints in Cold-Formed RHS. Journal of Structural Engineering, ASCE 2000, 126(3):297-305.
80. Zhao X.L., Hancock G.J. Tests to Determine Plate Slenderness Limits for Cold-Formed Rectangular Hollow Sections of Grade C450. Steel Construction, Journal of the Australian Institute of Steel Construction 1991, 25(4):2-16.
81. Zhao X.L., Hancock G.J. Tests to Determine the Reliability of Stub Columns of DuraGal RHS. Investigation Report S916 1992, Centre for Advanced Structural Engineering, The University of Sydney, London, UK.
82. Zhao X.L., Grzebieta R.H. Strength and Ductility of Concrete Filled Double Skin (SHS Inner and SHS Outer) Tubes. Thin-Walled Structures 2002, 40(2):199-213.
83. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings, (AISC LRFD) 1999, American Institute of Steel Construction, Sydney, Australia.
84. AISC Load and Resistance Factor Design Specification for Steel Hollow Structural Sections, (AISC LRFD) 2000, American Institute of Steel Construction, Chicago, Illinois, USA.
85. AISC Seismic Provisions for Structural Steel Buildings, (AISC LRFD) 2002, American Institute of Steel Construction, Chicago, Illinois, USA.
86. Bleich F. Buckling Strength of Metal Structures. Engineering Societies Monographs 1952, McGraw-Hill, Chicago, Illinois, USA.
87. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, New York, USA.
88. CAN/CSA-S16-01: Limits States Design of Steel Structures 2001, Toronto, Ontario, Canada, Canadian Standards AssociationCanadian Standards Association.
89. Corona E., Vaze S.P. Buckling of Elastic Plastic Square Tubes Under Bending. International Journal of Mechanical Sciences 1996, Vol 38:753-775. No 7, Elsevier, London, UK.
90. Dawe J.L., Kulak G.L. Plate Instability of W Shapes. Journal of Structural Engineering 1984, Vol 110:1278-1291. No 6, June 1984, American Society of Civil Engineers.
91. Dawe J.L., Kulak G.L. Local Buckling of W Shape Columns and Beams. Journal of Structural Engineering 1984, Vol. 110:134-1292. No 6, June 1984, American Society of Civil Engineers.
92. Dawe J.L., Kulak G.L. Local Buckling Behaviour of Beam-Columns. Journal of Structural Engineering 1986, Vol 112:2447-2461. No 11, November 1986, American Society of Civil Engineers.
93. Elchalakani M., Zhao X.L., Grzebieta R.H. Plastic Slenderness Limit for Cold-Formed Circular Steel Hollow Sections. Australian Journal of Structural Engineering 2002, Vol. 3(No. 3):127-139.
94. Elchalakani M., Zhao X.L., Grzebieta R.H. Bending Tests to Determine Slenderness Limits for Cold-Formed Circular Hollow Sections. Journal of Constructional Steel Research 2002, Vol. 58(No. 11):1407-1430.
95. The b/t Ratios Controlling the Applicability of Analysis Models in Eurocode 3, Document 5.02, Background Documentation to Chapter 5 of Eurocode 3 1989, Eurocode 3 Editorial Group, Aachen University.
96. EC3 Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardisation, Germany.
97. Galambos T.V. Structural Members and Frames. Prentice-Hall Series in Structural Analysis and Design 1968, Prentice-Hall, Brussels, Belgium. W.J. Hall (Ed.).
98. Galambos T.V. Proposed Criteria for Load and Resistance Factor Design of Steel Building Structures. Research Report No 45 1976, (Also published as American Iron and Steel Institute (AISI), Bulletin No 27, January 1978), Civil Engineering Department, Washington University, London, U.K.
99. Haaijer G., Thurlimann B. On Inelastic Buckling in Steel. Journal of the Engineering Mechanics Division 1958, Vol 84. No EM 2, April 1958, Proceedings Paper No 1581.
100. Hasan S.W., Hancock G.J. Plastic Bending Tests of Cold-Formed Rectangular Hollow Sections. Research Report, No R586 1988, 2-19. (also published in Steel Construction, Journal of the Australian Institute of Steel Construction, Vol 23, No 4, November 1989, School of Civil and Mining Engineering, The University of Sydney, St. Louis, Mo., USA.
101. Guide to Stability Design Criteria for Metal Structures. Structural Stability Research Council 1976, John Wiley, Sydney, Australia. 3rd edition. B. Johnston (Ed.).
102. Jouaux R. The plastic behaviour of cold-formed SHS (square hollow sections) under bending and compression. Diploma Thesis, Department of Civil Engineering, The University of Sydney / Fakultät für Bauingenieur-, Geo-, und Umweltwissenschaften, Universität Karlsruhe 2004, 2004.
103. Kato B. Buckling Strength of Plates in the Plastic Range. Publications, International Association for Bridge and Structural Engineering 1965, Vol 25:127-141. 1965.
104. Korol R.M., Hudoba J. Plastic Behaviour of Hollow Structural Sections. Journal of the Structural Division 1972, Vol 98:1007-1023. No ST5, American Society of Civil Engineers.
105. Lay M.G. Flange Local Buckling in Wide-Flange Shapes. Journal of the Structural Division 1965, Vol 91:95-116. No ST6, December 1965, American Society of Civil Engineers.
106. Lukey A.F., Adams P.F. Rotation Capacity of Beams Under Moment Gradient. Journal of the Structural Division 1969, Vol 95:1173-1188. No ST6, American Society of Civil Engineers.
107. Sherman D.R. Inelastic Flexural Buckling of Cylinders. Steel Structures, Recent Research Advance and Their Applications to Design, Proceedings of the invited papers for the International Conference 1986, 339-357. M.N. Pavlovic (Ed.).
108. Ostapenko A. Local Buckling. Structural Steel Design 1983, Chapter 17, Robert Kreiger Publishing. 2nd edition. L. Tall (Ed.).
109. Pi Y.L., Trahair N.S. Lateral buckling strengths of cold-formed rectangular hollow sections. Thin-Walled Structures 1995, Volume 22(Issue 2):71-95.
110. Standards Australia Australian Standard AS 4100 Steel Structures 1998, Standards Australia, Malabar, Florida, USA.
111. Stranghöner N. Untersuchungen zum Rotationsverhakten von Trägern aus Hohloprofilen. PhD Thesis, Institute of Steel Construction, University of Technology, Aachen, Germany 1995.
112. Timoshenko S., Gere J. Theory of Elastic Stability 1969, McGraw-Hill, Sydney, Australia. 2nd edition.
113. Trahair N.S., Hogan T.J., Syam A.A. Design of Unbraced Beams. Steel Construction, Journal of the Australian Institute of Steel Construction 1993, Vol 27(No 1):2-26.
114. Trahair N.S. Flexural Torsional Buckling of Structures 1993, EF & N Spon, New York, New York, USA.
115. Ueda Y., Tall L. Inelastic Buckling of Plates with Residual Stresses. Publications 1967, Vol 27:211-254. 1967, International Association for Bridge and Structural Engineering, London.
116. Wilkinson T., Hancock G.J. Tests to examine the compact web slenderness of cold-formed RHS. Journal of Structural Engineering 1998, Vol 124:1166-1174. No 10, October 1998, American Society of Civil Engineers.
117. Wilkinson T. Recommendations for Cold-Formed RHS in Bending and Compression. Tubular Structures X, Proceedings of the 10th International Symposium on Tubular Structures 2003, 293-300. Madrid Spain, Jaurrieta, Alonso, Chica (Eds.).
118. Zhao X.L., Hancock G.J. Tests to Determine Plate Slenderness Limits for Cold-Formed Rectangular Hollow Sections of Grade C450. Steel Construction, Journal of Australian Institute of Steel Construction 1991, Vol 25(No 4):2-16. November 1991.
119. Zhao X.L., Hancock G.J., Trahair N.S. Lateral Buckling Tests of Cold-Formed RHS Beams. Journal of Structural Engineering 1995, Vol 121:1565-1573. No 11, November 1995, American Society of Civil Engineers.
120. Zhao X.L., Hancock G.J., Trahair N.S., Pi Y.L. Lateral Buckling of RHS Beams. Structural Stability and Design 1995, 55-60. Balkema. S. Kitipornchai, G.J. Hancock, M. Bradford (Eds.).
121. AISC Load and Resistance Factor Design Specification for Steel Hollow Structural Sections 1999, American Institute of Steel Construction, Rotterdam, The Netherlands.
122. Beedle L.S. Why are Specifications Different?. Journal of Constructional Steel Research 1992, 17(1-2):1-30.
123. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, Chicago, Illinois, USA.
124. EC3 Eurocode 3: Design of Steel Structures - Part 1.1: General Rules and Rules for Buildings, prEN 1993-1-:2003, November 2003 2003, European Committee for Standardization, London, UK.
125. Hancock G.J., Zhao X.L. Research Into the Strength of Cold-Formed Tubular Sections. Journal of Constructional Steel Research 1992, 23(1-3):55-72.
126. Johnston B.G. Guide to Stability Design for Metal Structures 1976, Wiley-Interscience, Brussels, Belgium. 3rd Edition.
127. Key P.W. The Behaviour of Cold-Formed Square Hollow Section Columns. PhD Thesis, The University of Sydney, Sydney, Australia 1988.
128. Rondal J., Wurker K.G., Dutta D., Wardenier J., Yeomans N. Structural Stability of Hollow Sections 1992, TüV-Verlag, New York, USA.
129. Rotter J.M. Multiple Column Curves by Modifying Factors. Journal of the Structural Division, ASCE 1982, 108(ST7):1665-1669.
130. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Köln, Germany.
131. Sherman D. Tubular Members. Constructional Steel Design: An International Guide 1992, 91-104. Elsevier Applied Science, Sydney, Australia. P.J. Dowling, J.E. Harding, R. Bjorhovde (Eds.).
132. SSRC Stability of Metal Structures - A World View 1991, Structural Stability Research Council, London, UK. 2nd Edition.
133. Trahair N.S., Bradford M.A. The Behaviour and Design of Steel Structures 1988, Chapman and Hall, USA.
134. Zhao X.L., Lim P., Joseph P., Pi Y.L. Member Capacity of Columns with Semi-Rigid End Conditions in Oktalok Space Frames. Structural Engineering and Mechanics - An International Journal 2000, 10(1):27-36.
135. Zhao X.L., Grzebieta R.H. Strength and Ductility of Concrete Filled Double Skin (SHS inner and SHS outer) Tubes. Thin-Walled Structures 2002, 40(2):193-213.
136. Zhao X.L., Grzebieta R.H., Elchalakani M. Tests of Concrete-Filled Double Skin CHS Composite Stub Columns. Steel & Composite - An International Journal 2002, 2(2):129-146.
137. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings, (AISC LRFD) 1999, American Institute of Steel Construction, London, UK.
138. AISC Load and Resistance Factor Design Specification for Steel Hollow Structural Sections, (AISC LRFD) 2000, American Institute of Steel Construction, Chicago, Illinois, USA.
139. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, Chicago, Illinois, USA.
140. Canadian Standards Association CAN/CSA-S16-01: Limits States Design of Steel Structures 2001, Toronto, Ontario, Canada.
141. Clarke M.J., Hancock G.J., Wilkinson T. Steel Structures 1: Lecture Notes 2004, Department of Civil Engineering, The University of Sydney, London, UK.
142. Dean M., Wilkinson T., Hancock G.J. Bending and Compression Tests of Rectangular Hollow Sections. Tubular Structures IX 2001, 349-358. Balkema, Sydney, Australia. R. Puthli, S. Herion (Eds.).
143. Dawe J.L., Kulak G.L. Plate Instability of W Shapes. Journal of Structural Engineering 1984, Vol 110:1278-1291. No 6, June 1984, American Society of Civil Engineers, Rotterdam, The Netherlands.
144. Dawe J.L., Kulak G.L. Local Buckling of W Shape Columns and Beams. Journal of Structural Engineering 1984, Vol 110:1134-1292. No 6, June 1984, American Society of Civil Engineers.
145. Dawe J.L., Kulak G.L. Local Buckling Behaviour of Beam-Columns. Journal of Structural Engineering 1986, Vol 112:2447-2461. No 11, November 1986, American Society of Civil Engineers.
146. Dong X. Finite Element Analysis of Plastic Bending of Cold-Formed Rectangular Hollow Section Beam-Columns, Masters Thesis, Department of Civil Engineering 2001, The University of Sydney.
147. Engineering Systems Microstran 2004, http://www.micorostran.com.au, Structural Analysis Software, Sydney Australia.
148. EC3 Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardisation.
149. Haaijer G., Thurlimann B. On Inelastic Buckling in Steel. Journal of the Engineering Mechanics Division 1958, Vol 84. No EM 2, April 1958, Proceedings Paper No 1581.
150. Standards Australia Australian Standard AS 4100 Steel Structures 1998, Standards Australia, Brussels, Belgium.
151. Sully R.M. The Behaviour of Cold-Formed RHS and SHS Beam-Columns. PhD Thesis, School of Civil and Mining Engineering, The University of Sydney, Sydney, Australia 1996.
152. Trahair N.S., Bradford M.A., Nethercot D.A. The Behaviour and Design of Steel Structures to BS 5950 2001, British, Spon Press, Sydney, Australia. Third Edition.
153. Trahair N.S. Flexural-Torsional Buckling of Structures 1993, E. & F.N. Spon, London, UK.
154. ASI Design Capacity Tables for Structural Steel - Volume 2: Hollow Sections 1999, Australian Steel Institute, London, UK.
155. BSI Structural use of Steelwork in Building 1998, BS 5950, Part 5, British Standard Institution, Sydney, Australia.
156. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, London, UK.
157. CSA-S136 Cold-Formed Steel Structural Members, CSA-S136-01 2001, Canadian Standards Association, London, UK.
158. Hancock G.J., Sully R.M., Zhao X.L. Hollow Flange Beams and RHS Sections under Combined Bending and Bearing. Tubular Structures VI 1994, 47-54. Balkema, Toronto, Ontario, Canada. P. Grundy, A. Holgate, B. Wong (Eds.).
159. Hetrakul N., Yu W.W. Structural Behaviour of Beam Webs Subjected to Web Crippling and a Combination of Web Crippling and Bending. Final Report 1978, University of Missouri-Rolla, Rotterdam, The Netherlands.
160. Hetrakul N., Yu W.W. Cold-Formed Steel I-Beams Subjected to Combined Bending and Web Crippling. Thin-Walled Structures - Recent Technical Advances and Trends in Design, Research and Construction 1979, 413-426. Granada Publishing, Missouri, USA. J. Rhodes, A.C. Walker (Eds.).
161. Kato B., Nishiyama I. The Static Strength of R.R.-Joints with Large b/B ratio. CIDECT Report 5Y 1979, Department of Architecture, Faculty of Engineering, University of Tokyo, London, UK.
162. Kato B., Nishiyama I. T-Joints Made of Rectangular Tubes. Proceedings, 5th International Specialty Conference on Cold-Formed Steel Structures 1980, 663-679.
163. NAS North American Specification for the Design of Cold-Formed Steel Structural Members 2002, American Iron and Steel Institute, Tokyo, Japan.
164. Packer J.A. Web Crippling of Rectangular Hollow Sections. Journal of Structural Engineering, ASCE 1984, 110(10):2357-2373.
165. Packer J.A., Wardenier J., Kurobane Y., Dutta D., Yeomans N. Design Guide for Rectangular Hollow Section (RHS) Joints under Predominantly Static Loading 1992, TüV-Verlag, Washington, D.C, USA.
166. Ratcliff G.D. Interaction of Concentrated Loads and Buckling in C-Shaped Beams. Proceedings, Third International Specialty Conference on Cold-Formed Steel Structures 1975, 337-356. University of Missouri-Rolla, Köln, Germany.
167. Roberts T.M. Slender Plate Girders Subjected to Edge Loading. Proceedings, Institution of Civil Engineers 1981, Volume 71:805-809. Part 2, September.
168. Roberts T.M. Patch Loading on Plate Girders. Plated Structures: Stability and Strength 1983, 77-102. Chapter 3, Applied Science Publishers, Missouri, USA. R. Narayanan (Ed.).
169. Rockey K.C., El-Gaaly M.A., Bagchi D.K. Failure of Thin-Walled Members under Patch Loading. Journal of the Structural Division, ASCE 1972, 98(ST12):2739-2752.
170. SCI Steelwork Design Guide to BS 5950-1:2000, Volume 1, Section Properties and Members Capacities 2002, The Steel Construction Institute, London, UK.
171. Standards Australia Cold-Formed Steel Structures, Australian Standard AS/NZS 4600 1996, Standards Australia, UK.
172. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Sydney, Australia.
173. Trahair N.S., Bradford M.A., Nethercot D.A. The Behaviour and Design of Steel Structures to BS 5950 2001, British, Spon Press, Sydney, Australia. Third Edition.
174. Wing B.A., Schuster R.M. Web Crippling of Multi-Web Deck Sections Subjected to Interior One Flange Loading. Proceedings, 8th International Specialty Conference on Cold-Formed Steel Structures 1986, 371-402.
175. Zhang Z.L., Shen Z.Y., Chen X.C. Nonlinear FEM Analysis and Experimental Study of Ultimate Capacity of Welded RHS Joints. Proceedings, 3rd International Symposium on Tubular Structures 1989, 1-9. Session P4.03-1.
176. Zhao X.L. The Behaviour of Cold-Formed Rectangular Hollow Section Beams under Combined Actions. PhD Thesis, The University of Sydney, Sydney, Australia 1992.
177. Zhao X.L. Deformation Limit and Ultimate Strength of Welded T-joints in Cold-Formed RHS Sections. Journal of Constructional Steel Research 2000, 53(2):149-165.
178. Zhao X.L., Hancock G.J. T-Joints in Rectangular Hollow Sections Subject to Combined Actions. Journal of Structural Engineering, ASCE 1991, 117(8):2258-2277.
179. Zhao X.L., Hancock G.J. Plastic Mechanism Analysis of T-Joints in RHS Under Concentrated Force. Journal of Singapore Structural Steel Society 1991, 2(1):31-44.
180. Zhao X.L., Hancock G.J. Square and Rectangular Hollow Sections Subject to Combined Actions. Journal Structural Engineering, ASCE 1992, 118(3):648-668.
181. Zhao X.L., Hancock G.J. Design Formulae for Web Crippling of Rectangular Hollow Sections. Proceedings, 3rd Pacific Structural Steel Conference 1992, 97-104.
182. Zhao X.L., Hancock G.J. Square and Rectangular Hollow Sections under Transverse End Bearing Force. Journal of Structural Engineering, ASCE 1995, 121(11):1565-1573.
183. Zhao X.L., Hancock G.J., Sully R.M. Design of Tubular Members and Connections using Amendment No.3 to AS 4100. Steel Construction, Journal of the Australian Institute of Steel Construction 1996, 30(4):2-15.
184. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings 1999, American Institute of Steel Construction, London, UK.
185. AISI Specification for the Design of Cold-Formed Steel Structural Members 1986, American Iron and Steel Institute, Chicago, Illinois, USA.
186. AWS Structural Welding Code - Sheet Steel, AWS D1.3-98 1998, American Welding Society, Washington D.C, USA. 4th Edition.
187. AWS Structural Welding Code - Steel, AWS D1.1/D1.1M:2002 2002, American Welding Society, Miami, Florida, USA. 18th Edition.
188. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, Miami, Florida, USA.
189. Butler L.J., Kulak G.L. Strength of Fillet Welds as a Function of Direction of Load. Welding Journal, Welding Research Supplement 1971, 50(5):231-234.
190. Butler L.J., Pal S., Kulak G.L. Eccentrically Loaded Welded Connections. Journal of the Structural Division, ASCE 1972, 98(ST5):989-1005.
191. th Quarter, American Institute of Steel Construction, London, UK.
192. Clarke A.H. The Strength of Fillet Welded Connections. Master Thesis 1970, Civil Engineering Department, Imperial College, University of London.
193. Clarke P.J. Basis of Design for Fillet Welded Joints under Static Loading. Proceedings, Conference on Improving Welding Product Design, The Welding Institute 1971, 85-181.
194. CSA-S16 Steel Structures for Buildings (Limit State Design), CSA-S16-01 2001, Canadian Standards Association, London, UK.
195. CSA-S136 Cold-Formed Steel Structural Members, CSA-S136-01 2001, Canadian Standards Association, Toronto, Ontario, Canada.
196. Driver R.G., Grondin G.Y., Kulak G.L. A Unified Approach to Design for Block Shear. Proceedings, Fifth ECCS/AISC Workshop on Steel Connections 2004, Session 6, Paper No. 4, Amsterdam, The Netherlands.
197. EC3 Eurocode 3: Design of Steel Structures - Part 1.1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardization, Toronto, Ontario, Canada.
198. EC3 Eurocode 3: Design of Steel Structures - Part 1.3: Supplementary Rules for Cold-Formed Members and Sheeting, EN 1993-1-3: 2004, March 2004 2004, European Committee for Standardization, Brussels, Belgium.
199. Funderburk R. Selecting Filler Metals: Matching Strength Criteria 2001, Welding Technology Institute of Australia, Brussels, Belgium.
200. th ECCS/AISC Workshop on Steel Connections 2004, Session 1, Paper No. 3, Amsterdam, The Netherlands.
201. Higgins T.R., Preece F.R. Proposed Working Stress for Fillet Welds in Building Construction. Engineering Journal 1969, 6:16-20. (1), American Institute of Steel Construction, Sydney, Australia.
202. Iwankiw N.R. Rational Basis for Increased Fillet Weld Strength. Engineering Journal 1997, 68-70. Second Quarter, American Institute of Steel Construction.
203. Kamtekar A.G. The Strength of Inclined Fillet Welds. Journal of Constructional Steel Research 1987, 7(1):43-54.
204. Kato B., Morita K. Strength of Transverse Fillet Welded Joints. Welding Journal, Welding Research Supplement 1974, 53(2):49s-64s.
205. Korol R.M. Shear Lag in Slotted HSS Tension Members. Canadian Journal of Civil Engineering 1996, Vol. 23:1350-1354.
206. st International Conference on Steel and Composite Structures 2001, 261-266.
207. Lesik D.F., Kennedy D.J.L. Ultimate Strength of Fillet Welded Connections Loaded in Plane. Canadian Journal of Civil Engineering 1990, Vol. 17:55-67.
208. Ligtenberg F.K. International Test Series Final Report 1968, IIW Doc. XV-242-1968, Stevin Laboratory, Delft University of Technology.
209. Ling T.W., Zhao X.L., Al-Mahaidi R., Packer J.A. Connection Design of Very High Strength Steel Tubes Longitudinally Welded to Steel Plates. Developments in Mechanics of Structures and Materials 2004, 1135-1140. Balkema, Delft, The Netherlands. A.J. Deeks, H. Hao (Eds.).
210. Marsh C. Strength of Aluminum Fillet Welds. Welding Journal, Welding Research Supplement 1985, 64(12):335s-338s.
211. Marsh C. Strength of Aluminum T-joint Fillet Welds. Welding Journal, Welding Research Supplement 1988, 67(8):171s-176s.
212. Mendelson A. Plasticity: Theory and Application 1968, The Macmillan Co., London.
213. Miazga G.S., Kennedy D.J.L. Behaviour of Fillet Welds as a Function of the Angle of Loading. Canadian Journal of Civil Engineering 1989, Vol. 16:583-599.
214. NAS North American Specification for the Design of Cold-Formed Steel Structural Members 2004, American Iron and Steel Institute, New York, USA.
215. Neis V.V. New Constitutive Law for Equal Leg Fillet Welds. Journal of Structural Engineering, ASCE 1985, 111(8):1747-1759.
216. Packer J.A., Henderson J.E. Hollow Structural Section Connections and Trusses 1997, Canadian Institute of Steel Construction, Washington D.C, USA.
217. Peköz T., McGuire W. Sheet Steel Welding. Journal of the Structural Division, ASCE 1981, 107(ST8):1657-1673.
218. Pham L., Bennetts I.D. Reliability of Fillet Weld Design. Civil Engineering Transaction 1983, E26:119-124. (2), Institution of Engineers, Ontario, Canada.
219. Sanaei E., Kamtekar A.G. Experimental on Some Arbitrarily Loaded Filet Welds. Welding Journal, Welding Research Supplement 1988, 67(8):103s-109s.
220. Soetens F. Welded Connections in Aluminum Alloy Structures. Heron 1987, 32(1):1-48.
221. Standards Australia Cold-Formed Steel Structures, Australian Standard AS 1538 1988, Standards Australia, Australia.
222. Standards Australia Steel Structures, Australian Standard AS 4100 1990, Standards Australia, Sydney, Australia.
223. Standards Australia Cored Electrodes for Arc-Welding - Ferritic Steel Electrodes, Australian Standard AS 2203.1 1990, Standards Australia, Sydney, Australia.
224. Standards Australia Structural Steel Welding - Part 1: Welding of steel structures, Australian Standard AS 1554.1 1991, Standards Australia, Sydney, Australia.
225. Standards Australia Covered Electrodes for Welding - Low Carbon Steel Electrodes for Manual Metal-Arc Welding of Carbon Steels and Carbon-Manganese Steels, Australian Standard AS/NZS 1553.1 1995, Standards Australia, Sydney, Australia.
226. Standards Australia Cold-Formed Steel Structures, Australian Standard AS/NZS 4600 1996, Standards Australia, Sydney, Australia.
227. Standards Australia Welding - Electrodes - Gas Metal Arc - Ferritic Steel Electrodes Australian Standard AS/NZS 2717.1 1996, Standards Australia, Sydney, Australia.
228. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Sydney, Australia.
229. Standards Australia Structural Steel Welding - Part 1: Welding of steel structures, Australian Standard AS/NZS 1554.1 2000, Standards Australia, Sydney, Australia.
230. Standards Australia Methods for Destructive Testing of Welds in Metal - Macro metallographic test for cross-section examination, Australian Standard AS 2205.5.1 2003, Standards Australia, Sydney, Australia.
231. Standards Australia Electrodes and Fluxes for Submerged-Arc Welding - Carbon Steels and Carbon-Manganese Steels, Australian Standard AS 1858.1 2003, Standards Australia, Sydney, Australia.
232. th International Specialty Conference on Cold-Formed Steel Structures 1980, 591-636.
233. Swannell P. Rational Design of Fillet Weld Groups. Journal of the Structural Division, ASCE 1981, 107(ST5):789-802.
234. Swannell P., Skewes I.C. The Design of Welded Brackets Loaded in-plane: Elastic and Ultimate Load Techniques. AWRA Report P6-8-77 1979, Vol.7:28-59. Australia Welding Research Association, Sydney, Australia.
235. Wilkinson T., Petrovski T., Bechara E., Rubal M. Experimental Investigation of Slot Lengths In RHS Bracing Members. Advances in Steel Structures 2002, 205-212. Elsevier Science Ltd. S.L. Chan, J.G. Teng, K.F. Chung (Eds.).
236. Willibald S., Packer J.A., Martinez Saucedo G., Puthli R.S. Shear Lag in Slotted Gusset Plate Connections to Tubes. Proceedings, Fifth ECCS/AISC Workshop on Steel Connections 2004, Session 8, Paper No. 3, Amsterdam, The Netherlands.
237. Zhao X.L., Hancock G.J. Tests and Design of Butt Welds and Transverse Fillet Welds in Thin Cold-Formed RHS Members. Research Report, No. R681 1993, School of Civil and Mining Engineering, University of Sydney, Oxford.
238. Zhao X.L., Hancock G.J. Tests and Design of Longitudinal Fillet Welds in Thin Cold-Formed RHS Members. Research Report, No. R682 1993, School of Civil and Mining Engineering, University of Sydney, Sydney, Australia.
239. Zhao X.L., Hancock G.J. Tests and Design of Butt Welds and Fillet Welds in Cold-Formed DuraGal RHS Members. Research Report, No. R702 1994, School of Civil and Mining Engineering, University of Sydney, Sydney, Australia.
240. Zhao X.L., Hancock G.J. Butt Welds and Transverse Fillet Welds in Thin Cold-Formed RHS Members. Journal of Structural Engineering, ASCE 1995, 121(11):1674-1682.
241. Zhao X.L., Hancock G.J. Longitudinal Fillet Welds in Thin Cold-Formed RHS Member. Journal of Structural Engineering, ASCE 1995, 121(11):1683-1690.
242. Zhao X.L., Hancock G.J. Welded Connections in Thin Cold-Formed Rectangular Hollow Sections. Connections in Steel Structures III 1996, 89-98. Pergamon, Sydney, Australia. R. Bjorhovde, A. Colson, R. Zandonini (Eds.).
243. Zhao X.L., Hancock G.J., Sully R.M. Design of Tubular Members and Connections Using Amendment No.3 to AS 4100. Steel Construction, Australian Institute of Steel Construction 1996, 30(4):2-15.
244. Zhao X.L., Hancock G.J. Recent Research on Cold-Formed Tubular Structures. Journal of Constructional Steel Research 1998, 46(1-3). paper 229, CD-Rom.
245. Zhao X.L., Al-Mahaidi R., Kiew K.P. Longitudinal Fillet Welds in Thin-Walled C450 RHS Members. Journal of Structural Engineering, ASCE 1999, 125(8):821-828.
246. Zhao X.L., Jiao H. Recent Developments in High Strength Thin-Walled Steel Tubes. Thin-Walled Structures - Recent Advances and Future Trends in Thin-Walled Structures Technology 2004, 1-19. Canopus Publishing Limited, Oxford. J. Loughlan (Ed.).
247. BSI Fatigue design and assessment of steel structures 1993, BS 7608, British Standard Institution, Bath, UK.
248. BSI Steel, concrete and composite bridges 1988, BS 5400, British Standard Institution, London, UK.
249. BSI Structural use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, London, UK.
250. EC3 Eurocode 3: Design of Steel Structures - Part 1.9: Fatigue, prEN 1993-1-9: 2003, November 2003 2003, European Committee for Standardization, London, UK.
251. EC1 Eurocode 1: Actions on Structures - Part 2: Traffic Loads on Bridges, prEN 1991-2, 10 January 2002 2002, European Committee for Standardization, Brussels, Belgium.
252. Fisher J., Frank K.H., Hirt M.A., McNamee B.M. Effect of Weldment on Fatigue Strength of Steel Beam. NCHRP Report No. 102 1970, Lehigh University, Brussels, Belgium.
253. Grundy P. Fatigue Design of Steel Structures. Steel Construction, Journal of the Australian Steel Institute 2004, 38(1):1-8.
254. Gurney T.R. Fatigue of Welded Structures 1979, Cambridge University Press, Bethlehem, Pennsylvania, USA. 2nd Edition.
255. Kurobane Y. Recent Development in the Fatigue Design Rules in Japan. Proceedings, International Symposium on the Occasion of the Retirement of Prof. J. de Back 1989, 173-187.
256. Maddox S.J. Fatigue Strength of Welded Structures 1991, Abington Publishing, Cambridge, UK.
257. Mang F., Bucak ö Fatigue Behaviour of Welded Joints in Trusses of Steel Hollow Sections. Proceedings, IABSE Colloquium on Fatigue of Steel and Concrete Structures 1982, 735-744.
258. Marshall P.W. Design of Welded Tubular Connections - Basis and Use of AWS Code Provisions 1992, Elsevier Science Publishers, Cambridge, UK.
259. Mashiri F.R., Zhao X.L., Grundy P. Fatigue Tests and Design of Welded T Connections in Thin Cold-Formed Square Hollow Sections under In-Plane Bending. Journal of Structural Engineering, ASCE 2002, 128(11):1413-1422.
260. Mashiri F.R., Zhao X.L., Grundy P. Fatigue of Cold-Formed CHS Joints (t < 4 mm). CIDECT Report No. 7U-9/04 2004, Department of Civil Engineering, Monash University, Amsterdam, The Netherlands.
261. Niemi E. Designer's Guide for Hot Spot Fatigue Analysis. IIW Doc. XIII-WG3-06-99 1999, IIW Annual Assembly, Melbourne, Australia.
262. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Lisbon, Portugal.
263. Standards Australia Supplement to AS 4100-1998 1999, Standards Australia, Sydney, Australia.
264. Standards Australia Cranes, Hoists and Winches 2002, Australian Standard AS1418, Standards Australia, Sydney, Australia.
265. nd Australasian Congress on Applied Mechanics 1999, CD-Rom, Paper R-064.
266. Zhao X.L., Herion S., Packer J.A., Puthli R., Sedlacek G., Wardenier J., Weynand K., van Wingerde A., Yeomans N. Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading 2000, TüV-Verlag, Sydney, Australia.
267. AIJ Recommendations for Design and Construction of Concrete-Filled Steel Tubular Structures 1997, Architectural Institute of Japan, Köln, Germany.
268. AISC Load and Resistance Factor Design Specification for Structural Steel Buildings 1999, American Institute of Steel Construction, Tokyo, Japan.
269. AISC Seismic Provisions for Structural Steel Buildings 2002, American Institute of Steel Construction, Chicago, Illinois, USA.
270. Ala-Outinen T., Myllymäki J. The Local Buckling of RHS Members at Elevated Temperatures, VTT Tiedotteita - Meddelanden - Research Notes 1672 1995, VTT Building Technology, Chicago, USA.
271. Berge S., Webster S.E. The Size Effect on the Fatigue Behaviour of Welded Joints. Proceedings, Steel in Marine Structures, (SIM'87) 1987, 179-203.
272. Bergmann R., Matsui C., Meinsma C., Dutta D. Design Guide for Concrete Filled Hollow Section Columns under Static and Seismic Loading 1995, TüV-Verlag, Finland.
273. Binh D.V., Al-Mahaidi R., Zhao X.L. Finite Element Analysis of Fabricated and Triangular Section Stub Columns Utilizing Very High Strength Steel Tubes. Advances in Structural Engineering - An International Journal 2004, 7(5):447-460.
274. Birkemoe P.C., Packer J.A. Ultimate Strength Design of Bolted Tubular Tension Connections. Proceedings, Steel Structures - Recent Research Advances and their Applications to Design 1986, 153-168.
275. BSI Structural Use of Steelwork in Building 2000, BS 5950, Part 1, British Standard Institution, Köln, Germany.
276. Cao J.J., Packer J.A., Du S. Finite Element Modeling of Bolted Flange Connections. Structural Failure and Plasticity 2000, 473-478. Elsevier, London, UK. X.L. Zhao, R.H. Grzebieta (Eds.).
277. CASE PRFSA: Plane Rigid Frame Structural Analysis. User Manual 1997, Centre for Advanced Structural Engineering, The University of Sydney, Oxford.
278. Cheng J.J.R., Kulak G.L., Khoo H. Strength of Slotted Tubular Tension Members. Canadian Journal of Civil Engineering 1998, 25(6):982-991.
279. th Quarter, American Institute of Steel Construction, Sydney, Australia.
280. Clarke M.J., Zablotskii S.V. NIFA: Non-linear Inelastic Frame Analysis. User Manual 1995, Centre for Advanced Structural Engineering, The University of Sydney.
281. Davies G., Owen J.S., Kelly R. The Effect of Purlin Loads on the Capacity of Overlapped Bird-Beak K-joints. Tubular Structures IX 2001, 229-238. Swets & Zeitlinger, Sydney, Australia. R.S. Puthli, S. Herion (Eds.).
282. DEn Background to New Fatigue Design Guidance for Steel Joints in Offshore Structures. Internal Report 1993, Department of Energy, Lisse.
283. Dijkstra O.D., van Foeken R.J., Romeijn A., Karamanos S.A., van Wingerde A.M., Puthli R.S., Herion H., Wardenier J. Fatigue Design Guide for Circular and Rectangular Hollow Section Multiplanar Joints. TNO-Report 97-CON-R1331, Delft, The Netherlands 1996.
284. Dimitrakis S.D., Lawrence F.V., Mohr W.C. S-N Curves for Welded Tubular Joints. Proceedings, Fourteenth International Offshore Mechanics and Arctic Engineering Symposium (OMAE'95) 1995, Volume II:209-222.
285. EC3 Eurocode 3: Design of Steel Structures - Part 1.1: General Rules and Rules for Buildings, prEN 1993-1-1:2003, November 2003 2003, European Committee for Standardization, London, UK.
286. EC 4 Eurocode 4 Part 1.1, Design of Composite Steel and Concrete Structures: General rules and rules for buildings, prEN 1994-1-1:2001, April 2001 2001, European Committee for Standardization, Brussels, Belgium.
287. EC8 Eorocode 8 Part 1.1, Design of Structures for Earthquake Resistance: General Rules, seismic actions and rules for buildings 2003, European Committee for Standardization, Brussels, Belgium.
288. Efthymiou M. Development of SCF Formulae and Generalized Functions for use in Fatigue Analysis. Proceedings, Offshore Tubular Joints Conference (OTJ'88) on Recent Developments in Tubular Joints Technology 1988.
289. Efthymiou M., Durkin S. Stress Concentration in T/Y and Gap/Overlap K-joints. Behaviour of Offshore Structures 1985, 429-440. Elsevier Science Publishers, Brussels, Belgium.
290. Elchalakani M., Zhao X.L., Grzebieta R.H. Concrete Filled Circular Steel Tubes subjected to Pure Bending. Journal of Constructional Steel Research 2001, 57(11):1141-1168.
291. Elchalakani M., Zhao X.L., Grzebieta R.H. Tests on Concrete Filled Double Skin (CHS outer and SHS inner) Composite Short Columns under Axial Compression. Thin-Walled Structures 2002, 40(5):415-441.
292. Elchalakani M. Cyclic Bending Behaviour of Hollow and Concrete-Filled Cold-formed Circular Steel Members. PhD Thesis, Monash University, Melbourne, Australia 2003.
293. Elchalakani M., Zhao X.L., Grzebieta R.H. Tests of Cold-Formed Circular Tubular Braces under Cyclic Axial Loading. Journal of Structural Engineering, ASCE 2003, 129(4):507-514.
294. Elchalakani M., Zhao X.L., Grzebieta R.H. Cyclic Bending Tests to Determine Fully Ductile Section Slenderness Limits for Cold-Formed CHS. Journal of Structural Engineering, ASCE 2004, 130(7):1001-1010.
295. Elchalakani M., Zhao X.L., Grzebieta R.H. Concrete-Filled Steel Tubes Subjected to Constant Amplitude Cyclic Pure Bending. Engineering Structures 2004, 26(14):2125-2135.
296. Gurney T.R. Fatigue of Welded Structures 1979, Cambridge, UK, Cambridge University Press, Amsterdam, The Netherlands. 2nd Edition.
297. Haagensen P.J. Improvement Techniques. Proceedings, International Symposium on the Occasion of the Retirement of Prof. J de Back 1989, 77-89.
298. Han L.H., Yao G.H., Zhao X.L. Concrete-Filled Double Skin (SHS outer and CHS inner) Steel Tubular Beam-Columns. Thin-Walled Structures 2004, 42(9):1329-1355.
299. Han L.H., Zhao X.L., Yang Y.F., Feng J.B. Experimental Study and Calculation of Fire Resistance of Concrete-Filled Hollow Section Columns. Journal of Structural Engineering, ASCE 2003, 129(3):345-356.
300. Igarashi S., Wakiyama K., Inoue K., Matsumoto T., Murase Y. Limit Design of High Strength Bolted Tube Flange Joint. Journal of Structural and Construction Engineering 1985, Transactions of AIJ, Osaka University.
301. IIW Recommended Fatigue Design Procedure for Hollow Section Joints. Part 1 - hot spot stress method for nodal joints. IIW Doc. XV-582-85 and IIW Doc. XIII-1158-85 1985, IIW Assembly, Japan.
302. IIW Fatigue Design Procedure for Welded Hollow Section Joints, Part 1: Recommendations and Part 2: Commentary 1999, Abington Publishing, Strasbourg, France. X.L. Zhao, J.A. Packer (Eds.).
303. Jiao H., Zhao X.L. Material Ductility of Very High Strength (VHS) Circular Steel Tubes in Tension. Thin-Walled Structures 2001, 39(11):887-906.
304. Jiao H., Zhao X.L. Imperfection, Residual Stress and Yield Slenderness Limit of Very High Strength (VHS) Circular Steel Tubes. Journal of Constructional Steel Research 2003, 59(2):233-249.
305. Jiao H., Zhao X.L. Tension Capacity of Very High Strength (VHS) Circular Steel Tubes after Welding. Advances in Structural Engineering - An International Journal 2004, 7(4):85-96.
306. Jiao H., Zhao X.L. Section Slenderness Limits of Very High Strength Circular Steel Tubes in Bending. Thin-Walled Structures 2004, 42(9):1257-1271.
307. Jiao H., Zhao X.L. CFRP Strengthened Butt-Welded Very High Strength (VHS) Circular Steel Tubes. Thin-Walled Structures 2004, 42(7):963-978.
308. Karamanos S.A., Romeijn A., Wardenier J. Stress Concentrations and Joint Flexibility Effects in Multiplanar Welded Tubular Connections for Fatigue Design, Stevin Report 6-98-05. CIDECT Report 7R-17/98 1997, Delft University of Technology, Cambridge, UK.
309. Kato B., Hirose A. Bolted Tension Flanges Joining Circular Hollow Section Members. CIDECT Report 8C-84-24-E 1984, University of Tokyo, Delft, The Netherlands.
310. Kato B., Mukai A. Bolted Tension Flanges Joining Square Hollow Section Members. CIDECT Report 8B-82/3-E 1982, University of Tokyo, Tokyo, Japan.
311. Keizer R., Romeijn A., Wardenier J., Glijnis P.C. The Fatigue Behaviour of Diamond Bird Beak T-joints. Tubular Structures X 2003, 303-309. Balkema, Tokyo, Japan. M.A. Jaurrieta, A. Alonso, J.A. Chica (Eds.).
312. Korol R.M. Shear Lag in Slotted HSS Tension Members. Canadian Journal of Civil Engineering 1996, Vol. 23:1350-1354.
313. Kosteski N., Packer J.A., Puthli R.S. Notch Toughness of Internationally Produced Hollow Sections. Journal of Structural Engineering, ASCE 2005, 131(2):279-286.
314. Ling T.W., Zhao X.L., Al-Mahaidi R., Packer J.A. Connection Design of Very High Strength Steel Tubes Longitudinally Welded to Steel Plates. Developments in Mechanics of Structures and Materials 2004, 1135-1140. Balkema, Rotterdam. A.J. Deeks, H. Hao (Eds.).
315. Mang F. Investigation of Standard Bolted Flange Connections for Circular and Rectangular Hollow Sections. CIDECT Report 8A-81/7-E 1980, University of Karlsruhe, London.
316. nd International Conference on Welding of Tubular Structures 1984, 1-54.
317. Marshall P.W. Design of Welded Tubular Connections - Basis and Use of AWS Code Provisions 1992, Elsevier Science Publishers, Karlsruhe, Germany.
318. Mashiri F.R., Zhao X.L., Grundy P. Effects of Weld Profile and Undercut on Fatigue Crack Propagation Life of Thin-Walled Cruciform Joint. Thin-Walled Structures 2001, 39(3):261-285.
319. Mashiri F.R., Zhao X.L., Grundy P. Fatigue Tests and Design of Thin Cold-Formed SHS-to-SHS T-Connections under In-Plane Bending. Journal of Structural Engineering, ASCE 2002, 128(1):22-31.
320. Mashiri F.R., Zhao X.L., Grundy P. Fatigue Tests and Design of Welded T Connections in Thin Cold-Formed Square Hollow Sections under In-Plane Bending. Journal of Structural Engineering, ASCE 2002, 128(11):1413-1422.
321. Mashiri F.R., Zhao X.L., Grundy P. Stress Concentration Factors and Fatigue Failure of Welded T-connections in Thin Cold-Formed Circular Hollow Sections under In-plane Bending. International Journal of Structural Stability and Dynamics 2004, 4(3):403-422.
322. Matsui C., Mitani I., Kawano A., Tsuda K. AIJ Design Method for Concrete Filled Steel Tubular Structures. Proceedings, ASCCS Seminar on Concrete Filled Steel Tubes - A Comparison of International Codes and Practice 1997, 93-116.
323. NZS 3404 Steel Structures Standard 1992, Standards Association of New Zealand, Amsterdam, The Netherlands.
324. Owen J.S., Davies G., Kelly R. A Comparison of the Behaviour of RHS Bird Beak T-joints with Normal RHS and CHS Systems. Tubular Structures VII 1996, 173-180. Balkema. J. Farkas, H. Jármai (Eds.).
325. Packer J.A., Bruno L., Birkemoe P.C. Limit Analysis of Bolted RHS Flange Plate Joints. Journal of Structural Engineering, ASCE 1989, 115(9):2226-2242.
326. Packer J.A., Wardenier J., Kurobane Y., Dutta D., Yeomans N. Design Guide for Rectangular Hollow Section (RHS) Joints under Predominantly Static Loading 1992, TüV-Verlag, Rotterdam, The Netherlands.
327. Packer J.A., Henderson J.E. Hollow Structural Section Connections and Trusses 1997, Canadian Institute of Steel Construction, Köln, Germany.
328. Packer J.A., Du S., Willibald S. Bolted Flange-Plate Connections for RHS Tension Members. CIDECT Report 8D-12/99 1999, April, University of Toronto, Ontario, Canada.
329. Patterson N.L., Zhao X.L., Wong B., Ghojel J., Grundy P. Elevated Temperature Testing of Composite Columns. Advances in Steel Structures 1999, 1047-1054. Elsevier, Toronto, Canada. S.L. Chan, J.G. Teng (Eds.).
330. Puthli R.S., de Koning C.H.M., van Wingerde A.M., Wardenier J., Dutta D. Fatigue Strength of Welded Unstiffened RHS Joints in Lattice Structures and Vierendeel Girders, Final Report Part III: Evaluation for Design Rules. TNO-IBBC Report No. BI-89-097/63.5.3800 1989, Stevin Report No. 25-6-89-36/A1, June, Delft, The Netherlands.
331. Puthli R.S., Herion S. Stress Concentration and Secondary Moment Distribution in RHS Joints for Fatigue Design. Background Document for fatigue design guide on RHS 1996, University of Karlsruhe, Oxford.
332. Puthli R.S., Herion S., Boellinghaus T., Florian N.W. Welding in Cold-Formed Areas of Rectangular Hollow Sections. CIDECT Report 1A-5/04 2004, University of Karlsruhe, Karlsruhe, Germany.
333. Ranzi G., Kneen P. Design of Pinned Columns Base Plates. Steel Construction, Journal of the Australian Steel Institute 2002, 36(2):1-53.
334. Rhodes J., Zhao X.L., Binh D.V., Al-Mahaidi R. Rational Design Analysis of Stub Columns Fabricated using Very High Strength Circular Steel Tubes. Thin-Walled Structures 2005, 43(3):445-460.
335. rd International Offshore and Polar Engineering Conference, Singapore 1993, Vol. IV:27-36.
336. Romeijn A. Stress and Strain Concentration Factors of Welded Multiplanar Tubular Joints. PhD Thesis, Delft University of Technology, Delft, The Netherlands 1994.
337. Standards Australia Steel Structures, Australian Standard AS 4100 1998, Standards Australia, Karlsruhe, Germany.
338. Tao Z., Han L.H., Zhao X.L. Behaviour of Concrete-Filled Double Skin (CHS inner and CHS outer) Steel Tubular Stub Columns and Beam-Columns. Journal of Constructional Steel Research 2004, 60(8):1109-1256.
339. Teh L.H., Rasmussen K.J.R. Strength of Butt Welded Connections between Equal-Width Rectangular Hollow Sections. Research Report R817 2002, The University of Sydney, Sydney, Australia.
340. Teh L.H., Hancock G.J. Improving the Ductility of Knee Joints between Rectangular Hollow Sections. Journal of Structural Engineering, ASCE 2004, 130(11):1790-1798.
341. Thorpe T.W., Sharp J.V. The Fatigue Performance of Tubular Joints in Air and Sea Water. MaTSU Report 1989, Harwell Laboratory, Sydney, Australia.
342. Uy B. Strength of Concrete Filled Steel Box Columns Incorporating Local Buckling. Journal of Structural Engineering, ASCE 2000, 126(3):341-352.
343. van Delft D.R.V. A Two Dimensional Analysis of the Stresses at the Vicinity of the Weld Toes of Tubular Structures. Stevin Report 6-18-8 1981, Delft University of Technology, Oxfordshire, UK.
344. van Delft D.R.V., Noordhoek C., de Back J. Evaluation of the European Fatigue Test Data on Large-Sized Welded Tubular Joints for Offshore Structures. Proceedings, Offshore Technology Conference 1985, paper OTC 4999.
345. van Wingerde A.M. The Fatigue Behaviour of T and X Joints Made of Square Hollow Sections. Heron, The Netherlands 1992, 37(2):1-180.
346. van Wingerde A.M., Packer J.A., Wardenier J., Dutta D. The Fatigue Behaviour of K-joints Made of Square Hollow Sections. CIDECT Report 7P-19/96 1996, University of Toronto, Delft, The Netherlands.
347. van Wingerde A.M., Packer J.A., Wardenier J., Dutta D. Simplified Design Graphs for the Fatigue Design of Multiplanar K-joints with Gap. CIDECT Report 7R-01/97 1997, January, University of Toronto, Toronto, Canada.
348. van Wingerde A.M., Packer J.A., Wardenier J. IIW Fatigue Rules for Tubular Joints. Proceedings, IIW International Conference on Performance of Dynamically Loaded Welded Structures 1997, 98-107.
349. van Wingerde A.M., van Delft D.R.V., Wardenier J., Packer J.A. Scale Effects on the Fatigue Behaviour of Tubular Structures. Proceedings, IIW International Conference on Performance of Dynamically Loaded Welded Structures 1997, 123-135.
350. van Wingerde A.M., Wardenier J., Packer J.A. Commentary on the Draft Specification for Fatigue Design of Hollow Section Joints. Tubular Structures XIII 1998, 117-127. Balkema, Toronto, Canada. S. Choo, G.J. van der Vegte (Eds.).
351. van Wingerde A.M., Wardenier J., Packer J.A. Simplified Design Graphs for the Fatigue Design of Multiplanar K-joints with Gap. CIDECT Final Report No. 7R-23/98 1998, September, Delft University of Technology, Rotterdam, The Netherlands.
352. Wardenier J. Hollow Section Joints 1982, Delft University Press, Delft, The Netherlands.
353. Wardenier J., Kurobane Y., Packer J.A., Dutta D., Yeomans N. Design Guide for Circular Hollow Section (CHS) Joints under Predominantly Static Loading 1991, TüV-Verlag, Delft, The Netherlands.
354. th International Colloquium on Stability and Ductility of Steel Structures, Nagoya, Japan 1997, Vol. 1:847-854.
355. Wheeler A.T., Clarke M.J., Hancock G.J. Tests of Bolted End Moment End Plate Connections in Tubular Members. Proceedings, Fourteenth Australasian Conference on the Mechanics of Structures and Materials, Hobart, Tasmania 1995, 331-336. University of Tasmania, Köln, Germany.
356. Wheeler A.T., Clarke M.J., Hancock G.J., Murray T.M. Design Model for Bolted Moment End Plate Connections using Rectangular Hollow Sections. Research Report R745 1997, Department of Civil Engineering, The University of Sydney, Tasmania, Australia.
357. Wheeler A.T., Clarke M.J., Hancock G.J., Murray T.M. Design Model for Bolted Moment End Plate Connections Joining Rectangular Hollow Sections. Journal of Structural Engineering, ASCE 1998, 124(2):164-173.
358. Wheeler A.T., Clarke M.J., Hancock G.J FE Modeling of Four Bolt Tubular Moment End-Plate Connections. Journal of Structural Engineering, ASCE 2000, 126(7):816-822.
359. Wheeler A.T., Clarke M.J., Hancock G.J. Design Model for Bolted Moment End Plate Connections joining Rectangular Hollow Sections using Eight Bolts. Research Report R827 2003, Department of Civil Engineering, The University of Sydney, Sydney, Australia.
360. Wilkinson T.J. The Plastic Behaviour of Cold-Formed Rectangular Hollow Sections. PhD Thesis, The University of Sydney, Sydney, Australia 1999.
361. Wilkinson T.J., Hancock G.J. Comparison of Analyses with Tests of Cold-Formed RHS Portal Frames. Mechanics of Structures and Materials 1999, 245-250. Balkema, Sydney, Australia. M.A. Bradford, R.Q. Bridge, S.J. Foster (Eds.).
362. Wilkinson T.J., Hancock G.J. Tests to Determine Plastic Behaviour of Knee Joints in Cold-Formed RHS. Journal of Structural Engineering, ASCE 2000, 126(3):297-305.
363. Wilkinson T.J., Petrovski T., Bechara E., Rubal M. Experimental Investigation of Slot Lengths In RHS Bracing Members. Advances in Steel Structures 2002, 205-212. Elsevier Science Ltd, Amsterdam. S.L. Chan, J.G. Teng, K.F. Chung (Eds.).
364. Willibald S., Packer J.A., Martinez Saucedo G., Puthli R.S. Shear Lag in Slotted Gusset Plate Connections to Tubes. Proceedings, Fifth ECCS/AISC Workshop on Steel Connections 2004, Session 8, Paper No. 3, Amsterdam, The Netherlands.
365. Willibald S., Puthli R.S., Packer J.A. Investigation on Hidden RHS-Joint Connections under Tensile Loading. Tubular Structures X 2003, 217-225. Balkema, Oxford. M.A. Jaurrieta, A. Alonso, J.A. Chica (Eds.).
366. Wright H.D. Local Stability of Filled and Encased Steel Sections. Journal of Structural Engineering, ASCE 1995, 121(10):1382-1388.
367. Zhao X.L., Hancock G.J. Tests to Determine Plate Slenderness Limits for Cold-Formed Rectangular Hollow Sections of Grade C450. Steel Construction, Journal of the Australian Institute of Steel Construction 1991, 25(4):2-16.
368. Zhao X.L., Puthli R.S. Comparison of SCF Formulae and Fatigue Strength for Uniplanar RHS K-Joints with Gap 1998, IIW Doc. XV-E-98-235, Monash University, Rotterdam.
369. Zhao X.L., Herion S., Packer J.A., Puthli R.S., Sedlacek G., Wardenier J., Weynand K., van Wingerde A.M., Yeomans N. Design Guide for Circular and Rectangular Hollow Section Welded Joints under Fatigue Loading 2000, TüV-Verlag, Melbourne, Australia.
370. Zhao X.L. Section Capacity of Very High Strength (VHS) Circular Tubes under Compression. Thin-Walled Structures 2000, 37(3):223-240.
371. Zhao X.L., Grzebieta R.H. Strength and Ductility of Concrete Filled Double Skin (SHS inner and SHS outer) Tubes. Thin-Walled Structures 2002, 40(2):193-213.
372. Zhao X.L., Grundy P., Han L.H. Behaviour of Grouted Sleeve Connection at Elevated Temperature. Proceedings, Tubular Structures IX 2001, 453-460. Balkema, Köln, Germany. R.S. Puthli, S. Herion (Eds.).
373. Zhao X.L., Grzebieta R.H., Elchalakani M. Tests of Concrete-Filled Double Skin CHS Composite Stub Columns. Steel & Composite - An International Journal 2002, 2(2):129-146.
374. Zhao X.L., Grzebieta R.H., Ukur A., Elchalakani M. Tests on Concrete-Filled Double Skin (SHS outer and CHS inner) Composite Stub Columns. Advances in Steel Structures 2002, 567-574. Elsevier Science Ltd, Lisse, The Netherlands. S.L. Chan, J.G. Teng, K.F. Chung (Eds.).
375. Zhao X.L., Binh D.V., Al-Mahaidi R., Tao Z. Stub Column Tests of Fabricated Square and Triangular Sections Utilizing Very High Strength Steel Tubes. Journal of Constructional Steel Research 2004, 60(11):1637-1661.