SCOPUS 정보 검색 플랫폼

Journal of Structural Engineering

Volumn 128, Issue 1, 2002, Pages 22-31

Fatigue tests and design of thin cold-formed square hollow section-to-plate T connections under cyclic in-plane bending

(3) Mashiri, Fidelis Rutendo b Zhao, Xiao Ling a,b Grundy, Paul b

a ASCE ^*

b MONASH UNIVERSITY (Australia)

Author keywords

Bending; Fatigue tests; Hollow sections; Thin wall sections; Welded joints

Indexed keywords

BENDING STRENGTH; FATIGUE TESTING; GALVANIZING; LEAST SQUARES APPROXIMATIONS; PLATES (STRUCTURAL COMPONENTS); STRESS ANALYSIS; STRUCTURAL ANALYSIS; THIN WALLED STRUCTURES; WELDING;

FATIGUE LOADING; HOLLOW SECTIONS; STRESS RATIO; THIN WALL TUBULAR SECTIONS;

WELDS;

EID: 0036160610 PISSN: 07339445 EISSN: None Source Type: Journal
DOI: 10.1061/(ASCE)0733-9445(2002)128:1(22) Document Type: Article

Times cited : (31)

References (44)

1
- 10844253469
- Standard practice for statistical analysis of linear or linearized stress-life (S-N) and strain-life (ε-N) fatigue data
- ASTM; ASTM Designation E739-91; American Society for Testing and Materials, West Conshocken, Pa.
- (1991) Proc., ASTM Committee E-8 on Fatigue and Fracture , pp. 129-137

2
- 0003774715
- Guidance on methods for assessing acceptability of flaws in fusion welded structures
- BSI; PD 6493, British Standards Institute, London
- (1991)

3
- 0003542832
- Cold formed welded structural hollow sections of non-alloy and fine grain steels-Part 2: Tolerances, dimensions and sectional properties
- CEN; EN10219-2, Committee for European Standardization, Brussels, Belgium
- (1997)

4
- 0004077303
- Limit states design of steel structures
- CSA; CAN/CSA-S16.1-M94, Canadian Standards Association, Rexdale, Ontario, Canada
- (1994)

5
- 0024866941
- The effect of plate thickness on fatigue life of welded tubular joints and flat specimens
- (1989) Proc., 8th Int. Conf. on Offshore Mechanics and Arctic Engineering, The Hague, The Netherlands , pp. 31-37
- De Back, J.¹ Van Delft, D.R.V.² Noordhoek, C.³

6
- 0003517357
- Department of Energy; HMSO, London, UK
- (1990) Offshore Installations: Guidance on Design, Construction and Certification, 4th Ed.

7
- 0003518392
- Eurocode 3: Design of steel structures-Part 1.1: General rules and rules for buildings
- EC3; ENV 1993-1-1, European Committee for Standardization, Brussels, Belgium
- (1992)

8
- 0343686331
- Fatigue design procedures for welded hollow section joints
- IIW (International Institute of Welding); IIW Doc. XIII-1804-99, IIW Doc. XV-1035-99; X.L. Zhao and J. A. Packer, eds., Abington, Cambridge UK
- Recommendations for IIW Subcommission XV-E

9
- 0003726169
- Limit states design in structural steel
- Canadian Institute of Steel Construction, Ontario, Canada
- (1995)
- Kulak, G.L.¹ Adams, P.F.² Gilmor, M.J.³

10
- 0003593111
- Applied Science, Essex, U.K.
- (1975) Statistical Design of Fatigue Experiments
- Little, R.E.¹ Jebe, E.H.²

11
- 0003568953
- Abington, Cambridge, U.K.
- (1991) Fatigue Strength of Welded Structures, 2nd Ed.
- Maddox, S.J.¹

12
- 10844247602
- Effects of weld undercut on the fatigue life of welded connections in thin-walled structures
- (1998) Structural Integrity and Fracture Procs., Australian Fracture Group Inc., Melbourne, Australia , pp. 81-91
- Mashiri, F.R.¹ Zhao, X.L.² Grundy, P.³

13
- 0008191255
- Fatigue analysis of welded connections in high strength cold-formed SHS (t < 4 mm)
- Dep. of Civil Engineering, Monash Univ., Australia
- (1999) CIDECT Project No. 7T, Interim Rep. No. 2
- Mashiri, F.R.¹ Zhao, X.L.² Grundy, P.³

14
- 0034249656
- Crack propagation analysis of welded thin-walled joints using boundary element method
- (2000) Computational Mechanics , vol.26 , Issue.2 , pp. 157-165
- Mashiri, F.R.¹ Zhao, X.L.² Grundy, P.³

15
- 0001788430
- Statistical S-N testing method with 14 specimens: JSME standard method for determination of S-N curves
- Tanaka, T., Nishijima, S., and Ichikawa, M., eds., Vol. 2, Elsevier Applied Science, New York
- (1987) Statistical Research on Fatigue and Fracture , pp. 59-69
- Nakazawa, H.¹ Kodama, S.²

16
- 10844228618
- The fatigue behavior of welded joints in square hollow sections-Part 2, Analysis
- Stevin Rep. 6-80-4, TNO-IBBC Rep. B1-80-10/0063.4.3821, Dep. of Civil Engineering, Delft Univ. of Technology, Delft, The Netherlands
- (1980)
- Noordhoek, C.¹ Wardenier, J.² Dutta, D.³

17
- 0003652387
- Canadian Institute of Steel Construction, Ontario, Canada
- (1997) Hollow Structural Section Connections and Trusses-A Design Guide, 2nd Ed.
- Packer, J.A.¹ Henderson, J.E.²

18
- 0008284273
- Fatigue strength of welded unstiffened RHS joints in lattice structures and vierendeel girders, final rep. Part III: Evaluation for design rules
- TNO-IBBC Rep. No. B1-89-097/63.5.3800, Stevin Rep. No. 25-6-89-36/AI, June, Delft Univ. of Technology, Delft, The Netherlands
- (1989)
- Puthli, R.S.¹ De Koning, C.H.M.² Van Wingerde, A.M.³ Wardenier, J.⁴ Dutta, D.⁵

19
- 0008276823
- Methods of destructive testing of welds in metal, Part 5: Metallographic tests, Method 5.1: Macro test-cross-section examination
- SAA; AS 2205.5.1-1988, Standards Association of Australia, Sydney, Australia
- (1988)

20
- 0008191762
- Methods of destructive testing of welds in metal, Part 6: Hardness tests, Methods 6.1: Weld joint hardness test
- SAA; AS 2205.6.1-1988, Standards Association of Australia, Sydney, Australia
- (1988)

21
- 0003907567
- Structural steel hollow sections
- SAA; AS1163-1991, Standards Association of Australia, Sydney, Australia
- (1991)

22
- 0004115892
- Structural steel welding, Part 1: Welding of steel structures
- SAA; AS/NZS 1554.1, Standards Association of Australia, Sydney, Australia
- (1995)

23
- 0008231811
- Structural steel welding, Part 5: Welding of steel structures subject to high levels of fatigue loading
- SAA; AS/NZS 1554.5, Standards Association of Australia, Sydney, Australia
- (1995)

24
- 0004254163
- Steel structures
- SAA; AS 4100-1998, Standards Association of Australia, Sydney, Australia
- (1998)

25
- 0008231498
- Tubemakers of Australia Ltd.; The Welding Guide No. 1, Produced by Tubemakeers Structural and Engineering Products, a Division of Tubemakers of Australia Ltd, April, Sydney, Australia
- (1994) The DuraGal and Galtube Plus Easy Welding Guide

26
- 0021822895
- Evaluation of the European fatigue test data on large size welded tubular joints for offshore structures
- (1985) 17th Annual Offshore Technology Con., Houston , pp. 351-356
- Van Delft, D.R.V.¹ Noordhoek, C.² De Back, J.³

27
- 0008230730
- Low cycle fatigue of welded structures-Part C: Tubular T- and X-joints
- Delft Univ. of Technology, Delft, The Netherlands
- (1988) Stevin Laboratory Report
- Van Der Vegte, G.J.¹

28
- 0026461544
- The fatigue behaviour of T- and X-joints made of square hollow sections
- (1992) Heron , vol.37 , Issue.2 , pp. 1-180
- Van Wingerde, A.M.¹

29
- 0030082183
- New guidelines for fatigue design of HSS connections
- (1996) J. Struct. Eng. , vol.122 , Issue.2 , pp. 125-132
- Van Wingerde, A.M.¹ Packer, J.A.² Wardenier, J.³

30
- 0001803305
- Scale effects on the fatigue behaviour of tubular structures
- (1997) IIW Int. Conf. on Performance of Dynamically Loaded Welded Structures, San Francisco , pp. 123-135
- Van Wingerde, A.M.¹ Van Delft, D.R.V.² Wardenier, J.³ Packer, J.A.⁴

31
- 0008236941
- The probability of success using deterministic reliability
- Marquis G., and Solin, J., eds., ESIS Publication 23, Elsevier Science, New York
- (1999) Fatigue Design and Reliability
- Wallin, K.¹

32
- 4243598983
- The weldability of steels
- WTIA; TN I-96, WTIA Technical Note No. 1, Welding Technology Institute of Australia, NSW, Australia
- (1996)

33
- 0008231666
- Commentary on the structural steel welding standard AS/NZS 1554
- WTIA; TN 11-98, WTIA Technical Note No. 11, Published jointly by the Welding Technology Institute of Australia and the Australian Institute of Steel Construction, NSW, Australia
- (1998)

34
- 0032672059
- Longitudinal fillet welds in thin-walled C450 RHS members
- (1999) J. Struct. Eng. , vol.125 , Issue.8 , pp. 821-828
- Zhao, X.L.¹ Al-Mahaidi, R.² Kiew, K.P.³

35
- 0026206501
- T-joints in rectangular hollow sections subject to combined actions
- (1991) J. Struct. Eng. , vol.117 , Issue.8 , pp. 2258-2277
- Zhao, X.L.¹ Hancock, G.J.²

36
- 0026838366
- Square and rectangular hollow sections subject to combined actions
- (1992) J. Struct. Eng. , vol.118 , Issue.3 , pp. 648-668
- Zhao, X.L.¹ Hancock, G.J.²

37
- 0029379127
- Square and rectangular hollow sections under transverse end bearing force
- (1995) J. Struct. Eng. , vol.121 , Issue.9 , pp. 1323-1329
- Zhao, X.L.¹ Hancock, G.J.²

38
- 0029411579
- Butt welds and transverse fillet welds in thin cold-formed RHS members
- (1995) J. Struct. Eng. , vol.121 , Issue.11 , pp. 1674-1690
- Zhao, X.L.¹ Hancock, G.J.²

39
- 0029410963
- Longitudinal fillet welds in thin cold-formed RHS members
- (1995) J. Struct. Eng. , vol.121 , Issue.11 , pp. 1683-1690
- Zhao, X.L.¹ Hancock, G.J.²

40
- 0008236210
- Welded connections in thin cold-formed rectangular hollow sections
- R. Bjorhovde, A. Colson, and R. Zandonini, eds., Pergamon, Oxford, Trento, Italy
- (1996) Proc., Conf. Connections in Steel Structures III , pp. 89-98
- Zhao, X.L.¹ Hancock, G.J.²

41
- 0032036176
- Recent research on cold-formed tubular structures
- (1998) J. Const. Steel Res. , vol.46 , pp. 474-475
- Zhao, X.L.¹ Hancock, G.J.²

42
- 0029411348
- Lateral buckling tests of cold-formed RHS beams
- (1995) J. Struct. Eng. , vol.121 , Issue.11 , pp. 1565-1573
- Zhao, X.L.¹ Hancock, G.J.² Trahair, N.S.³

43
- 0003740143
- Verlag TÜV Rheinhald, Köln, Germany
- (2000) Design Guide for Circular and Rectangular Hollow Section Joints Under Fatigue Loading
- Zhao, X.L.¹ Herion, S.² Packer, J.A.³ Puthli, R.⁴ Sedlacek, G.⁵ Wardenier, J.⁶ Weynand, K.⁷ Van Wingerde, A.⁸ Yeomans, N.⁹

44
- 0032036047
- Recent innovations in cold-formed tubular sections
- (1998) J. Const. Steel Res. , vol.46 , pp. 472-473
- Zhao, X.L.¹ Mahendran, M.²

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.