Handbook of Fire and Explosion Protection Engineering Principles

Handbook of Fire and Explosion Protection Engineering Principles

Volumn , Issue , 2011, Pages

  Nolan, Dennis P ^a  

^a SAUDI ARAMCO   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013731216     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2009-0-64221-5     Document Type: Book

References (280)

1. Ellis W.D. On The Oil Lands 1983, R. R. Donnelly & Sons, Willard, OH.
2. Gibbens P.H. Early Days of Oil, A Pictorial History of the Beginnings of the Industry in Pennsylvania 1948, Princeton University Press, Princeton, NJ.
3. Head G.L., Horn S. Essentials of the Risk Management Process, Volumes I & II 1985, Insurance Institute of America, Malvern, PA.
4. Knowles R.S. The First Pictorial History of the American Oil and Gas Industry 1859-1983 1983, Ohio University Press, Athens, OH.
5. MacDonald D. Corporate Risk Control 1990, John Wiley and Sons, Co., New York, NY.
6. Rundell W. Early Texas Oil, A Photographic History, 1866-1936 1977, Texas A & M University Press, College Station, TX.
7. Sanders R.E. Chemical Process Safety, Learning from Case Histories 1999, Butterworth Heinemann, Oxford, UK.
8. An Introduction to Energy Insurance 1994, Sedwick Energy Limited, Sedwick Energy, London, UK.
9. Sprague De Camp L. The Ancient Engineers 1963, Dorset Press, New York, NY.
10. Petroleum Risks: A Burning Issue 1992, Swiss Reinsurance Company (Swiss Re), Swiss Re, Zurich, Switzerland.
11. Anderson R.O. Fundamentals of the Petroleum Industry 1987, University of Oklahoma Press, Norman, OK.
12. Baker R.A. Primer of Offshore Operations 1998, Petroleum Extension Service, University of Texas, Austin, TX. 3rd Edition.
13. Dyke K.V. A Primer of Oilwell Service, Workover and Completion 1997, Petroleum Extension Service, University of Texas, Austin, TX.
14. Paul Dr.B. Primer of Oilwell Drilling 2008, University of Texas, Austin, TX. 7th.
15. Petroleum Extension Service A Dictionary for the Oil and Gas Industry 2005, Petroleum Extension Service, University of Texas, Austin TX.
16. Petroleum Extension Service Fundamentals of Petroleum 1997, Petroleum Extension Service, University of Texas, Austin, TX. 4th Edition.
17. Shell International Petroleum Company Ltd., The Petroleum Handbook, Elsevier Science Publishing Co., Inc., Amsterdam, The Netherlands, 1986.
18. RP 75L, Recommended Practices for Development of a Safety and Environmental Management Program for Outer Continental Shelf (OCS) Operations and Facilities 2007, American Petroleum Institute (API), API, Washington, D.C.
19. RP 76, Contractor Safety Management for Oil and Gas Drilling and Production Operations 2007, American Petroleum Institute (API), API, Washington, D.C. Second Edition,.
20. RP 750, Management of Process Hazards 1990, American Petroleum Institute (API), API, Washington, D.C.
21. Guidelines for Engineering Design for Process Safety 1993, Center for Chemical Process Safety (CCPS), AIChE, New York, NY.
22. U.S. Regulation 40 CFR Part 68, Risk Management Chemical Release Prevention Provisions 1994, Environmental Protection Agency (EPA), EPA, Washington, D.C.
23. A Guide to the Control of Industrial Major Accident Hazards Regulations, COMAH 1999, Health and Safety Executive (HSE), HMSO, London, UK.
24. A Guide to Offshore Installation (Safety Case) Regulations 2005, Health and Safety Executive (HSE), HMSO, London, UK.
25. Kletz T.A. Process Plants: A Handbook for Inherently Safer Design 1998, CRC Press, Boca Raton, FL.
26. Lees' Loss Prevention in the Process Industries. Hazard Identification, Assessment and Control 2005, Elsevier Butterworth-Heinemann, Oxford, UK. Third Edition. S. Mannan (Ed.).
27. U.S. Regulation 29 CFR 1919.119, Process Safety Management of Highly Hazardous Chemicals, Explosives and Blasting Agents, Department of Labor 1992, Occupational Safety and Health Administration (OSHA), OSHA, Washington, D.C.
28. Compressed Gas Association Handbook of Compressed Gases 1999, Springer Publishing Company,, New York, NY. 4th Edition.
29. Fenstermaker, R. W., "Study of Autoignition for Low Pressure Fuel-Gas Blends Helps Promote Safety", Oil and Gas Journal, February 15, 1982.
30. Maxwell J.B. Data Book on Hydrocarbons, Applications to Process Engineering 1975, Krieger Publishing Company, Malabar, FL.
31. Fire Protection Handbook 2008, National Fire Protection Association (NFPA), NFPA, Boston, MA. 20th Edition.
32. NFPA 30 Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Boston, MA.
33. Nolan, D. P., A Study of Auto-ignition Temperatures of Hydrocarbon Mixtures as Applied to Electrical Area Classification, Saudi Aramco Journal of Technology, Saudi Aramco Oil Company, Dhahran, Saudi Arabia, Summer, 1996.
34. Parkash, S., Phd., Petroleum Fuels Manufacturing Handbook: Including Specialty Products and Sustainable Manufacturing Techniques, McGraw-Hill Professional, New York, NY, 2009.
35. SFPE Handbook of Fire Protection Engineering 2008, Society of Fire Protection Engineers, NFPA, Boston, MA. 4th Edition.
36. Spencer A.B., Colonna G.R. Fire Protection Guide to Hazardous Materials 2002, National Fire Protection Association (NFPA), Boston, MA. 13th Edition.
37. Publication 4545, Hazard Response Modeling Uncertainty (A Quantitative Method): Users Guide for Software for Evaluating Hazardous Gas Dispersion Models 1992, American Petroleum Institute (API), API, Washington, D.C., Volume 1.
38. Publication 4546, Hazard Response Modeling Uncertainty (A Quantitative Method): Evaluation of Commonly Used Dispersion Models, 1992, American Petroleum Institute (API), API, Washington, D.C., Volume 2.
39. Publication 4547, Hazard Response Modeling Uncertainty (A Quantitative Method): Components of Uncertainty in Hazardous Gas Dispersion Models, 1992, American Petroleum Institute (API), API, Washington, D.C., Volume 3.
40. Guidelines for Evaluating the Characteristics of Vapor Cloud Explosions, Flash Fires, and BLEVEs 1994, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), New York, NY.
41. Guidelines for Use of Vapor Cloud Dispersion Models 1996, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), New York, NY. 2nd Edition.
42. Plant Guidelines for Technical Management of Chemical Process Safety 1992, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), New York, NY.
43. Department of Labor, 29 CFR 1910.119 & 1926.64, Process Safety Management of Highly Hazardous Chemicals, Occupational Safety and Health Administration (OSHA), Washington, D.C., 1992.
44. Dugan Dr.K. Unconfined Vapor Cloud Explosions 1978, Gulf Publishing Houston, TX.
45. Krieth, F., Bohn, M.S. Principles of Heat Transfer 2001, Brooks/Cole, Pacific Grove, CA. 6th Edition.
46. Fire Protection Handbook 2008, National Fire Protection Association (NFPA), NFPA, Boston, MA. 20th Edition.
47. SFPE Handbook of Fire Protection Engineering 2008, Society of Fire Protection Engineers, NFPA, Boston, MA. 4th Edition.
48. Incidents That Define Process Safety 2008, American Institute of Chemical Engineers (AIChE), AIChE/Wiley, New York, NY.
49. The 100 Largest Losses 1972-2009 Large Property Damage Losses in the Hydrocarbon-Chemical Industries 2010, Marsh Global Risk Engineering, London, UK. 21st Edition. I. Clough (Ed.).
50. Kletz T.A. Still Going Wrong! Case Histories of Process Plant Disasters and How They Could Have Been Avoided 2003, Gulf Publishing/Butterworth-Heinemann, Burlington, MA.
51. Kletz T.A. What Went Wrong? Case Histories of Process Plant Disasters and How They Could Have Been Avoided 2009, Gulf Publishing/Elsevier, Burlington, MA. 5th Edition.
52. Nolan, D. P. A Statistical Review of Fire and Explosion Incidents in the Gulf of Mexico, 1980-1990, Journal of Fire Protection Engineering, Vol.VII, No. 3 Society of Fire Protection Engineers (SFPE) 1995.
53. RP 14C, Recommended Practice for Analysis, Design, Installation, and Testing of Basic Subsurface Safety Systems for Offshore Production Platforms 2007, American Petroleum Institute (API), API, Washington, DC. 7 th Edition.
54. RP 14J Recommended Practice for Hazard Analysis, for Offshore Platforms 2007, American Petroleum Institute (API), API, Washington, DC. 2 th Edition.
55. RP 75 Recommended Practice for Development of a Safety and Environmental management Program for Offshore Operations and Facilities 2004, American Petroleum Institute (API), API, Washington, DC. 3rd Edition.
56. Block A. Murphy's Law, Book Two, More Reasons Why Things Go Wrong! 1980, Price/Stern/Sloan, Los Angeles, CA.
57. Guidelines for Chemical Process Quantitative Risk Analysis 1999, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY. 2 nd Edition.
58. Guidelines for Developing Quantitative Safety Risk Criteria 2009, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY.
59. Guidelines for Hazard Evaluation Procedures 2008, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY. 3rd Edition.
60. Guidelines for Process Equipment Reliability Data 1989, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY.
61. Guidelines for Risk Based Process Safety 2007, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY.
62. Layers of Protection Analysis: Simplified Process Risk Assessment 2001, Center for Chemical Process Safety (CCPS), AIChE, New York, NY.
63. OREDA (Offshore Reliability Data) Handbook 2009, Des Norske Veritas (DNV), DNV, Horvik, Norway. 5 th Edition.
64. Fire and Explosion Index Hazard Classification Guide 1994, Dow Chemical Company, Wiley-American Institute of Chemical Engineers, New York, NY. 7 th Edition.
65. European Safety Reliability & Data Association (ESReDA), Guidance Document for Design, Operation and Use of Safety, Health and Environment (SHE) Databases, DNV, Horvik, Norway.
66. A Guide to the Offshore Installation (Safety Case) Regulations 2005 2006, Health and Safety Executive (HSE), HMSO, London, UK. 2 nd Edition.
67. Lees' Loss Prevention in the Process Industries. Hazard Identification, Assessment and Control 2005, Butterworth-Heinemann, Oxford, UK. 3 rd Edition. S. Mannan (Ed.).
68. NFPA 550, Guide to the Fire Safety Concepts Tree 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
69. Nolan Dennis P. Safety and Security Review for the Process Industries, Application of HAZOP, PHA, and What-If Reviews 2008, William Andrew Inc, Norwich, NY. 2 nd Edition.
70. American Petroleum Institute (API), Recommended Practice 752, Management of Hazards Associated with Location of Process Plant Permanent Buildings, 3rd Edition, API, Washington, DC, 2009.
71. Recommended Practice 753, Management of Hazards Associated with Location of Process Plant Portable Buildings 2007, American Petroleum Institute (API), API, Washington DC.
72. Guidelines for Facility Siting and Layout, Wiley-AIChE 2003, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York NY.
73. Guidelines for Evaluating Process Plant Buildings for External Explosions, Fires and Toxics 2005, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY. 2nd Edition.
74. Property Loss Prevention Data Sheet 7-44/17-3, Spacing of Facilities in Outdoor Chemical Plants 2000, FM Global, FM Global, Norwood MA.
75. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy MA.
76. NFPA 59, Utility LP-Gas Plant Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
77. GAP 2.5.2, Oil and Chemical Plant Layout and Spacing 2007, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
78. RP 12R1, Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks in Production Service 2008, American Petroleum Institute (API), API, Washington, DC. 5th Edition.
79. Bulletin D16, Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans 1989, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
80. RP 2001, Design, Construction, Operation, Maintenance, and Inspection of Terminal and Tank Facilities 2005, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
81. RP 2610, Fire Protection in Refineries 2005, American Petroleum Institute (API), API, Washington, DC. 8th Edition.
82. ASME A112.1.2, Air Gaps in Plumbing Systems (for Plumbing Fixtures and Water-Connected Receptors) 2004, American Society of Mechanical Engineers (ASME), ASME, New York, NY.
83. Property Loss Prevention Data Sheet 7-83, Drainage Systems for Flammable Liquids 2000, FM Global, Norwood, MA.
84. Property Loss Prevention Data Sheet 7-88, Flammable Liquid Storage Tanks 2000, FM Global, FM Global, Norwood, MA.
85. IEEE 979 Guide for Substation Fire Protection 1994, Institute of Electrical and Electronic Engineers (IEEE), IEEE, Piscataway, NJ.
86. I EEE 980 Guide for Containment and Control of Oil Spills in Substations, 1994, Institute of Electrical and Electronic Engineers (IEEE), IEEE, Piscataway, NJ.
87. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
88. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
89. NFPA 58, Liquefied Petroleum Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
90. NFPA 59A, Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
91. NFPA 329, Handling Releases of Flammable and Combustible Liquids and Gases 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
92. GAP.2.5.3, Drainage for Outdoor Oil and Chemical Plants 2000, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
93. American National Standard Institute (ANSI)/Instrument Society of America (ISA), S84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI/ISA-84.00.01-2004, Part 1 (IEC 61511-1 Mod), ANSI, 2004.
94. American Petroleum Institute (API), RP 14C, Recommended Practice for Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms, 7th Edition, API, Washington, DC, 2007.
95. American Petroleum Institute (API), RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, 5th Edition, API, Washington, DC, 2008.
96. American Petroleum Institute (API), RP 540, Electrical Installations in Petroleum Processing Plants, 4th Edition, API, Washington, DC, 2004.
97. American Petroleum Institute (API), RP 551, Process Management Instrumentation, API, Washington, DC, 1993.
98. Guidelines for Engineering Design for Process Safety 1993, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), New York, NY.
99. Engineering Equipment & Materials Users' Association (EEMUA), Publication 191, Alarm Systems - A Guide to Design, Management and Procurement, 2nd Edition, EEMUA, London, UK, 2007.
100. FM Global, Property Loss Prevention Data Sheet 7-45, Instrumentation and Control in Safety Applications, FM Global, Norwood, MA, 2000.
101. Gruhn P., Cheddie H.L. Safety Instrumented Systems: Design, Analysis, and Justification 2006, ISA, Research Triangle Park, NC. 2nd Edition.
102. Marszal, E. M., and Scharph, E. W., Safety Integrity Level Selection: Systematic Methods Including Layer of Protection Analysis, ISA, 2002.
103. National Fire Protection Association (NFPA), NFPA 85, Boiler and Combustion Systems Hazards Code, NFPA, Quincy, MA, 2007.
104. American National Standard Institute (ANSI)/Instrument Society of America (ISA), S84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2 Guidelines for the Application of ANSI/ISA-84.00.01-2004, Part 1 (IEC 61511-1 Mod), ANSI, 2004.
105. RP 14A, Specification for Subsurface Safety Valve Equipment 2005, American Petroleum Institute (API), API, Washington, DC. 11th Edition.
106. RP 14B, Design, Installation, Repair and Operation of Subsurface Safety Valve Systems 2005, American Petroleum Institute (API),, API, Washington, DC. 5th Edition.
107. RP 14C, Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms 2007, American Petroleum Institute (API), API, Washington, DC. 7th Edition.
108. RP 14H, Recommended Practice for Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Valves Offshore 2007, American Petroleum Institute (API), API, Washington, DC. 5th Edition.
109. Specification 16D, Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment 2004, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
110. Standard 607, Fire Test for Soft-seated Quarter-turn Valves 2005, American Petroleum Institute (API), API, Washington, DC. 5th Edition.
111. Guidelines for Safe Automation of Chemical Processes 1993, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), New York, NY.
112. Lees' Loss Prevention in the Process Industries, Hazard Identification, Assessment and Control 2005, Elsevier Butterworth-Heinemann, Oxford, UK. Third Edition. S. Mannan (Ed.).
113. NFPA 79, Electrical Standard for Industrial Machinery 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
114. American Petroleum Institute (API), RP 14J, Recommended Practice for Design and Hazard Analysis for Offshore Production Facilities, 2nd Edition, Washington, DC, 2007.
115. American Petroleum Institute (API), Standard 520, Sizing, Selection and Installation of Pressure Relieving Devices in Refineries, Part -1 Sizing and Selections, 8th Edition, Washington, DC, 2008.
116. American Petroleum Institute (API), ANSI/API Standard 521, Pressure-Relieving and Depressuring Systems, 5th Edition, Washington, DC, 2007.
117. Standard 2000, Venting Atmospheric and Low Pressure Storage Tanks (Non-refrigerated and Refrigerated) 2008, American Petroleum Institute (API), University of Texas, Washington, DC.
118. Boiler and Pressure Vessel Code 2007, American Society of Mechanical Engineers (ASME), ASME, New York, NY.
119. Property Loss Prevention Data Sheet 7-49, Emergency Venting of Vessels 2000, FM Global, FM Global, Norwood, MA.
120. NFPA 15, Water Spray Fixed Systems for Fire Protection 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
121. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
122. UL 1709, Rapid Rise Fire Tests of Protection Materials for Structural Steel 2005, Underwriters Laboratories (UL), UL, Northbrook, IL.
123. RP 14J, Recommended Practice for Design and Hazard Analysis for Offshore Production Facilities 2007, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
124. Standard 520, Sizing, Selection and Installation of Pressure Relieving Devices in Refineries, Part -1 Sizing and Selections 2008, American Petroleum Institute (API), API, Washington, D.C. 8th Edition.
125. ANSI/API Standard 521, Pressure-Relieving and Depressuring Systems 2007, American Petroleum Institute (API),, API, Washington, D.C. 5th Edition,.
126. API Standard 526, Flanged Steel Pressure-Relief Valves 2009, American Petroleum Institute (API), API, Washington, D.C. 6th Edition.
127. Code B31.3, Process Piping 2008, American National Standard Institute (ANSI)/American Society of Mechanical Engineers (ASME), ASME, New York, NY.
128. Boiler and Pressure Vessel Code 2007, American Society of Mechanical Engineers (ASME), ASME, New York, NY.
129. Property Loss Prevention Data Sheet 7-49, Emergency Venting of Vessels 2000, FM Global, FM Global, Norwood, MA.
130. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
131. GAP.7.0.5.0, Overpressure and Vacuum Protection 2003, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
132. Z49.1, Safety in Welding, Cutting, and Allied Processes 2005, American National Standards Institute (ANSI), ANSI, New York NY.
133. RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 2002, American Petroleum Institute (API), API, Washington DC. 2nd Edition.
134. RP 2003 Protection Against Ignitions Arising Out of Static, Lightning and Stray Currents, Downstream Segment 2008, American Petroleum Institute (API), API, Washington DC. 7th Edition.
135. RP 2009 Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries 2007, American Petroleum Institute (API), API, Washington DC. 7th Edition.
136. RP 2016 Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks 2001, American Petroleum Institute (API), API, Washington DC.
137. RP 2201 Procedures for Welding or Hot Tapping on Equipment in Service 2003, American Petroleum Institute (API), API, Washington, DC. 5th Edition.
138. RP 2214, Spark Ignition Properties of Hand Tools 2004, American Petroleum Institute (API), API, Washington DC. 4th Edition.
139. RP 2216, Ignition Risk of Hydrocarbon Liquids and Vapors by Hot Surfaces in the Open Air 2003, American Petroleum Institute (API), API, Washington, DC. 3rd Edition.
140. Avoiding Static Ignition Hazards in Chemical Operations 1999, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York NY.
141. Electrostatic Ignitions of Fires and Explosions 1998, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York NY.
142. Property Loss Prevention Data Sheet 5-1, Electrical equipment in Hazardous (Classified) Locations 2006, FM Global, FM Global, Norwood, MA.
143. Property Loss Prevention Data Sheet 5-8 Static Electricity 2001, FM Global, FM Global, Norwood, MA.
144. Property Loss Prevention Data Sheet 5-10 Protective Grounding for Electric Power Systems and Equipment 2003, FM Global, FM Global, Norwood, MA.
145. Property Loss Prevention Data Sheet 5-11 Lightning and Surge Protection for Electrical Systems 2000, FM Global, FM Global, Norwood, MA.
146. NFPA 30 Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy MA.
147. NFPA 30A, Motor Fuel Dispensing Facilities and Repair Garages 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
148. NFPA 51B, Standard for Fire Prevention During Welding Cutting, and other Hot Work 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
149. NFPA 70, National Electrical Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy MA.
150. NFPA 77, Static Electricity 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
151. NFPA 496 Purged and Pressurized Enclosures for Electrical Equipment 2008, National Fire Protection Association (NFPA),, NFPA, Quincy MA.
152. NFPA 497, Classification of Flammable Liquids, Gases or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas 2008, National Fire Protection Association (NFPA), NFPA, Quincy MA.
153. NFPA 780, Installation of Lighting Protection Systems 2008, National Fire Protection Association (NFPA), NFPA, Quincy MA.
154. UL 674, Electrical Motors and Generators for Use in Division 1 Hazardous (Classified) Locations 2003, Underwriters Laboratories (UL), UL, Northbrook IL.
155. UL 913, Intrinsically Safe Apparatus and Associated Apparatus for Use in Class 1 2 3 Division 1 Hazardous (Classified) Locations 2006, Underwriters Laboratories (UL), UL, Northbrook, IL.
156. GAP. 5.2.1, Lighting Protection 2005, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford CT.
157. GAP.5.12.0.1, Hazardous (Classified) Location Electrical Equipment 2003, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford CT.
158. Manual of Petroleum Measurement Standards, Chapter 8, Sampling Section 2, Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products 2005, American Petroleum Institute (API), API, Washington, DC. 2 nd Edition.
159. Standard 520-Part II, Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries 2003, American Petroleum Institute (API), API, Washington, DC. 5 th Edition.
160. Standard 620, Design and Construction of Large, Welded, Low-Pressure Storage Tanks 2009, American Petroleum Institute (API), API, Washington, DC. 11 th Edition.
161. Standard 650, Welded Tanks for Oil Service 2009, American Petroleum Institute (API), API, Washington, DC. 11 th Edition.
162. Bulletin 2521, Use of Pressure-Vacuum Vent Valves for Atmospheric Loss 1993, American Petroleum Institute (API), API, Washington, DC. 1966 th Edition.
163. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
164. ANSI/API Standard 521, Pressure-Relieving and Depressuring Systems 2007, American Petroleum Institute (API), API, Washington, DC. 5th Edition.
165. API Recommended Practice 2028, Flame Arrestors in Piping Systems 2002, American Petroleum Institute (API), API, Washington, DC. 3rd Edition.
166. API Recommended Practice 2210, Flame Arrestors for Vents of Tanks Storing Petroleum Products 2000, American Petroleum Institute (API), API, Washington, DC. 3rd Edition.
167. API Standard 2218, Fireproofing Practices in Petroleum and Petrochemical Processing Plants 1999, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
168. API Standard 2510, Design and Construction of LPG Installations 2001, American Petroleum Institute (API), API, Washington, DC. 8th Edition.
169. API Standard 2510A, Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities 1996, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
170. ASCE 29 05, Standard Calculation Methods for Structural Fire Protection 2005, American Society of Civil Engineers (ASCE), ASCE, New York, NY.
171. E-119, Standard Test Methods for Fire Tests of Building Construction and Materials 2009, American Society of Testing Materials International (ASTM), ASTM, West Conshohocken, PA.
172. The Design and Evaluation of Physical Protection Systems 2001, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), AIChE/Wiley, New York, NY.
173. Guidelines for Evaluating Process Plant Buildings for External Explosions and Fires 1996, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), AIChE, New York, NY.
174. Guidelines for Fire Protection in Chemical, Petrochemical and Hydrocarbon Processing Facilities 2003, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), AIChE/Wiley, New York, NY.
175. Guidelines for Use of Vapor Cloud Dispersion Models 1996, Center for Chemical Process Safety (CCPS), American Institute of Chemical Engineers (AIChE), AIChE/Wiley, New York, NY. 2nd Edition.
176. NFPA 221, Standard for High Challenge Fire Walls, Fire Walls and Fire Barrier Walls 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
177. UL 263, Standard for Fire Tests of Building Construction and Materials 2003, Underwriters Laboratories (UL), UL, Northbrook, IL. 13th Edition.
178. UL 525, Standard for Flame Arrestors 2008, Underwriters Laboratories (UL), UL, Northbrook, IL. 8th Edition.
179. UL 555, Standard for Fire Dampers 2006, Underwriters Laboratories (UL), UL, Northbrook, IL. 7th Edition.
180. UL 555S, Standard for Smoke Dampers 1999, Underwriters Laboratories (UL), UL, Northbrook, IL. 4th Edition.
181. UL 1709, Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel 2005, Underwriters Laboratories (UL), UL, Northbrook, IL. 3rd Edition.
182. GAP. 2.2.1, Fire Walls, Fire Barriers and Fire Partitions 2002, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
183. GAP. 2.2.2, Fire Doors and Through Penetration Protection 2002, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
184. GAP. 2.5.1, Fireproofing for Hydrocarbon Fire Exposures 2006, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
185. API Recommended Practice 14C, Recommend Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms 2001, American Petroleum Institute (API), API, Washington, DC. 7th Edition.
186. API Recommended Practice 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 1997, American Petroleum Institute (API), API, Washington, DC. 2nd Edition.
187. Continuous Monitoring for Hazardous Material Releases 2009, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY.
188. Property Loss Prevention Data Sheet 5-40, Fire Alarm Systems 2007, FM Global, FM Global, Norwood, MA.
189. Property Loss Prevention Data Sheet 5-48, Automatic Fire Detection 2009, FM Global, FM Global, Norwood, MA.
190. Property Loss Prevention Data Sheet 5-49, Gas and Vapor Detectors and Analysis Systems 2000, FM Global, FM Global, Norwood, MA.
191. ISA RP 12.13.01, Performance Requirements for Combustible Gas Detectors 2003, Instrument Society of America, ISA.
192. ISA RP 12.13.02, Installation, Operation and Maintenance of Combustible Gas Detection Instruments 2003, Instrument Society of America, ISA.
193. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
194. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
195. NFPA 72, National Fire Alarm and Signaling Code 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
196. NFPA 90A, Standard for the Installation of Air-Conditioning and Ventilating Systems 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
197. NFPA 496, Standard for Purged and Pressurized Enclosures for Electrical Equipment 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA, (see Chapter 7, para 7.4.8).
198. NFPA 850, Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
199. UL 217, Standard for Single and Multiple Station Smoke Alarms 2006, Underwriters Laboratories (UL), UL, Northbrook, IL. 6th Edition.
200. UL 268, Smoke Detectors for Fire Alarm Systems 2009, Underwriters Laboratories (UL), UL, Northbrook, IL. 6th Edition.
201. UL 268A, Standard for Smoke Detectors for Duct Application 2008, Underwriters Laboratories (UL), UL, Northbrook, IL. 4th Edition.
202. UL 864, Standard for Control Units and Accessories for Fire Alarm Systems 2003, Underwriters Laboratories (UL), UL, Northbrook, IL. 9th Edition.
203. UL 2075, Standard for Gas and Vapor Detectors and Sensors 2004, Underwriters Laboratories (UL), UL, Northbrook, IL.
204. Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities 2007, American Society of Testing Materials (ASTM), ASTM, West Conshohocken, PA.
205. S3. 41, Audible Emergency Evacuation Signal 2008, Acoustical Society of America (ASA), ASA, New York, NY.
206. International Building Code 2009, International Code Council (ICC), ICC, Washington, D.C.
207. International Convention for the Safety of Life at Sea 1974, International Maritime Organization (IMO), IMO, London, UK.
208. National Fire Protection Association (NFPA) NFPA 101, Life Safety Code 2009, NFPA, Quincy, MA.
209. National Fire Protection Association (NFPA) NFPA 101B, Code for Means of Egress for Buildings and Structures 2002, NFPA, Quincy, MA.
210. Occupational Safety and Health Administration (OSHA), 29 CFR 1910.36 and 29 CFR 1910.37, Exit Routes, US Department of Labor, Washington, D.C., 2009.
211. Occupational Safety and Health Administration (OSHA), 29 CFR 1910.165, Employee Alarm Systems, US Department of Labor, Washington, D.C., 2009.
212. UL 305, Panic Hardware 1997, Underwriters Laboratories (UL),, UL, Northbrook, IL.
213. XL Global Asset Protection Services (XL GAPS), GAP. 1.7.0.1, Emergency Action Plans, XL GAPS, Stamford, CT, 2003.
214. RP 14G, Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms 2007, American Petroleum Institute (API), API, Washington, DC. 4th Edition.
215. API Standard 610, Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries 2004, American Petroleum Institute (API), API, Washington, DC. Tenth Edition.
216. RP 2021, Management of Atmospheric Storage Tank Fires 2006, American Petroleum Institute (API), API, Washington, DC. 4th Edition.
217. RP 2030, Application of Fixed water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries 2005, American Petroleum Institute (API), API, Washington, DC. 3rd Edition.
218. M17, Installation, Field Testing and Maintenance of Fire Hydrants 2006, American Water Works Association (AWWA), AWWA, Denver, CO.
219. M31, Distribution System Requirements for Fire Protection 1998, American Water Works Association (AWWA), AWWA, Denver, CO.
220. Guidelines for Fire Protection in Chemical, Petrochemical and Hydrocarbon Processing Facilities 2005, Center for Chemical Process Safety (CCPS), Wiley-AIChE, New York, NY.
221. AODC 055, Protection of Water Intake Points for Diver Safety 1991, International Association of Underwater Engineering Contractors, Association of Diving Contractors, London, UK.
222. Fire Protection Handbook 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA. 20th Edition.
223. NFPA 10, Standard for Portable Fire Extinguishers 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
224. NFPA 11, Standard for Low, Medium, and High Expansion Foam 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
225. NFPA 12, Standard on Carbon Dioxide Systems 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
226. NFPA 13, Standard for the Installation of Sprinkler Systems 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
227. NFPA 14, Standard for the Installation of Standpipe and Hose Systems 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
228. NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
229. NFPA 16, Installation of Foam-Water Sprinkler and Foam-Water Spray Systems 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
230. NFPA 17, Standard for Dry Chemical Extinguishing Systems 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
231. NFPA 17A, Standard on Wet Chemical Extinguishing Systems 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
232. NFPA 20, Standard for the Installation of Stationary Fire Pumps for Fire Protection 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
233. NFPA 22, Standard for Water Tanks for Private Fire Protection 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
234. NFPA 24, Installation of Private Fire Service Mains and Their Appurtenances 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
235. NFPA 25, Inspection, Testing and Maintenance of Water-Based Fire Protection Systems 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
236. NFPA 30, Flammable and Combustible Liquids Code 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
237. NFPA 86, Standard for Ovens and Furnaces 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
238. NFPA 101, Life Safety Code 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
239. NFPA 418, Standard for Heliports 2006, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
240. NFPA 850, Fire Protection for Electric Generating Plants and High Voltage Direct Converter Stations 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
241. NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems 2009, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
242. SFPE Handbook of Fire Protection Engineering 2008, Society of Fire Protection Engineers (SFPE), NFPA, Boston, MA. 4th Edition.
243. Underwriter's Laboratories (UL), UL 193, Standard for Alarm Valves for Fire Protection Service, Northbrook, IL, 2004.
244. Underwriter's Laboratories (UL), UL 260, Standard for Dry Pipe and Deluge Valves for Fire-Protection Service, Northbrook, IL, 2004.
245. Underwriter's Laboratories (UL), UL 262, Standard for Gate Valves for Fire Protection Service, Northbrook, IL, 2004.
246. Underwriter's Laboratories (UL), UL 312, Standard Check Valves for Fire Protection Service, Northbrook, IL, 2004.
247. Underwriter's Laboratories (UL), UL 448, Standard Centrifugal Stationary Pumps for Fire Protection Service, Northbrook, IL, 2007.
248. Underwriter's Laboratories (UL), UL 1091, Standard for Butterfly Valves for Fire Protection Service, Northbrook, IL, 2004.
249. GAP. 12.2.1.2, Fire Protection for Oil and Chemical Plants 2003, XL Global Asset Protection Services (XL GAPS), XL GAPS, Stamford, CT.
250. API RP 14G, Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms 2007, American Petroleum Institute (API), API, Washington, DC. 4th Edition.
251. EDM Services Inc., Hazardous Liquid Pipeline Risk Assessment, California State Fire Marshal, Sacramento, CA, 1993.
252. Grouset, D., et al., "BOSS: Blow Out Spool System", Fire Safety Engineering, Second International Conference, pages 235-248, BHRA, Cranfield, UK, 1989.
253. Institute of Electrical and Electronic Engineers (IEEE), IEEE 484, Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications, IEEE, 2002.
254. Institute of Electrical and Electronic Engineers (IEEE), IEEE 979, Guide for Substation Fire Protection, IEEE, 1994.
255. Littleton, J., "Proven Methods Thrive in Kuwait Well Control Success", Petroleum Engineer International, pages 31-37, January, 1992.
256. NFPA 37, Standard for the Installation and Use of Stationary Combustible Engines and Gas Turbines 2010, National Fire Protection Association (NFPA),, NFPA, Quincy, MA.
257. NFPA 45, Standard on Fire Protection for Laboratories Using Chemicals 2004, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
258. NFPA 69, Standard for Explosion Prevention Systems 2008, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
259. NFPA 110, Standard for Emergency and Standby Power Systems 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
260. NFPA 214, Water-Cooling Towers 2005, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
261. NFPA 850, Recommend Practice for Fire Protection for Electric Generating Plans and High Voltage Direct Current Converter Stations 2010, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
262. Patterson T. Offshore Fire Safety 1993, Penwell Publishing Company, Houston, TX.
263. Pederson K.S. STF88 A83012, Fire and Explosion Risks Offshore, The Risk Picture 1983, SINTEF, Tronheim, Norway.
264. XL Global Asset Protection Services (XL GAPS), GAP. 17.3.4, Crude Oil and Petroleum Products Storage Terminals, XL GAPS, Stamford, CT, 2003.
265. Z535.1, Safety Colors 2006, American National Standards Institute (ANSI), ANSI, New York, NY.
266. Z535.2, Environmental and Facility Safety Signs 2007, American National Standards Institute (ANSI), ANSI, New York, NY.
267. Standard 615, Sound Control of Mechanical Equipment for Refinery Services 1987, American Petroleum Institute (API), API, Washington, D.C.
268. A13.1, Scheme for the Identification of Piping Systems 2007, American Society of Mechanical Engineers (ASME),, ANSI, New York, NY.
269. Guidelines for Analyzing and Managing the Security Vulnerabilities of Fixed Chemical Sites 2002, Center for Chemical Process Safety, American Institute of Chemical Engineers (AIChE), New York, NY.
270. Guidelines for Preventing Human Error in Process Safety 1994, Center for Chemical Process Safety, American Institute of Chemical Engineers (AIChE), New York, NY.
271. RP 60.3, Human Engineering for Control Centers 1986, Instrument Society of America (ISA), ISA.
272. NFPA 79 Electrical Standard for Industrial Machinery 2007, National Fire Protection Association (NFPA), NFPA, Quincy, MA.
273. Nolan D.P. Loss Prevention and Safety Control: Terms and Definitions 2010, CRC Press, Boca Raton, FL.
274. Nolan D.P. Safety and Security Review for the Process Industries, Application of HAZOP, PHA and What-If Reviews 2008, William Andrew Applied Science Publishers, Norwich, NY. 2nd Edition.
275. Nolan, D. P., "Unsafe - What Does It Really Mean", Loss Control Newsletter, Saudi Aramco, Dhahran, Saudi Arabia, November, 2009.
276. People in Control: Human Factors in Control Room Design 2001, Institution of Engineering and Technology, London, UK. J. Noyes, N. Bransby (Eds.).
277. Occupational Safety and Health Administration (OSHA), U.S. Regulation 29 CFR 1919.144, Safety Color Code for Marking Physical Hazards, Department of Labor, OSHA, Washington, DC, 1992.
278. Perrow C. Normal Accidents: Living with High-Risk Technologies 1999, Princeton University Press, Princeton, NJ.
279. Handbook of Human Factors and Ergonomics 2006, John Wiley & Sons, Inc., Hoboken, NJ.
280. Stanton N.A., Salmon P., Jenkins D., Walker G.H. Human Factors in the Design and Evaluation of Central Control Room Operations 2009, CRC Press, Boca Raton, FL.