Pyridine-functionalized graphene/polyimide nanocomposites; mechanical, gas barrier, and catalytic effects

Composites Part B: Engineering

Volumn 114, Issue , 2017, Pages 280-288

  Lim, Jun ^a   Yeo, Hyeonuk ^a   Kim, Seo Gyun ^b   Park, Ok Kyung ^a   Yu, Jaesang ^a   Hwang, Jun Yeon ^a   Goh, Munju ^a   Ku, Bon Cheol ^a   Lee, Heon Sang ^b   You, Nam Ho ^a  

^a Korea Institute of Science and Technology   (South Korea)

^b Dong A University   (South Korea)

Author keywords

Mechanical properties; Nanocomposite; Oxygen barrier; Polyimide; Reduced graphene oxide

Indexed keywords

GRAPHENE; MECHANICAL PROPERTIES; NANOCOMPOSITES; OXYGEN; POLYIMIDES; PYRIDINE; SYNTHESIS (CHEMICAL); TENSILE STRENGTH;

CATALYTIC EFFECTS; FUNCTIONALIZATIONS; FUNCTIONALIZED; FUNCTIONALIZED GRAPHENE; IN-SITU POLYMERIZATION; OXYGEN BARRIER PROPERTIES; OXYGEN BARRIERS; REDUCED GRAPHENE OXIDES;

NANOCOMPOSITE FILMS;

EID: 85012980030     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2016.12.057     Document Type: Article

References (45)

1. [1] Liaw, D.J., Wang, K.L., Huang, Y.C., Lee, K.R., Lai, J.Y., Ha, C.S., Advanced polyimide materials: syntheses, physical properties and applications. Prog Polym Sci 37 (2012), 907–974.
2. [2] Higashihara, T., Ueda, M., Recent progress in high refractive index polymers. Macromolecules 48 (2015), 1915–1929.
3. [3] Yeo, H., Lee, J., Goh, M., Ku, B.-C., Sohn, H., Ueda, M., et al. Synthesis and characterization of high refractive index polyimides derived from 2,5-bis(4-aminophenylenesulfanyl)-3,4-ethylenedithiothiophene and aromatic dianhydrides. J Polym Sci Part A Polym Chem 53 (2015), 944–950.
4. [4] Yeo, H., Goh, M., Ku, B.-C., You, N.-H., Synthesis and Characterization of Highly-Fluorinated Colorless Polyimides Derived from 4,4'-((perfluoro-[1,1'-biphenyl]-4,4'-diyl)bis(oxy))bis(2,6-dimethylaniline) and Aromatic dianhydrides. Polymer 76 (2015), 280–286.
5. [5] Takizawa, K., Wakita, J., Sekiguchi, K., Ando, S., Variations in aggregation structures and fluorescence properties of a semialiphatic fluorinated polyimide induced by very high pressure. Macromolecules 45 (2012), 4764–4771.
6. [6] Jung, Y., Byun, S., Park, S., Lee, H., Polyimide–organosilicate hybrids with improved thermal and optical properties. ACS Appl Mater. Interfaces 6 (2014), 6054–6061.
7. [7] Ahmad, Z., Mark, J.E., Polyimide−Ceramic hybrid composites by the Sol−Gel route. Chem Mater 13 (2001), 3320–3330.
8. [8] Sung, D.H., Kang, G.H., Kong, K., Kim, M., Park, H.W., Park, Y.B., Characterization of thermoelectric properties of multifunctional multiscale composites and fiber-reinforced composites for thermal energy harvesting. Compos Part B 92 (2016), 202–209.
9. [9] Quaresimin, M., Bertani, R., Zappalorto, M., Pontefisso, A., Simionato, F., Bartolozzi, A., Multifunctional polymer nanocomposites with enhanced mechanical and anti-microbial properties. Compos Part B 80 (2015), 108–115.
10. [10] Sahoo, N.G., Rana, S., Cho, J.W., Li, L., Chan, S.H., Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci 35 (2010), 837–867.
11. 2–reduced graphene oxide/polyimide composite film for applications in electrocatalysis and photoelectrocatalysis hydrogen evolution. Adv Func Mater 25 (2015), 1814–1820.
12. [12] Yoonessi, M., Shi, Y., Scheiman, D.A., Lebron-Colon, M., Tigelaar, D.M., Weiss, R.A., et al. Graphene polyimide nanocomposites, thermal, mechanical, and high-temperature shape memory effects. ACS Nano 6 (2012), 7644–7655.
13. [13] Huang, T., Lu, R., Su, C., Wang, H., Guo, Z., Liu, P., et al. Chemically modified graphene/polyimide composite films based on utilization of covalent bonding and oriented distribution. ACS Appl Mater Interfaces 4 (2012), 2699–2708.
14. [14] Yuan, W., Che, J., Chan-Park, M.B., A novel polyimide dispersing matrix for highly electrically conductive solution-cast carbon nanotube-based composite. Chem Mater 23 (2011), 4149–4157.
15. [15] Stankovich, S., Dikin, D.A., Dommett, G.H., Kohlhaas, K.M., Zimney, E.J., Stach, E.A., et al. Graphene-based composite materials. Nature 442 (2006), 282–286.
16. [16] Lim, J., Yeo, H., Goh, M., Ku, B.-C., Kim, S.G., Lee, H.S., et al. Grafting of polyimide onto chemically-functionalized graphene nanosheets for mechanically-strong barrier membranes. Chem Mater 27 (2015), 2040–2047.
17. [17] Park, O.K., Hwang, J.Y., Goh, M., Lee, J.H., Ku, B.C., You, N.H., Mechanically strong and multifunctional polyimide nanocomposites using amimophenyl functionalized graphene nanosheets. Macromolecules 46 (2013), 3505–3511.
18. [18] Gabrion, X., Placet, V., Trivaudey, F., Boubakar, L., About the thermomechanical behaviour of a carbon fibre reinforced high-temperature thermoplastic composite. Compos Part B 95 (2016), 386–394.
19. [19] Xie, J.F., Yao, L., Xu, F.J., Li, Y.S., Shan, Z.D., Hui, D., et al. Fabrication and characterization of three-dimensional PMR polyimide composites reinforced with woven basalt fabric. Compos Part B 66 (2014), 268–275.
20. [20] Dreyer, D.R., Park, S., Bielawski, C.W., Ruoff, R.S., The chemistry of graphene oxide. Chem Soc Rev 39 (2010), 228–240.
21. [21] Novoselov, K.S., Fal, V.I., Colombo, L., Gellert, P.R., Schwab, M.G., Kim, K., A roadmap for graphene. Nature 490 (2012), 192–200.
22. [22] Bonaccorso, F., Sun, Z., Hasan, T., Ferrari, A.C., Graphene photonics and optoelectronics. Nat Photonics 4 (2010), 611–622.
23. [23] Xiang, C., Cox, P.J., Kukovecz, A., Genorio, B., Hashim, D.P., Yan, Z., et al. Functionalized Low Defect Graphene Nanoribbons and Polyurethane Composite Film for improved gas barrier and mechanical performances. ACS Nano 7 (2013), 10380–10386.
24. [24] Georgakilas, V., Tiwari, J.N., Kemp, K.C., Perman, J.A., Bourlinos, A.B., Kim, K.S., et al. Noncovalent functionalization of graphene and graphene oxide for energy materials, biosensing, catalytic, and biomedical applications. Chem Rev 116 (2016), 5464–5519.
25. [25] Chandrashekar, B.N., Deng, B., Smitha, A.S., Chen, Y., Tan, C., Zhang, H., et al. Adv Mater 27 (2015), 5210–5216.
26. [26] Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., et al. Roll-to-roll production of 30-inch graphene films for transparent electrodes. Nat Nanotech 5 (2010), 574–578.
27. [27] Stankovich, S., Dikin, D.A., Piner, R.D., Kohlhaas, K.A., Kleinhammes, A., Jia, Y., et al. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. Carbon 45 (2007), 1558–1565.
28. [28] Rauti, R., Lozano, N., León, V., Scaini, D., Musto, M., Rago, I., et al. Graphene oxide nanosheets reshape synaptic function in cultured brain networks. ACS Nano 10 (2016), 4459–4471.
29. [29] Sydlik, S.A., Jhunjhunwala, S., Webber, M.J., Anderson, D.G., Langer, R., In vivo compatibility of graphene oxide with differing oxidation states. ACS Nano 9 (2015), 3866–3874.
30. [30] Becerril, H.A., Mao, J., Liu, Z., Stoltenberg, R.M., Bao, Z., Chen, Y., Evaluation of solution-processed reduced graphene oxide films as transparent conductors. ACS Nano 2 (2008), 463–470.
31. [31] Ramanathan, T., Abdala, A., Stankovich, S., Dikin, D., Herrera-Alonso, M., Piner, R., et al. Functionalized graphene sheets for polymer nanocomposites. Nat Nanotech 3 (2008), 327–331.
32. [32] Georgakilas, V., Otyepka, M., Bourlinos, A.B., Chandra, V., Kim, N., Kemp, K.C., et al. Functionalization of graphene: covalent and non-covalent approaches, derivatives and applications. Chem Rev 112 (2012), 6156–6214.
33. [33] Kailani, M.H., Sung, C.S.P., Chemical imidization study by spectroscopic techniques. 2. Polyamic acids. Macromolecules 31 (1998), 5779–5784.
34. [34] Thomas, K., Jerchel, D., The introduction of substituents into the pyridine ring. Newer Methods Prep Org Chem, 1964, 53–109.
35. [35] Lai, L., Yang, H., Wang, L., Teh, B.K., Zhong, J., Chou, H., et al. Preparation of supercapacitor electrodes through selection of graphene surface functionalities. ACS Nano 6 (2012), 5941–5951.
36. 2-graphene from in situ graphene-oxide reduction and its improved electrochemical properties. Carbon 49 (2011), 3250–3257.
37. [37] Fang, M., Zhang, Z., Li, J., Zhang, H., Lu, H., Yang, Y., Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces. J Mater. Chem 20 (2010), 9635–9643.
38. [38] Snyder, R.W., Thomson, B., Bartges, B., Czerniawski, D., Painter, P.C., FTIR studies of polyimides: thermal curing. Macromolecules 22 (1989), 4166–4172.
39. [39] Fukukawa, K.-I., Shibasaki, Y., Ueda, M., Efficient catalyst for low temperature solid-phase imidization of poly(amic acid). Chem Lett 33 (2004), 1156–1157.
40. [40] Fukukawa, K.-I., Shibasaki, Y., Ueda, M., Direct patterning of poly(amic acid) and low temperature imidization using a photo-base generator. Polym Adv Technol 17 (2006), 131–136.
41. [41] Leung, M.-K., Fréchet, J.M.J., Amine catalyzed intramolecular imidization of alkyl and aryl phthalamates. Kinetics and mechanism in deuteriated chloroform. J Chem Soc PERKIN Trans 2 (1993), 2329–2335.
42. [42] Compton, O.C., Cranford, S.W., Putz, K.W., An, Z., Brinson, L.C., Buehler, M.J., et al. Tuning the mechanical properties of graphene oxide paper and its associated polymer nanocomposites by controlling cooperative intersheet hydrogen bonding. ACS Nano 6 (2012), 2008–2019.
43. [43] Liu, D., Bian, Q., Li, Y., Wang, Y., Xiang, A., Tian, H., Effect of oxidation degrees of graphene oxide on the structure and properties of poly (vinyl alcohol) composite films. Comp Sci Tech 129 (2016), 146–152.
44. [44] Hocker, S., Hudson-Smith, N., Schniepp, H.C., Kranbuehl, D.E., Enhancing Polyimide's water barrier properties through addition of functionalized graphene oxide. Polymer 93 (2016), 23–29.
45. [45] Kim, H.M., Lee, J.K., Lee, H.S., Transparent and high gas barrier films based on poly (vinyl alcohol)/graphene oxide composites. Thin Solid Films 519 (2011), 7766–7771.