A methodology for the definition of optimal control strategies of a VVT-equipped SI engine

SAE Technical Papers

Volumn 2001, Issue , 2001, Pages 1-10

  Bozza, F ^a   Cardone, M ^a   Gimelli, A ^a   Senatore, A ^a   Tuccillo, R ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CODES (SYMBOLS); EMISSION CONTROL; WAVE PROPAGATION; COMBUSTION;

CONTROL PARAMETERS; EXPERIMENTAL ANALYSIS; OPERATING CONDITION; OPTIMAL CONTROL STRATEGY; OPTIMIZATION PROCEDURES; VALVE OPENING; VARIABLE VALVE TIMING; WAVE PROPAGATION MODELS;

ENGINES; INTERNAL COMBUSTION ENGINES;

EID: 85007281179     PISSN: None     EISSN: 01487191     Source Type: Conference Proceeding    
DOI: 10.4271/2001-24-0054     Document Type: Conference Paper

References (37)

1. Gray C., "A Review of Variable Engine Valve Timing", SAE paper 880386.
2. Ahmad T., Theobald M. A., "A Survey of Variable-Valve-Actuation Technology", SAE paper 891674.
3. Moriya Y., Watanabe A., Uda H., Kawamura H., Yoshioka M., Adachi M., "A Newly Developed Intelligent Variable Valve Timing System - Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 Engine", SAE paper 960579, SAE Int. Congr. & Exp., Detroit, MI, USA., 1996.
4. Maekawa K., Ohsawa N., Akasaka A., "Development of a Valve Timing Control System", SAE 890680.
5. Grohn M., Wolf K., "Variable Valve Timing in the new Mercedes-Benz Four-Valve Engines", SAE 891990.
6. Fukuo K., Iwata T., Sakamoto Y., Imai Y., Nakahara K., Lantz K. A., "Honda 3.0 Liter, New V6 Engine", SAE paper 970916, SAE Int. Cong. & Exp., Detroit, MI, USA., February 24-27, 1997.
7. Hatano K., Lida K., Higashi H., Murata S., "Development of a New Multi-Mode Variable Valve Timing Engine", SAE paper 930878, SAE Int. Cong. & Exp., Detroit, MI, USA., March 1-5, 1993.
8. Tuttle J. H., "Controlling Engine Load by Means of Late Intake-Valve Closing", SAE 800794, 1980.
9. Urata Y., Umiyama H., Shimizu K., Fujiyoshi Y., Sono H., Fukuo K., "A Study of Vehicle Equipped with Non-Throttling S. I. Engine with Early Intake Valve Closing Mechanism", SAE paper 930820.
10. Theobald M. A., Lequesne B., Henry R., "Control of Engine Load via Electromagnetic Valve Actuators", SAE paper 940816.
11. Lee J. C., Lee C. W., Nitkiewicz J. A., "The Application of a Lost Motion VVT System to a DOHC SI Engine", SAE paper 950816, SAE Int. Cong. & Exp., Detroit, MI, USA., 1995.
12. Leone T. G., Christenson E. J. Stein, R. A., "Comparison of Variable Camshaft Timing Strategies at Part Load", SAE 960584, 1996.
13. Haugen D. J., Blackshear P. L., Pipho M. J., Esler W. J., "Modifications of a Quad 4 Engine to Permit Late Intake Valve Closure", SAE paper 921663, 1992
14. Lancefield T. M., Gayler R. J., Chattopadhay A., "The Practical Application and Effects of a Variable Event Valve Timing System", SAE paper 930825, SAE Int. Congr. & Exp., Detroit, MI, USA, 1993.
15. Vogel O., Roussopoulos K., Guzzella L., Czekaj J., "Variable Valve Timing Implemented with a Secondary Valve on a Four Cylinder SI Engine", SAE paper 970335, SAE Int. Cong. & Exp., Detroit, MI, USA., February 24-27, 1997.
16. Roepke K., Fischer M. "Efficient Layout and Calibration of Variable Valve Trains", SAE 2001-01-0668, 2001, also in " Variable Valve Actuation 2001", SAE SP-1599, ISBN 0-7680-0746-1.
17. F. Bozza, A. Gimelli, A. Senatore, A. Caraceni, "A Theoretical Comparison of Various VVA Systems for Performance and Emission Improvements of SI Engines", SAE Paper 2001-01-0671, 2001, also in "Variable Valve Actuation 2001", SAE SP-1599, ISBN 0-7680-0746-1.
18. Bozza F., Cameretti M. C., Tuccillo R., "Numerical Simulation of In-Cylinder Processes and Duct Flow in a Light-Duty Diesel Engine", Fourth International Symposium on Small Diesel Engines, Varsavia, 1996, in "Journal of POLISH CIMAC", Vol. 2, n. 1, pp. 51-66, 1996.
19. Bozza F., Senatore A., Tuccillo R., Gimelli A., "Caratterizzazione sperimentale e teorica del funzionamento di un motore diesel di concezione avanzata", Rivista ATA, 1997, pp. 117-129 (in Italian).
20. Bozza F., Cameretti M. C., Senatore A., Tuccillo R., "Experimental Investigation and Numerical Modelling of an Advanced Turbocharged D. I. Diesel Engine", SAE 970057, SAE Int. Congr. & Exp., Detroit, 1997, also in "Engine Modeling", SAE SP-1255, 1997.
21. Bozza F., Cameretti M. C., Senatore A., Tuccillo R., "A Flow and a Combustion Model for NOX Emission Evaluation in a Turbocharged Diesel Engine", proc. of 3rd Int. Conf. ICE97 Internal Combustion Engines: Experiments and Modeling, 1997, pp. 153-162.
22. Bozza F., Manna M., Pascarelli A., "Un approccio misto 0-D/1-D per la simulazione di M. C. I. a 2 tempi", 49° Congr. Naz. ATI, Perugia, sept. 1994, Vol. II, pp. 1835-1847, ed. SGE-Padova (in Italian).
23. Bozza F., Tuccillo R., de Falco D., "A Two-Stroke Engine Model Based on Advanced Simulation of Fundamental Processes", SAE paper 952139, SAE Int. Congr. & Exp., Milwaukee, WI, sett. 1995
24. also in "Design and Emissions of Small Two- and Four-Stroke Engines", SAE SP-1112, pp. 87-98, 1995.
25. Bozza F., Cameretti M. C., Tuccillo R., "Numerical Simulation of Transient Behaviour of an EGR Equipped Turbocharged Engine" proc. of 4th Int. Conf. ICE99 Internal Combustion Engines: Experiments and Modeling, 1999, pp. 313-320.
26. Bozza F., Senatore A., Tuccillo R., "An Integrated Numerical-Experimental Method for the Analysis of In-Cylinder Processes in an EGR Equipped Diesel Engine", proc. of 1999 Fall Technical Conference, Ann Arbor, Michigan, 1999.
27. Harten, A., "On a Class of High Resolution Total Variation Stable Finite Difference Schemes", Journal of Computational Physics, Vol. 21, 21-23, 1984.
28. Manna, M., "A Three Dimensional High Resolution Compressible Flow Solver", PhD Thesis, Catholic Univ. of Louvain - Von Karman Institute for Fluid Dynamics, 1992, also in TN 180, VKI, 1992.
29. Benson R. S., The thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. 1, Edited by Horlock J. H. and Winterbone D. E., Clarendon Press, Oxford (1982).
30. Winterbone D. E. and Pearson R. J., Design Techniques foe Engine Manifolds, Professional Engineering Publishing, 1999, ISBN 1 86058 179 X
31. Heywood J. B., Internal Combustion Engine Fundamentals, McGraw Hill, 1988.
32. Matthews, R. D., and Chin, Y. W., "A Fractal-Based SI Engine Model: Comparisons of Predictions with Experimental Data", SAE Paper 910075, 1991.
33. Poulos S. G., Heywood G. B., "The Effect of Chamber Geometry on Spark-Ignition Engine Combustion", SAE paper 830334, 1983.
34. Cheng W. K., Hamrin D., Heywood J. B., Hochgreb S., Min K., Norris M., "An Overview of Hydrocarbon Emission Mechanisms in Spark-Ignition Engines", SAE paper 932708, 1993.
35. Schramm J., Sorenson S. C., "A model for Hydrocarbon Emissions from SI Engines", SAE paper 902169, 1990.
36. Manna M, Tuccillo R., "The Combined Use of Navier-Stokes Solvers and Optimization Methods for Decelerating Cascade Design", ASME Paper 2000-GT-524, IGTI Congress, Munich, Germany, 2000
37. Gill P. H., Murray W., Wright M. H., Practical Optimization, ed. Academic Press, London, 1984