Non-isothermal two-phase transport in a polymer electrolyte membrane fuel cell with crack-free microporous layers

International Journal of Heat and Mass Transfer

Volumn 107, Issue , 2017, Pages 418-431

  Ge, Nan ^a   Chevalier, Stéphane ^a   Lee, Jongmin ^a   Yip, Ronnie ^a   Banerjee, Rupak ^a   George, Michael G ^a   Liu, Hang ^a   Lee, ChungHyuk ^a   Fazeli, Mohammadreza ^a   Antonacci, Patrick ^a   Kotaka, Toshikazu ^b   Tabuchi, Yuichiro ^b   Bazylak, Aimy ^a  

^a UNIVERSITY OF TORONTO   (Canada)

^b NISSAN MOTOR CO   (Japan)

Author keywords

Gas diffusion layer; Microporous layer; Polymer electrolyte membrane fuel cell; Synchrotron X ray radiography; Temperature distribution; Two phase transport

Indexed keywords

CATHODES; CRACKS; DIFFUSION IN GASES; ELECTRODES; ELECTROLYTES; FUEL CELLS; LIQUIDS; MICROPOROSITY; PHASE INTERFACES; POLYELECTROLYTES; POLYMERS; PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC); TEMPERATURE; TEMPERATURE DISTRIBUTION; THERMAL GRADIENTS; TWO PHASE FLOW; WATER SUPPLY SYSTEMS; X RAY RADIOGRAPHY;

CATHODE CATALYST LAYERS; GAS DIFFUSION LAYERS; HEAT AND MASS TRANSPORTS; LIQUID WATER DISTRIBUTIONS; MICROPOROUS LAYERS; POLYMER ELECTROLYTE MEMBRANES; SYNCHROTRON X-RAY RADIOGRAPHY; TWO-PHASE TRANSPORT;

SOLID ELECTROLYTES;

EID: 84997079162     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2016.11.045     Document Type: Article

References (80)

1. [1] D. Papageorgopoulos, Fuel Cells Program-Plenary Presentation, 2015.
2. [2] Kotaka, T., Tabuchi, Y., Mukherjee, P.P., Microstructural analysis of mass transport phenomena in gas diffusion media for high current density operation in PEM fuel cells. J. Power Sources 280 (2015), 231–239, 10.1016/j.jpowsour.2015.01.111.
3. [3] Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., et al. A review of water flooding issues in the proton exchange membrane fuel cell. J. Power Sources 178 (2008), 103–117, 10.1016/j.jpowsour.2007.12.068.
4. [4] Lee, J., Yip, R., Antonacci, P., Ge, N., Kotaka, T., Tabuchi, Y., et al. Synchrotron investigation of microporous layer thickness on liquid water distribution in a PEM fuel cell. J. Electrochem. Soc. 162 (2015), F669–F676, 10.1149/2.0221507jes.
5. [5] Lee, J., Hinebaugh, J., Bazylak, a., Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs. J. Power Sources 227 (2013), 123–130, 10.1016/j.jpowsour.2012.11.006.
6. [6] Nam, J.H., Lee, K.-J., Hwang, G.-S., Kim, C.-J., Kaviany, M., Microporous layer for water morphology control in PEMFC. Int. J. Heat Mass Transfer 52 (2009), 2779–2791, 10.1016/j.ijheatmasstransfer.2009.01.002.
7. [7] Ramasamy, R., Kumbur, E., Mench, M., Liu, W., Moore, D., Murthy, M., Investigation of macro- and micro-porous layer interaction in polymer electrolyte fuel cells. Int. J. Hydrogen Energy 33 (2008), 3351–3367, 10.1016/j.ijhydene.2008.03.053.
8. [8] Weber, A.Z., Newman, J., Effects of microporous layers in polymer electrolyte fuel cells. J. Electrochem. Soc., 152, 2005, A677, 10.1149/1.1861194.
9. [9] Qi, Z., Kaufman, A., Improvement of water management by a microporous sublayer for PEM fuel cells. J. Power Sources 109 (2002), 38–46, 10.1016/S0378-7753(02)00058-7.
10. [10] Pasaogullari, U., Wang, C.-Y., Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells. Electrochim. Acta 49 (2004), 4359–4369, 10.1016/j.electacta.2004.04.027.
11. [11] Kotaka, T., Tabuchi, Y., Pasaogullari, U., Wang, C.-Y., Impact of interfacial water transport in PEMFCs on cell performance. Electrochim. Acta 146 (2014), 618–629, 10.1016/j.electacta.2014.08.148.
12. [12] Antonacci, P., Chevalier, S., Lee, J., Ge, N., Hinebaugh, J., Yip, R., et al. Balancing mass transport resistance and membrane resistance when tailoring microporous layer thickness for polymer electrolyte membrane fuel cells operating at high current densities. Electrochim. Acta 188 (2016), 888–897, 10.1016/j.electacta.2015.11.115.
13. [13] Thomas, A., Maranzana, G., Didierjean, S., Dillet, J., Lottin, O., Thermal effect on water transport in proton exchange membrane fuel cell. Fuel Cells 12 (2012), 212–224, 10.1002/fuce.201100100.
14. [14] Gostick, J.T., Ioannidis, M.A., Fowler, M.W., Pritzker, M.D., On the role of the microporous layer in PEMFC operation. Electrochem. Commun. 11 (2009), 576–579, 10.1016/j.elecom.2008.12.053.
15. [15] Lu, Z., Daino, M.M., Rath, C., Kandlikar, S.G., Water management studies in PEM fuel cells, part III: Dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs. Int. J. Hydrogen Energy 35 (2010), 4222–4233, 10.1016/j.ijhydene.2010.01.012.
16. [16] Gostick, J.T., Fowler, M.W., Ioannidis, M.a., Pritzker, M.D., Volfkovich, Y.M., Sakars, a., Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells. J. Power Sources 156 (2006), 375–387, 10.1016/j.jpowsour.2005.05.086.
17. [17] Hinebaugh, J., Fishman, Z., Bazylak, a., Unstructured pore network modeling with heterogeneous PEMFC GDL porosity distributions. J. Electrochem. Soc., 157, 2010, B1651, 10.1149/1.3486095.
18. [18] Gostick, J.T., Ioannidis, M.a., Pritzker, M.D., Fowler, M.W., Impact of liquid water on reactant mass transfer in PEM fuel cell electrodes. J. Electrochem. Soc., 157, 2010, B563, 10.1149/1.3291977.
19. [19] Fazeli, M., Hinebaugh, J., Bazylak, a., Investigating inlet condition effects on PEMFC GDL liquid water transport through pore network modeling. J. Electrochem. Soc. 162 (2015), F661–F668, 10.1149/2.0191507jes.
20. [20] Gostick, J.T., Ioannidis, M.a., Fowler, M.W., Pritzker, M.D., Direct measurement of the capillary pressure characteristics of water–air–gas diffusion layer systems for PEM fuel cells. Electrochem. Commun. 10 (2008), 1520–1523, 10.1016/j.elecom.2008.08.008.
21. [21] Mench, M.M., Fuel Cell Engines. 2008, John Wiley & Sons, Hoboken, 310–322.
22. [22] Deevanhxay, P., Sasabe, T., Tsushima, S., Hirai, S., Observation of dynamic liquid water transport in the microporous layer and gas diffusion layer of an operating PEM fuel cell by high-resolution soft X-ray radiography. J. Power Sources 230 (2013), 38–43, 10.1016/j.jpowsour.2012.11.140.
23. [23] Markötter, H., Haußmann, J., Alink, R., Tötzke, C., Arlt, T., Klages, M., et al. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography. Electrochem. Commun. 34 (2013), 22–24, 10.1016/j.elecom.2013.04.006.
24. [24] Chun, J.H., Jo, D.H., Kim, S.G., Park, S.H., Lee, C.H., Kim, S.H., Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks. Renew. Energy 48 (2012), 35–41, 10.1016/j.renene.2012.04.011.
25. [25] She, H.Y., Sleep, B.E., The effect of temperature on capillary pressure-saturation relationships for air-water and perchloroethylene-water systems. Water Resour. Res., 34, 1998, 2587, 10.1029/98WR01199.
26. [26] Grant, S.A., Extension of a temperature effects model for capillary pressure saturation relations. Water Resour. Res., 39, 2003, 10.1029/2000WR000193 SBH 1–1–SBH 1–10.
27. [27] Kumbur, E.C., Sharp, K.V., Mench, M.M., On the effectiveness of Leverett approach for describing the water transport in fuel cell diffusion media. J. Power Sources 168 (2007), 356–368, 10.1016/j.jpowsour.2007.02.054.
28. [28] Park, S., Lee, J.W., Popov, B.N., Effect of PTFE content in microporous layer on water management in PEM fuel cells. J. Power Sources 177 (2008), 457–463, 10.1016/j.jpowsour.2007.11.055.
29. [29] Djilali, N., Lu, D., Influence of heat transfer on gas and water transport in fuel cells. Int. J. Therm. Sci. 41 (2002), 29–40, 10.1016/S1290-0729(01)01301-1.
30. [30] Weber, A.Z., Newman, J., Coupled thermal and water management in polymer electrolyte fuel cells. J. Electrochem. Soc., 153, 2006, A2205, 10.1149/1.2352039.
31. [31] Burheim, O.S., Su, H., Pasupathi, S., Pharoah, J.G., Pollet, B.G., Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell. Int. J. Hydrogen Energy 38 (2013), 8437–8447, 10.1016/j.ijhydene.2013.04.140.
32. [32] Thomas, A., Maranzana, G., Didierjean, S., Dillet, J., Lottin, O., Thermal and water transfer in PEMFCs: Investigating the role of the microporous layer. Int. J. Hydrogen Energy 39 (2014), 2649–2658, 10.1016/j.ijhydene.2013.11.105.
33. [33] Zamel, N., Becker, J., Wiegmann, A., Estimating the thermal conductivity and diffusion coefficient of the microporous layer of polymer electrolyte membrane fuel cells. J. Power Sources 207 (2012), 70–80, 10.1016/j.jpowsour.2012.02.003.
34. [34] Kandlikar, S.G., Microscale and macroscale aspects of water management challenges in PEM fuel cells. Heat Transfer Eng. 29 (2008), 575–587, 10.1080/01457630801922246.
35. [35] Kandlikar, S.G., Lu, Z., Thermal management issues in a PEMFC stack – A brief review of current status. Appl. Therm. Eng. 29 (2009), 1276–1280, 10.1016/j.applthermaleng.2008.05.009.
36. [36] Xu, G., Lamanna, J.M., Clement, J.T., Mench, M.M., Direct measurement of through-plane thermal conductivity of partially saturated fuel cell diffusion media. J. Power Sources 256 (2014), 212–219, 10.1016/j.jpowsour.2014.01.015.
37. [37] Owejan, J.P., Owejan, J.E., Gu, W., Trabold, T.a., Tighe, T.W., Mathias, M.F., Water transport mechanisms in PEMFC gas diffusion layers. J. Electrochem. Soc., 157, 2010, B1456, 10.1149/1.3468615.
38. [38] Tabuchi, Y., Shiomi, T., Aoki, O., Kubo, N., Shinohara, K., Effects of heat and water transport on the performance of polymer electrolyte membrane fuel cell under high current density operation. Electrochim. Acta. 56 (2010), 352–360, 10.1016/j.electacta.2010.08.070.
39. [39] Wang, Y., Basu, S., Wang, C., Modeling two-phase flow in PEM fuel cell channels. J. Power Sources 179 (2008), 603–617, 10.1016/j.jpowsour.2008.01.047.
40. [40] Basu, S., Wang, C.-Y., Chen, K.S., Two-phase flow maldistribution and mitigation in polymer electrolyte fuel cells. J. Fuel Cell Sci. Technol., 6, 2009, 031007, 10.1115/1.2971124.
41. [41] Wang, Y., Wang, C.-Y., Two-phase transients of polymer electrolyte fuel cells. J. Electrochem. Soc., 154, 2007, B636, 10.1149/1.2734076.
42. [42] Wang, Y., Wang, C., Nonisothermal, A., Two-phase model for polymer electrolyte fuel cells. J. Electrochem. Soc. 153 (2006), A1193–A1200, 10.1149/1.2193403.
43. [43] Banerjee, R., Hinebaugh, J., Liu, H., Yip, R., Ge, N., Bazylak, A., Heterogeneous porosity distributions of polymer electrolyte membrane fuel cell gas diffusion layer materials with rib-channel compression. Int. J. Hydrogen Energy 1 (2016), 0–11, 10.1016/j.ijhydene.2016.06.147.
44. [44] Fishman, Z., Hinebaugh, J., Bazylak, A., Microscale tomography investigations of heterogeneous porosity distributions of PEMFC GDLs. J. Electrochem. Soc., 157, 2010, B1643, 10.1149/1.3481443.
45. [45] Fishman, Z., Bazylak, a., Heterogeneous through-plane distributions of tortuosity, effective diffusivity, and permeability for PEMFC GDLs. J. Electrochem. Soc., 158, 2011, B247, 10.1149/1.3524284.
46. [46] Manke, I., Hartnig, C., Grünerbel, M., Lehnert, W., Kardjilov, N., Haibel, A., et al. Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography. Appl. Phys. Lett., 90, 2007, 174105, 10.1063/1.2731440.
47. [47] Hartnig, C., Manke, I., Kuhn, R., Kleinau, S., Goebbels, J., Banhart, J., High-resolution in-plane investigation of the water evolution and transport in PEM fuel cells. J. Power Sources 188 (2009), 468–474, 10.1016/j.jpowsour.2008.12.023.
48. [48] Markötter, H., Manke, I., Krüger, P., Arlt, T., Haussmann, J., Klages, M., et al. Investigation of 3D water transport paths in gas diffusion layers by combined in-situ synchrotron X-ray radiography and tomography. Electrochem. Commun. 13 (2011), 1001–1004, 10.1016/j.elecom.2011.06.023.
49. [49] Eller, J., Roth, J., Marone, F., Stampanoni, M., Wokaun, A., Büchi, F.N., Implications of polymer electrolyte fuel cell exposure to synchrotron radiation on gas diffusion layer water distribution. J. Power Sources 245 (2014), 796–800, 10.1016/j.jpowsour.2013.07.025.
50. [50] Haußmann, J., Markötter, H., Alink, R., Bauder, a., Dittmann, K., Manke, I., et al. Synchrotron radiography and tomography of water transport in perforated gas diffusion media. J. Power Sources 239 (2013), 611–622, 10.1016/j.jpowsour.2013.02.014.
51. [51] Büchi, F., Flückiger, R., Tehlar, D., Marone, F., Stampanoni, M., Determination of liquid water distribution in porous transport layers. Source 16 (2008), 587–592, 10.1149/1.2981893.
52. [52] Hinebaugh, J., Lee, J., Bazylak, a., Visualizing liquid water evolution in a PEM fuel cell using synchrotron X-ray radiography. J. Electrochem. Soc. 159 (2012), F826–F830, 10.1149/2.054212jes.
53. [53] Antonacci, P., Chevalier, S., Lee, J., Yip, R., Ge, N., Bazylak, A., Feasibility of combining electrochemical impedance spectroscopy and synchrotron X-ray radiography for determining the influence of liquid water on polymer electrolyte membrane fuel cell performance. Int. J. Hydrogen Energy 40 (2015), 16494–16502, 10.1016/j.ijhydene.2015.10.008.
54. [54] Thiedmann, R., Hartnig, C., Manke, I., Schmidt, V., Lehnert, W., Local structural characteristics of pore space in GDLs of PEM Fuel cells based on geometric 3D graphs. J. Electrochem. Soc., 156, 2009, B1339, 10.1149/1.3222737.
55. [55] Chevalier, S., Ge, N., Lee, J., Antonacci, P., Yip, R., George, M.G., et al. In situ analysis of voltage degradation in a polymer electrolyte membrane fuel cell with a dead-ended anode. Electrochem. Commun. 59 (2015), 16–19, 10.1016/j.elecom.2015.06.009.
56. [56] Ge, N., Chevalier, S., Hinebaugh, J., Yip, R., Lee, J., Antonacci, P., et al. Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts during in operando synchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cells. J. Synchrotron Radiat. 23 (2016), 590–599, 10.1107/S1600577515023899.
57. [57] Hinebaugh, J., Challa, P.R., Bazylak, a., Accounting for low-frequency synchrotron X-ray beam position fluctuations for dynamic visualizations. J. Synchrotron Radiat. 19 (2012), 994–1000, 10.1107/S0909049512039118.
58. [58] Wysokinski, T.W., Chapman, D., Adams, G., Renier, M., Suortti, P., Thomlinson, W., Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 1. Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 582 (2007), 73–76, 10.1016/j.nima.2007.08.087.
59. [59] Chevalier, S., Ge, N., Lee, J., Banerjee, R., Liu, H., George, M., et al. Synchrotron X-ray radiography as a highly precise and accurate method for measuring the spatial distribution of liquid water in operating PEM fuel cells. J. Electrochem. Soc., 2016 Accepted.
60. [60] George, M., Fishman, Z., Botelho, S., Bazylak, A., Micro-computed tomography-based profilometry for characterizing the surface roughness of microporous layer-coated polymer electrolyte membrane fuel cell gas diffusion layers. J. Electrochem. Soc. 163 (2016), F832–F841, 10.1149/2.0531608jes.
61. [61] Wargo, E.A., Kotaka, T., Tabuchi, Y., Kumbur, E.C., Comparison of focused ion beam versus nano-scale X-ray computed tomography for resolving 3-D microstructures of porous fuel cell materials. J. Power Sources 241 (2013), 608–618, 10.1016/j.jpowsour.2013.04.153.
62. [62] Owejan, J.P., Trabold, T.A., Mench, M.M., Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells. Int. J. Heat Mass Transfer 71 (2014), 585–592, 10.1016/j.ijheatmasstransfer.2013.12.059.
63. [63] Burheim, O.S., Su, H., Pasupathi, S., Pharoah, J.G., Pollet, B.G., Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell. Int. J. Hydrogen Energy 38 (2013), 8437–8447, 10.1016/j.ijhydene.2013.04.140.
64. [64] Burheim, O.S., Pharoah, J.G., Lampert, H., Vie, P.J.S., Kjelstrup, S., Through-plane thermal conductivity of PEMFC porous transport layers. J. Fuel Cell Sci. Technol., 8, 2011, 021013, 10.1115/1.4002403.
65. [65] Burheim, O., Vie, P.J.S., Pharoah, J.G., Kjelstrup, S., Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell. J. Power Sources 195 (2010), 249–256, 10.1016/j.jpowsour.2009.06.077.
66. [66] Burheim, O.S., Su, H., Hauge, H.H., Pasupathi, S., Pollet, B.G., Study of thermal conductivity of PEM fuel cell catalyst layers. Int. J. Hydrogen Energy 39 (2014), 9397–9408, 10.1016/j.ijhydene.2014.03.206.
67. [67] Kunusch, C., Puleston, P.F., Mayosky, M.a., Moré, J.J., Characterization and experimental results in PEM fuel cell electrical behaviour. Int. J. Hydrogen Energy 35 (2010), 5876–5881, 10.1016/j.ijhydene.2009.12.123.
68. [68] Springer, T.E., Zawodzinski, T.A., Gottesfeld, S., Polym. Electrolyte Fuel Cell Model 138 (1991), 2334–2342, 10.1149/1.2085971.
69. [69] Wang, C.Y., Fundamental models for fuel cell engineering. Chem. Rev. 104 (2004), 4727–4765, 10.1021/cr020718s.
70. [70] Wang, Y., Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells. J. Power Sources 185 (2008), 261–271, 10.1016/j.jpowsour.2008.07.007.
71. [71] Chevalier, S., Lee, J., Ge, N., Yip, R., Antonacci, P., Tabuchi, Y., et al. In operando measurements of liquid water saturation distributions and effective diffusivities of polymer electrolyte membrane fuel cell gas diffusion layers. Electrochim. Acta. 210 (2016), 792–803, 10.1016/j.electacta.2016.05.180.
72. [72] Zhang, X., Gao, Y., Ostadi, H., Jiang, K., Chen, R., Modelling water intrusion and oxygen diffusion in a reconstructed microporous layer of PEM fuel cells. Int. J. Hydrogen Energy 39 (2014), 17222–17230, 10.1016/j.ijhydene.2014.08.027.
73. [73] Cengel, Y.A., Ghajar, A.J., Heat and Mass Transfer: Fundamentals and Application. fourth ed., 2011, The McGraw-Hill Companies Inc, New York, 799–805.
74. [74] He, W., Yi, J.S., Nguyen, T.V., Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields. AIChE J. 46 (2000), 2053–2064, 10.1002/aic.690461016.
75. [75] Zawodzinski, T.A., Davey, J., Valerio, J., Gottesfeld, S., The water content dependence of electro-osmotic drag in proton-conducting polymer electrolytes. Electrochim. Acta 40 (1995), 297–302, 10.1016/0013-4686(94)00277-8.
76. [76] Motupally, S., Becker, A.J., Weidner, J.W., Diffusion of water in nafion 115 membranes. J. Electrochem. Soc., 147, 2000, 3171, 10.1149/1.1393879.
77. [77] Osman, M.H., Shah, a.a., Wills, R.G.a., Walsh, F.C., Mathematical modelling of an enzymatic fuel cell with an air-breathing cathode. Electrochim. Acta 112 (2013), 386–393, 10.1016/j.electacta.2013.08.044.
78. [78] Ji, Y., Luo, G., Wang, C.-Y., Pore-level liquid water transport through composite diffusion media of PEMFC. J. Electrochem. Soc., 157, 2010, B1753, 10.1149/1.3491359.
79. [79] Fox, H., Zisman, W., The spreading of liquids on low energy surfaces. I. Polytetrafluoroethylene. J. Colloid Sci. 5 (1950), 514–531, 10.1016/0095-8522(50)90044-4.
80. [80] Vargaftik, N.B., Volkov, B.N., Voljak, L.D., International tables of the surface tension of water. J. Phys. Chem. Ref. Data. 12 (1983), 817–820, 10.1063/1.555688.