Natural gas steam reforming reaction at low temperature and pressure conditions for hydrogen production via Pd/PSS membrane reactor

Journal of Membrane Science

Volumn 522, Issue , 2017, Pages 343-350

  Anzelmo, Bryce ^a   Wilcox, Jennifer ^a   Liguori, Simona ^a  

^a STANFORD UNIVERSITY   (United States)

Author keywords

Composite membrane; Hydrogen; Membrane reactor; Natural gas reforming; Palladium

Indexed keywords

BIOREACTORS; CARBON; CARBON DIOXIDE; COMPOSITE MEMBRANES; ELECTROLESS PLATING; FLOW OF GASES; GASES; HYDROGEN; HYDROGEN PRODUCTION; LOW TEMPERATURE PRODUCTION; MEMBRANES; NATURAL GAS; PALLADIUM; REFORMING REACTIONS; STAINLESS STEEL; STEAM; TEMPERATURE;

CONVENTIONAL REACTORS; GAS HOURLY SPACE VELOCITIES; MEMBRANE REACTOR; NATURAL GAS REFORMING; NATURAL-GAS STEAM REFORMING; PALLADIUM-BASED MEMBRANE; POROUS STAINLESS STEEL SUPPORTS; TRANSMEMBRANE PRESSURES;

STEAM REFORMING;

CARBON DIOXIDE; HYDROGEN; NATURAL GAS; NICKEL; PALLADIUM; STAINLESS STEEL;

ARTICLE; CATALYST; DIFFUSION; FLOW RATE; HEATING; HYPOBARISM; LOW TEMPERATURE; MEASUREMENT; MEMBRANE REACTOR; NUCLEAR MAGNETIC RESONANCE; POROSITY; PRIORITY JOURNAL; SURFACE PROPERTY; VELOCITY; WATER VAPOR;

EID: 84991338295     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2016.09.029     Document Type: Article

References (70)

1. [1] U. EIA, Annual Energy Outlook 2015: With Projections to 2040, United States Energy Information Administration, Washington, 2015.
2. [2] O. Edenhofer, R. Pichs-Madruga, Y. Sokona, E. Farahani, S. Kadner, K. Seyboth, IPCC, 2014: Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, Transport, 2014.
3. 2 emissions after the 2008–2009 global financial crisis. Nat. Clim. Change 2 (2012), 2–4.
4. 2 emissions, in: Proceedings of the National Academy of Sciences, 104, 2007, pp. 10288–10293.
5. [5] Mazloomi, K., Gomes, C., Hydrogen as an energy carrier: prospects and challenges. Renew. Sustain. Energy Rev. 16 (2012), 3024–3033.
6. [6] Tremel, A., Wasserscheid, P., Baldauf, M., Hammer, T., Techno-economic analysis for the synthesis of liquid and gaseous fuels based on hydrogen production via electrolysis. Int. J. Hydrog. Energy 40 (2015), 11457–11464.
7. [7] Naterer, G.F., Suppiah, S., Stolberg, L., Lewis, M., Ahmed, S., Wang, Z., Rosen, M.A., Dincer, I., Gabriel, K., Secnik, E., Easton, E.B., Lvov, S.N., Papangelakis, V., Odukoya, A., Progress of international program on hydrogen production with the copper–chlorine cycle. Int. J. Hydrog. Energy 39 (2014), 2431–2445.
8. [8] Acar, C., Dincer, I., Comparative assessment of hydrogen production methods from renewable and non-renewable sources. Int. J. Hydrog. Energy 39 (2014), 1–12.
9. [9] Iulianelli, A., Liguori, S., Pinacci, P., Morrone, P., Basile, A., Inorganic membrane reactor for hydrogen production through bio-ethanol reforming processes, ethanol: production, cellular mechanisms and health impact. Nova Sci. Publ., 2012, 79–102.
10. [10] Abbas, H.F., Wan Daud, W.M.A., Hydrogen production by methane decomposition: a review. Int. J. Hydrog. Energy 35 (2010), 1160–1190.
11. [11] Rostrup-Nielsen, J.R., Rostrup-Nielsen, T., Large-scale hydrogen production. Cattech 6 (2002), 150–159.
12. [12] Rostrup-Nielsen, J.R., Catalytic Steam Reforming, 1984, Springer, German.
13. [13] Oertel, M., Schmitz, J., Weirich, W., Jendryssek‐Neumann, D., Schulten, R., Steam reforming of natural gas with intergrated hydrogen separation for hydrogen production. Chem. Eng. Technol. 10 (1987), 248–255.
14. [14] Matsumura, Y., Nakamori, T., Steam reforming of methane over nickel catalysts at low reaction temperature. Appl. Catal. A: Gen. 258 (2004), 107–114.
15. [15] Jørgensen, S.L., Nielsen, P.H., Lehrmann, P., Steam reforming of methane in a membrane reactor. Catal. Today 25 (1995), 303–307.
16. [16] Kikuchi, E., Membrane reactor application to hydrogen production. Catal. Today 56 (2000), 97–101.
17. [17] Gryaznov, V., Hydrogen permeable palladium membrane catalysts. Platin. Met. Rev. 30 (1986), 68–72.
18. [18] Itoh, N., A membrane reactor using palladium. AIChE J. 33 (1987), 1576–1578.
19. [19] Graham, T., On the absorption and dialytic separation of gases by colloid septa. Philos. Trans. R. Soc. Lond. 156 (1866), 399–439.
20. [20] Barrer, R.M., Stationary and non-stationary states of flow of hydrogen in palladium and iron. Trans. Faraday Soc. 36 (1940), 1235–1248.
21. [21] Schramm, O., Seidel-Morgenstern, A., Comparing porous and dense membranes for the application in membrane reactors. Chem. Eng. Sci. 54 (1999), 1447–1453.
22. [22] Paglieri, S., Way, J., Innovations in palladium membrane research,. Sep. Purif. Rev. 31 (2002), 1–169.
23. [23] Hurlbert, R., Konecny, J., Diffusion of hydrogen through palladium. J. Chem. Phys. 34 (1961), 655–658.
24. [24] Silberg, P., Bachman, C., Diffusion of hydrogen in palladium. J. Chem. Phys. 29 (1958), 777–781.
25. [25] Tosti, S., Bettinali, L., Violante, V., Rolled thin Pd and Pd–Ag membranes for hydrogen separation and production. Int. J. Hydrog. Energy 25 (2000), 319–325.
26. [26] Shu, J., Grandjean, B., Ghali, E., Kaliaguine, S., Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating. J. Membr. Sci. 77 (1993), 181–195.
27. [27] Mardilovich, P.P., She, Y., Ma, Y.H., Rei, M.-H., Defect-free palladium membranes on porous stainless-steel support, American Institute of Chemical Engineers. AIChE J., 44, 1998, 310.
28. [28] Gade, S.K., Thoen, P.M., Way, J.D., Unsupported palladium alloy foil membranes fabricated by electroless plating. J. Membr. Sci. 316 (2008), 112–118.
29. [29] Catalano, J., Guazzone, F., Mardilovich, I.P., Kazantzis, N.K., Ma, Y.H., Hydrogen production in a large scale water–gas shift Pd-based catalytic membrane reactor. Ind. Eng. Chem. Res. 52 (2012), 1042–1055.
30. [30] Kikuchi, E., Membrane reactor application to hydrogen production. Catal. Today 56 (2000), 97–101.
31. [31] Di Marcoberardino, G., Sosio, F., Manzolini, G., Campanari, S., Fixed bed membrane reactor for hydrogen production from steam methane reforming: experimental and modeling approach. Int. J. Hydrog. Energy 40 (2015), 7559–7567.
32. [32] Masuda, H., Nishio, K., Baba, N., Preparation of microporous metal membrane using two-step replication of interconnected structure of porous glass. J. Mater. Sci. Lett. 13 (1994), 338–340.
33. [33] Soria, R., Overview on industrial membranes. Catal. Today 25 (1995), 285–290.
34. [34] Yeung, K.L., Sebastian, J., Varma, A., Novel preparation of Pd/Vycor composite membranes. Catal. Today 25 (1995), 231–236.
35. [35] Ma, Y.H., Mardilovich, I.P., Engwall, E.E., Thin composite palladium and palladium/alloy membranes for hydrogen separation. Ann. New Y. Acad. Sci. 984 (2003), 346–360.
36. [36] Edlund, D.J., McCarthy, J., The relationship between intermetallic diffusion and flux decline in composite-metal membranes: implications for achieving long membrane lifetime. J. Membr. Sci. 107 (1995), 147–153.
37. [37] Ma, Y.H., Akis, B.C., Ayturk, M.E., Guazzone, F., Engwall, E.E., Mardilovich, I.P., Characterization of intermetallic diffusion barrier and alloy formation for Pd/Cu and Pd/Ag porous stainless steel composite membranes. Ind. Eng. Chem. Res. 43 (2004), 2936–2945.
38. [38] Shu, J., Adnot, A., Grandjean, B., Kaliaguine, S., Structurally stable composite Pd-Ag alloy membranes: introduction of a diffusion barrier. Thin Solid Films 286 (1996), 72–79.
39. 2 modified porous stainless steel. J. Membr. Sci. 265 (2005), 142–152.
40. [40] Kikuchi, E., Uemiya, S., Matsuda, T., Hydrogen production from methane steam reforming assisted by use of membrane reactor. Stud. Surf. Sci. Catal. 61 (1991), 509–515.
41. [41] Liu, Z.-W., Jun, K.-W., Roh, H.-S., Park, S.-E., Hydrogen production for fuel cells through methane reforming at low temperatures. J. Power Sources 111 (2002), 283–287.
42. [42] Schädel, B.T., Duisberg, M., Deutschmann, O., Steam reforming of methane, ethane, propane, butane, and natural gas over a rhodium-based catalyst. Catal. Today 142 (2009), 42–51.
43. 2 capture. Chem. Eng. Process.: Process Intensif. 43 (2004), 1129–1158.
44. 2 capture systems. Int. J. Greenh. Gas. Control 40 (2015), 126–166.
45. 2 capture. Energy Convers. Manag. 60 (2012), 196–203.
46. 2 catalyst. Catal. Today 207 (2013), 28–35.
47. [47] El Hawa, H.W.A., Paglieri, S.N., Morris, C.C., Harale, A., Way, J.D., Application of a Pd–Ru composite membrane to hydrogen production in a high temperature membrane reactor. Sep. Purif. Technol. 147 (2015), 388–397.
48. [48] Nam, S.W., Yoon, S.P., Ha, H.Y., Hong, S.-A., Maganyuk, A.P., Methane steam reforming in a Pd-Ru membrane reactor. Korean J. Chem. Eng. 17 (2000), 288–291.
49. [49] Tong, J., Matsumura, Y., Suda, H., Haraya, K., Experimental study of steam reforming of methane in a thin (6 µm) Pd-based membrane reactor. Ind. Eng. Chem. Res. 44 (2005), 1454–1465.
50. [50] Uemiya, S., Sato, N., Ando, H., Matsuda, T., Kikuchi, E., Steam reforming of methane in a hydrogen-permeable membrane reactor. Appl. Catal. 67 (1990), 223–230.
51. [51] Nazarkina, E., Kirichenko, N., Improvement in steam catalytic conversion of methane by removing hydrogen through palladium membranes. Chem. Technol. Fuels Oils 15 (1979), 160–163.
52. 4. Chem. Eng. Res. Des. 84 (2006), 399–404.
53. [53] Gallucci, F., Paturzo, L., Famà, A., Basile, A., Experimental study of the methane steam reforming reaction in a dense Pd/Ag membrane reactor. Ind. Eng. Chem. Res. 43 (2004), 928–933.
54. [54] Lin, Y.-M., Liu, S.-L., Chuang, C.-H., Chu, Y.-T., Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: experimental and modeling. Catal. Today 82 (2003), 127–139.
55. [55] Shu, J., Grandjean, B.P.A., Kaliaguine, S., Methane steam reforming in asymmetric Pd-and Pd-Ag/porous SS membrane reactors. Appl. Catal. A: Gen. 119 (1994), 305–325.
56. [56] Y.H. Ma, I.P. Mardilovich, E.E. Engwall, Composite gas separation modules having high Tamman temperature intermediate layers, in: Google Patents, 2007.
57. [57] Y.H. Ma, I.P. Mardilovich, Composite structures with porous anodic oxide layers and methods of fabrication, in: Google Patents, 2013.
58. [58] Y.H. Ma, P.P. Mardilovich, Y. She, Hydrogen gas-extraction module and method of fabrication, in: Google Patents, 2000.
59. [59] I.M. Yi, Hua Ma, Pernsonal Communication on the Experimental Use of Pd Composite Membranes, 2014.
60. [60] Saxberg, B.E., Kowalski, B.R., Generalized standard addition method. Anal. Chem. 51 (1979), 1031–1038.
61. 3 membranes for hydrogen separation. Membranes 4 (2014), 143–162.
62. [62] Rothenberger, K.S., Cugini, A.V., Howard, B.H., Killmeyer, R.P., Ciocco, M.V., Morreale, B.D., Enick, R.M., Bustamante, F., Mardilovich, I.P., Ma, Y.H., High pressure hydrogen permeance of porous stainless steel coated with a thin palladium film via electroless plating. J. Membr. Sci. 244 (2004), 55–68.
63. [63] Guazzone, F., Engwall, E.E., Ma, Y.H., Effects of surface activity, defects and mass transfer on hydrogen permeance and n-value in composite palladium-porous stainless steel membranes. Catal. Today 118 (2006), 24–31.
64. [64] Sanz, R., Calles, J., Alique, D., Furones, L., New synthesis method of Pd membranes over tubular PSS supports via “pore-plating” for hydrogen separation processes. Int. J. Hydrog. Energy 37 (2012), 18476–18485.
65. [65] Chen, W.-H., Hsu, P.-C., Hydrogen permeation measurements of Pd and Pd–Cu membranes using dynamic pressure difference method. Int. J. Hydrog. Energy 36 (2011), 9355–9366.
66. [66] N.G. Processing, The Crucial Link Between Natural Gas Production and Its Transportation to Market, Energy Information Administration, Office of Oil and Gas, 2006, pp. 1–11.
67. 2 from natural gas: a review of conventional and emerging process technologies. J. Pet. Sci. Eng. 94–95 (2012), 123–154.
68. [68] Kumpmann, A., Günther, B., Kunze, H.D., Thermal stability of ultrafine-grained metals and alloys. Mater. Sci. Eng.: A 168 (1993), 165–169.
69. [69] Bryden, K.J., Ying, J.Y., Nanostructured palladium membrane synthesis by magnetron sputtering. Mater. Sci. Eng.: A 204 (1995), 140–145.
70. [70] Divisek, J., Oetjen, H.-F., Peinecke, V., Schmidt, V., Stimming, U., Components for PEM fuel cell systems using hydrogen and CO containing fuels. Electrochim. Acta 43 (1998), 3811–3815.