An approach to characterization and after-treatment of particulate emissions from gasoline engines

International Journal of Engine Research

Volumn 1, Issue 4, 2000, Pages 291-300

  Bouris, D ^a   Crane, R I ^a   Evans, J M ^b   Tippayawong, N ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b JOHNSON MATTHEY TECHNOLOGY CENTRE   (United Kingdom)

Author keywords

after treatment; catalysts; experimental simulation; gasoline engines; numerical modeling; particulates

Indexed keywords

EID: 84990385324     PISSN: 14680874     EISSN: 20413149     Source Type: Journal    
DOI: 10.1243/1468087001545191     Document Type: Article

References (41)

1. COMEAP. Quantification of the effects of air pollution on health in the United Kingdom. Department of Health Committee on Medical Effects of Air Pollution, The Stationary Office, 1998.
2. Pope C. A. Dockery D. W. Schwartz J. Review of epidemiological evidence of health effects of particulate air pollution. Inhal. Toxicol. 1995, 7, 1-18.
3. HEI. Program summary: Research on particulate matter. Health Effects Institute, Cambridge, Massachusetts, May 1999 (available in PDF format at http://www.healtheffects.org).
4. Hall D. E. King D. J. Morgan T. B. D. Baverstock S. J. A review of recent literature investigating the measurement of automotive particulate; the relationship with environmental aerosol, air quality and health effects. SAE Paper 982602, 1998.
5. Harrison R. M. Airborne particulate matter in the United Kingdom. 3rd Report of Quality of Urban Air Review Group, UK Department of the Environment, 1996.
6. Hall D. E. Goodfellow C. L. Heinze P. Rickeard D. J. A study of the size, number and mass distribution of the automotive particulate emisions from European light-duty vehicles. SAE Paper 982600, 1998.
7. Adersson J. Gasoline direct-injection (GDI) particle size analyses. In 2nd Annual Vehicle Particulate Emissions Meeting, Department of Engineering, University of Cambridge, 9 April 1999.
8. Gertler A. Real-world measurements of diesel particulate matter. In US EPA CAAAC Mobile Sources Technical Review Subcommittee Meeting, Washington, DC, 13 October 1999; http://transaq.ce.gatech.edu:80/epatec/documents/gertler.pdf (accessed May 2000).
9. Rickeard D. J. Bateman J. R. Kwon Y. K. McAughey J. J. Dickens C. J. Exhaust particle size distribution: Vehicle and fuel influences in light duty vehicles. SAE Paper 961980, 1996.
10. Greenwood S. J. Coxon J. E. Biddulph T. Bennett J. An investigation to determine the exhaust particle size distributions for diesel, petrol and compressed natural gas fuelled vehicles. SAE Paper 961185, 1996.
11. Abdul-Khalek I. S. Kittelson D. B. Real-time measurement of volatile and solid exhaust particles using a catalytic stripper. SAE Paper 950236, 1995.
12. Maricq M. M. Podsiadlik D. H. Chase R. E. Gasoline vehicle particle size distributions: Comparison of steady state, FTP and US06 measurements. Environ. Sci. Technol. 1999, 33, 2007-2016.
13. Maricq M. M. Podsiadlik D. H. Chase R. E. Examination of the size-resolved and transient nature of motor vehicle emissions. Environ. Sci. Technol. 1999, 33, 1718-1726.
14. Siegl W. O. Zinbo M. Korniski T. J. Rickaert J. F. O. Air toxics: A comparison of the gas and particle phase emissions from a high emitter vehicle with those from a normal emitter vehicle. SAE Paper 940581, 1994.
15. Graskow B. R. Kittelson D. B. Ahmadi M. R. Morris J. E. Exhaust particulate emissions from a direct injection spark ignition engine. SAE Paper 1999-01-1145, 1999.
16. Kittelson D. B. Engines and nanoparticles: A review. J. Aerosol Sci. 1998, 29, 575-588.
17. Kayes D. Hochgreb S. Investigation of the dilution process for measurement of particulate matter from spark-ignition engines. SAE Paper 982601, 1998.
18. Graskow B. R. Kittelson D. B. Ahmadi M. R. Morris J. E. Exhaust particulate emissions from two port fuel injected spark ignition engines. SAE Paper 1999-01-1144, 1999.
19. Kayes D. Hochgreb S. Mechanisms of particulate matter formation in spark-ignition engines: (2) effect of fuel, oil and catalyst parameters. Environ. Sci. Technol. 1999, 33, 3968-3977.
20. Kayes D. Hochgreb S. Mechanisms of particulate matter formation in spark-ignition engines: (1) effect of engine operating conditions. Environ. Sci. Technol. 1999, 33, 3957-3967.
21. van Setten B. A. A. L. van Dijk S. J. Jelles S. J. Makkee M. Moulijn J. A. The potential of supported molten salts in the removal of soot from diesel exhaust gas. Appl. Catalysis B: Environ. 1999, 21, 51-61.
22. Zinbo M. Korniski T. J. Weir J. E. Relationship between the composition of engine particulate emissions and emission control system. Ind. Engng Chem. Res. 1995, 34, 619-625.
23. Cadle S. H. Mulawa P. A. Nelson K. Ragazzi R. A. Composition of light-duty motor vehicle exhaust particulate matter in the Denver, Colorado area. Environ. Sci. Technol. 1999, 33, 2328-2339.
24. Andrews G. E. Ahamed F. M. The composition of spark-ignition engine steady-state particulate emissions. SAE Paper 1999-01-1143, 1999.
25. Helsper C. Mölter W. Löffler F. Wadenpohl C. Investigations on a new aerosol generator for the production of carbon aggregate particles. Atmos. Environment, Part A 1993, 27, 1271-1275.
26. Arcoumanis C. Nagwaney A. Hentschel W. Röpke S. Effect of EGR on spray development, combustion and emissions in a 1.9L direct-injection diesel engine. SAE Paper 952356, 1995.
27. Wang S. C. Flagan R. C. Scanning electrical mobility spectrometer. Aerosol Sci. Technol. 1990, 13, 230-240.
28. Dickens C. J. Ball M. H. E. Booker D. Donald J. R. Evaluation of instruments for vehicle emission particle sizing. Report AEAT-1180, AEA Technology, Harwell, 1997.
29. Hinds W. C. Aerosol Technology, 1982 (John Wiley, New York).
30. Berger C. Horvath H. Schindler W. The deposition of soot particles from hot gas streams through pipes. J. Aerosol Sci. 1995, 26, 211-217.
31. Wood N. B. A simple method for the calculation of turbulent deposition to smooth and rough surfaces. J. Aerosol Sci. 1981, 12, 275-290.
32. Talbot L. Thermophoresis—a review. In Proceedings of 12th AIAA International Symposium on Rarefied Gas Dynamics, 1980, pp. 467-488 (American Institute of Aeronautics and Astronautics).
33. Cleaver J. W. Yates B. Mechanism of detachment of colloidal particles from a flat substrate in a turbulent flow. Chem. Engng Sci. 1975, 30, 983-992.
34. Abu-Qudais M. Kittelson D. B. Experimental and theoretical study of particulate re-entrainment from the combustion chamber walls of a diesel engine. Proc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering 1997, 211(D1), 49-57.
35. Johnson J. E. Kittelson D. B. Deposition, diffusion and adsorption in the diesel oxidation catalyst. Appl. Catalysis B: Environ. 1996, 10, 117-137.
36. Burry D. Bergeles G. Dispersion of particles in anisotropic turbulent flows. Int. J. Multiphase Flow 1993, 19, 651-664.
37. Li A. Ahmadi G. Dispersion and deposition of spherical particles from point sources in a turbulent channel flow. Aerosol Sci. Technol. 1992, 16, 209-226.
38. Crowe C. Sommerfeld M. Tsuji Y. Multiphase Flows with Droplets and Particles, 1998 (CRC Press, Boca Raton, Florida).
39. Bouris D. Bergeles G. Particle-surface interactions in heat exchange fouling. Trans. ASME, J. Fluids Engng 1996, 118, 574-581.
40. Bouris D. Arcoumanis C. Bergeles G. Numerical investigation of thermophoretic and electrostatic particulate deposition efficiency in automotive vehicle exhaust pipes. In IMechE International Conference on 21st Century Emissions Technology, London, 4-6 December 2000.
41. Razinsky E. Brighton J. Confined jet mixing for nonseparating conditions. Trans. ASME, J. Basic Engng 1971, 93, 333-349.