An overview of engine durability and compatibility using biodiesel–bioethanol–diesel blends in compression-ignition engines

Energy Conversion and Management

Volumn 128, Issue , 2016, Pages 66-81

  Dharma, S ^a,b   Ong, Hwai Chyuan ^a   Masjuki, H H ^a   Sebayang, A H ^a,b   Silitonga, A S ^a,b  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b Politeknik Negeri Medan   (Indonesia)

Author keywords

Alternative fuels; Biodiesel; Bioethanol; Durability; Emissions; Performance

Indexed keywords

AGRICULTURE; ALTERNATIVE FUELS; BIODIESEL; BIOFUELS; DIESEL ENGINES; DURABILITY; ENERGY POLICY; ENERGY SECURITY; ENGINES; ETHANOL; EVAPORATIVE COOLING SYSTEMS; FOSSIL FUELS; FUELS; OILS AND FATS; PARTICULATE EMISSIONS; PETROLEUM DEPOSITS; RENEWABLE ENERGY RESOURCES; WASTE INCINERATION;

AGRICULTURAL ECONOMY; COMPRESSION IGNITION; COMPRESSION IGNITION ENGINE; PERFORMANCE; PHYSICOCHEMICAL PROPERTY; RENEWABLE ENERGY SOURCE; RESEARCH AND DEVELOPMENT; TRANSPORTATION SECTOR;

BIOETHANOL;

EID: 84988735456     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2016.08.072     Document Type: Review

References (206)

1. [1] Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T., Masjuki, H., Mekhilef, S., A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renew Sust Energ Rev 16 (2012), 2070–2093.
2. [2] Dhar, A., Agarwal, A.K., Effect of Karanja biodiesel blend on engine wear in a diesel engine. Fuel 134 (2014), 81–89.
3. [3] Lama-Munoz, A., Alvarez-Mateos, P., Rodríguez-Gutiérrez, G., Durán-Barrantes, M.M., Fernández-Bolaños, J., Biodiesel production from olive–pomace oil of steam-treated alperujo. Biomass Bioenerg 67 (2014), 443–450.
4. [4] Alicke, A.A., Leopércio, B.C., Marchesini, F.H., de Souza Mendes, P.R., Guidelines for the rheological characterization of biodiesel. Fuel 140 (2015), 446–452.
5. [5] Silitonga, A.S., Masjuki, H.H., Ong, H.C., Yusaf, T., Kusumo, F., Mahlia, T.M.I., Synthesis and optimization of Hevea brasiliensis and Ricinus communis as feedstock for biodiesel production: a comparative study. Ind Crop Prod 85 (2016), 274–286.
6. [6] Abubakar, U., Sriramula, S., Renton, N.C., Stochastic techno-economic considerations in biodiesel production. Sust Energ Technol Assess 9 (2015), 1–11.
7. [7] Atabani, A.E., Mahlia, T.M.I., Masjuki, H.H., Badruddin, I.A., Yussof, H.W., Chong, W.T., et al. A comparative evaluation of physical and chemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy 58 (2013), 296–304.
8. [8] Tinprabath, P., Hespel, C., Chanchaona, S., Foucher, F., Influence of biodiesel and diesel fuel blends on the injection rate under cold conditions. Fuel 144 (2015), 80–89.
9. [9] Dharma, S., Masjuki, H., Ong, H.C., Sebayang, A., Silitonga, A., Kusumo, F., et al. Optimization of biodiesel production process for mixed Jatropha curcas–Ceiba pentandra biodiesel using response surface methodology. Energ Convers Manage 115 (2016), 178–190.
10. [10] Silitonga, A.S., Masjuki, H.H., Ong, H.C., Kusumo, F., Mahlia, T.M.I., Bahar, A.H., Pilot-scale production and the physicochemical properties of palm and Calophyllum inophyllum biodiesels and their blends. J Clean Prod 126 (2016), 654–666.
11. [11] Maryana, R., Ma'rifatun, D., Wheni, A., Satriyo, K., Rizal, W.A., Alkaline pretreatment on sugarcane bagasse for bioethanol production. Energy Proc 47 (2014), 250–254.
12. [12] Jusuf, M., Ginting, E., The prospects and challenges of sweet potato as bio-ethanol source in Indonesia. Energ Proc 47 (2014), 173–179.
13. [13] Anderson, J.E., DiCicco, D.M., Ginder, J.M., Kramer, U., Leone, T.G., Raney-Pablo, H.E., et al. High octane number ethanol–gasoline blends: quantifying the potential benefits in the United States. Fuel 97 (2012), 585–594.
14. [14] Shahir, S., Masjuki, H., Kalam, M., Imran, A., Fattah, I.R., Sanjid, A., Feasibility of diesel biodiesel ethanol/bioethanol blend as existing CI engine fuel: an assessment of properties, material compatibility, safety and combustion. Renew Sust Energ Rev 32 (2014), 379–395.
15. [15] Romaní, A., Garrote, G., Ballesteros, I., Ballesteros, M., Second generation bioethanol from steam exploded Eucalyptus globulus wood. Fuel 111 (2013), 66–74.
16. [16] Tan, I.S., Lee, K.T., Enzymatic hydrolysis and fermentation of seaweed solid wastes for bioethanol production: an optimization study. Energy 78 (2014), 53–62.
17. [17] Ashokkumar, V., Salam, Z., Sathishkumar, P., Hadibarata, T., Yusoff, A.R.M., Ani, F.N., Exploration of fast growing Botryococcus sudeticus for upstream and downstream process in sustainable biofuels production. J Clean Prod 92 (2015), 162–167.
18. [18] Gupta, A., Verma, J.P., Sustainable bio-ethanol production from agro-residues: a review. Renew Sust Energ Rev 41 (2015), 550–567.
19. [19] Cheng, J.J., Timilsina, G.R., Status and barriers of advanced biofuel technologies: a review. Renew Energ 36 (2011), 3541–3549.
20. [20] Nigam, P.S., Singh, A., Production of liquid biofuels from renewable resources. Prog Energ Combust 37 (2011), 52–68.
21. [21] Bracco, S., Effectiveness of EU biofuels sustainability criteria in the context of land acquisitions in Africa. Renew Sust Energ Rev 50 (2015), 130–143.
22. [22] Gunatilake, H., Roland-Holst, D., Sugiyarto, G., Energy security for India: biofuels, energy efficiency and food productivity. Energ Policy 65 (2014), 761–767.
23. [23] Altenburg, T., Biodiesel policies for India: achieving optimal socio-economic and environmental impact. J Biofuel 1 (2010), 163–171.
24. [24] Peidong, Z., Yanli, Y., Yongsheng, T., Xutong, Y., Yongkai, Z., Yonghong, Z., et al. Bioenergy industries development in China: dilemma and solution. Renew Sust Energ Rev 13 (2009), 2571–2579.
25. [25] Ji, L.-Q., An assessment of agricultural residue resources for liquid biofuel production in China. Renew Sust Energ Rev 44 (2015), 561–575.
26. [26] Ziolkowska, J.R., Prospective technologies, feedstocks and market innovations for ethanol and biodiesel production in the US. Biotechnol Rep 4 (2014), 94–98.
27. [27] Jayed, M., Masjuki, H., Kalam, M., Mahlia, T., Husnawan, M., Liaquat, A., Prospects of dedicated biodiesel engine vehicles in Malaysia and Indonesia. Renew Sust Energ Rev 15 (2011), 220–235.
28. [28] Yusoff, M.H.M., Abdullah, A.Z., Sultana, S., Ahmad, M., Prospects and current status of B5 biodiesel implementation in Malaysia. Energ Policy 62 (2013), 456–462.
29. [29] Dillon, H.S., Laan, T., Dillon, H.S., Biofuels, at what cost?: government support for ethanol and biodiesel in Indonesia. 2008, International Institute for Sustainable Development Winnipeg, MB, Canada.
30. [30] Organisation for Economic Co-operation and Development (OECD). Agricultural Outlook; 2015. < https://statsoecdorg/Indexaspx?DataSetCode=HIGH_AGLINK_2012>.
31. [31] Sorate, K.A., Bhale, P.V., Biodiesel properties and automotive system compatibility issues. Renew Sust Energ Rev 41 (2015), 777–798.
32. [32] Altun, Ş., Lapuerta, M., Properties and emission indicators of biodiesel fuels obtained from waste oils from the Turkish industry. Fuel 128 (2014), 288–295.
33. [33] Ashraful, A., Masjuki, H., Kalam, M., Fattah, I.R., Imtenan, S., Shahir, S., et al. Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: a review. Energ Convers Manage 80 (2014), 202–228.
34. [34] Gandure, J., Ketlogetswe, C., Temu, A., Fuel properties of biodiesel produced from selected plant kernel oils indigenous to Botswana: a comparative analysis. Renew Energ 68 (2014), 414–420.
35. [35] Sanford, S., White, J., Shah, P., Wee, C., Valverde, M., Meier, G., Feedstock and biodiesel characteristics report. 2009, Renewable Energy Group. Inc, Ames, IA.
36. [36] Černoch, M., Hájek, M., Skopal, F., Relationships among flash point, carbon residue, viscosity and some impurities in biodiesel after ethanolysis of rapeseed oil. Bioresource Technol 101 (2010), 7397–7401.
37. [37] Geacai, S., Iulian, O., Nita, I., Measurement, correlation and prediction of biodiesel blends viscosity. Fuel 143 (2015), 268–274.
38. [38] Lin, R., Zhu, Y., Tavlarides, L.L., Effect of thermal decomposition on biodiesel viscosity and cold flow property. Fuel 117:Part B (2014), 981–988.
39. [39] Verduzco, L.F.R., Density and viscosity of biodiesel as a function of temperature: empirical models. Renew Sust Energ Rev 19 (2013), 652–665.
40. [40] Gülüm, M., Bilgin, A., Density, flash point and heating value variations of corn oil biodiesel–diesel fuel blends. Fuel Process Technol 134 (2015), 456–464.
41. [41] Martínez, G., Sánchez, N., Encinar, J., González, J., Fuel properties of biodiesel from vegetable oils and oil mixtures. Influence of methyl esters distribution. Biomass Bioenerg 63 (2014), 22–32.
42. [42] Chattopadhyay, S., Sen, R., Fuel properties, engine performance and environmental benefits of biodiesel produced by a green process. Appl Energ 105 (2013), 319–326.
43. [43] Agarwal, A.K., Dhar, A., Gupta, J.G., Kim, W.I., Choi, K., Lee, C.S., et al. Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics. Energ Convers Manage 91 (2015), 302–314.
44. [44] Barabás, I., Liquid densities and excess molar volumes of ethanol + biodiesel binary system between the temperatures 273.15 K and 333.15 K. J Mol Liq 204 (2015), 95–99.
45. [45] Carareto, N.D., Kimura, C.Y., Oliveira, E.C., Costa, M.C., Meirelles, A.J., Flash points of mixtures containing ethyl esters or ethylic biodiesel and ethanol. Fuel 96 (2012), 319–326.
46. [46] Boog, J.H.F., Silveira, E.L.C., De Caland, L.B., Tubino, M., Determining the residual alcohol in biodiesel through its flash point. Fuel 90 (2011), 905–907.
47. [47] Mittelbach, M., Remschmidt, C., Biodiesel: the comprehensive handbook. Martin Mittelbach, 2004.
48. [48] Mejía, J.D., Salgado, N., Orrego, C.E., Effect of blends of Diesel and Palm-Castor biodiesels on viscosity, cloud point and flash point. Ind Crop Prod 43 (2013), 791–797.
49. [49] Dwivedi, G., Sharma, M., Impact of cold flow properties of biodiesel on engine performance. Renew Sust Energ Rev 31 (2014), 650–656.
50. [50] Imahara, H., Minami, E., Saka, S., Thermodynamic study on cloud point of biodiesel with its fatty acid composition. Fuel 85 (2006), 1666–1670.
51. [51] Pullen, J., Saeed, K., An overview of biodiesel oxidation stability. Renew Sust Energ Rev 16 (2012), 5924–5950.
52. [52] Dunn, R.O., Effect of antioxidants on the oxidative stability of methyl soyate (biodiesel). Fuel Process Technol 86 (2005), 1071–1085.
53. [53] Schober, S., Mittelbach, M., The impact of antioxidants on biodiesel oxidation stability. Eur J Lipid Sci Tech 106 (2004), 382–389.
54. [54] Chen, Y.-H., Luo, Y.-M., Oxidation stability of biodiesel derived from free fatty acids associated with kinetics of antioxidants. Fuel Process Technol 92 (2011), 1387–1393.
55. [55] Avila Orozco, F.D., Sousa, A.C., Domini, C.E., Ugulino Araujo, M.C., Fernández Band, B.S., An ultrasonic-accelerated oxidation method for determining the oxidative stability of biodiesel. Ultrason Sonochem 20 (2013), 820–825.
56. [56] Ramírez-Verduzco, L.F., Rodríguez-Rodríguez, J.E., del Rayo Jaramillo-Jacob, A., Predicting cetane number, kinematic viscosity, density and higher heating value of biodiesel from its fatty acid methyl ester composition. Fuel 91 (2012), 102–111.
57. [57] Rocabruno-Valdés, C., Ramírez-Verduzco, L., Hernández, J., Artificial neural network models to predict density, dynamic viscosity, and cetane number of biodiesel. Fuel 147 (2015), 9–17.
58. [58] Iqbal, M.A., Varman, M., Hassan, M.H., Kalam, M.A., Hossain, S., Sayeed, I., Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. J Clean Prod 101 (2015), 262–270.
59. [59] Sajjad, H., Masjuki, H., Varman, M., Kalam, M., Arbab, M., Imtenan, S., et al. Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renew Sust Energ Rev 30 (2014), 961–986.
60. [60] Vilutienė, V., Labeckas, G., Slavinskas, S., The influence of the cetane number and lubricity improving additives on the quality parameters of aviation-turbine fuel. Aviation 19 (2015), 72–77.
61. [61] Qiu, F., Li, Y., Yang, D., Li, X., Sun, P., Biodiesel production from mixed soybean oil and rapeseed oil. Appl Energ 88 (2011), 2050–2055.
62. [62] Huang, G., Chen, F., Wei, D., Zhang, X., Chen, G., Biodiesel production by microalgal biotechnology. Appl Energ 87 (2010), 38–46.
63. [63] Feng, Y., Zhang, A., Li, J., He, B., A continuous process for biodiesel production in a fixed bed reactor packed with cation-exchange resin as heterogeneous catalyst. Bioresour Technol 102 (2011), 3607–3609.
64. [64] Knothe, G., Biodiesel and renewable diesel: a comparison. Prog Energ Combust 36 (2010), 364–373.
65. [65] Ahmad, J., Yusup, S., Bokhari, A., Kamil, R.N.M., Study of fuel properties of rubber seed oil based biodiesel. Energ Convers Manage 78 (2014), 266–275.
66. [66] Alptekin, E., Canakci, M., Sanli, H., Biodiesel production from vegetable oil and waste animal fats in a pilot plant. Waste Manage 34 (2014), 2146–2154.
67. [67] Al-Widyan, M.I., Al-Shyoukh, A.O., Experimental evaluation of the transesterification of waste palm oil into biodiesel. Bioresource Technol 85 (2002), 253–256.
68. [68] Atabani, A., Silitonga, A., Ong, H., Mahlia, T., Masjuki, H., Badruddin, I.A., et al. Non-edible vegetable oils: a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production. Renew Sust Energ Rev 18 (2013), 211–245.
69. [69] Canakci, M., Sanli, H., Biodiesel production from various feedstocks and their effects on the fuel properties. J Ind Microbiol Biot 35 (2008), 431–441.
70. [70] Çetinkaya, M., Ulusoy, Y., Tekìn, Y., Karaosmanoğlu, F., Engine and winter road test performances of used cooking oil originated biodiesel. Energ Convers Manage 46 (2005), 1279–1291.
71. [71] Enweremadu, C., Mbarawa, M., Technical aspects of production and analysis of biodiesel from used cooking oil—a review. Renew Sust Energ Rev 13 (2009), 2205–2224.
72. [72] Issariyakul, T., Kulkarni, M.G., Dalai, A.K., Bakhshi, N.N., Production of biodiesel from waste fryer grease using mixed methanol/ethanol system. Fuel Process Technol 88 (2007), 429–436.
73. [73] Kumar, M.S., Kerihuel, A., Bellettre, J., Tazerout, M., Experimental investigations on the use of preheated animal fat as fuel in a compression ignition engine. Renew Energ 30 (2005), 1443–1456.
74. [74] Lapuerta, M., Herreros, J.M., Lyons, L.L., García-Contreras, R., Briceño, Y., Effect of the alcohol type used in the production of waste cooking oil biodiesel on diesel performance and emissions. Fuel 87 (2008), 3161–3169.
75. [75] Lertsathapornsuk, V., Pairintra, R., Aryusuk, K., Krisnangkura, K., Microwave assisted in continuous biodiesel production from waste frying palm oil and its performance in a 100 kW diesel generator. Fuel Process Technol 89 (2008), 1330–1336.
76. [76] Meng, X., Chen, G., Wang, Y., Biodiesel production from waste cooking oil via alkali catalyst and its engine test. Fuel Process Technol 89 (2008), 851–857.
77. [77] Mofijur, M., Masjuki, H., Kalam, M., Atabani, A., Shahabuddin, M., Palash, S., et al. Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: a review. Renew Sust Energ Rev 28 (2013), 441–455.
78. [78] Wyatt, V.T., Hess, M.A., Dunn, R.O., Foglia, T.A., Haas, M.J., Marmer, W.N., Fuel properties and nitrogen oxide emission levels of biodiesel produced from animal fats. J Am Oil Chem Soc 82 (2005), 585–591.
79. [79] Yin, X., You, Q., Ma, H., Dai, C., Zhang, H., Li, K., et al. Biodiesel production from soybean oil deodorizer distillate enhanced by counter-current pulsed ultrasound. Ultrason Sonochem 23 (2015), 53–58.
80. [80] Masum, B.M., Masjuki, H.H., Kalam, M.A., Rizwanul Fattah, I.M., Palash, S.M., Abedin, M.J., Effect of ethanol–gasoline blend on NOx emission in SI engine. Renew Sust Energ Rev 24 (2013), 209–222.
81. [81] Balat, M., Balat, H., Öz, C., Progress in bioethanol processing. Prog Energ Combust 34 (2008), 551–573.
82. [82] Manzetti, S., Andersen, O., A review of emission products from bioethanol and its blends with gasoline. Background for new guidelines for emission control. Fuel 140 (2015), 293–301.
83. [83] Yoon, S.H., Lee, C.S., Effect of undiluted bioethanol on combustion and emissions reduction in a SI engine at various charge air conditions. Fuel 97 (2012), 887–890.
84. [84] Balat, M., Production of bioethanol from lignocellulosic materials via the biochemical pathway: a review. Energ Convers Manage 52 (2011), 858–875.
85. [85] Balat, M., Global status of biomass energy use. Energ Sources Part A 31 (2009), 1160–1173.
86. [86] Najafi, G., Ghobadian, B., Tavakoli, T., Buttsworth, D., Yusaf, T., Faizollahnejad, M., Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network. Appl Energ 86 (2009), 630–639.
87. [87] Yoon, S., Ha, S., Roh, H., Lee, C., Effect of bioethanol as an alternative fuel on the emissions reduction characteristics and combustion stability in a spark ignition engine. P I Mech Eng D J Aut 223 (2009), 941–951.
88. [88] Balat, M., Global bio-fuel processing and production trends. Energ Explor Exploit 25 (2007), 195–218.
89. [89] Yoon, S.H., Lee, C.S., Lean combustion and emission characteristics of bioethanol and its blends in a spark ignition (SI) engine. Energ Fuel 25 (2011), 3484–3492.
90. [90] Fernando, S., Hanna, M., Development of a novel biofuel blend using ethanol-biodiesel-diesel microemulsions: EB-diesel. Energ Fuel 18 (2004), 1695–1703.
91. [91] Hansen, A.C., Zhang, Q., Lyne, P.W., Ethanol diesel fuel blends a review. Bioresour Technol 96 (2005), 277–285.
92. [92] Chotwichien, A., Luengnaruemitchai, A., Jai-In, S., Utilization of palm oil alkyl esters as an additive in ethanol–diesel and butanol–diesel blends. Fuel 88 (2009), 1618–1624.
93. [93] Pidol, L., Lecointe, B., Starck, L., Jeuland, N., Ethanol–biodiesel–diesel fuel blends: performances and emissions in conventional diesel and advanced low temperature combustions. Fuel 93 (2012), 329–338.
94. [94] Kim, H., Choi, B., The effect of biodiesel and bioethanol blended diesel fuel on nanoparticles and exhaust emissions from CRDI diesel engine. Renew Energ 35 (2010), 157–163.
95. [95] Lapuerta, M., Armas, O., García-Contreras, R., Effect of ethanol on blending stability and diesel engine emissions. Energ Fuel 23 (2009), 4343–4354.
96. [96] Barabas, I., Todoruţ, A., Băldean, D., Performance and emission characteristics of an CI engine fueled with diesel–biodiesel–bioethanol blends. Fuel 89 (2010), 3827–3832.
97. [97] Barabás, I., Todoruţ, I.-A., Utilization of biodiesel-diesel-ethanol blends in CI engine. Biodiesel-quality, emissions and by-products. InTech, 2011, 215–234.
98. [98] Cheenkachorn, K., Fungtammasan, B., An investigation of diesel-ethanol-biodiesel blends for diesel engine: Part 1. Emulsion stability and fuel properties. Energ Source 32:Part A (2010), 637–644.
99. [99] Hulwan, D.B., Joshi, S.V., Performance, emission and combustion characteristic of a multicylinder DI diesel engine running on diesel–ethanol–biodiesel blends of high ethanol content. Appl Energ 88 (2011), 5042–5055.
100. [100] Kannan G. Effect of injection pressures and timings on the performance emission and combustion characteristics of a direct injection diesel engine using biodiesel-diesel-ethanol blend. SAE Technical Paper; 2013.
101. [101] Pang, X., Shi, X., Mu, Y., He, H., Shuai, S., Chen, H., et al. Characteristics of carbonyl compounds emission from a diesel-engine using biodiesel–ethanol–diesel as fuel. Atmos Environ 40 (2006), 7057–7065.
102. [102] Shi, X., Yu, Y., He, H., Shuai, S., Wang, J., Li, R., Emission characteristics using methyl soyate–ethanol–diesel fuel blends on a diesel engine. Fuel 84 (2005), 1543–1549.
103. [103] Sundaresan M, Chandrasekaran S, Porai PT. Analysis of combustion, performance and emission characteristics of blends of methyl esters of jatropha oil (MEJ) in DI diesel engine. SAE Technical Paper; 2007.
104. [104] Haşimoğlu, C., Ciniviz, M., Özsert, İ., İçingür, Y., Parlak, A., Salman, M.S., Performance characteristics of a low heat rejection diesel engine operating with biodiesel. Renew Energ 33 (2008), 1709–1715.
105. [105] Qi, D., Geng, L., Chen, H., Bian, Y.Z., Liu, J., Ren, X.C., Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil. Renew Energ 34 (2009), 2706–2713.
106. [106] Xue, J., Grift, T.E., Hansen, A.C., Effect of biodiesel on engine performances and emissions. Renew Sust Energ Rev 15 (2011), 1098–1116.
107. [107] Fazal, M.A., Haseeb, A.S.M.A., Masjuki, H.H., Biodiesel feasibility study: an evaluation of material compatibility; performance; emission and engine durability. Renew Sust Energ Rev 15 (2011), 1314–1324.
108. [108] Fernando, S., Karra, P., Hernandez, R., Jha, S.K., Effect of incompletely converted soybean oil on biodiesel quality. Energy 32 (2007), 844–851.
109. [109] Bari, S., Performance, combustion and emission tests of a metro-bus running on biodiesel-ULSD blended (B20) fuel. Appl Energ 124 (2014), 35–43.
110. [110] Özener, O., Yüksek, L., Ergenç, A.T., Özkan, M., Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics. Fuel 115 (2014), 875–883.
111. [111] Jindal, M., Rosha, P., Mahla, S.K., Dhir, A., Experimental investigation of performance and emissions characteristics of waste cooking oil biodiesel and n-butanol blends in a compression ignition engine. RSC Adv 5 (2015), 33863–33868.
112. [112] Kumar, N., Varun, Chauhan, S.R., Evaluation of endurance characteristics for a modified diesel engine runs on jatropha biodiesel. Appl Energ 155 (2015), 253–269.
113. [113] Oo, C.W., Shioji, M., Nakao, S., Dung, N.N., Reksowardojo, I., Roces, S.A., et al. Ignition and combustion characteristics of various biodiesel fuels (BDFs). Fuel, 2015.
114. [114] Gumus, M., A comprehensive experimental investigation of combustion and heat release characteristics of a biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engine. Fuel 89 (2010), 2802–2814.
115. [115] Teoh, Y.H., Masjuki, H.H., Kalam, M.A., Amalina, M.A., How, H.G., Effects of Jatropha biodiesel on the performance, emissions, and combustion of a converted common-rail diesel engine. RSC Adv 4 (2014), 50739–50751.
116. [116] Mangus, M., Kiani, F., Mattson, J., Tabakh, D., Petka, J., Depcik, C., et al. Investigating the compression ignition combustion of multiple biodiesel/ULSD (ultra-low sulfur diesel) blends via common-rail injection. Energy 89 (2015), 932–945.
117. [117] Özçelik, A.E., Aydoğan, H., Acaroğlu, M., Determining the performance, emission and combustion properties of camelina biodiesel blends. Energ Convers Manage 96 (2015), 47–57.
118. [118] Costa, R.C., Sodré, J.R., Compression ratio effects on an ethanol/gasoline fuelled engine performance. Appl Therm Eng 31 (2011), 278–283.
119. [119] Topgül, T., Yücesu, H.S., Cinar, C., Koca, A., The effects of ethanol–unleaded gasoline blends and ignition timing on engine performance and exhaust emissions. Renew Energ 31 (2006), 2534–2542.
120. [120] Bayraktar, H., Experimental and theoretical investigation of using gasoline–ethanol blends in spark-ignition engines. Renew Energ 30 (2005), 1733–1747.
121. [121] Yücesu, H.S., Topgül, T., Cinar, C., Okur, M., Effect of ethanol–gasoline blends on engine performance and exhaust emissions in different compression ratios. Appl Therm Eng 26 (2006), 2272–2278.
122. [122] Al-Hasan, M., Effect of ethanol–unleaded gasoline blends on engine performance and exhaust emission. Energ Convers Manage 44 (2003), 1547–1561.
123. [123] Tangka, J., Berinyuy, J., Okale, A., Physico-chemical properties of bio-ethanol/gasoline blends and the qualitative effect of different blends on gasoline quality and engine performance. J Petrol Technol Alt Fuel 2 (2011), 35–44.
124. [124] Costagliola, M., De Simio, L., Iannaccone, S., Prati, M., Combustion efficiency and engine out emissions of a SI engine fueled with alcohol/gasoline blends. Appl Energy 111 (2013), 1162–1171.
125. [125] Turkcan, A., Ozsezen, A.N., Canakci, M., Effects of second injection timing on combustion characteristics of a two stage direct injection gasoline–alcohol HCCI engine. Fuel 111 (2013), 30–39.
126. [126] Turkcan, A., Ozsezen, A.N., Canakci, M., Experimental investigation of the effects of different injection parameters on a direct injection HCCI engine fueled with alcohol–gasoline fuel blends. Fuel Process Technol 126 (2014), 487–496.
127. [127] Sadeghinezhad, E., Kazi, S.N., Sadeghinejad, F., Badarudin, A., Mehrali, M., Sadri, R., et al. A comprehensive literature review of bio-fuel performance in internal combustion engine and relevant costs involvement. Renew Sust Energ Rev 30 (2014), 29–44.
128. [128] Yilmaz, N., Vigil, F.M., Donaldson, A.B., Darabseh, T., Investigation of CI engine emissions in biodiesel–ethanol–diesel blends as a function of ethanol concentration. Fuel 115 (2014), 790–793.
129. [129] Zhu, L., Cheung, C., Zhang, W., Huang, Z., Combustion, performance and emission characteristics of a DI diesel engine fueled with ethanol–biodiesel blends. Fuel 90 (2011), 1743–1750.
130. [130] Labeckas, G., Slavinskas, S., Mažeika, M., The effect of ethanol–diesel–biodiesel blends on combustion, performance and emissions of a direct injection diesel engine. Energ Convers Manage 79 (2014), 698–720.
131. [131] Su, J., Zhu, H., Bohac, S.V., Particulate matter emission comparison from conventional and premixed low temperature combustion with diesel, biodiesel and biodiesel–ethanol fuels. Fuel 113 (2013), 221–227.
132. [132] Armas, O., Martínez-Martínez, S., Mata, C., Effect of an ethanol–biodiesel–diesel blend on a common rail injection system. Fuel Process Technol 92 (2011), 2145–2153.
133. [133] Kannan, G.R., Anand, R., Experimental investigation on diesel engine with diestrol–water micro emulsions. Energy 36 (2011), 1680–1687.
134. [134] Agarwal, A.K., Rajamanoharan, K., Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine. Appl Energ 86 (2009), 106–112.
135. [135] Aydın, S., Sayın, C., Impact of thermal barrier coating application on the combustion, performance and emissions of a diesel engine fueled with waste cooking oil biodiesel–diesel blends. Fuel 136 (2014), 334–340.
136. [136] Can, Ö., Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture. Energ Convers Manage 87 (2014), 676–686.
137. [137] Misra, R., Murthy, M., Performance, emission and combustion evaluation of soapnut oil–diesel blends in a compression ignition engine. Fuel 90 (2011), 2514–2518.
138. [138] MohamedMusthafa, M., Sivapirakasam, S., Udayakumar, M., Comparative studies on fly ash coated low heat rejection diesel engine on performance and emission characteristics fueled by rice bran and pongamia methyl ester and their blend with diesel. Energy 36 (2011), 2343–2351.
139. [139] Raheman, H., Phadatare, A., Diesel engine emissions and performance from blends of karanja methyl ester and diesel. Biomass Bioenerg 27 (2004), 393–397.
140. [140] Yüksel, F., Yüksel, B., The use of ethanol–gasoline blend as a fuel in an SI engine. Renew Energ 29 (2004), 1181–1191.
141. [141] Fazal, M., Haseeb, A., Masjuki, H., Investigation of friction and wear characteristics of palm biodiesel. Energ Convers Manage 67 (2013), 251–256.
142. [142] Mosarof, M., Kalam, M., Masjuki, H., Ashraful, A., Rashed, M., Imdadul, H., et al. Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics. Energ Convers Manage 105 (2015), 617–629.
143. [143] Serrano, L.M., Câmara, R.M., Carreira, V.J., Da Silva, M.G., Performance study about biodiesel impact on buses engines using dynamometer tests and fleet consumption data. Energ Convers Manage 60 (2012), 2–9.
144. [144] Tung, S.C., McMillan, M.L., Automotive tribology overview of current advances and challenges for the future. Tribol Int 37 (2004), 517–536.
145. [145] Agarwal, S., Chhibber, V.K., Bhatnagar, A.K., Tribological behavior of diesel fuels and the effect of anti-wear additives. Fuel 106 (2013), 21–29.
146. [146] Haseeb, A., Masjuki, H., Ann, L., Fazal, M., Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Process Technol 91 (2010), 329–334.
147. [147] Treutler, C.P., Industrial use of plasma-deposited coatings for components of automotive fuel injection systems. Surf Coat Technol 200 (2005), 1969–1975.
148. [148] Pehan, S., Jerman, M.S., Kegl, M., Kegl, B., Biodiesel influence on tribology characteristics of a diesel engine. Fuel 88 (2009), 970–979.
149. [149] Haseeb, A., Sia, S., Fazal, M., Masjuki, H., Effect of temperature on tribological properties of palm biodiesel. Energy 35 (2010), 1460–1464.
150. [150] de Almeida, F.A., Maru, M.M., do Nascimento Batista, L., de Oliveira, F.J.A., e Silva, R.R.F., Achete, C.A., Wear and friction behaviour of Si 3 N 4 ceramics under diesel and biodiesel lubrication. J Mater Res Technol 2 (2013), 110–116.
151. [151] Habibullah, M., Masjuki, H., Kalam, M., Zulkifli, N., Masum, B., Arslan, A., et al. Friction and wear characteristics of Calophyllum inophyllum biodiesel. Ind Crop Prod 76 (2015), 188–197.
152. [152] Ashraful, A.M., Masjuki, H.H., Kalam, M.A., Rashedul, H.K., Sajjad, H., Abedin, M.J., Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energ Convers Manage 87 (2014), 48–57.
153. [153] Matuszewska, A., Odziemkowska, M., Czarnocka, J., Properties of bioethanol-diesel oil mixtures. Chemik 65 (2013), 543–548.
154. [154] Bandeira, A., Trentin, R., Aguzzoli, C., da Costa, M.M., Michels, A., Baumvol, I., et al. Sliding wear and friction behavior of CrN-coating in ethanol and oil–ethanol mixture. Wear 301 (2013), 786–794.
155. [155] Tung, S.C., Gao, H., Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels. Wear 255 (2003), 1276–1285.
156. [156] Lenauer, C., Tomastik, C., Wopelka, T., Jech, M., Piston ring wear and cylinder liner tribofilm in tribotests with lubricants artificially altered with ethanol combustion products. Tribol Int 82 (2015), 415–422.
157. [157] Hansen, A.C., Zhang, Q., Lyne, P.W.L., Ethanol–diesel fuel blends –– a review. Bioresource Technol 96 (2005), 277–285.
158. [158] Li, D.-G., Zhen, H., Xingcai, L., Wu-gao, Z., Jian-guang, Y., Physico-chemical properties of ethanol–diesel blend fuel and its effect on performance and emissions of diesel engines. Renew Energ 30 (2005), 967–976.
159. [159] Lapuerta, M., Garcia-Contreras, R., Agudelo, J.R., Lubricity of ethanol-biodiesel-diesel fuel blends. Energ Fuel 24 (2010), 1374–1379.
160. [160] Rakopoulos, C., Antonopoulos, K., Rakopoulos, D., Hountalas, D., Multi-zone modeling of combustion and emissions formation in DI diesel engine operating on ethanol–diesel fuel blends. Energ Convers Manage 49 (2008), 625–643.
161. [161] Tandon, A., Kumar, A., Mondal, P., Vijay, P., Bhangale, U.D., Dinesh, T., Tribological issues related to the use of biofuels: a new environmental challenge. Brit J Env Clim Change 1 (2011), 28–43.
162. [162] Vytautas, B., Rimantas, S., Tribological properties of biodiesel fuel and its mixtures with diesel fuel. Transbaltica 1 (2009), 24–26.
163. [163] Singh, B., Korstad, J., Sharma, Y., A critical review on corrosion of compression ignition (CI) engine parts by biodiesel and biodiesel blends and its inhibition. Renew Sust Energ Rev 16 (2012), 3401–3408.
164. [164] Fazal, M.A., Haseeb, A.S.M.A., Masjuki, H.H., Corrosion mechanism of copper in palm biodiesel. Corros Sci 67 (2013), 50–59.
165. [165] Bhardwaj, M., Gupta, P., Kumar, N., Compatibility of metals and elastomers in biodiesel-a review. Int J Res 1 (2014), 376–391.
166. [166] Fazal, M., Haseeb, A., Masjuki, H., Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Process Technol 91 (2010), 1308–1315.
167. [167] Hu, E., Xu, Y., Hu, X., Pan, L., Jiang, S., Corrosion behaviors of metals in biodiesel from rapeseed oil and methanol. Renew Energ 37 (2012), 371–378.
168. [168] Wang, W., Jenkins, P.E., Ren, Z., Electrochemical corrosion of carbon steel exposed to biodiesel/simulated seawater mixture. Corros Sci 57 (2012), 215–219.
169. [169] Surisetty, V.R., Dalai, A.K., Kozinski, J., Alcohols as alternative fuels: an overview. Appl Catal A-Gen 404 (2011), 1–11.
170. [170] Yahagi, Y., Mizutani, Y., Corrosive wear of steel in gasoline-ethanol-water mixtures. Wear 97 (1984), 17–25.
171. [171] Baena, L., Gómez, M., Calderón, J., Aggressiveness of a 20% bioethanol–80% gasoline mixture on autoparts: I behavior of metallic materials and evaluation of their electrochemical properties. Fuel 95 (2012), 320–328.
172. [172] Boniatti, R., Bandeira, A.L., Crespi, Â.E., Aguzzoli, C., Baumvol, I.J., Figueroa, C.A., The influence of surface microstructure and chemical composition on corrosion behaviour in fuel-grade bio-ethanol of low-alloy steel modified by plasma nitro-carburizing and post-oxidizing. Appl Surf Sci 280 (2013), 156–163.
173. [173] Cao, L., Frankel, G., Sridhar, N., Effect of chloride on stress corrosion cracking susceptibility of carbon steel in simulated fuel grade ethanol. Electrochim Acta 104 (2013), 255–266.
174. [174] Krüger, L., Tuchscheerer, F., Mandel, M., Müller, S., Liebsch, S., Corrosion behaviour of aluminium alloys in ethanol fuels. J Mater Sci 47 (2012), 2798–2806.
175. [175] Park, I.-J., Nam, T.-H., Kim, J.-H., Kim, J.-G., Evaluation of corrosion characteristics of aluminum alloys in the bio-ethanol gasoline blended fuel by 2-electrode electrochemical impedance spectroscopy. Fuel 126 (2014), 26–31.
176. [176] Gulzar, M., Masjuki, H., Kalam, M., Varman, M., Fattah, I.R., Oil filter modification for biodiesel–fueled engine: a pathway to lubricant sustainability and exhaust emissions reduction. Energ Convers Manage 91 (2015), 168–175.
177. [177] Rakopoulos, C., Antonopoulos, K., Rakopoulos, D., Hountalas, D., Giakoumis, E., Comparative performance and emissions study of a direct injection diesel engine using blends of diesel fuel with vegetable oils or bio-diesels of various origins. Energ Convers Manage 47 (2006), 3272–3287.
178. [178] Kulkarni, M.G., Dalai, A., Bakhshi, N., Transesterification of canola oil in mixed methanol/ethanol system and use of esters as lubricity additive. Bioresour Technol 98 (2007), 2027–2033.
179. [179] Knothe, G., Steidley, K.R., Lubricity of components of biodiesel and petrodiesel. The origin of biodiesel lubricity. Energ Fuel 19 (2005), 1192–1200.
180. [180] Ng, J.-H., Ng, H.K., Gan, S., Advances in biodiesel fuel for application in compression ignition engines. Clean Technol Env 12 (2010), 459–493.
181. [181] Binod, P., Sindhu, R., Singhania, R.R., Vikram, S., Devi, L., Nagalakshmi, S., et al. Bioethanol production from rice straw: an overview. Bioresour Technol 101 (2010), 4767–4774.
182. [182] Hu, J., Du, Z., Li, C., Min, E., Study on the lubrication properties of biodiesel as fuel lubricity enhancers. Fuel 84 (2005), 1601–1606.
183. [183] Dhar, A., Agarwal, A.K., Experimental investigations of effect of Karanja biodiesel on tribological properties of lubricating oil in a compression ignition engine. Fuel 130 (2014), 112–119.
184. [184] Pikūnas, A., Pukalskas, S., Grabys, J., Influence of composition of gasoline ethanol blends on parameter of internal combustion engines. J Int Combust Engine 10 (2003), 3–4.
185. [185] Hsieh, W.-D., Chen, R.-H., Wu, T.-L., Lin, T.-H., Engine performance and pollutant emission of an SI engine using ethanol–gasoline blended fuels. Atmos Environ 36 (2002), 403–410.
186. [186] Noor, A.R., Annajaf City Naphtha as a Commercial Alternative Fuel for SI Engines in Iraq. Int J Mech Mechatro Eng, 12, 2012.
187. [187] Maher Sadiq, A.R., Yassar Ali, K., Aimen Rashad, N., Effects of ethanol-gasoline blends on exhaust and noise emissions from 4-stroke. S.I. Engine Eng Tech J 29 (2011), 1438–1450.
188. [188] Bielaczyc, P., Woodburn, J., Klimkiewicz, D., Pajdowski, P., Szczotka, A., An examination of the effect of ethanol–gasoline blends’ physicochemical properties on emissions from a light-duty spark ignition engine. Fuel Process Technol 107 (2013), 50–63.
189. [189] Dutcher, D.D., Stolzenburg, M.R., Thompson, S.L., Medrano, J.M., Gross, D.S., Kittelson, D.B., et al. Emissions from ethanol-gasoline blends: a single particle perspective. Atmosphere 2 (2011), 182–200.
190. [190] Lapuerta, M., García-Contreras, R., Campos-Fernández, J., Dorado, M.P., Stability, lubricity, viscosity, and cold-flow properties of alcohol–diesel blends. Energ Fuel 24 (2010), 4497–4502.
191. [191] Herreros, J.M., Schroer, K., Sukjit, E., Tsolakis, A., Extending the environmental benefits of ethanol–diesel blends through DGE incorporation. Appl Energ 146 (2015), 335–343.
192. [192] Collet, P., Hélias, A., Lardon, L., Steyer, J.-P., Bernard, O., Recommendations for Life Cycle Assessment of algal fuels. Appl Energy, 2015.
193. [193] Achten, W.M., Almeida, J., Fobelets, V., Bolle, E., Mathijs, E., Singh, V.P., et al. Life cycle assessment of Jatropha biodiesel as transportation fuel in rural India. Appl Energ 87 (2010), 3652–3660.
194. [194] Cherubini, F., Bird, N.D., Cowie, A., Jungmeier, G., Schlamadinger, B., Woess-Gallasch, S., Energy-and greenhouse gas-based LCA of biofuel and bioenergy systems: key issues, ranges and recommendations. Resour Conserv Recy 53 (2009), 434–447.
195. [195] Menichetti, E., Otto, M., Energy balance and greenhouse gas emissions of biofuels from a life-cycle perspective. Biofuels: Environmental Consequences and Interactions with Changing Land Use Proceedings of the Scientific Committee on Problems of the Environment (SCOPE) International Biofuels Project Rapid Assessment, 2008, University of Cornell, Ithaca NY, 81–109.
196. 2 emissions analysis of soybean-based biodiesel: a case study. J Clean Prod. 66 (2014), 233–241.
197. [197] Huo, H., Wang, M., Bloyd, C., Putsche, V., Life-cycle assessment of energy use and greenhouse gas emissions of soybean-derived biodiesel and renewable fuels. Environ Sci Technol 43 (2008), 750–756.
198. [198] Saswattecha, K., Kroeze, C., Jawjit, W., Hein, L., Assessing the environmental impact of palm oil produced in Thailand. J Clean Prod 100 (2015), 150–169.
199. [199] Yee, K.F., Tan, K.T., Abdullah, A.Z., Lee, K.T., Life cycle assessment of palm biodiesel: revealing facts and benefits for sustainability. Appl Energ, 86, 2009 S189-S96.
200. [200] Reijnders, L., Huijbregts, M., Palm oil and the emission of carbon-based greenhouse gases. J Clean Prod 16 (2008), 477–482.
201. [201] Spinelli, D., Jez, S., Pogni, R., Basosi, R., Environmental and life cycle analysis of a biodiesel production line from sunflower in the Province of Siena (Italy). Energ Policy 59 (2013), 492–506.
202. [202] Iriarte, A., Villalobos, P., Greenhouse gas emissions and energy balance of sunflower biodiesel: identification of its key factors in the supply chain. Resour Conserv Recy 73 (2013), 46–52.
203. [203] Morales, M., Quintero, J., Conejeros, R., Aroca, G., Life cycle assessment of lignocellulosic bioethanol: environmental impacts and energy balance. Renew Sust Energ Rev 42 (2015), 1349–1361.
204. [204] Pourbafrani, M., McKechnie, J., Shen, T., Saville, B.A., MacLean, H.L., Impacts of pre-treatment technologies and co-products on greenhouse gas emissions and energy use of lignocellulosic ethanol production. J Clean Prod 78 (2014), 104–111.
205. [205] Silalertruksa, T., Gheewala, S.H., The environmental and socio-economic impacts of bio-ethanol production in Thailand. Energy Proc 9 (2011), 35–43.
206. [206] Sobrino, F.H., Monroy, C.R., Pérez, J.L.H., Biofuels and fossil fuels: Life Cycle Analysis (LCA) optimisation through productive resources maximisation. Renew Sust Energ Rev 15 (2011), 2621–2628.