Synthesis and Characterization of Porous Hydrogel Based on Lignin and Polyacrylamide

BioResources

Volumn 9, Issue 3, 2014, Pages 4369-4381

  Feng, Qinghua ^a,b   Li, Jinling ^a   Cheng, Heli ^a   Chen, Fangeng ^c   Xie, Yimin ^a  

^a HUBEI UNIVERSITY OF TECHNOLOGY   (China)

^b QILU UNIVERSITY OF TECHNOLOGY   (China)

^c SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Acetic acid lignin; Dye removal; Hydrogel; Polyacrylamide; Porous structure

Indexed keywords

ACRYLIC MONOMERS; AMIDES; GRAFTING (CHEMICAL); HYDROGEN PEROXIDE; IMAGE ENHANCEMENT; LIGNIN; REMOVAL; THERMODYNAMIC STABILITY;

ACETIC ACID LIGNIN; DIMETHACRYLATES; DYE ADSORPTION; GRAFT CO POLYMERIZATIONS; HONEYCOMBLIKE STRUCTURES; LIGNIN CONTENTS; POROUS HYDROGELS; SYNTHESIS AND CHARACTERIZATIONS;

HYDROGELS;

AMIDES; COPOLYMERIZATION; DYES; HYDROGEN PEROXIDE; REMOVAL;

EID: 84988612444     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.3.4369-4381     Document Type: Article

References (31)

1. Bujanovic, B. M., Goundalkar, M. J., and Amidon, T. E. (2012). “Increasing the value of a biorefinery based on hot-water extraction: Lignin products,” Tappi J. 11(1), 19-26.
2. Caulfield, M. J., Qiao, G. G., and Solomon, D. H. (2002). “Some aspects of the properties and degradation of polyacrylamides,” Chem. Rev. 102(9), 3067-3084.
3. Chen, H., Zhao, J., Wu, J. Y., and Dai, G. L. (2011). “Isotherm, thermodynamic, kinetics and adsorption mechanism studies of methyl orange by surfactant modified silkworm exuviae,” J. Hazard. Mater. 192(1), 246-254.
4. Cheng, S. N., Yuan, Z. S., Leitch, M., Anderson, M., and Xu, C. C. (2013). “Highly efficient de-polymerization of organosolv lignin using a catalytic hydrothermal process and production of phenolic resins/adhesives with the depolymerized lignin as a substitute for phenol at a high substitution ratio,” Ind. Crops Prod. 44, 315-322.
5. Chung, H., and Washburn, N. R. (2012). “Chemistry of lignin-based materials,” Green Mater. 1(3), 137-160.
6. Cinelli, P., Anguillesi, I., and Lazzeri, A. (2013). “Green synthesis of flexible polyurethane foams from liquefied lignin,” Eur. Polym. J. 49(6), 1174-1184.
7. Consolin Filho, N., Venancio, E.C., Barriquello, M.F., Hechenleitner, A.A.W., and Pineda, E.A.G. (2007). “Methylene blue adsorption onto modified lignin from sugar cane bagasse,” Ecl. Quim (Sao Paulo) 32(4), 63-70.
8. Da Silva, L. G., Ruggiero, R., Gontijo, P. D. M., Pinto, R. B., Royer, B., Lima, E. C., Fernandes, T. H. M., and Calvete, T. (2011). “Adsorption of Brilliant Red 2BE dye from water solutions by a chemically modified sugarcane bagasse lignin,” Chem. Eng. J. 168(2), 620-628.
9. Dimmel, D. (2010). "Overview," in: Lignin and Lignans: Advances in Chemistry, C. Heitner, D. Dimmel, and J. Schmidt (eds.), CRC Press, Boca Raton.
10. Fang, R., Cheng, X.S., and Xu, X.R. (2010). “Synthesis of lignin-base cationic flocculant and its application in removing anionic azo-dyes from simulated wastewater,” Bioresour. Technol. 101(19), 7323-7329.
11. Feng, P., and Chen, F. G. (2012). “Preparation and characterization of acetic acid ligninbased epoxy blends,” BioResources 7(3), 2860-2870.
12. Feng, Q. H., Chen, F. G., and Wu, H. R. (2011). “Preparation and characterization of a temperature-sensitive lignin-based hydrogel,” BioResources 6(4), 4942-4952.
13. Feng, Q. H., Chen, F. G., and Zhou, X. S. (2012). “Preparation of thermo-sensitive hydrogels from acrylated lignin and N-isopropylacrylamide through photocrosslinking,” J. Biobased Mat. Bioen. 6(3), 336-342.
14. Freundlich, H. M. F. (1906). “Over the adsorption in solution,” J. Phys. Chem. 57, 385470.
15. Hennink, W. E., and Van Nostrum, C. F. (2012).“ Novel crosslinking methods to design hydrogels,” Adv. Drug Delivery Rev. 64(Supplement), 223-236.
16. Hubbe, M. A., Beck, K. R., O'Neal, W. G., and Sharma, Y. C. (2012). “Cellulosic substrates for removal of pollutants from aqueous systems: A review. 2. Dyes,” BioResources 7(2), 2592-2687.
17. Karadağ, E., Üzüm, Ö. B., and Saraydin, D. (2002). “Swelling equilibria and dye adsorption studies of chemically crosslinked superabsorbent acrylamide/maleic acid hydrogels,” Eur. Polym. J. 38(11), 2133-2141.
18. Langmuir, I. (1918). “The adsorption of gases on plane surfaces of glass, mica and platinum,” J. Am. Chem. Soc. 40(9), 1361-1403.
19. Lee, W. F., and Yeh, Y. C. (2005). “Studies on preparation and properties of NIPAAm/hydrophobic monomer copolymeric hydrogels,” Eur. Polym. J. 41(10), 2488-2495.
20. Li, Y., and Ragauskas, A. J. (2012). “Kraft lignin-based rigid polyurethane foam,” J. Wood Chem. Technol. 32(3), 210-224.
21. Liu, M. H., and Huang, J. H., (2006). “Removal and recovery of cationic dyes from aqueous solutions using spherical sulfonic lignin adsorbent,” J Appl. Polym. Sci. 101(4), 2284-2291.
22. Meister, J. J., and Chen, M. J. (1991). “Graft 1-phenylethylene copolymers of lignin. 1. Synthesis and proof of copolymerization,” Macromolecules 24(26), 6843-6848.
23. Pan, X. J., and Saddler, J. N. (2013). “Effect of replacing polyol by organosolv and kraft lignin on the property and structure of rigid polyurethane foam,” Biotechnol. Biofuel. 6(1), 12-21.
24. Qin, J. L., Woloctt, M., and Zhang, J. W. (2014). “Use of polycarboxylic acid derived from partially depolymerized lignin as a curing agent for epoxy application,” ACS Sustainable Chem. Eng. 2 (2), 188-193.
25. Sasaki, C., Wanaka, M., Takagi, H., Tamura, S., Asada, C., and Nakamura, Y. (2013). “Evaluation of epoxy resins synthesized from steam-exploded bamboo lignin,” Ind. Crops Prod. 43, 757-761.
26. Suteu, D., Malutan, T., and Bilba, D. (2010). “Removal of reactive dye Brilliant Red HE-3B from aqueous solutions by industrial lignin: Equilibrium and kinetics modeling,” Desalination 255(1), 84-90.
27. Uraki, Y., Sano, Y., and Sasaya, T. (1991). “Cooking of hardwoods with organosolv pulping in aqueous acetic acid containing sulfuric acid at atmospheric pressure,” Jpn. TAPPI J. 45(9), 1018-1024.
28. Yang, X. J, and Ni, L. (2012). “Synthesis of hybrid hydrogel of poly (AM co DADMAC)/silica sol and removal of methyl orange from aqueous solutions,” Chem. Eng. J. 209, 194-200.
29. Yang, Y. F., Xie, Y. L., Pang, L. C., Li, M., Song, X. H., Wen, J. G., and Zhao, H. Y. (2013). “Preparation of reduced graphene oxide/poly (acrylamide) nanocomposite and its adsorption of Pb (II) and methylene blue,” Langmuir 29(34), 10727-10736.
30. Yi, J. Z., and Zhang, L. M. (2008). “Removal of methylene blue dye from aqueous solution by adsorption onto sodium humate/polyacrylamide/clay hybrid hydrogels,” Bioresour. Technol. 99(7), 2182-2186.
31. Zhang, X. Z., Wu, D. Q., and Chu, C. C. (2004). “Synthesis and characterization of partially biodegradable, temperature and pH sensitive Dex-MA/PNIPAAm hydrogels,” Biomaterials 25(19), 4719-4730.