Optimisation of product configuration in consideration of customer satisfaction and low carbon

International Journal of Production Research

Volumn 55, Issue 12, 2017, Pages 3349-3373

  Tang, Dunbing ^a   Wang, Qi ^a   Ullah, Inayat ^a  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

Author keywords

design for the environment; low carbon product design; mass customisation; optimisation; product configuration

Indexed keywords

ENVIRONMENTAL IMPACT; GAS EMISSIONS; GREENHOUSE GASES; OPTIMIZATION; PRODUCT DESIGN; SALES;

DESIGN FOR THE ENVIRONMENT; LOW CARBON; MASS CUSTOMISATION; OPTIMISATIONS; PRODUCT CONFIGURATION;

CUSTOMER SATISFACTION;

EID: 84987896814     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2016.1231430     Document Type: Article

References (52)

1. Ayhan, M. B., and H. S., Kilic. 2015. “A Two Stage Approach for Supplier Selection Problem in Multi-item/multi-supplier Environment with Quantity Discounts.” Computers & Industrial Engineering 85:1–12.10.1016/j.cie.2015.02.026
2. Badiru, A. B., 1992. “Computational Survey of Univariate and Multivariate Learning Curve Models.” IEEE Transactions on Engineering Management 39 (2):176–188.10.1109/17.141275
3. Benyoucef, M., and M., Canbolat. 2007. “Fuzzy AHP-based Supplier Selection in e-procurement.” International Journal of Services & Operations Management 3 (2):172–192.10.1504/IJSOM.2007.012136
4. Charter, M., and U., Tischner. 2011. Sustainable Solutions:Developing Products and Services for the Future. Sheffield:Greenleaf Publishing.
5. Chen, L. C., and L., Lin. 2002. “Optimization of Product Configuration Design Using Functional Requirements and Constraints.” Research in Engineering Design 13 (3):167–182.
6. D’Souza, Bryan, and Timothy W., Simpson. 2003. “A Genetic Algorithm Based Method for Product Family Design Optimization.” Engineering Optimization 35 (1):1–18.10.1080/0305215031000069663
7. Dar-El, E. M., 2000. Human Learning:From Learning Curves to Learning Organizations. Boston, MA:Kluver Academic Publishers.10.1007/978-1-4757-3113-2
8. Du, X. H., J. X., Jiao, and M. T., Mitchell. 2003. “Modeling Platform-based Product Configuration Using Programmed Attributed Graph Grammars.” Journal of Engineering Design 14 (2):145–167.10.1080/0954482031000091482
9. Erixon, G., 1996. Design for Modularity. New York:Chapman & Hall.10.1007/978-94-011-3985-4
10. Fioretti, G., 2007. “The Organizational Learning Curve.” European Journal of Operational Research 177 (3):1375–1384.10.1016/j.ejor.2005.04.009
11. Fujita, K., H., Sakaguchi, and S., Akagi. 1999. “Product Variety Deployment and its Optimization Under Modular Architecture and Module Commonalization.” In Proceedings of the 1999 ASME Design Engineering Technical Conferences, 1–12. ASME, DETC99/DFM–8923, Las vegas, Nevada.
12. Hong, G., L., Hu, D., Xue, Y. L., Tu, and Y. L., Xiong. 2008. “Identification of the Optimal Product Configuration and Parameters Based on Individual Customer Requirements on Performance and Costs in One-of-a-kind Production.” International Journal of Production Research 46 (12):3297–3326.10.1080/00207540601099274
13. Hsiao, S. W., and H. C., Tsai. 2005. “Applying a Hybrid Approach Based on Fuzzy Neural Network and Genetic Algorithm to Product Form Design.” International Journal of Industrial Ergonomics 35 (5):411–428.10.1016/j.ergon.2004.10.007
14. Hsu, C. W., and A. H., Hu. 2009. “Applying Hazardous Substance Management to Supplier Selection Using Analytic Network Process.” Journal of Cleaner Production 17 (2):255–264.10.1016/j.jclepro.2008.05.004
15. Hsu, C. W., T. C., Kuo, and S. H., Chen. 2013. “Using DEMATEL to Develop a Carbon Management Model of Supplier Selection in Green Supply Chain Management.” Journal of Cleaner Production 56 (10):164–172.10.1016/j.jclepro.2011.09.012
16. Hu, A. H., and C. W., Hsu. 2010. “Critical Factors for Implementing Green Supply Chain Management Practice:An Empirical Study of Electrical and Electronics Industries in Taiwan.” Management Research Review 33 (6):586–608.10.1108/01409171011050208
17. Huang, H. Z., R. F., Bo, and X. F., Fan. 2005. “Concept Optimization for Mechanical Product Using Genetic Algorithm.” Journal of Mechanical Science & Technology 19 (5):1072–1079.10.1007/BF02984028
18. Huang, G. Q., and L. L. S., Li. 2008. “Genetic Algorithm-based Optimisation Method for Product Family Design with Multi-level Commonality.” Journal of Engineering Design 19 (5):401–416.10.1080/09544820701642063
19. Inderfurth, K., 1997. “Simple Optimal Replenishment and Disposal Policies for a Product Recovery System with Leadtimes.” Operations Research-Spektrum 19 (2):111–122.10.1007/BF01545510
20. IPCC (Intergovernmental Panel on Climate Change) 2007. IPCC Fourth Assessment Report:Climate Change 2007; Working Group III Report “Mitigation of Climate Change,” 447–496, Geneva.
21. Jia, Z. Y., X. H., Lu, and J. Y., Yang. 2010. “Research on Job-shop Scheduling Problem Based on Genetic Algorithm.” International Journal of Production Research 49 (49):3585–3604.
22. Jiang, Z. L., S. S., Xuanyuan, and L., Li. 2011. “Inventory-shortage Driven Optimisation for Product Configuration Variation.” International Journal of Production Research 49 (4):1045–1060.10.1080/00207540903555494
23. Jiao, J., Y., Zhang, and Y., Wang. 2007. “A Generic Genetic Algorithm for Product Family Design.” Journal of Intelligent Manufacturing 18 (2):233–247.10.1007/s10845-007-0019-7
24. Kuo, T. C., 2013. “The Construction of a Collaborative Framework in Support of Low Carbon Product Design.” Robotics and Computer-Integrated Manufacturing 29 (4):174–183.10.1016/j.rcim.2012.12.001
25. Kuo, R. J., Y. C., Wang, and F. C., Tien. 2010. “Integration of Artificial Neural Network and MADA Methods for Green Supplier Selection.” Journal of Cleaner Production 18 (12):1161–1170.10.1016/j.jclepro.2010.03.020
26. Kuo, T. C., H. M., Chen, C. Y., Liu, J. C., Tu, and T. C., Yeh. 2014. “Applying Multi-objective Planning in Low-carbon Product Design.” International Journal of Precision Engineering and Manufacturing 15 (2):241–249.10.1007/s12541-014-0331-z
27. Lee, H. J., and J. K., Lee. 2005. “An Effective Customization Procedure with Configurable Standard Models.” Decision Support Systems 41 (1):262–278.10.1016/j.dss.2004.06.010
28. Li, B., L. P., Chen, Z. D., Huang, and Y. F., Zhong. 2006. “Product Configuration optimization Using a Multi-objective Genetic Algorithm.” The International Journal of Advanced Manufacturing Technology 30 (1–2):20–29.10.1007/s00170-005-0035-8
29. Lienig, J., 1997. “A Parallel Genetic Algorithm for Performance-driven VLSI Routing.” IEEE Transactions on Evolutionary Computation 1 (1):29–39.10.1109/4235.585890
30. Liotta, G., G., Stecca, and T., Kaihara. 2015. “Optimisation of Freight Flows and Sourcing in Sustainable Production and Transportation Networks.” International Journal of Production Economics 164:351–365.10.1016/j.ijpe.2014.12.016
31. Mukhopadhyay, S. K., and H., Ma. 2009. “Joint Procurement and Production Decisions in Remanufacturing Under Quality and Demand Uncertainty.” International Journal of Production Economics 120:5–17.10.1016/j.ijpe.2008.07.032
32. Ostrosi, E., and S. T., Bi. 2010. “Generalised Design for Optimal Product Configuration.” The International Journal of Advanced Manufacturing Technology 49:13–25.10.1007/s00170-009-2397-9
33. Pezzella, F., G., Morganti, and G., Ciaschetti. 2008. “A Genetic Algorithm for the Flexible Job-shop Scheduling Problem.” Computers & Operations Research 35 (10):3202–3212.10.1016/j.cor.2007.02.014
34. Pimmler, T. U, and S. D., Eppinger. 1994. “Integration analysis of product decompositions.” ASME Design Theory and Methodology Conference. Minneapolis, MN.
35. Qi, Y., and X. B., Wu. 2011. “Low-carbon Technologies Integrated Innovation Strategy Based on Modular Design.” Energy Procedia 5:2509–2515.10.1016/j.egypro.2011.03.431
36. Shaw, K., R., Shankar, and S. S., Yadav. 2012. “Supplier Selection Using fuzzy AHP and Fuzzy Multi-objective Linear Programming for Developing Low Carbon Supply Chain.” Expert Systems with Applications 39 (9):8182–8192.10.1016/j.eswa.2012.01.149
37. Sheu, J. B., Y. H., Chou, and C. C., Hu. 2005. “An Integrated Logistics Operational Model for Green-supply Chain Management.” Transportation Research Part E Logistics & Transportation Review 41 (4):287–313.10.1016/j.tre.2004.07.001
38. So, K. C., and J. S., Song. 1998. “Price, Delivery Time Guarantees and Capacity Selection.” European Journal of Operational Research 111 (1):28–49.10.1016/S0377-2217(97)00314-7
39. Song, Z., and A., Kusiak. 2009. “Optimising Product Configurations with a Data-mining Approach.” International Journal of Production Research 47 (7):1733–1751.10.1080/00207540701644235
40. Song, J. S., and K. M., Lee. 2010. “Development of a Low-carbon Product Design System Based on Embedded GHG Emissions.” Resources, Conservation and Recycling 54 (9):547–556.10.1016/j.resconrec.2009.10.012
41. Stone, R. B., K. L., Wood, and R. H., Crawford. 2000. “A Heuristic Method for Identifying Modules for Product Architectures.” Design Studies 21 (1):5–31.10.1016/S0142-694X(99)00003-4
42. Su, J. C. P., C., Chu, and Y., Wang. 2012. “A Decision Support System to Estimate the Carbon Emission and Cost of Product Designs.” International Journal of Precision Engineering and Manufacturing 13 (7):1037–1045.10.1007/s12541-012-0135-y
43. Teplitz, C. J., 1991. The Learning Curve Deskbook:A Reference Guide to Theory, Calculations and Applications. New York:Quorum Books.
44. Wang, C. H., 2013. “Incorporating Customer Satisfaction into the Decision-making Process of Product Configuration:A fuzzy Kano Perspective.” International Journal of Production Research 51 (22):6651–6662.10.1080/00207543.2013.825742
45. Wang, K., and S. H., Choi. 2014. “A Holonic Approach to Flexible Flow Shop Scheduling Under Stochastic Processing Times.” Computers & Operations Research 43:157–168.10.1016/j.cor.2013.09.013
46. Wang, L., W. K., Ng, and B., Song. 2011. “Extended DCSP Approach on Product Configuration with Cost Estimation.” Concurrent Engineering 19 (2):123–138.10.1177/1063293X11406750
47. Xie, H., P., Henderson, and M., Kernahan. 2005. “Modeling and Solving Engineering Product Configuration Problems by Constraint Satisfaction.” International Journal of Production Research 43 (20):4455–4469.10.1080/00207540500142381
48. Xuanyuan, S. S, Z., Jiang, and L., Patil. 2008. “Multi-objective Optimization of Product Configuration.” In Proceedings of ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2008, 961–968. ASME, New York.
49. Yang, D., and M., Dong. 2013. “Applying Constraint Satisfaction Approach to Solve Product Configuration Problems with Cardinality-based Configuration Rules.” Journal of Intelligent Manufacturing 24:99–111.10.1007/s10845-011-0544-2
50. Yeh, J. Y., and T. H., Wu. 2005. “Solutions for Product Configuration Management:An Empirical Study.” Artificial Intelligence for Engineering Design, Analysis and Manufacturing 19 (1):39–47.
51. Zhou, C. J., Z. H., Lin, and C. T., Liu. 2008. “Customer-driven Product Configuration Optimization for Assemble-to-order Manufacturing Enterprises.” The International Journal of Advanced Manufacturing Technology 38 (1–2):185–194.10.1007/s00170-007-1089-6
52. Zi, P., 2010. “Research of Parasite Design Model in Industrial Design.” Applied Mechanics and Materials 37–38:968–971.10.4028/www.scientific.net/AMM.37-38