Preliminary Investigation into the Identification of Wood Species from Different Locations by Near Infrared Spectroscopy

BioResources

Volumn 10, Issue 4, 2015, Pages 8505-8517

  Yang, Zhong ^a   Liu, Yana ^a   Pang, Xiaoyu ^a   Li, Kang ^a  

^a RESEARCH INSTITUTE OF FORESTRY   (China)

Author keywords

Different locations; Identification; Near infrared spectroscopy; PLS DA; Wood

Indexed keywords

DISCRIMINANT ANALYSIS; INFRARED DEVICES; LEAST SQUARES APPROXIMATIONS; NEAR INFRARED SPECTROSCOPY;

CORRECT GROUP; NIR SPECTRUM; PARTIAL LEAST SQUARES - DISCRIMINANT ANALYSIS; PCA ANALYSIS; TEST SETS; TRAINING SETS; WOOD BLOCKS; WOOD SAMPLES;

WOOD;

DISCRIMINANT ANALYSIS; INFRARED SPECTROSCOPY; SAMPLES; SET; SPECTRA; SQUARES; WOOD SPECIES;

EID: 84984819879     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.10.4.8505-8517     Document Type: Article

References (27)

1. Adedipe, O. E., and Dawson-Andoh, B. (2008). “Predicting moisture content of yellow-poplar (Liriodendron tulipifera L.) veneer using near infrared spectroscopy,” Forest Products Journal 58(4), 425–473.
2. Bächle, H., Zimmer, B., and Wegener, G. (2012). “Classification of thermally modified wood by FT-NIR spectroscopy and SIMCA,” Wood Science and Technology 46(6), 1181–1192. DOI: 10.1007/s00226-012-0481-z
3. Batten, G. (1998). “An appreciation of the contribution of NIR to agriculture,” Journal of Near Infrared Spectroscopy 6(1), 105–114. DOI: 10.1255/jnirs.127
4. Birkett, M. D., and Gambino, M. J. T. (1989). “Estimation of pulp kappa number with near-infrared spectroscopy,” TAPPI Journal 72(9), 193–197.
5. Borga, P., Hämäläinen, M., and Theander, O. (1992). “Correlations between near-infrared spectra of wet-stored timber and storage timber in relation to water quality,” Holzforschung 46(4), 299–303. DOI: 10.1515/hfsg.1992.46.4.299
6. Brunner, M., Eugster, R., Trenka, E., and Bergamin-Strotz, L. (1996). “FT-NIR spectroscopy and wood identification,” Holzforschung 50(2), 130–134. DOI: 10.1515/HFSG.1996.50.2.130
7. Conway, J. M., Norris, K. H., and Bodwell, C. E. (1984). “A new approach for the estimation of body composition: Infrared interactance,” American Journal of Clinical Nutrition 40(6), 1123–1130.
8. Degen, B., and Fladung, M. (2008). “Use of DNA-markers for tracing illegal logging,” Proceedings of the International Workshop Fingerprinting Methods for the Identification of Timber Origins 321, 6–14.
9. Emandi, A., Vasiliu, C. I., Budrugeac, P., and Stamatin, I. (2011). “Quantitative investigation of wood composition by integrated FT-IR and thermogravimetric methods,” Cellulose Chemistry and Technology 45(9–10), 579–584.
10. Flaete, P. O., Haartveit, E. Y., and Vadla, K. (2006). “Near infrared spectroscopy with multivariate statistical modelling as a tool for differentiation of wood from tree species with similar appearance,” New Zealand Journal of Forestry Science 36(2–3), 382–392.
11. st International Convention of Society of Wood Science and Technology, November 10–12, Concepción, Chile.
12. Hein, P. R. G., Lima, J. T., and Chaix, G. (2009). “Robustness of models based on near infrared spectra to predict the basic density in Eucalyptus urophylla wood,” Journal of Near Infrared Spectroscopy 17(3), 141–150. DOI: 10.1255/jnirs.833
13. Hein, P. R. G., Clair, B., Brancheriau, L., and Chaix, G. (2010). “Predicting microfibril angle in Eucalyptus wood from different wood faces and surface qualities using near infrared spectra,” Journal of Near Infrared Spectroscopy 18(6), 455–464. DOI: 10.1255/jnirs.905
14. Hinterstoisser, B., Schwanninger, M., Stefke, B., Stingl, R., and Patzelt, M. (2003). “Surface analysis of chemically and thermally modified wood by FT-NIR,” The First European Conference on Wood Modification, p. 65.
15. Inagaki, T., Schwanninger, M., Kato, R., Kurata, Y., Thanapase, W., Puthson, P., and Tsuchikawa, S. (2012). “Eucalyptus camaldulensis density and fiber length estimated by near-infrared spectroscopy,” Wood Science and Technology 46(1–3), 143–155. DOI: 10.1007/s00226-010-0379-6
16. Kelley, S. S., Rials, T. G., Snell, R., Groom, L. H., and Sluiter, A. (2004). “Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood,” Wood Science and Technology 38(4), 257–276. DOI: 10.1007/s00226-003-0213-5
17. Keppler, F., Harper, D. B., R. Kalin, M., Meier-Augenstein, W., Farmer, N., Davis, S., Schmidt, H. L., Brown, D. M., and Hamilton, J. T. G. (2007). “Stable hydrogen isotope ratios of lignin methoxyl groups as a paleoclimate proxy and constraint of the geographical origin of wood,” New Phytologist 176(3), 600–609. DOI: 10.1111/j.1469-8137.2007.02213.x
18. Osborne, B. G., and Fearn, T. (1998). Near Infrared Spectroscopy in Food Analysis, Longman, Harlow, UK. DOI: 10.1002/9780470027318.a1018
19. Poke, F. S., and Raymond, C. A. (2006). “Predicting extractives, lignin, and cellulose contents using near infrared spectroscopy on solid wood in Eucalyptus globulus,” Journal of Wood Chemistry and Technology 26(2), 187–199. DOI: 10.1080/02773810600732708
20. Rana, R., Muller, G., Naumann, A., and Polle, A. (2008). “Evaluation of the FTIR spectroscopy in combination with principal components analysis (PCA) or cluster analysis as a tool to distinguish beech (Fagus silvatica L.) trees grown at different sites,” Holzforschung 62(5), 530–538. DOI: 10.1515/HF.2008.104
21. Sandak, A., Sandak, J., and Negri, M. (2011). “Relationship between near-infrared (NIR) spectra and the geographical provenance of timber,” Wood Science and Technology 45(1), 35–48. DOI: 10.1007/s00226-010-0313-y
22. Sandberg, K., and Sterley, M. (2009). “Separating Norway spruce heartwood and sapwood in dried condition with near-infrared spectroscopy and multivariate data analysis,” European Journal of Forest Research 128(5), 475–481. DOI: 10.1007/s10342-009-0296-0
23. Schimleck, L. R., Michell, A. J., and Vinden, P. (1996). “Eucalypt wood classification by NIR spectroscopy and principal component analysis,” Appita Journal 49(5), 319–324.
24. Schimleck, L. R., and Evans, R. (2002). “Estimation of microfibril angle of increment cores by near infrared spectroscopy,” IAWA Journal 23(3), 225–234. DOI: 10.1163/22941932-90000300
25. Schwanninger, M., Hinterstoisser, B., Gierlinger, N., Wimmer, R., and Hanger, J. (2004). “Application of Fourier transform near infrared spectroscopy (FT-NIR) to thermally modified wood,” Holz als Roh-und Werkstoff 62(6), 483–485. DOI: 10.1007/s00107-004-0520-z
26. Thumm, A., and Meder, R. (2001). “Stiffness prediction of radiata pine clearwood test pieces using near infrared spectroscopy,” Journal of Near Infrared Spectroscopy 9(2), 117–122. DOI: 10.1255/jnirs.298
27. Via, B. K., Shupe, T. F., Groom, L. H., Stine, M., and So, C. L. (2003). “Multivariate modeling of density, strength and stiffness from near infrared spectra for mature, juvenile and pith wood of longleaf pine (Pinus palustris),” Journal of Near Infrared Spectroscopy 11(5), 365–378. DOI: 10.1255/jnirs.388