Metathesized palm oil polyol for the preparation of improved bio-based rigid and flexible polyurethane foams

Industrial Crops and Products

Volumn 83, Issue , 2016, Pages 568-576

  Pillai, Prasanth K S ^a   Li, Shaojun ^a   Bouzidi, Laziz ^a   Narine, Suresh S ^a  

^a TRENT UNIVERSITY   (Canada)

Author keywords

Flexible foams; Metathesized Palm Oil; Palm Oil; Polyols; Rigid foams

Indexed keywords

ALCOHOLS; CHEMICAL ANALYSIS; COMPRESSIVE STRENGTH; DIFFERENTIAL SCANNING CALORIMETRY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; OIL SHALE; POLYOLS; SCANNING ELECTRON MICROSCOPY; SOYBEAN OIL; THERMOGRAVIMETRIC ANALYSIS; VEGETABLE OILS;

CELLULAR STRUCTURE; DSC(DIFFERENTIAL SCANNING CALORIMETRY); FLEXIBLE FOAMS; FLEXIBLE POLYURETHANES; HIGH THERMAL STABILITY; RIGID FOAMS; TEXTURE ANALYZERS; THERMAL TRANSITIONS;

PALM OIL;

CANOLA; COMPRESSIVE STRENGTH; DEGRADATION; FOAM; PYROLYSIS; SOYBEAN; THERMAL DECOMPOSITION; VEGETABLE OIL;

BRASSICA NAPUS VAR. NAPUS; GLYCINE MAX;

EID: 84982299445     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2015.12.068     Document Type: Article

References (47)

1. Ashida, K., Polyurethane and Related Foams: Chemistry and Technology. 2006, CRC Press.
2. Babb, D.A., Po Lyurethanes from Renewable Resources Synthetic Biodegradable Polymers. 2012, Springer, 315–360.
3. Babb, D.A., Polyurethanes from renewable resources. Rieger, B., Kunkel, A., Coates, G.W., Reichardt, R., Dinjus, E., Zevaco, T.A., (eds.) Synthetic Biodegradable Polymers, 2012, 315–360.
4. Banik, I., Sain, M., Water blown soy polyol-based polyurethane foams of different rigidities. J. Reinf. Plast. Comp. 27:4 (2007), 357–373.
5. Campanella, A., Bonnaillie, L.M., Wool, R.P., Polyurethane foams from soyoil-based polyols. J. Appl. Polym. Sci. 112 (2009), 2567–2578.
6. Chian, K., Gan, L., Development of a rigid polyurethane foam from palm oil. J. Appl. Polym. Sci. 68 (1998), 509–515.
7. Chuayjuljit, S., Sangpakdee, T., Saravari, O., Processing and properties of palm oil-based rigid polyurethane foam. J. Metals Mater. Miner. 17 (2007), 7–23.
8. David, J., Vojtová, L., Bednařík, K., Kučerík, J., Vávrová, M., Jančář, J., Development of novel environmental friendly polyurethane foams. Environ. Chem. Lett. 8 (2010), 381–385.
9. Desroches, M., Escouvois, M., Auvergne, R., Caillol, S., Boutevin, B., From vegetable oils to polyurethanes: synthetic routes to polyols and main industrial products. Polym. Rev. 52 (2012), 38–79.
10. Doyle, E.N., The Development and Use of Polyurethane Products. 1971, McGraw-Hill, New York, NY.
11. Firm, M.R.C.A.C., 2013. Polymer Foam Market By Types (Polyurethane, Polystyrene, Polyvinyl Chloride, Polyolefin, Phenolic, Melamine and Others), Applications (Packaging, Building & Construction, Furniture & Bedding, Automotive, Wind Energy and Others) & Geography—Global Trends & Forecasts to 2018. Markets and Markets http://www.marketsandmarkets.com/PressReleases/polymer-foam.asp.
12. Firm, M.R.C.A.C., 2015. Polyurethane Foam Market by Type (Flexible Foam, Rigid Foam), by End-User Industry (Bedding & Furniture, Building & Construction, Electronics, Automotive, Footwear, Packaging, Others), by Geography—Global Trends & Forecasts to 2020. Markets and Markets http://www.marketsandmarkets.com/PressReleases/polyurethane-foams.asp.
13. Gryglewicz, S., Piechocki, W., Gryglewicz, G., Preparation of polyol esters based on vegetable and animal fats. Bioresour. Technol. 87 (2003), 35–39.
14. Gu, R., Konar, S., Sain, M., Preparation and characterization of sustainable polyurethane foams from soybean oils. J. Am. Oil Chem. Soc. 89 (2012), 2103–2111.
15. Guan, J., Song, Y., Lin, Y., Yin, X., Zuo, M., Zhao, Y., Tao, X., Zheng, Q., Progress in study of non-isocyanate polyurethane. Ind. Eng. Chem. Res. 50 (2011), 6517–6527.
16. Gunstone, F., Vegetable Oils in Food Technology: Composition, Properties and Uses. 2011, John Wiley & Sons.
17. Guo, A., Demydov, D., Zhang, W., Petrovic, Z.S., Polyols and polyurethanes from hydroformylation of soybean oil. J. Polym. Environ. 10 (2002), 49–52.
18. Guo, A., Javni, I., Petrovic, Z., Rigid polyurethane foams based on soybean oil. J. Appl. Polym. Sci. 77 (2000), 467–473.
19. Hu, Y.H., Gao, Y., Wang, D.N., Hu, C.P., Zu, S., Vanoverloop, L., Randall, D., Rigid polyurethane foam prepared from a rape seed oil based polyol. J. Appl. Polym. Sci. 84 (2002), 591–597.
20. Javni, I., Petrović, Z.S., Guo, A., Fuller, R., Thermal stability of polyurethanes based on vegetable oils. J. Appl. Polym. Sci. 77 (2000), 1723–1734.
21. John, J., Bhattacharya, M., Turner, R.B., Characterization of polyurethane foams from soybean oil. J. Appl. Polym. Sci. 86 (2002), 3097–3107.
22. Jung, H., Ryu, S., Kim, W., Lee, Y.B., Choe, K., Kim, S.B., Properties of rigid polyurethane foams blown by HCFC 141B and distilled water. J. Appl. Polym. Sci. 81 (2001), 486–493.
23. Khoe, T.H., Otey, F.H., Frankel, E.N., Rigid urethane foams from hydroxymethylated linseed oil and polyol esters. J. Am. Oil Chem. Soc. 49 (1972), 615–618.
24. Kong, X., Narine, S.S., Physical properties of polyurethane plastic sheets produced from polyols from canola oil. Biomacromolecules 8 (2007), 2203–2209.
25. Lida, H., Sundram, K., Siew, W.L., Aminah, A., Mamot, S., TAG composition and solid fat content of palm oil, sunflower oil, and palm kernel olein blends before and after chemical interesterification. J. Am. Oil Chem. Soc. 79 (2002), 1137–1144.
26. Lin, B., Yang, L., Dai, H., Hou, Q., Zhang, L., Thermal analysis of soybean oil based polyols. J. Therm. Anal. Calorim. 95 (2009), 977–983.
27. More, A.S., Gadenne, B., Alfos, C., Cramail, H., AB type polyaddition route to thermoplastic polyurethanes from fatty acid derivatives. Polym. Chem. 3 (2012), 1594–1605.
28. Narine, S.S., Kong, X., Bouzidi, L., Sporns, P., Physical properties of polyurethanes produced from polyols from seed oils: II. Foams. J. Am. Oil Chem. Soc. 84 (2007), 65–72.
29. Narine, S.S., Yue, J., Kong, X., Production of polyols from canola oil and their chemical identification and physical properties. J. Am. Oil Chem. Soc. 84 (2007), 173–179.
30. Narine, S., Sasidharan Pillai, P.K., Li, S., Bouzidi, L.M., Ali, 2015. Metathesized triacylglycerol polyols derived from palm oil for use in polyurethane applications and their related physical properties. WO Patent WO2015/143568A1.
31. Ong, A., Goh, S., Palm oil: a healthful and cost-effective dietary component. Food Nutr. Bull. 23 (2002), 11–22.
32. Pawlik, H., Prociak, A., Influence of palm oil-based polyol on the properties of flexible polyurethane foams. J. Polym. Environ. 20 (2012), 438–445.
33. Petrović, Z.S., Polyurethanes from vegetable oils. Polym. Rev. 48 (2008), 109–155.
34. Piszczyk, Ł., Strankowski, M., Danowska, M., Hejna, A., Haponiuk, J.T., Rigid polyurethane foams from a polyglycerol-based polyol. Eur. Polym. J. 57 (2014), 143–150.
35. Prasanth K. S. Pillai, Shaojun Li, Bouzidi, L., Narine, A.S.S., 2015. 1-butene metathesized palm oil and its polyol derivatives: structure, chemical composition and physical properties. Submitted to Ind. Crop. Prod.
36. Prociak, A., Pielichowski, J., Sterzyñski, T., Thermal diffusivity of polyurethane foams measured by the modified ångström method. Polym. Eng. Sci. 39 (1999), 1689–1695.
37. Santosa, S.J., Palm oil boom in Indonesia: from plantation to downstream products and biodiesel. CLEAN—Soil, Air, Water 36 (2008), 453–465.
38. Shufen, L., Zhi, J., Kaijun, Y., Shuqin, Y., Chow, W., Studies on the thermal behavior of polyurethanes. Polym. Plast. Technol. 45 (2006), 95–108.
39. Somani, K.P., Kansara, S.S., Patel, N.K., Rakshit, A.K., Castor oil based polyurethane adhesives for wood-to-wood bonding. Int. J. Adhes. Adhes. 23 (2003), 269–275.
40. Szycher, M., Szycher's Handbook of Polyurethanes. 1999, CRC Press.
41. Tan, S., Abraham, T., Ference, D., Macosko, C.W., Rigid polyurethane foams from a soybean oil-based polyol. Polymer 52 (2011), 2840–2846.
42. Tanaka, R., Hirose, S., Hatakeyama, H., Preparation and characterization of polyurethane foams using a palm oil-based polyol. Bioresour. Technol. 99 (2008), 3810–3816.
43. Tate, P.M., Talal, S., Compressive properties of rigid polyurethane foams. Polym. Polym. Compos. 7 (1999), 117–124.
44. Thirumal, M., Khastgir, D., Singha, N.K., Manjunath, B., Naik, Y., Effect of foam density on the properties of water blown rigid polyurethane foam. J. Appl. Polym. Sci. 108 (2008), 1810–1817.
45. Velayutham, T.S., Majid, W.H.A., Ahmad, A.B., Kang, G.Y., Gan, S.N., Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid. Prog. Org. Coat. 66 (2009), 367–371.
46. Zhang, L., Jeon, H.K., Malsam, J., Herrington, R., Macosko, C.W., Substituting soybean oil-based polyol into polyurethane flexible foams. Polymer 48 (2007), 6656–6667.
47. Zlatanic, A., Petrovic, Z.S., Dusek, K., Structure and properties of triolein-based polyurethane networks. Biomacromolecules 3 (2002), 1048–1056.