PEG-assisted hydrothermal synthesis of CoFe 2 O 4 nanoparticles with enhanced selective adsorption properties for different dyes

Applied Surface Science

Volumn 389, Issue , 2016, Pages 1003-1011

  Wu, Xiaofei ^a   Wang, Wei ^a   Li, Feng ^a   Khaimanov, Spartak ^a,b   Tsidaeva, Natalia ^b   Lahoubi, Mahieddine ^c  

^a BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY   (China)

^b NORTH OSSETIAN STATE UNIVERSITY   (Russian Federation)

^c BADJI MOKHTAR UNIVERSITY   (Algeria)

Author keywords

[No Author keywords available]

Indexed keywords

ADSORPTION; AZO DYES; COBALT; COBALT DEPOSITS; DYES; FERRITES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; IONIC LIQUIDS; IRON COMPOUNDS; NANOPARTICLES; PARTICLE SIZE; SATURATION MAGNETIZATION;

ADSORPTION CAPACITIES; ADSORPTION PERFORMANCE; CHARACTERISTIC BANDS; COBALT FERRITE NANOPARTICLES; PSEUDO-SECOND-ORDER KINETIC MODELS; SELECTIVE ADSORBENTS; SELECTIVE ADSORPTION; SINGLE-PHASE SPINEL STRUCTURE;

HYDROTHERMAL SYNTHESIS;

EID: 84981525104     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2016.08.053     Document Type: Article

References (67)

1. [1] Wu, D.L., Zheng, P.W., Chang, P.R., Ma, X.F., Preparation and characterization of magnetic rectorite/iron oxide nanocomposites and its application for the removal of the dyes. Chem. Eng. J. 174 (2011), 489–494.
2. [2] Reddy, D.H.K., Yun, Y.S., Spinel ferrite magnetic adsorbents: alternative future materials for water purification. Coord. Chem. Rev. 315 (2016), 90–111.
3. [3] Wu, X.F., Wang, W., Song, N.N., Yang, X.J., Khaimanov, S., Tsidaeva, N., From nanosphere to nanorod: tuning morphology, structure and performance of cobalt ferrites via Pr3+ doping. Chem. Eng. J. 306 (2016), 382–392.
4. 2 nanomaterial and its use for photocatalytic hydrogen production by methanol/water splitting. Chem. Eng. J. 243 (2014), 272–279.
5. [5] Mittal, A., Malviya, A., Kaur, D., Mittal, J., Kurup, L., Studies on the adsorption kinetics and isotherms for the removal and recovery of Methyl Orange from wastewaters using waste materials. J. Hazard. Mater. 148 (2007), 229–240.
6. [6] Mohan, N., Balasubramanian, N., Ahmed Basha, C., Electrochemical oxidation of textile wastewater and its reuse. J. Hazard. Mater. 147 (2007), 644–651.
7. [7] Kim, S.Y., An, J.Y., Kim, B.W., The effects of reductant and carbon source on the microbial decolorization of azo dyes in an anaerobic sludge process. Dyes Pigm. 76 (2008), 256–263.
8. [8] Rezlescu, N., Rezlescu, E., Popa, P.D., Popovici, E., Doroftei, C., Ignat, M., Preparation and characterization of spinel-type MeFe2O4 (Me = Cu, Cd, Ni and Zn) for catalyst applications. Mater. Chem. Phys. 137 (2013), 922–927.
9. [9] Lan, S., Guo, N., Liu, L., Wu, X., Li, L., Gan, S., Facile preparation of hierarchical hollow structure gamma alumina and a study of its adsorption capacity. Appl. Surf. Sci. 283 (2013), 1032–1040.
10. [10] Bedin, K.C., Martins, A.C., Cazetta, A.L., Pezoti, O., Almeida, V.C., KOH-activated carbon prepared from sucrose spherical carbon: adsorption equilibrium, kinetic and thermodynamic studies for Methylene Blue removal. Chem. Eng. J. 286 (2016), 476–484.
11. 4 nanospheres via a PEG assisted hydrothermal route and their catalytic properties in oxidation of alcohols by periodic acid. Appl. Surf. Sci. 370 (2016), 469–475.
12. [12] Al-Futaisi, A., Jamrah, A., Al-Hanai, R., Aspects of cationic dye molecule adsorption to palygorskite. Desalination 214 (2007), 327–342.
13. [13] Wu, C.H., Adsorption of reactive dye onto carbon nanotubes: equilibrium, kinetics and thermodynamics. J. Hazard. Mater. 144 (2007), 93–100.
14. [14] He, C., Ren, L., Zhu, W., Xu, Y., Qian, X., Removal of mercury from aqueous solution using mesoporous silica nanoparticles modified with polyamide receptor. J. Colloid Interface Sci. 458 (2015), 229–234.
15. 4 . Chem. Eng. J. 158 (2010), 599–607.
16. 4 magnetic nanoparticles for removal of Cu(II) ions. J. Colloid Interface Sci. 283 (2005), 446–451.
17. 4 . Chem. Eng. J. 246 (2014), 88–96.
18. [18] Wu, X., Ding, Z., Song, N., Li, L., Wang, W., Effect of the rare-earth substitution on the structural, magnetic and adsorption properties in cobalt ferrite nanoparticles. Ceram. Int. 42 (2016), 4246–4255.
19. [19] Zhao, X., Wang, W., Zhang, Y.J., Wu, S., Li, F., Ping Liu, J., Synthesis and characterization of gadolinium doped cobalt ferrite nanoparticles with enhanced adsorption capability for Congo Red. Chem. Eng. J. 250 (2014), 164–174.
20. 4 nanoparticles and their application on removal of Congo red. Chem. Eng. J. 242 (2014), 226–233.
21. 4 ferrite and their adsorption capability for Congo red. J. Hazard. Mater. 196 (2011), 342–349.
22. [22] Wu, Z.C., Wang, Z.Z., Liu, J., Yin, J.H., Kuang, S.P., A new porous magnetic chitosan modified by melamine for fast and efficient adsorption of Cu(II) ions. Int. J. Biol. Macromol. 81 (2015), 838–846.
23. [23] Mahmoodi, N.M., Surface modification of magnetic nanoparticle and dye removal from ternary systems. J. Ind. Eng. Chem. 27 (2015), 251–259.
24. [24] Mahmoodi, N.M., Banijamali, M., Noroozi, B., Surface modification and ternary system dye removal ability of manganese ferrite nanoparticle. Fibers Polym. 15 (2014), 1616–1626.
25. [25] Li, D.P., Zhang, Y.R., Zhao, X.X., Zhao, B.X., Magnetic nanoparticles coated by aminoguanidine for selective adsorption of acid dyes from aqueous solution. Chem. Eng. J. 232 (2013), 425–433.
26. [26] Mahmoodi, N.M., Soltani-Gordefaramarzi, S., Sadeghi-Kiakhani, M., Dye removal using modified copper ferrite nanoparticles and RSM analysis environ. Monit. Assess. 185 (2013), 10235–10248.
27. [27] Li, Q.F., Li, Y.F., Li, X., Chen, S., Zhang, S.D., Wang, J.Z., Hou, C., A facile synthesis of superparamagnetic hybrid hollow nanospheres based on monodisperse nickel-zinc ferrite/polyethylene glycol and their electromagnetic, microwave absorbing properties. J. Alloys Compd. 608 (2014), 35–43.
28. 4 nanoparticles synthesized by co-precipitation. Ceram. Int. 41 (2015), 11702–11709.
29. [29] Salunkhe, A.B., Khot, V.M., Phadatare, M.R., Pawar, S.H., Combustion synthesis of cobalt ferrite nanoparticles—influence of fuel to oxidizer ratio. J. Alloys Compd. 514 (2012), 91–96.
30. [30] Ding, Z., Wang, W., Wu, S., Liu, J.P., Synthesis and characterization of Co-Zn ferrite nanoparticles by hydrothermal method: a comparative study. IEEE Trans. Magn., 51, 2015, 2004104.
31. 4 nanoparticles using controlled ammonia vapor diffusion under ultrasonic irradiation. Ind. Eng. Chem. Res. 50 (2011), 3534–3539.
32. 4 (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method. J. Appl. Phys., 117, 2015, 17A328.
33. [33] Dobryszycki, J., Biallozor, S., On some organic inhibitors of zinc corrosion in alkaline media. Corros. Sci. 43 (2001), 1309–1319.
34. [34] Bognitzki, M., Hou, H.Q., Ishaque, M., Frese, T., Hellwig, M., Schwarte, C., Schaper, A., Wendorff, J.H., Greiner, A., Polymer metal, and hybrid nano-and mesotubes by coating degradable polymer template fibers (TUFT process). Adv. Mater. 12 (2000), 637–640.
35. [35] Liu, X.H., Yang, J., Wang, L., yang, X.J., Lu, L.D., Wang, X., An improvement on sol-gel method for preparing ultrafine and crystallized titania powder. Mater. Sci. Eng. A 289 (2000), 241–245.
36. 4 nanoparticles synthesized by PEG-assisted hydrothermal route. J. Alloys Compd. 479 (2009), 49–55.
37. [37] Yang, W., Yu, Y., Wang, L., Yang, C., Li, H., Controlled synthesis and assembly into anisotropic arrays of magnetic cobalt-substituted magnetite nanocubes. Nanoscale 7 (2015), 2877–2882.
38. 4 nanocomposites. Appl. Surf. Sci. 346 (2015), 348–353.
39. [39] Xiang, J., Shen, X., Song, F., Liu, M., One-dimensional NiCuZn ferrite nanostructures: fabrication, structure, and magnetic properties. J. Solid State Chem. 183 (2010), 1239–1244.
40. 4 -graphene hybrid composite for efficient removal of glyphosate from water. Chem. Eng. J. 295 (2016), 391–402.
41. [41] Valiokas, R., Svedhem, S., Svensson, S.C.T., Liedberg, B., Self-assembled monolayers of oligo (ethylene glycol)-terminated and amide group containing alkanethiolates on gold. Langmuir(10), 1999, 3390–3394.
42. [42] Mohamed, M.B., Yehia, M., Cation distribution and magnetic properties of nanocrystalline gallium substituted cobalt ferrite. J. Alloys Compd. 615 (2014), 181–187.
43. 4 ferrite nanoparticles. J. Alloys Compd. 640 (2015), 362–370.
44. [44] Wu, X., Ding, Z., Wang, W., Song, N., Khaimanov, S., Tsidaeva, N., Effect of polyacrylic acid addition on structure, magnetic and adsorption properties of manganese ferrite nanoparticles. Powder Technol. 295 (2016), 59–68.
45. 4 nanoparticles by a modified hydrothermal method. J. Am. Ceram. Soc. 96 (2013), 2245–2251.
46. [46] Jovanović, S., Spreitzer, M., Tramšek, M., Trontelj, Z., Suvorov, D., Effect of oleic acid concentration on the physicochemical properties of cobalt ferrite nanoparticles. J. Phys. Chem. C 118 (2014), 13844–13856.
47. 4 nanoparticles. J. Solid State Chem. 182 (2009), 2423–2429.
48. [48] Carta, D., Mountjoy, G., Navarra, G., Casula, M.F., Loche, D., Marras, S., Corrias, A., X-ray absorption investigation of the formation of cobalt ferrite nanoparticles in an aerogel silica matrix. J. Phys. Chem. C 111 (2007), 6308–6317.
49. 4 (M = Mn, Co, Ni). J. Phys. Chem. C 113 (2009), 8606–8615.
50. [50] Prakash, A., Chandra, S., Bahadur, D., Structural, magnetic, and textural properties of iron oxide-reduced graphene oxide hybrids and their use for the electrochemical detection of chromium. Carbon 50 (2012), 4209–4219.
51. [51] Ghorai, S., Sarkar, A., Raoufi, M., Panda, A.B., Schönherr, H., Pal, S., Enhanced removal of methylene blue and methyl violet dyes from aqueous solution using a nanocomposite of hydrolyzed polyacrylamide grafted xanthan gum and incorporated nanosilica. Appl. Mater. Interfaces 6 (2014), 4766–4777.
52. [52] Liu, X., An, S., Wang, Y., Yang, Q., Zhang, L., Rapid selective separation and recovery of a specific target dye from mixture consisted of different dyes by magnetic Ca-ferrites nanoparticles. Chem. Eng. J. 262 (2015), 517–526.
53. [53] Lagergren, S., About the theory of so-called adsorption of soluble substances. Kungliga Svenska Vetenskapsakademiens Handlingar 24 (1898), 1–39.
54. [54] Ho, Y.S., McKay, G., Pseudo-second order model for sorption processes. Process Biochem. 34 (1999), 451–465.
55. [55] Freundlich, H.M.F., Uber die adsorption in losungen. Z. Phys. Chem. 57 (1906), 385–470.
56. [56] Langmuir, I., The adsorption of gases on plane surfaces of glass, mica and platinum. J. Am. Chem. Soc. 40 (1918), 1361–1403.
57. [57] Wang, Y.Q., Cheng, R.M., Wen, Z., Zhao, L., Investigation on the room-temperature preparation and application of chain-like iron flower and its ramifications in wastewater purification. Chem. Eng. J. 203 (2012), 277–284.
58. 4 (M = Mn, Fe, Co, Ni) spinel ferrites. Chem. Eng. J. 181–182:181 (2012), 72––.
59. [59] Zhai, Y., Zhai, J.F., Zhou, M., Dong, S.J., Ordered magnetic core–manganese oxide shell nanostructures and their application in water treatment. J. Mater. Chem. 19 (2009), 7030–7035.
60. [60] Afkhami, A., Moosavi, R., Adsorptive removal of Congo red a carcinogenic textile dye, from aqueous solutions by maghemite nanoparticles. J. Hazard. Mater. 174 (2010), 398–403.
61. [61] Ghaedi, M., Biyareh, M.N., Kokhdan, S.N., Shamsaldini, S., Sahraei, R., Daneshfar, A., Shahriyar, S., Comparison of the efficiency of palladium and silver nanoparticles loaded on activated carbon and zinc oxide nanorods loaded on activated carbon as new adsorbents for removal of Congo red from aqueous solution: kinetic and isotherm study. Mater. Sci. Eng. C 32 (2012), 725–734.
62. 2 nanotubes. J. Ind. Eng. Chem. 20 (2013), 3081–3088.
63. [63] Rao, V.V.B., Rao, S.R.M., Adsorption studies on treatment of textile dyeing industrial effluent by fly ash. Chem. Eng. J. 116 (2006), 77–84.
64. [64] Tor, A., Cengeloglu, Y., Removal of congo red from aqueous solution by dsorption onto acid activated red mud. J. Hazard. Mater. 138 (2006), 409–415.
65. [65] Vimonses, V., Lei, S.M., Jin, B., Chow, C.W.K., Saint, C., Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materials. Chem. Eng. J. 148 (2009), 354–364.
66. 4 @graphene anocomposite. Chem. Eng. J. 184 (2012), 326–332.
67. 4 nanoparticles. Ceram. Int. 41 (2015), 13624–13629.