50 Years of Cyclotron Development

IEEE Transactions on Nuclear Science

Volumn 63, Issue 2, 2016, Pages 965-991

  Calabretta, L ^a   Seidel, M ^b  

^a INFN LABORATORI NAZIONALI DEL SUD   (Italy)

^b PAUL SCHERRER INSTITUTE   (Switzerland)

Author keywords

Accelerators; cyclotrons; nuclear and plasma sciences; particle

Indexed keywords

PARTICLE ACCELERATORS; PARTICLES (PARTICULATE MATTER); RESEARCH LABORATORIES;

FIXED FIELD ALTERNATING GRADIENT; PLASMA SCIENCE;

CYCLOTRONS;

EID: 84976209206     PISSN: 00189499     EISSN: None     Source Type: Journal    
DOI: 10.1109/TNS.2015.2499238     Document Type: Article

References (85)

1. H. Blosser, "Sectored cyclotrons"," in Proc. PAC 1965, Washington, D.C., USA, pp. 985-995 [Online]. Available: www.jacow.org
2. H. Blosser, "Future cyclotrons," in Proc. AIP Cyclotrons 1972, Vancouver, Canada, pp. 16-32 [Online]. Available: www.jacow.org
3. L. H. Thomas, "The paths of ions in the Cyclotron I. Orbits in the magnetic field," Phys. Rev., vol. 54, pp. 580-588, 1938.
4. E. D. Courant et al., "The strong-focusing synchroton-A new high energy accelerator," Phys. Rev., vol. 88, no. 5, p. 1190, 1952.
5. F. Heyn and K. T. Khoe, "Operation of a radial sector fixed-frequency proton cyclotron," Rev. Sci. Instrum., vol. 29, p. 662, 1958.
6. M. Craddock, "Eighty years of cyclotrons," in Proc. XIX Int. Conf. Cyclotron Appl., Lanzhou, China, 2010, pp. 1-8 [Online]. Available: www.jacow.org
7. "Directory of cyclotrons used for radioinuclide production in member states," International Atomic Energy Agency, IAEA-DCRP/2006, [Online]. Available: www.naweb.iaea.org/napc/iachem/cyclotrons/PDF/DCRP.pdf
8. Particle Therapy CoOperative Group, Accessed June 2015. [Online]. Available: www.ptcog.com
9. R. P. Haddock et al., "H-cyclotron meson factory," in Proc. Int. Conf. Sector-Focused Cyc. Meson Factories, CERN 63-19, Geneva, Switzerland, 1963, pp. 340-350 [Online]. Available: www.jacow.org
10. H. A. Willax, "Present status of the 590 MeV ring cyclotron of SIN," IEEE Trans. Nucl. Sci., vol. NS-20, no. 3, pp. 202-206, Jun. 1973.
11. F. T. Cole et al., "Use of a 10 GeV high-intensity accelerator as a pion factory," in Proc. Int. Conf. Sector-Focused Cyc. Meson Factories, CERN 63-19, Geneva, Switzerland, 1963, pp. 351-355 [Online]. Available: www.jacow.org
12. F. M. Russel et al., "A strong-focusing cyclotron with separated orbits," in Proc. Int. Conf. Sector-Focused Cyc. Meson Factories, CERN 63-19, Geneva, Switzerland, 1963, pp. 377-389 [Online]. Available: www.jacow.org
13. Y. Kenney and Garren, "Computational procedures in the adjustment of a cyclotron magnetic field by trim coils," Nucl. Instrum. Meth., vol. 18, no. 2, pp. 323-326, 1962.
14. N. F. Verster and H. L. Hagedoorn, "Computers programs for an AVF cyclotron," Nuc. Instrum. Meth. lS, vol. 18-l9, pp. 327-335, 1962.
15. A. A. Garren and L. Smith, "Diagnosis and correction of beam behavior in an isochronous cyclotron," in Proc. Int. Conf. Sector-Focused Cyc. Meson Factories, CERN 63-19, Geneva, Switzerland, 1963, pp. 18-23 [Online]. Available: www.jacow.org
16. C. Baumgarten et al., "Isochronism of the ACCEL 250 MeV medical proton cyclotron," Nucl. Instrum. Meth. A, vol. 570, pp. 10-14, 2007.
17. L. Ah-Hot et al., "Injection and stripping of a heavy ion beam in the Orsay cyclotron," in Proc. V Int. Cycl. Conf., Butterworts, Oxford, U.K., 1969, pp. 646-657 [Online]. Available: www.jacow.org
18. G. Berger et al., "Acceleration and mass-separation of radioactive ion beams in an isochronous cyclotron," in Proc. IEEE PAC 1991, San Francisco, CA, USA, pp. 2610-2612.
19. D. A. Lind et al., "General design features of the University of Colorado 52-inch cyclotron," in Proc. NIM 18-19, 1962, pp. 62-65.
20. G. Dutto, "The TRIUMF 520 MeV cyclotron: Recent and future developments," in Proc. XIII Int. Conf. Cyclotron Appl., World Sci., Vancouver, Canada, 1992, pp. 138-142.
21. C. Baumgarten, "Transverse-longitudinal coupling by space charge in cyclotrons," Phys. Rev. ST Accel. Beams, vol. 14, p. 114201, 2011.
22. M. Seidel et al., "Production of a 1.3 MW proton beam at PSI," in Proc. IPAC 2010, Kyoto, Japan, pp. 1309-1313 [Online]. Available: www.jacow.org
23. P. F. Rohwer and S. Schneider, "Beam injection and extraction for the separated-sector cyclotron of the National Accelerator Centre," in Proc. IX Int. Cyclotron Conf. App, Les Ed. Phis., Caen, France, 1981, pp. 481-483 [Online]. Available: www.jacow.org
24. J. L. Belmont and J. L. Pabot, "Study of axial injection for the Grenoble cyclotron," IEEE Trans. Nucl. Sci., vol. NS-13, no. 4, pp. 191-193, Aug. 1966.
25. R. Geller, "Electron cyclotron resonance (E.C.R.) multiply charged ion sources," IEEE Trans. Nucl. Sci., vol. NS-26, no. 2, pp. 2119-2127, Apr. 1978.
26. S. Gammino and G. Ciavola, "The role of microwave frequency on the high charge states buildup in the ECR ion sources," Plasma Sources Sci. Tech., vol. 5, p. 19, 1996.
27. R. A. Bark and J. C. Cornell, "A Radioactive-Ion Beam Facility at iThemba Labs," iThemba Laboratory, Cape Town, South Africa, Internal Report, RIB-PUB-03, 2013. [Online]. Available: http://www.tlabs.ac.za/wp-content/uploads/2013/08/Proposal-RIBPUB03--06Nov2013.pdf
28. I. Tanihata et al., "Measurements of interaction cross sections and nuclear radii in the light p-shell region," Phys. Rev. Lett., vol. 55, p. 2676, 1985.
29. P. G. Hansen and B. Jonson, "The neutron halo of extremely neutronrich nuclei," Europhys. Lett., vol. 4, pp. 409-414, 1987.
30. P. W. Schmor, "Initial commissioning of the Isac Rib Facility," in Proc. IEEE PAC 1999, New York, NY, USA, pp. 508-512.
31. R. Anne and A. C. Mueller, ""LISE 3: A magnetic spectrometer-Wien filter combination for secondary radioactive beam production," in Proc. NIM B70, 1992, pp. 276-285.
32. A. Joubert et al., "The SISSI Project: An intense secondary ion source using superconducting solenoid lenses," in Proc. IEEE PAC 1991, San Francisco, CA, USA, pp. 594-597.
33. M. Lieuvin et al., "Status of spiral, the radioactive beam project at GANIL," in Proc. XIV Int. Conf. Cyclotron Appl., Cape Town, South Africa, 1995, pp. 651-658 [Online]. Available: www.jacow.org
34. P. Bertrand et al., "Improvement of the mass separation power of a cyclotron by using the vertical selection method," in Proc. XVII Int. Conf. Cyclotron Appl., Tokyo, Japan, 2004, pp. 130-132 [Online]. Available: www.jacow.org
35. A. Goto et al., "Isochronous fields for RIKEN ring cyclotron," in Proc. XI Int. Conf. Cyclotron Appl., Tokyo, Japan, 1986, pp. 292-295 [Online]. Available: www.jacow.org
36. Y. Yano et al., "RIKEN RI beam factory project," in Proc. XIV Int. Conf. Cyclotron Appl., Cape Town, South Africa, 1995, pp. 590-597 [Online]. Available: www.jacow.org
37. I. V. Kalagin et al., "Status of the FLNR JINR cyclotrons," in Proc. PAC 2009, Vancouver, Canada, pp. 5011-5013 [Online]. Available: www.jacow.org
38. J. M. Ormrod et al., "The Chalk River heavy ion superconducting cyclotron," IEEE Trans. Nucl. Sci., vol. NS-22, no. 3, pp. 1647-1650, Jun. 1975.
39. S. Gales, "AGOR-A superconducting cyclotron for light and heavy ions," in Proc. XI Int. Conf. Cyclotron Appl., Tokyo, Japan, 1986, pp. 184-190 [Online]. Available: www.jacow.org
40. F. G. Resmini et al., "Final design of the magnetic field for the K-800 superconducting cyclotron at MSU," IEEE Trans. Nucl. Sci., vol. NS-28, no. 3, pp. 2749-2751, Jun. 1971.
41. S. Austin, private communication, May 2015.
42. P. S. Miller et al., "Magnetic field measurements in the MSU 500 MeV superconducting cyclotron," IEEE Trans. Nucl. Sci., vol. NS-26, no. 2, pp. 2111-2113, Apr. 1979.
43. M. M. Gordon, "Computation of closed orbits and basic focusing properties for sector-focused cyclotrons and the design of CYCLOPS," Part. Accel., vol. 13, pp. 39-62, 1984.
44. H. Blosser and F. Resmini, "Progress report on the 500 MeV superconducting cyclotron," IEEE Trans. Nucl. Sci., vol. NS-26, no. 3, pp. 3653-3658, Jun. 1979.
45. E. Acerbi et al., "The Milan Superconducting Cyclotron Project," IEEE Trans. Nucl. Sci., vol. NS-28, no. 3, pp. 2095-2097, Jun. 1981.
46. G. Bellomo and F. Resmini, "Method for minimizing trim coil power requirements in superconducting cyclotrons," IEEE Trans. Nucl. Sci., vol. NS-26, no. 2, pp. 2095-2100, Apr. 1979.
47. D. J. Morrissey et al., "Commissioning the A1900 projectile fragment separator," Nucl. Instrum. Meth. B., vol. 204, p. 90, 2003.
48. B. M. Sherril et al., "The A1200 projectile fragment separator," Nucl. Instrum. Meth. B., vol. 2, no. 56-57, pp. 1106-1110, 1991.
49. F. Marti et al., "Stopping of energetic radioactive ions using cyclotron principles," in Proc. XVIII Int. Conf. Cyclotron Appl., Giardini Naxos, Italy, 2007, pp. 487-492 [Online]. Available: www.jacow.org
50. H. G. Blosser, "Superconducting cyclotron facility for neutron therapy," in Proc. X Int. IEEE Conf. Cyclotron Appl., East Lansing, MI, USA, 1984, p. 431 [Online]. Available: www.jacow.org
51. A. Geisler et al., "Status report of the Accel 250 Mev medical cyclotron," in Proc. XVII Int. Conf. Cyclotron Appl., Tokyo, Japan, 2004, pp. 178-182 [Online]. Available: www.jacow.org
52. J. M. Schippers et al., "The SC cyclotron and the beam lines of PSI's new protontherapy facility PROSCAN," Nucl. Instrum. Meth. B., vol. 261, pp. 773-776, 2007.
53. H. Okuno et al., "Hardware commissioning of the RIKEN superconducting ring cyclotron," in Proc. XVIII Int. Conf. Cyclotron Appl., Giardini Naxos, Italy, 2007, pp. 18-20 [Online]. Available: www.jacow.org
54. V. Bechtold et al., "Industrial applications of the Karlsruhe compact cyclotron," in Proc. XI Int. Conf. Cyclotron Appl., Tokyo, Japan, 1986, pp. 593-596 [Online]. Available: www.jacow.org, Ionics Publishing Company Ltd.
55. M. F. Stroosnijder and K. Abbas, "Thin layer activation for materials Research & Development at IAM of the European Commission," in Proc. XV Int. Conf. Cyclotron Appl., IoP, Caen, France, 1998, pp. 52-57 [Online]. Available: www.jacow.org
56. B. N. Gikal et al., "FLNR heavy ion cyclotrons for investigation in the field of condensed matter physics industrial applications," in Proc. RUPAC2012, Saint Petersburg, Russia, pp. 172-175.
57. R. Ladbury et al., "Performance of the high-energy Single-Event Effects Test Facility (SEETF) at Michigan State University's National Superconducting Cyclotron Laboratory (NSCL)," IEEE Trans. Nucl. Sci., vol. 51, no. 6, pp. 3664-3668, Dec. 2004.
58. T. Abe et al., "Plant breeding using the ion beam irradiation in RIKEN," in Proc. XVIII Int. Conf. Cyclotron Appl., Giardini Naxos, Italy, 2007, pp. 222-224 [Online]. Available: www.jacow.org
59. J. Alonso, "Relevance of IsoDAR and DAE ALUS to medical radioisotope production," presented at the Workshop High Power Sources Targets Anti-Neutrino Prod., Erice, Italy, Oct. 30-Nov. 3, 2012, arXiv.org nucl-ex arXiv:1209.4925.
60. P. W. Schmor, "Review of cyclotrons used in the production of radioisotopes for biomedical applications," in Proc. XIX Int. Conf. Cyclotron Appl., Lanzhou, China, 2010, pp. 419-424 [Online]. Available: www. jacow.org
61. International Atomic Energy Agency, Vienna, Austria, "Cyclotron produced radionuclides: Physical characteristics and production methods," Technical Reports Series No. 468, 2009.
62. M. Cinausero, "The SPES project at LNL," ACTA PHYSICA POLONICA B, vol. 40, pp. 821-831, 2009.
63. D. Schlyer, private communication, May 2015.
64. L. Garcia-Tabares, "Superconducting compact cyclotrons for isotope production," presented at the Academia-Industry Matching Event, Madrid, Spain, May 27-28, 2013 [Online]. Available: indico. cern.ch/event/234471/session/2/contribution/14/attachments/391 972/545111/Garcia-Tabares.pdf
65. L. Calabretta et al., "Design features of a 300 AMeV superconducting cyclotron for hadron therapy," in Proc. PAC 2009, Vancouver, Canada, pp. 1306-1308 [Online]. Available: www.jacow.org
66. Y. Jongen et al., "IBA-JINR 400 MeV/u superconducting cyclotron for hadron therapy," in Proc. XIX Int. Conf. Cyclotron Appl., Lanzhou, China, 2010, pp. 404-409 [Online]. Available: www.jacow.org
67. H. Blosser and X. Wu, "Compact superconducting synchrocyclotron systems for proton therapy," Nucl. Instrum. Meth., vol. B40-41, pp. 1326-1330, 1989.
68. W. Kleeven et al., "The IBA superconducting synchrocyclotron project S2C2," in Proc. XX Int. Conf. Cyclotron Appl., Vancouver, Canada, 2013, pp. 115-119 [Online]. Available: www.jacow.org
69. T. Ohkawa, "FFAG electron cyclotron," Phys. Rev., vol. 100, p. 1247, 1955, presented at the Phys. Soc. Japan Symp. Nucl. Phys., Tokyo, Japan, 1953.
70. A. A. Kolomensky, V. A. Petukhov, M. Rabinovich, "Ring Phasotron new charged particle accelerator," PRIBORY I TEKHNIKA EKSPERIMENTA, vol. 2, p. 26, 1956.
71. K. R. Symon et al., "Fixed-field alternating-gradient particle accelerator," Phys. Rev., vol. 103, pp. 1837-1859, 1956.
72. M. Aiba et al., "Development of a FFAG proton synchrotron," in Proc. EPAC 2000, Vienna, Austria, pp. 581-583 [Online]. Available: www. jacow.org
73. C. Johnstone et al., "Fixed field circular accelerator designs," in Proc. IEEE PAC, New York, NY, USA, 1999, pp. 3068-3070 [Online]. Available: www.jacow.org
74. R. Edgecock et al., "The EMMA non-scaling FFAG," in Proc. IPAC, Kyoto, Japan, 2010, pp. 4266-4268 [Online]. Available: www.jacow.org
75. W. Joho, "High intensity problems in cyclotrons," in Proc. IX Int. Conf. Cyclotron Appl., Caen, France, 1981, pp. 337-347 [Online]. Available: www.jacow.org, Les Edition de Phisique
76. C. Rubbia et al., "Conceptual design of a fast neutron operated a high power energy amplifier," Geneva, Switzerland, CERN/AT/95-44(ET), 1995.
77. P. McIntyre et al., "Strong-focusing cyclotron-high-current applications," in Proc. IPAC, New Orleans, LA, USA, 2012, pp. 436-438 [Online]. Available: www.jacow.org
78. A. Cazan et al., "Commissioning of the first separated orbit cyclotron triton," in Proc. XV Int. Conf. Cyclotron Appl., IoP, Caen, France, 1998, pp. 323-326 [Online]. Available: www.jacow.org
79. L. Calabretta et al., "High Intensity Proton Beams from Cyclotrons for H," in Proc. IEEE PAC 1999, New York, NY, USA, pp. 3288-3290.
80. L. Calabretta et al., "High power cyclotrons for neutrino experiments," in Proc. IPAC, Dresden, Denmark, 2014, pp. 788-790 [Online]. Available: www.jacow.org
81. J. J. Yang et al., "Beam dynamics simulation for the high intensity DAE ALUS cyclotrons," Nucl. Instrum. Meth. In Phys. Res. Sec. A., vol. 704, pp. 84-91, 2013.
82. P. Mandrillon et al., "Cyclotrons for ADS," presented at the Thorium Energy Conf., CERN, Geneva, Switzerland, 2013 [Online]. Available: https://indico.cern.ch/event/222140/contributions.
83. T. W. Koeth, "Undergraduate education with the Rutgers 12-inch cyclotron," CAARI 2014 Phys. Proc., vol. 66, pp. 622-631, 2015.
84. M. Yuly et al., "The Houghton College cyclotron: A tool for educating undergraduates," in Proc. XX Int. Conf. Cyclotron Appl., Vancouver, Canada, 2013, pp. 286-290 [Online]. Available: www.jacow.org
85. Ch Wolf et al., "COLUMBUS-A small cyclotron for school and teaching purposes," in Proc. XX Int. Conf. Cyclotron Appl., Vancouver, Canada, 2013, pp. 296-298 [Online]. Available: www.jacow.org