Water-Repellent Approaches for 3-D Printed Internal Passages

Materials and Manufacturing Processes

Volumn 31, Issue 9, 2016, Pages 1162-1170

  Milionis, A ^a   Noyes, C ^a   Loth, E ^a   Bayer, I S ^a,b   Lichtenberger, A W ^a   Stathopoulos, V N ^c   Vourdas, N ^c  

^a University of Virginia   (United States)

^b ISTITUTO ITALIANO DI TECNOLOGIA   (Italy)

^c Technological Educational Institution of Sterea Ellada Department of Automation Engineering   (Greece)

Author keywords

3 D printing; ABS; Heat exchanger; Reactive ion etching; Superhydrophobic; Vapor deposition

Indexed keywords

CHEMICAL INDUSTRY; COATINGS; DEPOSITION; HEAT EXCHANGERS; HYDROPHOBICITY; RUBBER; SCANNING ELECTRON MICROSCOPY; STYRENE; SURFACE CHEMISTRY; SURFACE ROUGHNESS; VAPOR DEPOSITION;

3-D PRINTING; ACRYLONITRILE BUTADIENE STYRENE; COLLOIDAL DISPERSION; HYDROPHOBIC SURFACES; NANO-COMPOSITE LAYERS; POLYTETRAFLUOROETHYLENE (PTFE); SUPERHYDROPHOBIC; THREEDIMENSIONAL (3-D);

REACTIVE ION ETCHING;

EID: 84971539884     PISSN: 10426914     EISSN: 15322475     Source Type: Journal    
DOI: 10.1080/10426914.2015.1059443     Document Type: Article

References (37)

1. Van de Ven, J.D.; Li, P.Y. Liquid piston gas compression. Applied Energy 2009, 86, 2183-2191.
2. Zhang, L.W.; Balachandar, S.; Tafti, D.K.; Najjar, F.M. Heat transfer enhancement mechanisms in inline and staggered parallel-plate fin heat exchangers. International Journal of Heat and Mass Transfer 1997, 40, 2307-2325.
3. Zhang, C.; Yan, B.; Wieberdink, J.; Li, P.Y.; Van de Ven, J.D.; Loth, E.; Simon, T.W. Thermal analysis of a compressor for application to compressed air energy storage. Applied Thermal Engineering 2014, 73, 1402-1411.
4. Singh, R. Three dimensional printing for casting applications: a state of art review and future perspectives. Advanced Materials Research 2009, 83-86, 342-349.
5. Vaezi, M.; Seitz, H.; Yang, S. A review on 3D micro-additive manufacturing technologies. International Journal of Advanced Manufacturing Technology 2013, 67, 1721-1754.
6. Bak, D. Rapid prototyping or rapid production?3D printing processes move industry towards the latter. Assembly Automation 2003, 23, 340-345.
7. Drummer, D.; Cifuentes-Cuellar, S.; Rietzel, D. Suitability of PLA/TCP for fused deposition modeling. Rapid Prototyping Journal 2012, 18, 500-507.
8. Hutmacher, D.W.; Schantz, T.; Zein, I.; Ng, K.W.; Teoh, S.H.; Tan, K.C. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. Journal of Biomedical Materials Research 2001, 55, 203-216.
9. Leigh, S.J.; Bradley, R.J.; Purssell, C.P.; Billson, D.R.; Hutchins, D.A. A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One 2012. doi:10.1371/journal.pone.0049365.
10. Garcia, C.R.; Correa, J.; Espalin, D.; Barton, J.H.; Rumpf, R.C.; Wicker, R.; Gonzalez, V. 3D printing of anisotropic metamaterials. Progress in Electromagnetics Research Letters 2012, 34, 75-82.
11. Zhang, C.; Shirazi, F.A.; Yan, B.; Simon, T.W.; Li, P.L.; Van den Ven, J. Design of an interrupted-plate heat exchanger used in a liquid-piston compression chamber for compressed air energy storage. In Proceedings of the ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, USA, July 14-19, 2013.
12. Milionis, A.; Ruffilli, R.; Bayer, I.S. Superhydrophobic nano-composites from biodegradable thermoplastic starch composites (Mater-Bi®), hydrophobic nano-silica and lycopodium spores. RSC Advances 2014, 4, 34395-34404.
13. Milionis, A.; Giannuzzi, R.; Bayer, I.S.; Papadopoulou, E.L.; Ruffilli, R.; Manca, M. Self-cleaning organic/inorganic photo-sensors. ACS Applied Materials & Interfaces 2013, 5, 7139-7145.
14. Milionis, A.; Fragouli, D.; Martiradonna, L.; Anyfantis, G.C.; Cozzoli, P.D.; Bayer, I.S. Spatially controlled surface energy traps on superhydrophobic surfaces. ACS Applied Materials & Interfaces 2014, 6, 1036-1043.
15. Davis, A.; Yeong, Y.H.; Steele, A.; Bayer, I.S.; Loth, E. Superhydrophobic nanocomposite surface topography and ice adhesion. ACS Applied Materials & Interfaces 2014, 6, 9272-9279.
16. Kok, M.; Young, T.M. The evaluation of hierarchical structured superhydrophobic coatings for the alleviation of insect residue to aircraft laminar flow surfaces. Applied Surface Science 2014, 314, 1053-1062.
17. Cho, Y.S.; Ahn, S.H.; Lee, S.H. Fabrication and analysis of PMMA, ABS, PS, and PC superhydrophobic surfaces using the spray method. Journal of the Korean Physical Society 2013, 63, 218-224.
18. Sunder, J.M.; Kapole, S.A.; Deshpande, S. Super Hydro-phobic Coating. Patent US20140208978.
19. Wang, X.; Cai, X.; Guo, Q.; Zhang, T.; Kobe, B.; Yang, J. i3DP, a robust 3D printing approach enabling genetic post-printing surface modification. Chemical Communications 2013, 49, 10064-10066.
20. Vourdas, N.; Tserepi, A.; Stathopoulos, V.N. Reversible pressure-induced switching of droplet mobility after impingement on porous surface media. Applied Physics Letters 2013, 103, 111602.
21. Vourdas, N.; Stathopoulos, V.N. Droplet actuation and droplet mobility manipulation on porous media by means of backpressure control. Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech Washington, D.C., USA, June 15-18, 2014.
22. Ahn, S.H.; Montero, M.; Odell, D.; Roundy, S.; Wright, P.K. Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyping Journal 2002, 8, 248-257.
23. Teixeira, L.A.C.; Santini, M.C. Surface conditioning of ABS for metallization without the use of chromium baths. Journal of Materials Processing Technology 2005, 170, 37-41.
24. Vourdas, N.; Tserepi, A.; Gogolides, E. Nanotextured super-hydrophobic transparent poly (methyl methacrylate) surfaces using high-density plasma processing. Nanotechnol-ogy 2007, 18, 125304.
25. Megallon-Cacho, L.; Perez-Bueno, J.J.; Vong-Meas, Y.; Stremsdoerfer, G.; Espinoza-Beltran, F.J. Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process. Surface and Coatings Technology 2011, 206, 1410-1415.
26. McCullough, E.J.; Yadavalli, V.K. Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices. Journal of Materials Processing Technology 2013, 213, 947-954.
27. Cortese, B.; D'Amone, S.; Manca, M.; Viola, I.; Cingolani, R.; Gigli, G. Superhydrophobicity due to hierarchical scale roughness of PDMS surfaces. Langmuir 2008, 24, 2712-2718.
28. Yan, Y.H.; Chan-Park, M.B.; Yue, C.Y. CF4 plasma treatment of poly(dimethylsiloxane): effect of fillers and its application to high-aspect-ratio UV embossing. Langmuir 2005, 21, 8905-8912.
29. Manca, M.; Cortese, B.; Viola, I.; Arico, A.S.; Cingolani, R.; Gigli, G. Influence of chemistry and topology effects on superhydrophobic CF4-plasma-treated poly(dimethylsilox-ane) (PDMS). Langmuir 2008, 24, 1833-1843.
30. Hopkins, J.; Badyal, J.P.S. CF4 plasma treatment of asymmetric polysulfone membranes. Langmuir 1996, 12, 3666-3670.
31. Woodward, I.; Schofield, W.C.E.; Roucoules, V.; Badyal, J.P.S. Super-hydrophobic surfaces produced by plasma fluorination of polybutadiene films. Langmuir 2003, 19, 3432-3438.
32. Shieh, J.; Hou, F.J.; Chen, Y.C.; Chen, H.M.; Yang, S.P.; Cheng, C.C.; Chen, H.L. Robust airlike superhydrophobic surfaces. Advanced Materials 2010, 22, 597-601.
33. Tropmann, A.; Tanguy, L.; Koltay, P.; Zengerle, R.; Riegger, L. Completely superhydrophobic PDMS surfaces for micro-fluidics. Langmuir 2012, 28, 8292-8295.
34. Cassie, A.B.D.; Baxter, S. Wettability of porous surfaces. Transactions of the Faraday Society 1944, 40, 546-551.
35. Steele, A.; Bayer, I.; Cannon, A.; King, W.; Loth, E. Conformal ZnO nanocomposite coatings on micro-patterned surfaces for superhydrophobicity, Thin Solid Films, 2010, 518, 5426-5431.
36. Milionis, A.; Martiradonna, L.; Anyfantis, G.C.; Cozzoli, P.D.; Bayer, I.S.; Fragouli, D.; Athanassiou, A. Control of the water adhesion on hydrophobic micropillars by spray coating technique. Colloid and Polymer Science 2013, 291, 401-407.
37. Bayer, I.S.; Brandi, F.; Cingolani, R.; Athanassiou, A. Modification of wetting properties of laser-textured surfaces by depositing triboelectrically charged Teflon particles. Colloid and Polymer Science 2013, 291, 367-373.