Guidelines for Risk Based Process Safety

Guidelines for Risk Based Process Safety

Volumn , Issue , 2010, Pages

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84970946043     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470925119     Document Type: Book

References (133)

1. Feigenbaum, A. V., Total Quality Control, McGraw-Hill, Inc., New York, New York, 1983.
2. Center for Chemical Process Safety, "Chemical Process Safety Management-A Challenge to Commitment," 1988.
3. Center for Chemical Process Safety., Guidelines for Technical Management of Chemical Process Safety, American Institute of Chemical Engineers, New York, New York, 1989.
4. Center for Chemical Process Safety, Plant Guidelines for Technical Management of Chemical Process Safety, American Institute of Chemical Engineers, New York, New York, 1992 (and revised edition, 1995).
5. Center for Chemical Process Safety., Guidelines for Auditing Process Safety Management Systems, American Institute of Chemical Engineers, New York, New York, 1993.
6. Center for Chemical Process Safety., Guidelines for Implementing Process Safety Management Systems, American Institute of Chemical Engineers, New York, New York, 1994.
7. Center for Chemical Process Safety., Guidelines for Integrating Process Safety Management, Environment, Safety, Health, and Quality, American Institute of Chemical Engineers, New York, New York, 1996.
8. ProSmart-The Tool You Need to Improve Process Safety, Center for Chemical Process Safety, American Institute of Chemical Engineers, New York, 2001, available at www.aiche.org/ccps.
9. Evaluating Process Safety in the Chemical Industry-A Users' Guide to Quantitative Risk Assessment., Center for Chemical Process Safety, New York, 2004.
10. Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.1 19) US. Occupational Safety and Health Administration, May 1992, available at www.osha.gov.
11. Accidental Release Prevention Requirements: Risk Management Programs Under Clean Air Act Section 112(r)(7), 40 CFR 68, U.S. Environmental Protection Agency, June 20, 1996, Fed. Reg. Vol. 61 [31667-317301, available at www.epa.gov.
12. Jones., David, 2001.
13. Schein, E.H., Organizational Culture and Leadership, 2004.
14. Hopkins, Andrew, Lessons From Longford, CCH Australia Limited, 2000.
15. UK Department of Energy, The Public Inquiry Into the Piper Alpha Disaster (2 Vol.), London: HMSO, ISBN 0101 13102,1990.
16. Weick, Karl E. and Sutcliffe, Kathleen M., Managing the Unexpected, Jossey-Bass, 2001.
17. Jones, D. and Kadri, S., "Nurturing a Strong Process Safety Culture," 20th Annual CCPS International Conference, -AIChE Spring Meeting, Atlanta, GA, April 2005.
18. Center for Chemical Process Safety, "Building Process Safety Culture: Tools to Enhance Process Safety Performance,'' http:Nwww.aiche.org/CCPS/ PSCulture.aspx.
19. Frank, W. L., "Essential Elements of a Sound Safety Culture," AIChE, Process Plant Safety Symposium, Atlanta, GA, April 2005.
20. UK Health and Safety Executive, Safety Culture: A Review of the Literature, HSU2002/25,2002.
21. Columbia Accident Investigation Board Report, U.S. Government Printing Office, 2003.
22. Combustible Dust Fire and Explosions at CTA Acoustics, Inc. Corbin, Kentucky February 20,2003;
23. U.S. Chemical Safety and Hazard Investigation Board, February 15,2005. http://www.csb.gov/index.cfm?fold~compl~~-investigations&pag~info&lN V-ID=35
24. American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. www.api.org
25. American Chemistry Council 1300 Wilson Blvd., Arlington, VA 22209. www.americanchernistry.com
26. IS0 14001-Environmental Management System, International Organization for Standardization (ISO), Geneva, Switzerland. www.iso.org/iso/en/iso9000-14000/index.html
27. OHSAS 18001-International Occupational Health and Safety Management System. www.ohsas-18001 -occupational-health-and-safety.com/
28. Organization for Economic Cooperation and Development-Guiding Principles on Chemical Accident Prevention, Preparedness, and Response, 2nd edition, 2003
29. Organisation for Economic Co-Operation and Development, Paris, 2003. www2.oecd.org/ guidingprinciples/index.asp
30. American National Standards Institute, 25 West 43rd Street, New York, NY 10036. www.ansi.org
31. American Society of Mechanical Engineers, Three Park Avenue, New York, NY 100 16. www.asme.org
32. The Chlorine Institute, 1300 Wilson Blvd., Arlington, VA 22209, www.chlorineinstitute.org
33. The Instrumentation, Systems, and Automation Society/International Electrotechnical Commission, 67 Alexander Drive, Research Triangle Park, NC 27709. www.isa.org
34. National Fire Protection Association, 1 Batterymarch Park, Quincy, Massachusetts, 021 69. www.nfpa.org
35. Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.1 19)
36. US. Occupational Safey and Health Administration, May 1992. www.osha.gov
37. Section 5(a)(I)-General Duty Clause, Occupational Safety and Health Act of 1970, Public Law 91-5%,29 USC 654, December 29,1970. www.osha.gov
38. Accidental Release Prevention Requirements: Risk Management Programs Under Clean Air Act Section 112(r)(7), 40 CFR 68, U.S. Environmental Protection Agency, June 20,1996 Fed. Reg. Vol. 6 1 [3 1667-3 17301. www.epa.gov
39. Clean Air Act Section 1 12(r)( 1)-Prevention of Accidental Releases-Purpose and general duty, Public Law No. 101-549, November 1990. www.epa.gov
40. California Accidental Release Program (CalARP) Regulation, CCR Title 19, Division 2-Oflice of Emergency Services, Chapter 4.5, June 28, 2004. www.oes.ca.gov
41. Toxic Catastrophe Prevention Act (TCPA), New Jersey Department of Environmental Protection Bureau of Chemical Release Information and Prevention, N.J.A.C. 7:31 Consolidated Rule Document, April 17, 2006. www.nj.gov/dep
42. Contra Costa County Industrial Safety Ordinance. www.co.contra-costa.ca.us/
43. Extremely Hazardous Substances Risk Management Act, Regulation 1201, Accidental Release Prevention Regulation, Delaware Department of Natural Resources and Environmental Control, March 11, 2006. www.dnrec.delaware.gov/
44. Chemical Accident Prevention Program (CAPP), Nevada Division of Environmental Protection, NRS 459.380, February 15, 2005. http://ndep.nv.gov/bapc/capp/
45. Australian National Standard for the Control of Major Hazard Facilities, NOHSC: 1014,2002. www.docep.wa.gov.au/
46. Environmental Emergency Regulations (SOW2003-307), Environment Canada. www.ec.gc.cdCEPARegistry/regulations/ detailReg.cfm?intReg=70
47. Control of Major-Accident Hazards Involving Dangerous Substances, European
48. Directive Seveso I1 (96/82/EC). http://europa.eu.int/comm/environment/seveso/
49. Korean OSHA PSM standard, Industrial Safety and Health Act-Article 20, Preparation of Safety and Health Management Regulations.
50. Korean Ministry of Environment-Framework Plan on Hazardous Chemicals Management, 2001-2005. www.kosha.net/jsp/board/viewlist.jspcF29099&=19565&no=3
51. Malaysia-Depment of Occupational Safety and Health (DOSH) Ministry of Human Resources Malaysia, Section 16 of Act 5 14. http://dosh.mohr.gov.my/
52. Mexican Integral Security and Environmental Management System (SIASPA), 1998. www.pepsonline.org/Publications/pemex.pdf
53. Control of Major Accident Hazards Regulations (COMAH), United Kingdom Health & Safety Executive, 1999 and 2005. www.hse.gov.uWcomah
54. Joint Chemical Accident Investigation Team investigation report no. EPA 550-R-97-002, U.S. Environmental Protection Agency, October 1997.
55. Garvin., David, Learning in Action, Harvard Business School Press, 2000.
56. Cole, Bruce C. and Klein, James A., How to be a SufiStar, American Society of Safety Engineers Professional Development Conference, June 25,2003.
57. Covey, Stephen R., The 7 Habits of Highly Effective People, Simon and Schuster, New York, 1989.
58. UK Health and Safety Executive, Employee Involvement in Health and Safety: Some Examples of Good Practice, WPS/00/03,2001, www. hse.gov.ulchesearchihsl~dU2001 / employ-i.pdf.
59. UK Health and Safety Executive, Workforce Participation in the Management of Occupational Health and Safety, HSU2005/09,2004, http://wwwh. se.gov.uWRESEARCWhslqdU2005/hsIO509.pdf.
60. Community Awareness and Emergency Response Guide (CAER)., American Chemistry Council, Arlington, VA, 1995.
61. Community Advisory Panel Guide., American Chemistry Council, Arlington, VA, 1996.
62. The Chemical Safety Information, Site Security, and Fuels Regulatory Relief Act, Public Law (PL) 106-40, August 5, 1999. http://yosemite.epa.gov/oswer/ceppoweb.nsElcontent/csissh.htm
63. RMP Communication Manual., American Chemistry Council, Arlington, VA, 1999.
64. The Explosion at Concept Sciences: Hazards of Hydroxylamine, Chemical Safety and Hazard Investigation Board Report 1999-13-C-PA, Washington, DC, March 2002.
65. Center for Chemical Process Safety., Guidelines for Process Safety Documentation, American Institute of Chemical Engineers, New York, 1995.
66. Center for Chemical Process Safety., Essential Practices for Managing Chemical Reactivity Hazards, American Institute of Chemical Engineers, New York, 2003.
67. Kletz, Trevor, Case Histories of Process Plant Disasters, 4Ih edition, Elsevier Science, Burlington, Mass., 1999.
68. Kletz, Trevor, Lessons from Disaster: How Organizations Have No Memory and Accidents Recur, Gulf Publishing Company, Houston, Texas, 1993.
69. Lees, Frank P., Loss Prevention in the Process Industries, Hazard Identification, Assessment, and Control, 2nd edition, Butterworth-Heinemann, Oxford, England, 1996.
70. Peny, Robert H. and Green, Don W., Peny's Chemical Engineers' Handb o'o7k, edition, McGraw-Hill, New York, 1997.
71. Report of the Longford Royal Commission, Government Printer for the State of Victoria, 1999.
72. Guidelines for Hazard Evaluation Procedures (Second Edition with Worked Examples), Center for Chemical Process Safety, New York, 1992.
73. Layer of Protection Analysis-Simplified Process Risk Analysis, Center for Chemical Process Safety, New York, 2001.
74. Guidelines for Chemical Process Quantitative Risk Analysis (Second Edition), Center for Chemical Process Safety, New York, 1999.
75. Inherently Safer Chemical Processes: a Lqe Cycle Approach, Center for Chemical Process Safety, New York, 1997.
76. Revalidating Process Hazard Analyses, Center for Chemical Process Safety, New York, 2001.
77. Safev Digest of Lessons Learned, American Petroleum Institute Publication 758, 1981.
78. Chemical Accident Investigation Report-Terra Industries, Inc. Nitrogen Fertilizer Facility, Port Neal, Iowa, U.S. Environmental Protection Agency, Region 7, Emergency Response and Removal Branch, Kansas City, Kansas, issued January, 1996.
79. Bridges, William G. and Williams, Thomas R., Create Effective Safety Procedures and Operating Manuals, Chemical Engineering Progress, December 1997.
80. Center for Chemical Process Safety, Guidelines for Writing Effective Operating and Maintenance Procedures, American Institute of Chemical Engineers, New York, 1996.
81. Lees, Frank P., Loss Prevention in the Process Industries, Hazard Identifcation, Assessment, and Control, 2nd edition, Butterworth-Heinemann, Oxford, England, 1996.
82. U.S. Chemical Safety and Hazard Investigation Board, Safety Bulletin, Hazards of Nitrogen Asphyxiation, No. 2003-1 0-B, June 2003.
83. Kleindorfer, Paul R., Accident Epidemiology and the U.S. Chemical Industry: Preliminary Results from RMPVnfo, Center of Risk Management and Decision Processes, The Wharton School, University of Pennsylvania, March 6,2000.
84. Guiochon, Charles, What Might Have Happened in Toulouse (France) on September 21. 2001, Soci&tc Franqaise de Chimie, 2002.
85. Kletz, Trevor, Case Histories of Process Plant Disasters, 4nd edition, Elsevier Science, Burlington, Mass., 1999.
86. Kletz, Trevor, Lessons from Disaster: How Organizations Have No Memory and Accidents Recur, Gulf Publishing Company, Houston, Texas, 1993.
87. Safety Digest of Lessons Learned-Section 4, Safety in Maintenance, American Petroleum Institute Publication 758, 1981.
88. Process Safety Beacon, published electronically each month by the American Institute of Chemical Engineers' Center for Chemical Process Safety.
89. Lees, Frank P., Loss Prevention in the Process Industries, Hazard Identification, Assessment, and Control, 2nd edition, Butterworth-Heinemann, Oxford, England, 1996.
90. NTSB Report Number: AAR-79-17 (NTIS Report Number: NTISUB/E/104-017), American Airlines, Inc., DC-10, NI I O A A, Chicago International Airport, Chicago, IL, May 25, 1979, adopted on 12/21/1979.
91. API 5 10, Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration, ANSVAPI 5 10-2006, American Petroleum Institute, Sh edition, June 2006.
92. API 570, Piping Inspection Code: Inspection, Repair, Alteration, and Rerating of Inservice Piping Systems, ANSI/API 570-2000, American Petroleum Institute, 2d edition, October 1998.
93. Risk-Based Inspection, API-580. American Petroleum Institute, Washington, DC, 2000.
94. Functional Safety: Safety Instrumented System for the Process Industry Sector-Part I: Framework, Definitions, System, Hardware and Software Requirements ANSl/lSA-84.00.01-2004 Part I (IEC 6151 1-1 Mod), The International Society for Measurement and Control, Research Triangle Park, North Carolina, 2004.
95. Base Resource Document-Risk-based Inspection, API-581. American Petroleum Institute, Washington, DC, 2000.
96. Center for Chemical Process Safety, Guidelines for Mechanical Integrity Systems, American Institute of Chemical Engineers, New York, 2006.
97. API Recommended Practice 2220, Improving Owner and Contractor Safety Performance, September 1991.
98. API Recommended Practice 2221, Manager's Guide to Implementing a Contractor Safety Program, June 1996.
99. CCPS, Contractor and Client Relations to Assure Process Safety, 1996.
100. International Association of Oil & Gas Producers, HSE Management-Guidelines for Working Together In a Contract Environment, Report No. 6.64129 I, 1999.
101. HSE, Use of Contractors-A Joint Responsibility, INDG368, ISBN 0 7176 2566 4,2002.
102. Lees, Frank P., Loss Prevention in the Process Industries. Hazard Identifeation, Assessment, and Control, 2d edition, Butterworth-Heinernann, Oxford, England, 1996.
103. Guidelines for Managing Change, AIChE Center for Chemical Process Safety, Wiley, New York, NY, 2007.
104. Guidelines for Managhg Process Change, American Chemistry Council, Arlington, VA, 1993.
105. Pre-startup Safe Review Element, Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119(i)), U.S. Occupational Safe and Health Administration, May 1992. www.osha.gov
106. Guidelines for Pegorming Pre-Startup Reviews, AIChE Center for Chemical Process Safety, Wiley, New Yo&, NY, 2007.
107. EPA Chemical Accident Investigation Report-Tosco Avon Rejnety, Martinez. California, EPA550-R-98-009, U.S. Environmental Protection Agency Chemical Emergency Preparedness and Prevention Office, Washington, 1998.
108. Conduct of Operations at Nuclear Power Plants, DS347, International Atomic Energy Agency, Vienna, 2005.
109. Conduct of Operations Requirements for DOE Facilities, DOE Order 5480.19, U.S. Department of Energy, Washington, 2001.
110. Galsworth, Gwendolyn D., Visual Systems: Harnessing the Power of the Visual Workplace, American Management Association, New York, 1997.
111. Hirano. Hiroyuki, 5 Pillars of the Visual Workplace-The Sourcebook for 5s Implementation, Productivity Press, Portland, Oregon, 1995.
112. Stephens, Hugh W., The Texas City Disaster, 1947, University of Texas Press, Austin, Texas, 1997.
113. Stringfield, William H., Emergency Planning and Management: Ensuring Your Company's Survival in the Event of a Disaster, Government Institutes, Rockville, Maryland, 1996.
114. Guidelines for Technical Planning for On-Site Emergencies, American Institute o f Chemical Engineers, New York, New York, 1995.
115. Lees, Frank P., Loss Prevention in the Process Industries, Hazard Identification, Assessment, and Control, 2d edition, Butterworth-Heineman, Oxford, England, 1996.
116. Theodore, Louis, Reynolds, Joseph P., and Taylor, Francis B., Accident and Emergency Management, John Wiley and Sons, New York, New Yo&, 1989.
117. Columbia Accident Investigation Board, Report Volume I, U.S. Government Printing Office, August 2003.
118. Vaughan, D.; The Challenger Launch Decision, Chicago: University of Chicago Press, 1996.
119. US. Department of Energy, Accidenthcident Investigation Manual, DOE/SSDC 76-45/27,2nd edition. Washington, DC: U.S. Department of Energy, 1985.
120. Center for Chemical Process Safety (CCPS), Guidelines for Investigating Chemical Process Incidents. Second Edition, New Yo& American Institute of Chemical Engineers, 2003.
121. lnside the Ford/Firestone Fight, Time Magazine, 19.5 May 29,2001.
122. Mars Climate Orbiter Mishap Investigation Board-Phase I Report, National Aeronautics and Space Administration, Washington, November 10, 1999.
123. Prosmart-The Tool You Need to Improve Process Safety, Center for Chemical Process Safety, American Institute of Chemical Engineers, New York, www. aiche. org/ccps/prosmart/
124. Guidance on Safety Performance Indicators-Guidance for Industty, Public Authorities and Communities for Developing SPI Programmes related to Chemical Accident Prevention, Preparedness and Response, Organization for Cooperation and Economic Development Environment, Health and Safety Publications, Series on Chemical Accidents No. 1 I, Danvers, Massachusetts, 2005.
125. Step-by-step Guide to DeveIoping Process Safety Perjormance fndicators, U.K. Health and Safety Executive, ISBN 0 7176 6180 6, Norwich, England, 2006.
126. CCPS, Guidelines for Auditing Process Safev Management Systems, 1993.
127. Frank, W.; Hobbs, D.; and Jones, D., "What Are Process Safety Management Audits Telling Operators?'', Hydrocarbon Processing, October 2000.
128. Investigation Report-Refinery Incident at Motiva Enterprises LLC, Report No. 201-05-I-DE, U.S. Chemical Safety and Hazard Investigation Board, Washington, October, 2002.
129. Center for Chemical Process Safety, Guidelines for Jmplementing Process Safety Management Systems, American Institute of Chemical Engineers, New York, New York, 1994.
130. Center for Chemical Process Safety, Guidelines for Technical Management of Chemical Process Safety, American Institute of Chemical Engineers, New York, New York. 1989.
131. Center for Chemical Process Safety, Plant Guidelines for Technical Management of Chemical Process Safety, American Institute of Chemical Engineers, New York, New York, 1992 (and revised edition, 1995).
132. The American Chemistry Council's Responsible Care Management System, American Chemistry Council, Alexandria, Virginia.
133. API W 750., Management of Process Hazards, American Petroleum Institute, Washington, DC, 1990.