-
1
-
-
84897596104
-
Software support development for numerical solution of Ansys CFX
-
ISSN 1898-4088
-
T. Brestovič, and N. Jasminská Software support development for numerical solution of Ansys CFX Acta Mech. et Automa 7 4 2013 215 221 ISSN 1898-4088
-
(2013)
Acta Mech. et Automa
, vol.7
, Issue.4
, pp. 215-221
-
-
Brestovič, T.1
Jasminská, N.2
-
2
-
-
84897486809
-
UAV-based photogrammetric point clouds - Tree stem mapping in open stands in comparison to terrestrial laser scanner point clouds
-
(Volume XL-1/W2, UAV-g2013, 4-6 September 2013, Rostock, Germany)
-
A. Fritz, T. Kattenborn, and B. Koch UAV-based photogrammetric point clouds - tree stem mapping in open stands in comparison to terrestrial laser scanner point clouds Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2013 4 6 (Volume XL-1/W2, UAV-g2013, 4-6 September 2013, Rostock, Germany)
-
(2013)
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci.
, pp. 4-6
-
-
Fritz, A.1
Kattenborn, T.2
Koch, B.3
-
3
-
-
84898047029
-
Initial efforts toward mission-specific imaging surveys from aerial exploring platforms: UAV
-
S. Niranjan, G. Gupta, N. Sharma, M. Mangal, and V. Singh Initial efforts toward mission-specific imaging surveys from aerial exploring platforms: UAV Map World Forum, Hyderabad, India 2007
-
(2007)
Map World Forum, Hyderabad, India
-
-
Niranjan, S.1
Gupta, G.2
Sharma, N.3
Mangal, M.4
Singh, V.5
-
4
-
-
84969938375
-
Decree of the Ministry of Economy of the Slovak Republic no. 1/1993 on mining documentation, mining activities and some activities conducted by mining methods
-
Decree of the Ministry of Economy of the Slovak Republic no. 1/1993 on mining documentation, mining activities and some activities conducted by mining methods, in: A single automated system of legal information, the Ministry of Justice.
-
A Single Automated System of Legal Information, the Ministry of Justice
-
-
-
5
-
-
85047482889
-
Efficient measuring methods for mechanical parts
-
ISSN 1584-2673
-
M. Dúbravčík, and Š. Kender Efficient measuring methods for mechanical parts Ann. Faculty Eng. Hunedoara - Int. J. Eng. 12 3 2014 149 153 ISSN 1584-2673
-
(2014)
Ann. Faculty Eng. Hunedoara - Int. J. Eng.
, vol.12
, Issue.3
, pp. 149-153
-
-
Dúbravčík, M.1
Kender, Š.2
-
6
-
-
84940206708
-
Measuring temperature of the atmosphere in the steelmaking furnace
-
ISSN 0263-2241
-
R. Pyszko, T. Brestovič, N. Jasminská, M. Lázár, M. Mário, M. Puškár, and R. Turisová Measuring temperature of the atmosphere in the steelmaking furnace Measurement 75 2015 92 103 ISSN 0263-2241
-
(2015)
Measurement
, vol.75
, pp. 92-103
-
-
Pyszko, R.1
Brestovič, T.2
Jasminská, N.3
Lázár, M.4
Mário, M.5
Puškár, M.6
Turisová, R.7
-
7
-
-
78650308843
-
UAV and RPV systems for photogrammetric surveys in archaelogical areas: Two tests in the Piedmont region (Italy)
-
F. Chiabrandoa, F. Nexb, D. Piattib, and F. Rinaudob UAV and RPV systems for photogrammetric surveys in archaelogical areas: two tests in the Piedmont region (Italy) J. Archaeol. Sci. 38 3 2011 697 710
-
(2011)
J. Archaeol. Sci.
, vol.38
, Issue.3
, pp. 697-710
-
-
Chiabrandoa, F.1
Nexb, F.2
Piattib, D.3
Rinaudob, F.4
-
8
-
-
84970022841
-
-
(accessed 08.12.2015)
-
Leica FlexLine TS 02. < http://www.geotech.sk/downloads/Totalne-stanice/FlexLine-TS02-Datasheet-en.pdf > (accessed 08.12.2015).
-
Leica FlexLine TS 02.
-
-
-
9
-
-
85047487542
-
Using of 3D scanner in the automotive design
-
ISSN 1337-7094
-
M. Dúbravčík, Š. Kender, and Š. Babjak Using of 3D scanner in the automotive design Transfer inovácií 22 2012 121 124 ISSN 1337-7094
-
(2012)
Transfer Inovácií
, vol.22
, pp. 121-124
-
-
Dúbravčík, M.1
Kender, Š.2
Babjak, Š.3
-
10
-
-
84883783564
-
UAV photogrammetry for mapping and 3D modeling-current status and future perspectives
-
H. Eisenbeiss, M. Kunz, H. Ingensand
-
F. Remondino, L. Barazzetti, F. Nex, M. Scaioni, and D. Sarazzi UAV photogrammetry for mapping and 3D modeling-current status and future perspectives H. Eisenbeiss, M. Kunz, H. Ingensand, Proceedings of the International Conference on Unmanned Aerial Vehicle in Geomatics (UAV-g) 2011 Zurich, Switzerland, September 2011
-
(2011)
Proceedings of the International Conference on Unmanned Aerial Vehicle in Geomatics (UAV-g) 2011 Zurich, Switzerland, September
-
-
Remondino, F.1
Barazzetti, L.2
Nex, F.3
Scaioni, M.4
Sarazzi, D.5
-
11
-
-
85047447822
-
Temperature dependence testing of inertial sensors
-
May 22-23, 2013, Brno, Czech Republic. University of Defence, Brno ISBN 978-80-7231-918-3
-
P. Lipovský, M. Laššák, K. Draganová, J. Blažek, J. Hudák, V. Moucha, Temperature dependence testing of inertial sensors, in: ICMT 2013: international Conference on Military Technologies: May 22-23, 2013, Brno, Czech Republic. University of Defence, Brno, 2013, pp. 965-971. ISBN 978-80-7231-918-3.
-
(2013)
ICMT 2013: International Conference on Military Technologies
, pp. 965-971
-
-
Lipovský, P.1
-
12
-
-
84871878755
-
Towards fully automatic photogrammetric reconstruction using digital images taken from UAVs
-
A. Irschara, V. Kaufmann, M. Klopschitz, H. Bischof, and F. Leberl Towards fully automatic photogrammetric reconstruction using digital images taken from UAVs Proceeding ISPRS Symposium, 100 Years ISPRS - Advancing Remote Sensing Science 2010
-
(2010)
Proceeding ISPRS Symposium, 100 Years ISPRS - Advancing Remote Sensing Science
-
-
Irschara, A.1
Kaufmann, V.2
Klopschitz, M.3
Bischof, H.4
Leberl, F.5
-
13
-
-
84929337771
-
Measurement of boundary conditions for numerical solution of temperature fields of metal hydride containers
-
ISSN 0263-2241
-
T. Brestovič, N. Jasminská, R. Pyszko, M. Lázár, and M. Puškár Measurement of boundary conditions for numerical solution of temperature fields of metal hydride containers Measurement 72 2015 52 60 ISSN 0263-2241
-
(2015)
Measurement
, vol.72
, pp. 52-60
-
-
Brestovič, T.1
Jasminská, N.2
Pyszko, R.3
Lázár, M.4
Puškár, M.5
-
14
-
-
84870252479
-
The measurement method solving the problems of engine output characteristics caused by change in atmospheric conditions on the principle of the theory of optimal temperature range of exhaust system
-
ISSN 0263-2241
-
M. Puškár, P. Bigoš, M. Balážiková, and V. Peťková The measurement method solving the problems of engine output characteristics caused by change in atmospheric conditions on the principle of the theory of optimal temperature range of exhaust system Measurement: J. Int. Meas. Confederation (IMEKO) 46 1 2013 467 475 ISSN 0263-2241
-
(2013)
Measurement: J. Int. Meas. Confederation (IMEKO)
, vol.46
, Issue.1
, pp. 467-475
-
-
Puškár, M.1
Bigoš, P.2
Balážiková, M.3
Peťková, V.4
-
15
-
-
82155162364
-
Method for photogrammetric surveying of archaeological sites with light aerial platforms
-
A.T. Mozas-Calvache, J.L. Pérez-García, F.J. Cardenal-Escarcena, E. Mata-Castro, and J. Delgado-García Method for photogrammetric surveying of archaeological sites with light aerial platforms J. Archaeol. Sci. 39 2 2012 521 530
-
(2012)
J. Archaeol. Sci.
, vol.39
, Issue.2
, pp. 521-530
-
-
Mozas-Calvache, A.T.1
Pérez-García, J.L.2
Cardenal-Escarcena, F.J.3
Mata-Castro, E.4
Delgado-García, J.5
-
16
-
-
84946079891
-
Development and evaluation of a UAV-photogrammetry system for precise 3D environmental modeling
-
M. Shahbazi, G. Sohn, J. Théau, and P. Menard Development and evaluation of a UAV-photogrammetry system for precise 3D environmental modeling Sens. (Switzerland) 15 11 2015 27493 27524
-
(2015)
Sens. (Switzerland)
, vol.15
, Issue.11
, pp. 27493-27524
-
-
Shahbazi, M.1
Sohn, G.2
Théau, J.3
Menard, P.4
-
17
-
-
84902174806
-
Noise analysis of magnetic sensors using allan variance
-
ISSN 1898-794X
-
K. Draganová, F. Kmec, J. Blažek, D. Praslička, J. Hudák, and M. Laššák Noise analysis of magnetic sensors using allan variance Acta Phys. Pol. A 126 1 2014 394 395 ISSN 1898-794X
-
(2014)
Acta Phys. Pol. A
, vol.126
, Issue.1
, pp. 394-395
-
-
Draganová, K.1
Kmec, F.2
Blažek, J.3
Praslička, D.4
Hudák, J.5
Laššák, M.6
-
19
-
-
85047494060
-
Fluxgate sensors based on magnetic microwires for weak magnetic fields measurement
-
ISSN 1335-3632
-
J. Hudák, P. Lipovský, J. Bajús, A. Čverha, P. Klein, R. Varga, J. Onufer, and J. Ziman Fluxgate sensors based on magnetic microwires for weak magnetic fields measurement J. Electr. Eng. 66 7s 2015 153 156 ISSN 1335-3632
-
(2015)
J. Electr. Eng.
, vol.66
, Issue.7 S
, pp. 153-156
-
-
Hudák, J.1
Lipovský, P.2
Bajús, J.3
Čverha, A.4
Klein, P.5
Varga, R.6
Onufer, J.7
Ziman, J.8
-
20
-
-
84949517221
-
Study of changes for selected fire parameters at activation of devices for smoke and heat removal and at activation
-
ISSN 1805-0476
-
Jiří Pokorný, Marianna Tomašková, and Michaela Balážiková Study of changes for selected fire parameters at activation of devices for smoke and heat removal and at activation MM Sci. J. 4 4 2015 764 767 ISSN 1805-0476
-
(2015)
MM Sci. J.
, vol.4
, Issue.4
, pp. 764-767
-
-
Pokorný, J.1
Tomašková, M.2
Balážiková, M.3
-
21
-
-
84990240248
-
Augmented reality as an educational tool of M-Learning focused on architecture and urban planning
-
December 4-5, 2014, Starý Smokovec. IEEE, Danvers, 2014 ISBN 978-1-4799-7738-3
-
A. Mesárošová, M. Ferrer Hernandez, P. Mesároš, Augmented reality as an educational tool of M-Learning focused on architecture and urban planning, in: ICETA 2014: 12th IEEE International Conference on Emerging eLearning Technologies and Applications: Proceedings: December 4-5, 2014, Starý Smokovec. IEEE, Danvers, 2014, pp. 325-330. ISBN 978-1-4799-7738-3.
-
ICETA 2014: 12th IEEE International Conference on Emerging ELearning Technologies and Applications: Proceedings
, pp. 325-330
-
-
Mesárošová, A.1
Ferrer Hernandez, M.2
Mesároš, P.3
-
22
-
-
84947907591
-
DEM generation with UAV Photogrammetry and accuracyanalysis in Sahitler hill
-
M. Uysal, A.S. Toprak, and N. Polak DEM generation with UAV Photogrammetry and accuracyanalysis in Sahitler hill Measurement 73 2015 539 543
-
(2015)
Measurement
, vol.73
, pp. 539-543
-
-
Uysal, M.1
Toprak, A.S.2
Polak, N.3
-
23
-
-
85047474796
-
Augmented reality in architecture and design: Case study of the district Caanyal in Valencia
-
Spain Performing Arts, Architecture and Design: Conference Proceedings: 1-10 September, 2014, Albena, Bulgaria. STEF92 Technology Ltd., Sofia ISBN 978-619-7105-30-08, ISSN 2367-5659
-
Peter Mesároš, Alena Mesárošová, Manuel Ferrer Hernandez, Augmented reality in architecture and design: case study of the district Caanyal in Valencia, Spain, in: SGEM 2014: International Multidisciplinary Scientific Conferences on Social Sciences and Arts: Arts, Performing Arts, Architecture and Design: Conference Proceedings: 1-10 September, 2014, Albena, Bulgaria. STEF92 Technology Ltd., Sofia, 2014, pp. 541-548. ISBN 978-619-7105-30-08, ISSN 2367-5659.
-
(2014)
SGEM 2014: International Multidisciplinary Scientific Conferences on Social Sciences and Arts: Arts
, pp. 541-548
-
-
Peter Mesároš, A.1
-
24
-
-
84969910156
-
Využitie geodetických metód na modelovanie stien povrchových lomov a skalných útvarov a pri ich štruktúrnej analýze: Príklad z kameňolomu Sedlice
-
Web ISSN 1338-3523, ISSN 0369-2086
-
Ľ. Kovanič, and Z. Németh Využitie geodetických metód na modelovanie stien povrchových lomov a skalných útvarov a pri ich štruktúrnej analýze: príklad z kameňolomu Sedlice Mineralia Slovaca 45 2013 69 84 Web ISSN 1338-3523, ISSN 0369-2086
-
(2013)
Mineralia Slovaca
, vol.45
, pp. 69-84
-
-
Kovanič, L.1
Németh, Z.2
-
27
-
-
84880722622
-
Influence of technological factors of die casting on mechanical properties of castings from silumin
-
ISSN 1876-1100
-
Stefan Gaspar, and Jan Pasko Influence of technological factors of die casting on mechanical properties of castings from silumin Lect. Notes Electr. Eng. 240 2013 713 722 ISSN 1876-1100
-
(2013)
Lect. Notes Electr. Eng.
, vol.240
, pp. 713-722
-
-
Gaspar, S.1
Pasko, J.2
-
28
-
-
84893472781
-
Main factors influencing the qualitative properties of casts in the process of die casting
-
27-31 October 2013, Montreal, Canada ISBN 978-162993309-2
-
Stefan Gaspar, Jan Pasko, Slavko Pavlenko, Main factors influencing the qualitative properties of casts in the process of die casting, in: COM 2013: Materials Science and Technology Conference and Exhibition: 27-31 October 2013, Montreal, Canada, 2013, pp. 1-7. ISBN 978-162993309-2.
-
(2013)
COM 2013: Materials Science and Technology Conference and Exhibition
, pp. 1-7
-
-
Gaspar, S.1
Pasko, J.2
Pavlenko, S.3
|