Liquid-Phase Epitaxially Grown Metal–Organic Framework Thin Films for Efficient Tandem Catalysis Through Site-Isolation of Catalytic Centers

ChemPlusChem

Volumn 81, Issue 8, 2016, Pages 708-713

  Beyzavi, M Hassan ^a   Vermeulen, Nicolaas A ^a   Zhang, Kainan ^a   So, Monica ^a,b   Kung, Chung Wei ^a   Hupp, Joseph T ^a   Farha, Omar K ^a,c  

^a NORTHWESTERN UNIVERSITY   (United States)

^b CALIFORNIA STATE UNIVERSITY   (United States)

^c KING ABDULAZIZ UNIVERSITY   (Saudi Arabia)

Author keywords

cyclic carbonates; epoxidation; liquid phase epitaxy; metal organic frameworks; tandem catalysis

Indexed keywords

EID: 84963657761     PISSN: None     EISSN: 21926506     Source Type: Journal    
DOI: 10.1002/cplu.201600046     Document Type: Article

References (78)

1. E. Ricca, B. Brucher, J. H. Schrittwieser, Adv. Synth. Catal. 2011, 353, 2239–2262.
2. D. E. Fogg, Can. J. Chem. 2008, 86, 931–941.
3. D. E. Fogg, E. N. dos Santos, Coord. Chem. Rev. 2004, 248, 2365–2379.
4. J. C. Wasilke, S. J. Obrey, R. T. Baker, G. C. Bazan, Chem. Rev. 2005, 105, 1001–1020.
5. I. Oroz-Guinea, E. Garcia-Junceda, Curr. Opin. Chem. Biol. 2013, 17, 236–249.
6. R. K. Grasselli, Catal. Today 2014, 238, 10–27.
7. G. Férey, Chem. Soc. Rev. 2008, 37, 191–214;
8. S. Horike, S. Shimomura, S. Kitagawa, Nat. Chem. 2009, 1, 695–704;
9. H. C. Zhou, J. R. Long, O. M. Yaghi, Chem. Rev. 2012, 112, 673–674;
10. H. Furukawa, K. E. Cordova, M. O'Keeffe, O. M. Yaghi, Science 2013, 341, 1230444;
11. O. K. Farha, J. T. Hupp, Acc. Chem. Res. 2010, 43, 1166–1175.
12. J. Lee, O. K. Farha, J. Roberts, K. A. Scheidt, S. T. Nguyen, J. T. Hupp, Chem. Soc. Rev. 2009, 38, 1450–1459;
13. L. Q. Ma, C. Abney, W. B. Lin, Chem. Soc. Rev. 2009, 38, 1248–1256.
14. Z. Y. Gu, J. Park, A. Raiff, Z. W. Wei, H. C. Zhou, ChemCatChem 2014, 6, 67–75.
15. F. Zaera, Chem. Soc. Rev. 2013, 42, 2746–2762;
16. R. Schlögl, Angew. Chem. Int. Ed. 2015, 54, 3465–3520;
17. Angew. Chem. 2015, 127, 3531–3589.
18. H. C. Zhou, S. Kitagawa, Chem. Soc. Rev. 2014, 43, 5415–5418.
19. The liquid-phase epitaxial (LPE) synthesis method of the article title typically entails even milder conditions (lower temperatures) than solvothermal synthesis. The LPE approach, at least in our hands, also typically requires much lower reactant concentrations than conventional approaches to MOF synthesis. Thus, LPE is particularly attractive if reactant solubilities are low or if the absolute quantity of a reactant available is small.
20. A. Corma, H. Garcia, F. X. L. I. Xamena, Chem. Rev. 2010, 110, 4606–4655.
21. J. W. Liu, L. F. Chen, H. Cui, J. Y. Zhang, L. Zhang, C. Y. Su, Chem. Soc. Rev. 2014, 43, 6011–6061.
22. R. Srirambalaji, S. Hong, R. Natarajan, M. Yoon, R. Hota, Y. Kim, Y. H. Ko, K. Kim, Chem. Commun. 2012, 48, 11650–11652;
23. K. Manna, T. Zhang, F. X. Greene, W. B. Lin, J. Am. Chem. Soc. 2015, 137, 2665–2673;
24. K. P. Lillerud, U. Olsbye, M. Tilset, Top Catal 2010, 53, 859–868;
25. B. Y. Li, Y. M. Zhang, D. X. Ma, L. Li, G. H. Li, G. D. Li, Z. Shi, S. H. Feng, Chem. Commun. 2012, 48, 6151–6153;
26. A. Arnanz, M. Pintado-Sierra, A. Corma, M. Iglesias, F. Sanchez, Adv. Synth. Catal. 2012, 354, 1347–1355;
27. J. Park, J. R. Li, Y. P. Chen, J. Yu, A. A. Yakovenko, Z. U. Wang, L. B. Sun, P. B. Balbuena, H. C. Zhou, Chem. Commun. 2012, 48, 9995–9997;
28. Y. Pan, B. Yuan, Y. Li, D. He, Chem. Commun. 2010, 46, 2280–2282;
29. X. Li, Z. Guo, C. Xiao, T. W. Goh, D. Tesfagaber, W. Huang, ACS Catal. 2014, 4, 3490–3497;
30. T. Ishida, M. Nagaoka, T. Akita, M. Haruta, Chem. Eur. J. 2008, 14, 8456–8460;
31. D. Esken, S. Turner, O. I. Lebedev, G. Van Tendeloo, R. A. Fischer, Chem. Mater. 2010, 22, 6393–6401;
32. F. G. Cirujano, F. X. L. I. Xamena, A. Corma, Dalton Trans. 2012, 41, 4249–4254;
33. H. Liu, G. Chen, H. Jiang, Y. Li, R. Luque, ChemSusChem 2012, 5, 1892–1896;
34. H. Liu, Y. Li, H. Jiang, C. Vargas, R. Luque, Chem. Commun. 2012, 48, 8431–8433;
35. M. Zhao, K. Deng, L. He, Y. Liu, G. Li, H. Zhao, Z. Tang, J. Am. Chem. Soc. 2014, 136, 1738–1741;
36. Q. Yang, Y.-Z. Chen, Z. U. Wang, Q. Xu, H.-L. Jiang, Chem. Commun. 2015, 51, 10419–10422;
37. F. G. Cirujano, A. Leyva-Perez, A. Corma, F. X. L. I. Xamena, ChemCatChem 2013, 5, 538–549;
38. Y. Z. Chen, Y. X. Zhou, H. W. Wang, J. L. Lu, T. Uchida, Q. Xu, S. H. Yu, H. L. Jiang, ACS Catal. 2015, 5, 2062–2069;
39. F. J. Song, C. Wang, W. B. Lin, Chem. Commun. 2011, 47, 8256–8258.
40. M. Yoon, R. Srirambalaji, K. Kim, Chem. Rev. 2012, 112, 1196–1231.
41. O. K. Farha, A. M. Shultz, A. A. Sarjeant, S. T. Nguyen, J. T. Hupp, J. Am. Chem. Soc. 2011, 133, 5652–5655.
42. 2fixation and could potentially be a more environmentally friendly route for the industrial preparation of carbonates, which currently involves highly toxic and corrosive phosgene and diols. (T. Sakakura, K. Kohno, Chem. Commun. 2009, 1312–1330.) MOFs are found to be interesting catalysts for this reaction.
43. 2. (
44. M. H. Beyzavi, R. C. Klet, S. Tussupbayev, J. Borycz, N. A. Vermeulen, C. J. Cramer, J. F. Stoddart, J. T. Hupp, O. K. Farha, J. Am. Chem. Soc. 2014, 136, 15861–15864.
45. J. P. Collman, J. I. Brauman, P. D. Hampton, H. Tanaka, D. S. Bohle, R. T. Hembre, J. Am. Chem. Soc. 1990, 112, 7980–7984;
46. K. Konishi, K. Oda, K. Nishida, T. Aida, S. Inoue, J. Am. Chem. Soc. 1992, 114, 1313–1317.
47. IV-porphyrin dimer. This decomposition pathway is disallowed if the catalyst is incorporated into the MOF. (J. A. A. W. Elemans, E. J. A. Bijsterveld, A. E. Rowan, R. J. M. Nolte, Eur. J. Org. Chem. 2007, 751–757).
48. T. Ema, Y. Miyazaki, S. Koyama, Y. Yano, T. Sakai, Chem. Commun. 2012, 48, 4489–4491.
49. K. Brown, S. Zolezzi, P. Aguirre, D. Venegas-Yazigi, V. Paredes-Garcia, R. Baggio, M. A. Novak, E. Spodine, Dalton Trans. 2009, 1422–1427;
50. M. J. Beier, W. Kleist, M. T. Wharmby, R. Kissner, B. Kimmerle, P. A. Wright, J. D. Grunwaldt, A. Baiker, Chem. Eur. J. 2012, 18, 887–898;
51. K. Leus, G. Vanhaelewyn, T. Bogaerts, Y. Y. Liu, D. Esquivel, F. Callens, G. B. Marin, V. Van Speybroeck, H. Vrielinck, P. Van Der Voort, Catal. Today 2013, 208, 97–105;
52. R. Sen, D. Saha, D. Mal, P. Brandao, Z. Lin, Eur. J. Inorg. Chem. 2013, 5103–5109;
53. G. Tuci, G. Giambastiani, S. Kwon, P. C. Stair, R. Q. Snurr, A. Rossin, ACS Catal. 2014, 4, 1032–1039;
54. S. Abednatanzi, A. Abbasi, M. Masteri-Farahani, J. Mol. Catal. A 2015, 399, 10–17;
55. J. W. Brown, Q. T. Nguyen, T. Otto, N. N. Jarenwattananon, S. Gloggler, L. S. Bouchard, Catal. Commun. 2015, 59, 50–54;
56. J. C. Wang, F. W. Ding, J. P. Ma, Q. K. Liu, J. Y. Cheng, Y. B. Dong, Inorg. Chem. 2015, 54, 10865–10872;
57. M. H. Beyzavi, N. A. Vermeulen, A. J. Howarth, S. Tussupbayev, A. B. League, N. M. Schweitzer, J. R. Gallagher, A. E. Platero-Prats, N. Hafezi, A. A. Sarjeant, J. T. Miller, K. W. Chapman, J. F. Stoddart, C. J. Cramer, J. T. Hupp, O. K. Farha, J. Am. Chem. Soc. 2015, 137, 13624–13631.
58. For an important safety note regarding the preparation of this oxidant, see: “Chemical safety: Synthesis procedure”; J. T. Hupp, S. T. Nguyen, Chem. Eng. News 2011, 89, 2.
59. During our optimization studies, we found that an activating group such as a para-methoxy group would enhance the yield of the corresponding cyclic carbonate; therefore, we switched from styrene to p-methoxystyrene for our further studies and optimizations.
60. K. N. Zhang, Y. Yu, S. T. Nguyen, J. T. Hupp, L. J. Broadbelt, O. K. Farha, Ind. Eng. Chem. Res. 2015, 54, 922–927.
61. O. Karagiaridi, W. Bury, E. Tylianakis, A. A. Sarjeant, J. T. Hupp, O. K. Farha, Chem. Mater. 2013, 25, 3499–3503.
62. K. Otsubo, T. Haraguchi, O. Sakata, A. Fujiwara, H. Kitagawa, J. Am. Chem. Soc. 2012, 134, 9605–9608;
63. O. Shekhah, J. Liu, R. A. Fischer, C. Woll, Chem. Soc. Rev. 2011, 40, 1081–1106;
64. A. Bétard, R. A. Fischer, Chem. Rev. 2012, 112, 1055–1083;
65. D. Zacher, O. Shekhah, C. Woll, R. A. Fischer, Chem. Soc. Rev. 2009, 38, 1418–1429;
66. O. Shekhah, H. Wang, D. Zacher, R. A. Fischer, C. Woll, Angew. Chem. Int. Ed. 2009, 48, 5038–5041;
67. Angew. Chem. 2009, 121, 5138–5142;
68. J.-L. Zhuanga, A. Terfortc, C. Wöll, Coord. Chem. Rev. 2016, 307, 391–424.
69. D. Zacher, K. Yusenko, A. Betard, S. Henke, M. Molon, T. Ladnorg, O. Shekhah, B. Schupbach, T. de Los Arcos, M. Krasnopolski, M. Meilikhov, J. Winter, A. Terfort, C. Woll, R. A. Fischer, Chem. Eur. J. 2011, 17, 1448–1455;
70. O. Shekhah, Materials 2010, 3, 1302–1315;
71. O. Shekhah, H. Wang, S. Kowarik, F. Schreiber, M. Paulus, M. Tolan, C. Sternemann, F. Evers, D. Zacher, R. A. Fischer, C. Woll, J. Am. Chem. Soc. 2007, 129, 15118–15119;
72. M. C. So, S. Jin, H. J. Son, G. P. Wiederrecht, O. K. Farha, J. T. Hupp, J. Am. Chem. Soc. 2013, 135, 15698–15701;
73. M. C. So, M. H. Beyzavi, R. Sawhney, O. Shekhah, M. Eddaoudi, S. S. Al-Juaid, J. T. Hupp, O. K. Farha, Chem. Commun. 2015, 51, 85–88;
74. D. Zacher, R. Schmid, C. Woll, R. A. Fischer, Angew. Chem. Int. Ed. 2011, 50, 176–199;
75. Angew. Chem. 2011, 123, 184–208.
76. B. Liu, M. Tu, D. Zacher, R. A. Fischer, Adv. Funct. Mater. 2013, 23, 3790–3798.
77. +) at 30 keV followed by 5 keV then 2 keV to reduce ion beam damage.
78. It should be noted that the resulting thin film was not studied further after completion of the tandem reaction.