Spray development and wall impingement of ethanol and gasoline in an optical direct injection spark ignition engine

ASME 2015 Internal Combustion Engine Division Fall Technical Conference, ICEF 2015

Volumn 1, Issue , 2015, Pages

  Fatouraie, Mohammad ^a   Wooldridge, Margaret S ^a   Petersen, Benjamin R ^b   Wooldridge, Steven T ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; COOLANTS; DIESEL ENGINES; ENGINES; ETHANOL; FUEL INJECTION; FUELS; GASOLINE; IGNITION; INTERNAL COMBUSTION ENGINES;

COOLANT TEMPERATURE; DIRECT INJECTION SPARK IGNITION ENGINES; FUEL INJECTION TIMING; HIGH SPEED IMAGING; INJECTION PRESSURES; QUANTITATIVE METRICS; SPRAY TIP PENETRATION; START OF INJECTIONS;

DIRECT INJECTION;

EID: 84961839370     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/ICEF2015-1053     Document Type: Conference Paper

References (26)

1. Zhang, S. and W. McMahon, Apr. 2012, "Particulate Emissions for LEV II Light-Duty Gasoline Direct Injection Vehicles," SAE Int. J. Fuels Lubr., vol. 5, no. 2, pp. 637-646, doi: 10.4271/2012-01-0442.
2. Fraser, N., H. Blaxill, G. Lumsden, and M. Bassett, 2008, "Challenges for Increased Efficiency through Gasoline Engine Downsizing," SAE Int. J. Engines, vol. 2, no. 2009-01-1053, pp. 991-1008, doi: 10.4271/2009-01-1053.
3. Ericsson, P., M. Holmström, A. Amberntsson-carlsson, C. Ohlson, M. Skoglundh, B. Andersson, and P. Carlsson, 2008, "Characterization of Particulate Emissions and Methodology for Oxidation of Particulates from Non-Diesel Combustion Systems," SAE Tech. Pap., no. 2008-01-1746, doi: 10.4271/2008-01-1746.
4. Price, P., R. Stone, T. Collier, and M. Davies, 2006, "Particulate Matter and Hydrocarbon Emissions Measurements : Comparing First and Second Generation DISI with PFI in Single Cylinder Optical Engines," SAE Tech. Pap., no. 2006-01-1263, doi: 10.4271/2006-01-1263.
5. Braisher, M., R. Stone, and P. Price, 2010, "Particle Number Emissions from a Range of European Vehicles," SAE Tech. Pap., no. 2010-01-0786, doi: 10.4271/2010-01-0786.
6. Kasper, T., P. Owald, M. Kamphus, and K. Kohse-Höinghaus, Aug. 2007, "Ethanol flame structure investigated by molecular beam mass spectrometry," Combust. Flame, vol. 150, no. 3, pp. 220-231, doi: 10.1016/j.combustflame.2006.12.022.
7. Fatouraie, M., M. Wooldridge, and S. Wooldridge, 2013, "In-Cylinder Particulate Matter and Spray Imaging of Ethanol / Gasoline Blends in a Direct Injection Spark Ignition Engine," SAE Int. J. Fuels Lubr., vol. 6, no. 1, pp. 1-10, doi: 10.4271/2013-01-0259.
8. Fatouraie, M., M. S. Wooldridge, S. T. Wooldridge, and B. R. Petersen, 2015, "Effects of Ethanol on In-Cylinder and Exhaust Gas Particulate Emissions of a Gasoline Direct Injection Spark Ignition Engine," Energy & Fuels, vol. 29, no. 5, pp. 3399-3412, doi: 10.1021/ef502758y.
9. Francqueville, L. De, 2011, "Effects of Ethanol Addition in RON 95 Gasoline on GDI Stratified Combustion," SAE Tech. Pap., no. 2011-24-0055, doi: 10.4271/2011-24-0055.
10. Stevens, E. and R. Steeper, 2001, "Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation," SAE Tech. Pap., no. 2001-01-1203, doi: 10.4271/2001-01-1203.
11. Mathis, U., R. Kaegi, M. Mohr, and R. Zenobi, Aug. 2004, "TEM analysis of volatile nanoparticles from particle trap equipped diesel and direct-injection sparkignition vehicles," Atmos. Environ., vol. 38, no. 26, pp. 4347-4355, doi: 10.1016/j.atmosenv.2004.04.016.
12. Park, S. H., H. J. Kim, H. K. Suh, and C. S. Lee, Dec. 2009, "Atomization and spray characteristics of bioethanol and bioethanol blended gasoline fuel injected through a direct injection gasoline injector," Int. J. Heat Fluid Flow, vol. 30, no. 6, pp. 1183-1192, doi: 10.1016/j.ijheatfluidflow.2009.07.002.
13. Andersen, V. F., J. E. Anderson, T. J. Wallington, S. a. Mueller, and O. J. Nielsen, Apr. 2010, "Distillation Curves for Alcohol-Gasoline Blends," Energy & Fuels, vol. 24, no. 4, pp. 2683-2691, doi: 10.1021/ef9014795.
14. Furey, R. L. and K. L. Perry, 1986, "Vapor Pressures of Mixtures of Gasolines and Gasoline-Alcohol Blends," SAE Tech. Pap., no. 861557, doi: 10.4271/861557.
15. Aleiferis, P. G., D. Richardson, and S. Wallace, 2008, "Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine," SAE Int. J. Fuels Lubr., vol. 1, pp. 893-909, doi: 10.4271/2008-01-1591.
16. Fatouraie, M., 2014, "The Effects of Ethanol / Gasoline Blends on Advanced Combustion Strategies in Internal Combustion Engines," University of Michigan.
17. DDBST, "Dortmund Databank." http://www.ddbst.com/ddbst.html [1 Jan. 2013].
18. Ullmann, F., 2005, Ullmann's Chemical Engineering and Plant Design. John Wiley & Sons Inc.
19. Dernotte, J., C. Hespel, F. Foucher, S. Houill, and C. Mounam-Rousselle, Jun. 2012, "Influence of physical fuel properties on the injection rate in a Diesel injector," Fuel, vol. 96, pp. 153-160, doi: 10.1016/j.fuel.2011.11.073.
20. Zhang, G., M. Xu, Y. Zhang, and W. Zeng, 2011, "Quantitative Measurements of Liquid and Vapor Distributions in Flash Boiling Fuel Sprays using Planar Laser Induced Exciplex Technique," SAE Tech. Pap., no. 2011-01-1879, doi: 10.4271/2011-01-1879.
21. Mojtabi, M., G. Wigley, and J. Helie, 2014, "The effect of flash boiling on the atomization performance of gasoline direct injection multistream injectors," At. Sprays, vol. 24, no. 6, pp. 467-493, doi: 10.1615/AtomizSpr.2014008296.
22. Zeng, W., M. Xu, G. Zhang, Y. Zhang, and D. J. Cleary, May 2012, "Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels," Fuel, vol. 95, pp. 287-297, doi: 10.1016/j.fuel.2011.08.048.
23. Xu, M., Y. Zhang, W. Zeng, G. Zhang, and M. Zhang, Apr. 2013, "Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure," SAE Int. J. Fuels Lubr., vol. 6, no. 1, pp. 137-148, doi: 10.4271/2013-01-1614.
24. Haynes, W. M., 2013, CRC Handbook of Chemistry and Physics, 94th ed. CRC Press.
25. Aleiferis, P. G., J. Serras-Pereira, a. Augoye, T. J. Davies, R. F. Cracknell, and D. Richardson, Oct. 2010, "Effect of fuel temperature on in-nozzle cavitation and spray formation of liquid hydrocarbons and alcohols from a real-size optical injector for direct-injection spark-ignition engines," Int. J. Heat Mass Transf., vol. 53, no. 21-22, pp. 4588-4606, doi: 10.1016/j.ijheatmasstransfer.2010.06.033.
26. Mitroglou, N., J. M. Nouri, Y. Yan, M. Gavaises, and C. Arcoumanis, 2007, "Spray Structure Generated by Multi-Hole Injectors for Gasoline Direct-Injection Engines," SAE Tech. Pap., no. 2007-01-1417, doi: 10.4271/2007-01-1417.