Effects of diesel/PODE (polyoxymethylene dimethyl ethers) blends on combustion and emission characteristics in a heavy duty diesel engine

Fuel

Volumn 177, Issue , 2016, Pages 206-216

  Liu, Jialin ^a   Wang, Hu ^a   Li, Ying ^b   Zheng, Zunqing ^a   Xue, Zhenzhen ^c   Shang, Hongyan ^c   Yao, Mingfa ^a  

^a TIANJIN UNIVERSITY   (China)

^b GUANGXI UNIVERSITY   (China)

^c CHINA UNIVERSITY OF PETROLEUM   (China)

Author keywords

Cetane number; Clean combustion; Fuel property; Polyoxymethylene dimethyl ethers (PODE); Soot emission

Indexed keywords

ACETAL RESINS; ALTERNATIVE FUELS; ANTIKNOCK RATING; BLENDING; DIESEL ENGINES; DUST; ECONOMIC AND SOCIAL EFFECTS; EFFICIENCY; EMISSION CONTROL; ENGINES; ETHERS; EXHAUST GAS RECIRCULATION; EXHAUST GASES; FUELING; FUELS; NITROGEN OXIDES; SELECTIVE CATALYTIC REDUCTION; SOOT;

BRAKE THERMAL EFFICIENCY; CLEAN COMBUSTION; DIMETHYL ETHERS; EMISSION CHARACTERISTICS; EXHAUST GAS RECIRCULATION (EGR); FUEL PROPERTIES; HEAVY-DUTY DIESEL ENGINE; SOOT EMISSIONS;

COMBUSTION;

EID: 84961213100     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2016.03.019     Document Type: Article

References (44)

1. R.D. Reitz Directions in internal combustion engine research Combust Flame 160 1 2013 1 8
2. Johnson TV. Review of vehicular emissions trends. SAE paper 2015-01-0993.
3. A.K. Agarwal Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines Prog Energy Combust Sci 33 3 2007 233 271
4. X.C. Lu, D. Han, and Z. Huang Fuel design and management for the control of advanced compression-ignition combustion modes Prog Energy Combust Sci 37 6 2011 741 783
5. S. Kumar, J.H. Cho, J. Park, and I. Moon Advances in diesel-alcohol blends and their effects on the performance and emissions of diesel engines Renew Sust Energy Rev 22 2013 46 72
6. M. Han The effects of synthetically designed diesel fuel properties-cetane number, aromatic content, distillation temperature, on low-temperature diesel combustion Fuel 109 2013 512 519
7. F. Millo, B.K. Debnath, T. Vlachos, C. Ciaravino, L. Postrioti, and G. Buitoni Effects of different biofuels blends on performance and emissions of an automotive diesel engine Fuel 159 2015 614 627
8. C.C. Barrios, C. Martín, A. Domínguez-Sáez, P. Álvarez, M. Pujadas, and J. Casanova Effects of the addition of oxygenated fuels as additives on combustion characteristics and particle number and size distribution emissions of a TDI diesel engine Fuel 132 2014 93 100
9. S.H. Park, and C.S. Lee Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel Energy Convers Manage 86 2014 848 863
10. S. Moka, M. Pande, M. Rani, R. Gakhar, M. Sharma, J. Rani, and et al. Alternative fuels: An overview of current trends and scope for future Renew Sust Energy Rev 32 2014 697 712
11. S.M. Sarathy, P. Oßwald, N. Hansen, and K. Kohse-Höinghaus Alcohol combustion chemistry Prog Energy Combust Sci 44 2014 40 102
12. V.R. Surisetty, A.K. Dalai, and J. Kozinski Alcohols as alternative fuels: An overview Appl Catal, A 404 1 2011 1 11
13. C. Jin, M. Yao, H. Liu, C.F.F. Lee, and J. Ji Progress in the production and application of n-butanol as a biofuel Renew Sust Energy Rev 15 8 2011 4080 4106
14. Z. Chen, Z. Wu, J. Liu, and C. Lee Combustion and emissions characteristics of high n-butanol/diesel ratio blend in a heavy-duty diesel engine and EGR impact Energy Convers Manage 78 2014 787 795
15. A.C. Hansen, Q. Zhang, and P.W. Lyne Ethanol-diesel fuel blends - A review Bioresour Technol 96 3 2005 277 285
16. L. Serrano, M. Lopes, N. Pires, I. Ribeiro, P. Cascão, L. Tarelho, and et al. Evaluation on effects of using low biodiesel blends in a EURO 5 passenger vehicle equipped with a common-rail diesel engine Appl Energy 146 2015 230 238
17. L. Coniglio, H. Bennadji, P.A. Glaude, O. Herbinet, and F. Billaud Combustion chemical kinetics of biodiesel and related compounds (methyl and ethyl esters): Experiments and modeling - A dvances and future refinements Prog Energy Combust Sci 39 4 2013 340 382
18. Ku Y-Y, Tang T-W, Lin KW, Chan S. The impact upon applicability of metal fuel tank using different biodiesel. SAE paper 2015-01-0521.
19. L. Zhu, C.S. Cheung, W.G. Zhang, and Z. Huang Compatibility of different biodiesel composition with acrylonitrile butadiene rubber (NBR) Fuel 158 2015 288 292
20. Jaroonjitsathian S, Akarapanjavit N, Sa-norh SS, In-ochanon R, Wuttimongkolchai A, Tipdecho C, et al. Evaluation of 5 to 20% biodiesel blend on heavy-duty common-rail diesel engine. SAE paper 2009-01-1894.
21. C.K. Westbrook, W.J. Pitz, and H.J. Curran Chemical kinetic modeling study of the effects of oxygenated hydrocarbons on soot emissions from diesel engines J Phys Chem A 110 21 2006 6912 6922
22. C. Arcoumanis, C. Bae, R. Crookes, and E. Kinoshita The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review Fuel 87 7 2008 1014 1030
23. Sasaki S, Kato M, Yokota T, Konno M, Gill D. An experimental study of injection and combustion with dimethyl ether. SAE paper 2015-01-0932.
24. Lacey P, Naegeli D, De La Cruz J, Whalen M. Lubricity of volatile fuels for compression ignition engines. SAE paper 2000-01-1804.
25. Pellegrini L, Marchionna M, Patrini R, Florio S. Emission performance of neat and blended polyoxymethylene dimethyl ethers in an old light-duty diesel car. SAE paper 2013-01-1035.
26. Pellegrini L, Marchionna M, Patrini R, Beatrice C, Del Giacomo N, Guido C. Combustion behaviour and emission performance of neat and blended polyoxymethylene dimethyl ethers in a light-duty diesel engine. SAE paper 2012-01-1053.
27. Liu HY, Wang Z, Wang JX. Performance, combustion and emission characteristics of polyoxymethylene dimethyl ethers (PODE 3-4)/wide distillation fuel (WDF) blends in premixed low temperature combustion (LTC). SAE paper 2015-01-0810.
28. B. Lumpp, D. Rothe, C. Pastötter, R. Lämmermann, and E. Jacob Oxymethylene ethers as diesel fuel additives of the future MTZ Worldwide 72 3 2011 34 38
29. J. Burger, M. Siegert, E. Ströfer, and H. Hasse Poly(oxymethylene) dimethyl ethers as components of tailored diesel fuel: Properties, synthesis and purification concepts Fuel 89 11 2010 3315 3319
30. H. Liu, Z. Wang, J. Wang, X. He, Y. Zheng, Q. Tang, and et al. Performance, combustion and emission characteristics of a diesel engine fueled with polyoxymethylene dimethyl ethers (PODE3-4)/diesel blends Energy 88 2015 793 800
31. J.B. Heywood Internal combustion engine fundamentals 1988 McGraw-Hill Inc.
32. AVL. The specification of AVL 415S filter smoke number meter. AVL list GMBH, Graz, Austria; 2007.
33. M. Marchionna, and D. Sanfilippo High quality components for clean transportation fuels Hydrocarb Eng 7 7 2002 49 51
34. Sanfilippo D, Patrini R, Marchionna M. Use of an oxygenated product as a substitute of gas oil in diesel engines. US patent app. 10/716,501; 2003.
35. Q. Zhao, H. Wang, Z.-F. Qin, Z.-W. Wu, J.-B. Wu, W.-B. Fan, and et al. Synthesis of polyoxymethylene dimethyl ethers from methanol and trioxymethylene with molecular sieves as catalysts J Fuel Chem Technol 39 12 2011 918 923
36. Patrini R, Marchionna M. Liquid mixture consisting of diesel gas oils and oxygenated compounds. US patent app. 10/373,781; 2003.
37. Yanowitz J, Ratcliff M, McCormick R, Tay J, Murphy M. Compendium of experimental cetane numbers. NREL report: NREL/TP-5400-61693; 2014.
38. Li T, Okabe Y, Izumi H, Shudo T, Ogawa H. Dependence of ultra-high EGR low temperature diesel combustion on fuel properties. SAE paper 2006-01-3387.
39. M. Mangus, F. Kiani, J. Mattson, D. Tabakh, J. Petka, C. Depcik, and et al. Investigating the compression ignition combustion of multiple biodiesel/ULSD (ultra-low sulfur diesel) blends via common-rail injection Energy 89 2015 932 945
40. Padala S, Woo C, Kook S, Hawkes E. Performance improvement of a compression ignition engine by ethanol and diesel dual-fuelling. In: 18th Australasian fluid mechanics conference, Launceston, Australia; 3-7 December; 2012.
41. Francqueville L, Michel J-B. On the effects of EGR on spark-ignited gasoline combustion at high load. SAE paper 2014-01-2628.
42. X.C. Lü, J.G. Yang, W.G. Zhang, and Z. Huang Effect of cetane number improver on heat release rate and emissions of high speed diesel engine fueled with ethanol-diesel blend fuel Fuel 83 14 2004 2013 2020
43. Ruggero A, Tonetti, M., Gioannini, A., Pelassa, M. Combustion technologies to meet Euro 6 emissions standards on a diesel D-segment passenger car. In: Proceedings of the SIA international conference: Le moteur diesel/diesel engine, Rouen-INSA Rouen, France; 2008.
44. I.R. Cloudt, I.R. Baert, I.F. Willems, and M. Vergouwe SCR-only concept for heavy-duty Euro VI applications MTZ Worldwide 70 9 2009 58 63