Fabrication of pre-alloyed Al-Li powders with high Li content via thermal dehydrogenation of LiH and rapid solidification process

Materials and Design

Volumn 94, Issue , 2016, Pages 159-165

  Kim, Sang Hoon ^a,b   Hui, Kwun Nam ^a   Kim, Yong Jin ^b   Lim, Tae Soo ^b   Yang, Dong Yeol ^b   Kim, Ki Bong ^b   Kim, Young Ja ^b   Jang, Gwang Joo ^c   Yang, Sangsun ^b  

^a Pusan National University   (South Korea)

^b Korea Institute of Material Science   (South Korea)

^c Korea Institute of Industrial Technology   (South Korea)

Author keywords

LiH; Pre alloyed Al Li powders; Rapid solidification; Thermal dehydrogenation

Indexed keywords

ALUMINUM ALLOYS; ALUMINUM METALLURGY; BINARY ALLOYS; DEHYDROGENATION; FABRICATION; LITHIUM; LITHIUM COMPOUNDS; LITHIUM METALLOGRAPHY; POWDERS; RAPID SOLIDIFICATION; SPECTROSCOPIC ANALYSIS; THERMOANALYSIS;

AEROSPACE STRUCTURE; POWDER METALLURGICAL; QUALITATIVE ANALYSIS; QUANTITATIVE RESULT; RAPID SOLIDIFICATION PROCESS; RESULTING MATERIALS; THERMAL DEHYDROGENATION; UNIFORM DISTRIBUTION;

ALUMINUM METALLOGRAPHY;

EID: 84958056525     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2016.01.009     Document Type: Article

References (38)

1. Gao C., Gao R., Ma Y. Microstructure and mechanical properties of friction spot welding aluminium-lithium 2A97 alloy. Mater. Des. 2015, 83:719-727.
2. Karamouz M., Azarbarmas M., Emamy M. On the conjoint influence of heat treatment and lithium content on microstructure and mechanical properties of A380 aluminum alloy. Mater. Des. 2014, 59:377-382.
3. Nayan N., Gurao N.P., Murty S.N., Jha A.K., Pant B., Sharma S., et al. Microstructure and micro-texture evolution during large strain deformation of an aluminium-copper-lithium alloy AA 2195. Mater. Des. 2015, 65:862-868.
4. Guérin M., Alexis J., Andrieu E., Blanc C., Odemer G. Corrosion-fatigue lifetime of aluminium-copper-lithium alloy 2050 in chloride solution. Mater. Des. 2015.
5. 2CuLi plates on fracture behavior of Al-3Cu-2Li. Acta Mater. 2015, 87:399-410.
6. Araullo-Peters V., Gault B., de Geuser F., Deschamps A., Cairney J.M. Microstructural evolution during ageing of Al-Cu-Li-alloys. Acta Mater. 2014, 66:199-208.
7. Gault B., Cui X.Y., Moody M.P., De Geuser F., Sigli C., Ringer S.P., et al. Atom probe microscopy investigation of Mg site occupancy within δ' precipitates in an Al-Mg-Li alloy. Scr. Mater. 2012, 66:903-906.
8. Peng Y., Fu Z., Wang W., Zhang J., Wang Y., Wang H., et al. Phase transformation at the interface during joining of an Al-Mg-Li alloy by pulsed current heating. Scr. Mater. 2008, 58:49-52.
9. Heard D.W., Gauvin R., Brochu M. Non-equilibrium solute partitioning in a laser re-melted Al-Li-Cu alloy. Acta Mater. 2013, 61:7432-7436.
10. Steuwer A., Dumont M., Altenkirch J., Birosca S., Deschamps A., Prangnell P., et al. A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld. Acta Mater. 2011, 59:3002-3011.
11. Fox A., Fuller S., Whitman C., Radmilovic V. A powder X-ray diffraction study of a solution treated and ice brine quenched Al-14.25 at.% Li alloy. J. Mater. Res. 1991, 6:712-718.
12. Sun D., Chen S., Mao J., Yang D. Microstructure and deformation behavior of a SiC whisker reinforced aluminum-lithium alloy. Mater. Chem. Phys. 1994, 36:217-221.
13. Srivatsan T.S., Coyne E. Cyclic stress response and deformation behaviour of precipitation-hardened aluminium-lithium alloys. Int. J. Fatigue 1986, 8:201-208.
14. Wang T., Liang C., Chen Z., Zheng Y., Kang H., Wang W. Development of an 8090/3003 bimetal slab using a modified direct-chill casting process. J. Mater. Process. Technol. 2014, 214:1806-1811.
15. MESSER C.E., MELLOR J., KROL J.A., LEVY I.S. Solid-liquid equilibrium: systems of lithium hydride with lithium oxide, calcium hydride, titanium hydride, and zirconium hydride. J. Chem. Eng. Data 1961, 6:328-330.
16. Rioux F. Simple calculation of the lattice energy of lithium hydride. J. Chem. Educ. 1977, 54:555.
17. Chen P., Xiong Z., Luo J., Lin J., Tan K.L. Interaction between lithium amide and lithium hydride. J. Phys. Chem. B 2003, 107:10967-10970.
18. Abbas M.A., Grant D.M., Brunelli M., Hansen T.C., Walker G.S. Reducing the dehydrogenation temperature of lithium hydride through alloying with germanium. Phys. Chem. Chem. Phys. 2013, 15:12139-12146.
19. Akola J., Manninen M. Aluminum-lithium clusters: first-principles simulation of geometries and electronic properties. Phys. Rev. B 2002, 65:245424.
20. Heard D.W., Boselli J., Rioja R., Marquis E.A., Gauvin R., Brochu M. Interfacial morphology development and solute trapping behavior during rapid solidification of an Al-Li-Cu alloy. Acta Mater. 2013, 61:1571-1580.
21. Sheng L., Wang L., Xi T., Zheng Y., Ye H. Microstructure, precipitates and compressive properties of various holmium doped NiAl/Cr(Mo, Hf) eutectic alloys. Mater. Des. 2011, 32:4810-4817.
22. Gupta R., Fabijanic D., Dorin T., Qiu Y., Wang J., Birbilis N. Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying. Mater. Des. 2015, 84:270-276.
23. Fu B., Qin G., Meng X., Ji Y., Zou Y., Lei Z. Microstructure and mechanical properties of newly developed aluminum-lithium alloy 2A97 welded by fiber laser. Mater. Sci. Eng. A 2014, 617:1-11.
24. Chuntonov K., Setina J. New lithium gas sorbents: I. The evaporable variant. J. Alloys Compd. 2008, 455:489-496.
25. Gupta R., Nayan N., Nagasireesha G., Sharma S. Development and characterization of Al-Li alloys. Mater. Sci. Eng. A 2006, 420:228-234.
26. Papazian J., Wagner J., Rooney W. Porosity development during heat treatment of aluminum-lithium alloys. Le J. Phys. Colloq. 1987, 48(C3). (513-C3-519).
27. Chen X., Zhao Z., Liu X., Hao M., Chen A., Tang Z. Hydrogen generation by the hydrolysis reaction of ball-milled aluminium-lithium alloys. J. Power Sources 2014, 254:345-352.
28. Ma Y., Zhou X., Huang W., Thompson G., Zhang X., Luo C., et al. Localized corrosion in AA2099-T83 aluminum-lithium alloy: the role of intermetallic particles. Mater. Chem. Phys. 2015.
29. Balasubramaniam R., Duquette D., Rajan K. On stress corrosion cracking in aluminum-lithium alloys. Acta Metall. Mater. 1991, 39:2597-2605.
30. Yoshimura R., Konno T.J., Abe E., Hiraga K. Transmission electron microscopy study of the evolution of precipitates in aged Al-Li-Cu alloys: the θ' and T1 phases. Acta Mater. 2003, 51:4251-4266.
31. Taguchi N., Kitta M., Sakaebe H., Kohyama M., Akita T. Lithium analysis using reflection EELS for lithium compounds. J. Electron Spectrosc. Relat. Phenom. 2015, 203:40-44.
32. 3 thin films. Chem. Mater. 2011, 23:4669-4675.
33. Lu Y., Crumlin E.J., Veith G.M., Harding J.R., Mutoro E., Baggetto L., et al. In situ ambient pressure X-ray photoelectron spectroscopy studies of lithium-oxygen redox reactions. Sci. Rep. 2012, 2.
34. Davó B., De Damborenea J. Use of rare earth salts as electrochemical corrosion inhibitors for an Al-Li-Cu (8090) alloy in 3.56% NaCl. Electrochim. Acta 2004, 49:4957-4965.
35. Shpil'rain E., Amoretty S. Thermophysical Properties of Lithium Hydride, Deuteride, and Tritide and of Their Solutions with Lithium 1987, Springer Science & Business Media.
36. 2 + 1.2LiH) system. J. Alloys Compd. 2011, 509:7143-7151.
37. United States.Department of Energy, Jeppson D. Lithium Literature Review: Lithium's Properties and Interactions 1978, Department of Energy.
38. Engbæk J., Nielsen G., Nielsen J.H., Chorkendorff I. Growth and decomposition of lithium and lithium hydride on nickel. Surf. Sci. 2006, 600:1468-1474.