Environmental sustainability assessment of the management of municipal solid waste incineration residues: A review of the current situation

Clean Technologies and Environmental Policy

Volumn 17, Issue 5, 2015, Pages 1333-1353

  Margallo, María ^a   Taddei, Maria Beatrice Massoli ^b   Hernández Pellón, Ana ^a   Aldaco, Rubén ^a   Irabien, Ángel ^a  

^a UNIVERSITY OF CANTABRIA   (Spain)

^b SAPIENZA UNIVERSITY OF ROME   (Italy)

Author keywords

Bottom ash; Fly ash; Life cycle assessment; Municipal solid waste incineration

Indexed keywords

AGRICULTURAL ROBOTS; AIR POLLUTION; AIR POLLUTION CONTROL; ALUMINA; ALUMINUM OXIDE; ARTIFICIAL LIFE; ASH HANDLING; ASHES; CALCIUM OXIDE; CHLORINE COMPOUNDS; ENVIRONMENTAL IMPACT ASSESSMENTS; ENVIRONMENTAL MANAGEMENT; FLY ASH; HAZARDOUS MATERIALS; HAZARDS; HEAVY METALS; LIFE CYCLE; SILICA; SUSTAINABLE DEVELOPMENT; WASTE INCINERATION; WASTE MANAGEMENT;

AIR POLLUTION CONTROL (APC) RESIDUE; BOTTOM ASH; CHEMICAL AND PHYSICAL PROPERTIES; ELEVATED CONCENTRATIONS; ENVIRONMENTAL ASSESSMENT; ENVIRONMENTAL SUSTAINABILITY; LIFE CYCLE ASSESSMENT (LCA); MUNICIPAL SOLID WASTE (MSW);

MUNICIPAL SOLID WASTE;

EID: 84957848038     PISSN: 1618954X     EISSN: 16189558     Source Type: Journal    
DOI: 10.1007/s10098-015-0961-6     Document Type: Article

References (215)

1. Abdulahi M (2009) Municipal solid waste incineration bottom ash as road construction material. AU J Technol 13(2):121-128
2. Aberg A, Kumpiene J, Ecke H (2006) Evaluation and prediction of emissions from a road built with bottom ash from municipal solid waste incineration (MSWI). Sci Total Environ 355:1-12
3. Alba N, Gassó S, Lacorte T, Baldasano JM (1997) Characterization of municipal solid waste incineration residues from facilities with different air pollution control systems. Air Waste Manag 47:1170-1179
4. Alba N, Vàzquez E, Gassò S, Baldasano JM (2001) Stabilization/solidification of MSW incineration residues from facilities with different air pollution control systems. Durability of matrices versus carbonation. Waste Manag 21:313-323
5. Alinnor IJ (2007) Adsorption of heavy metal ions from aqueous solution by fly ash. Fuel 86:853-857
6. Allegrini E, Boldrin A, Kallesoe J, Astrup TF (2014) LCA of metal recovery from waste incineration bottom ash. In: 5th international conference on engineering for waste and biomass valorisation, session LCA of MSW treatment options, num. 32
7. Amin AW, Sherif FK, El-Atar H, Ez-Eldin H (2009) Residual effect of sewage sludge on soil and several yield parameters of Zea mays. Res J Environ Toxicol 3(2):86-93
8. Andreola F, Barbieri L, Hreglich S, Lancellotti I, Morselli L, Passarin FI, Vassura I (2008) Reuse of incinerator bottom and fly ashes to obtain glassy materials. J Hazard Mater 153:1270-1274
9. Appendino P, Ferraris M, Matekorits I, Salvo M (2004) Production of glass-ceramic bodies from the bottom ashes of municipal solid waste incinerators. J Eur Ceram Soc 24(5):803-810
10. Aranda-Usón A, Ferreira G, López-Sabirón AM, Sastresa EL, De Guinoa AS (2012) Characterisation and environmental analysis of sewage sludge as secondary fuel for cement manufacturing. Chem Eng Trans 29:457-462
11. Arce R (2009) Gestión de lodos de cabina de pintura mediante tecnologías de solidificación/estabilización. PhD thesis. University of Cantabria
12. Arickx S, De Borger V, Van Gerven T, Vandecasteele C (2010) Effect of carbonation on the leaching of organic carbon and copper from MSWI bottom ash. Waste Manag 30:1296-1302
13. Arm M (2004) Variation in deformation properties of processed MSWI bottom ash: results from triaxial tests. Waste Manag 24:1035-1042
14. Astrup T (2007) Pretreatment and utilization of waste incineration bottom ashes: danish experiences. Waste Manag 27:1452-1457
15. 2 uptake and metal releases from incineration APC residues. Waste Manag 29:2994-3003
16. Barberio G, Buttol P, Masoni P, Scalbi S, Andreola F, Barbieri L, Lancelloti I (2010) Use of incinerator bottom ash for frit production. J Ind Ecol 12(2):200-213
17. Barbieri L, Corradi A, Lancellotti I (2001) Wastes-based glasses and glass ceramics. Materiales de Construcción 51:197-208
18. Bayat B (2002) Combined removal of zinc(ii) and cadmium(ii) from aqueous solutions by adsorption onto high-calcium Turkish fly ash. J Water Air Soil Pollut 136:69-92
19. Bayuseno A, Schmahl W (2011) Characterization of MSWI fly ash through mineralogy and water extraction. Resour Conserv Recycl 55:524-534
20. Becquart F, Bernard F, Abriak NE, Zentar R (2009) Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction. Waste Manag 29(4):1320-1329
21. Bertolini L, Carsana M, Cassago D, Curzio AQ, Collepardi M (2004) MSWI ashes as mineral additions in concrete. Cem Concr Res 34(10):1899-1906
22. Birgisdóttir H (2005) Life cycle model for road construction and use of residues from waste incineration. PhD thesis. Institute of Environment and Resource, Technical University of Denmark
23. Birgisdóttir H, Pihl KA, Bhander G, Haushild MZ, Christensen TH (2006) Environmental assessment of roads constructed with and without bottom ash from municipal solid waste incineration. Transp Res 11(D):358-368
24. Birgisdóttir H, Bhander G, Haushild MZ, Christensen TH (2007) Life cycle assessment of disposal of residues from municipal solid waste incineration: recycling of bottom ash in road construction or landfilling in Denmark evaluated in the ROAD-RES model. Waste Manag 27:75-84
25. Boesch ME, Vadenbo C, Saner D, Huter C, Hellweg S (2013) An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland. Waste Manag 34(2):378-389
26. Bontempi E, Zacco A, Borgese L, Gianoncelli A, Ardesi R, Depero LE (2010) A new method for Municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica. J Environ Monit 12:2093-2099
27. Bosio A, Rodella N, Depero LE, Bontempi E (2014a) Rice husk ash based composites, obtained by toxic fly ash inertization and their applications as adsorbents. Chem Eng Trans 37:631-636
28. 2 sequestration. Chem Eng J 253:377-384
29. Chandler AJ, Eighmy TT, Hartlén J, Hjelmar O, Kosson DS, Sawell SE, van der Sloot HA, Vehlow J (1997) Municipal solid waste incinerator residues, studies in environmental science, vol 67. Elsevier Science, Amsterdam
30. Chang F, Wey M (2006) Comparison of the characteristics of bottom and fly ashes generated from various incineration processes. J Hazard Mater B138:594-603
31. Chen D, Christensen TH (2010) Life Cycle Assessment (EASEWASTE) of two municipal solid waste incineration technologies in China. Waste Manag Res 28(6):508-519
32. Chen W, Chang F, Shen Y, Tsai M, Ko C (2012) Removal of chloride from MSWI fly ash. J Hazard Mater 237-238:116-120
33. Cheng TW (2004) Combined glassification of EAF dust and incinerator fly ash. Chemosphere 50:47-51
34. Chiang K, Hu Y (2010) Water washing effects on metals emission reduction during municipal solid waste incinerator (MSWI) fly ash melting process. Waste Manag 30:831-838
35. Chiang YW, Ghyselbrecht K, Santos RM, Meesschaert B, Martens JA (2012) Synthesis of zeolitic-type adsorbent material from municipal solid waste incinerator bottom ash and its application in heavy metal adsorption. Catal Today 190:23-30
36. Chimenos JM, Segarra M, Fernández MA, Espiell F (1999) Characterisation of the bottom ash in municipal solid waste incineration. J Hazard Mater 64:211-222
37. Chimenos JM, Fernández AI, Cervantes A, Miralles L, Fernández MA, Espiell F (2005) Optimizing the APC residue washing process to minimize the release of chloride and heavy metals. Waste Manag 25:686-693
38. Cioffi R, Colangelo F, Montagnaro F, Santoro L (2011) Manufacture of artificial aggregate using MSWI bottom ash. Waste Manag 31(2):281-288
39. Collepardi M, Collepardi S, Ongaro D, Curzio AQ, Sammartino M (2010) Concrete with bottom ash from municipal solid wastes incinerators. In: 2nd international conference on sustainable construction materials and technologies, pp 289-298
40. Cossu R, Lai T, Pivnenko K (2012) Waste washing pre-treatment of municipal and special waste. J Hazard Mater 207-208:65-72
41. Costa G, Baciocchi R, Polettini A, Pomi R, Hills CD, Carey PJ (2007) Current status and perspectives or accelerated carbonation processes on municipal waste combustion residues. Environ Monit Assess 135:55-75
42. Crannel BS, Eighmy TT, Krzanowski JE, Dykstra Eusden J Jr, Shaw EL, Francis CA (2000) Heavy metal stabilization in municipal solid waste combustion bottom ash using soluble phosphate. Waste Manag 20:135-148
43. Dabo D, De Badreddine Windt L, Drouadaine I (2009) Ten-years chemical evolution of leachate and municipal solid waste incineration bottom ash used in a test road site. J Hazard Mater 172:904-913
44. Danish Environmental Protection Agency (1997) Dioxins - sources, levels and exposures in Denmark
45. De Boom A, Degrez M (2012) Belgian MSWI fly ashes and APC residues: a characterisation study. Waste Manag 32:1163-1170
46. De Boom A, Degrez M, Hubaux P, Lucion C (2011) MSWI boiler fly ashes: magnetic separation for material recovery. Waste Manag 31:1505-1513
47. De Boom A, Aubert J, Degrez M (2014) Carbonation of municipal solid waste incineration electrostatic precipitator fly ashes in solution. Waste Manag Res 32:406-413
48. De Windt L, Dabo D, Lidelow S, Badreddine R, Lagerkvist A (2011) MSWI bottom ash used as basement at two pilot-scale roads: Comparison of leachate chemistry and reactive transport modeling. Waste Manag 31:267-280
49. del Valle-Zermeño R, Formosa J, Chimenos JM, Martínez M, Fernández AI (2013) Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material. Waste Manag 33:621-627
50. Derie R (1996) A new way to stabilize fly ash from municipal incinerators. Waste Manag 16(8):711-716
51. Dijkstra JJ, Van Zomeren A, Meeussen JCL (2006) Effect of accelerated aging of MSWI bottom ash on the leaching mechanisms of copper and molybdenum. Environ Sci Technol 40:4481-4487
52. Duxson P, Fernández-Jiménez A, Provis JL, Lukey GC, Palomo A, van Deventer JSJ (2007) Geopolymer technology: the current state of the art. J Mater Sci 42:2917-2933
53. Ecke H (2003) Sequestration of metals in carbonated municipal solid waste incineration (MSWI) fly ash. Waste Manag 23:631-640
54. Ecoinvent (2008) The life cycle inventory data version 2.0. Swiss Center for Life Cycle Inventories. www.ecoinvent.ch. Accessed 10 Nov 2014
55. Environmental Agency of UK (2002) Solid residues from municipal waste incinerators in England and Wales
56. Fabrellas B, Sanz P, Abad E, Rivera J (1999) The Spanish dioxin inventory: proposal and preliminary results from municipal waste incinerator emissions. Organohalog Compd 41:491-494
57. FederAmbiente and ENEA (2009) Italian National Agency for New Technology, Energy and the Environment. Technical report on energy recovery from municipal waste in Italy, second edition
58. Fedje KK, Ekberg C, Skarnemark G, Steenari BM (2010) Removal of hazardous metals from MSW fly ash - an evaluation of ash leaching methods. J Hazard Mater 173:310-317
59. Ferreira C, Ribeiro A, Ottosen L (2003) Possible applications for municipal solid waste fly ash. J Hazard Mater B96:201-216
60. Ferreira C, Jensen P, Ottosen L, Ribeiro A (2005) Removal of selected heavy metals from MSW fly ash by the electrodialytic process. Eng Geol 77:339-347
61. Finnveden G, Hauschild MZ, Ekvall T, Guinée J, Heijungs R, Hellweg S, Koehler A, Pennington D, Suh S (2009) Recent developments in Life Cycle Assessment. J Environ Manag 91:1-21
62. Forteza R, Far M, Seguí C, Cerdá V (2004) Characterization of bottom ash in municipal solid waste incinerators for its use in road base. Waste Manag 24:899-909
63. Freyssinet P, Piantone P, Azaroual M, Itard Y, Clozel-Leloup B, Guyonnet D (2002) Chemical changes and leachate mass balance of municipal solid waste bottom ash submitted to weathering. Waste Manag 22:159-172
64. Fuoco R, Ceccarini A, Tassone P, Wei Y, Brongo A, Francesconi S (2005) Innovative stabilization/solidification processes of fly ash from an incinerator plant of urban solid waste. Microchem J 79:29-35
65. Gandhimathi R, Ramesh ST, Sindhu V, Nidheesh PV (2012) Single and tertiary system dye removal from aqueous solution using bottom ash: kinetic and isotherm studies. Iranica J Energy Environ 3(1):35-45
66. Gao X, Wang W, Ye T, Wang F, Lan Y (2008) Utilization of washed MSWI fly ash as partial cement substitute with the addition of dithiocarbamic chelate. J Environ Manag 88:293-299
67. García-Gusano D, Herrera I, Garraín D, Lechón Y, Cabal H (2015) Life cycle assessment of the Spanish cement industry: implementation of environmental-friendly solutions. Clean Technol Environ Policy 17:59-73
68. Geng C, Chen D, Wenzhou S, Liu Pu (2010) Life cycle assessment for roadbase construction using bottom ash from municipal solid waste incineration in Shanghai. In: International conference on e-product e-service and e-entertainment (ICEEE2010), num. 5660547
69. Gines O, Chimenos JM, Vizcarro A, Formosa J, Rosell JR (2009) Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: environmental and mechanical considerations. J Hazard Mater 169:643-650
70. Giugliano M, Grosso M, Rigamonti L (2008) Energy recovery from municipal waste: A case study for a midle-size Italian district. Waste Manag 28(1):39-50
71. Grosso M, Rigamonti L, Biganzoli L, Schiona G (2010) Metals recovery from incineration bottom ashes: futures opportunities in Italy. In: International conference on hazardous and industrial waste management, pp 1-9
72. Guarienti M, Gianoncelli A, Bontempi E, Moscoso Cardozo S, Borgese L, Zizioli D, Mitola S, Depero LE, Presta M (2014) Biosafe inertization of municipal solid waste incinerator residues by COSMOS technology. J Hazard Mater 279:311-321
73. Guohua NI, Zhao P, Jiang Y, Meng Y (2012) Vitrification of MSWI fly ash by thermal plasma melting and fate of heavy metals. Plasma Sci Technol 14(9):813-818
74. Gupta VK, Ali I, Saini VK, Van Gerven T, Van der Bruggen B, Vandecasteele C (2005) Removal of dyes from wastewater using bottom ash. Ind Eng Chem Res 44:3655-3664
75. Haiying Z, Youcai Z, Jingyu Q (2007) Study on use of MSWI fly ash in ceramic tile. J Hazard Mater 141:106-114
76. Haiying Z, Youcai Z, Jingyu Q (2010) Thermal characterization of fly ash from one municipal solid waste incinerator (MSWI) in Shanghai. Process Saf Environ Prot 88:269-275
77. Hassan HF (2005) Recycling of municipal solid waste incinerator ash in hot-mix asphalt concrete. Constr Build Mater 19:91-98
78. Haugsten KE, Gustavson B (2000) Environmental properties of vitrified fly ash from hazardous and municipal waste incineration. Waste Manag 20:167-176
79. He PJ, Zhang CH, Lee DJ (2004) Characteristics of air pollution control residues of MSW incineration plant in Shanghai. J Hazard Mater B116:229-237
80. Hjelmar O (1996) Disposal strategies for municipal solid waste incineration residues. J Hazard Mater 47:345-368
81. Hong KJ, Tokunaga S, Ishigami Y, Kajiuchi T (2000) Extraction of heavy metals from MSW incinerator fly ash using saponins. Chemosphere 41:345-352
82. Hong J, Li X, Zhaojie C (2010) Life cycle assessment of four municipal solid waste management scenarios in China. Waste Manag 30:2362-2369
83. Hou X, Ma X (2007) Research on Disposing of Landfill Leachate Polluted by Heavy Metal Using Incineration Ashes of Burning Rubbish. J Subtrop Resour Environ 2(2):30-36
84. Huang Y,Bird R, Heidrich O (2009) Development of a life cycle assessment tool for construction and maintenance of asphakt pavements. J Clean Prod 17:283-296
85. Huntzinger DH, Eatmon TD (2009) A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies. J Clean Prod 17:668-675
86. Hyun J-S, Park J-W, Maken S, Park JJ (2004) Vitrification of Fly and Bottom Ash from Municipal Solid Waste Incinerator using Brown's Gas. J Ind Eng Chem 10(3):361-367
87. IChemE (2002) The sustainability metrics. Sustainable development progress metrics recommended for use in the process industries. The Institution of Chemical Engineers, Rugby
88. Irabien A, Olmo IF, Andrés A (2002) Binders based on cement/glassy combustion residues for the stabilisation/solidification of industrial wastes. J Chem Techn Biotechnol 77:326-330
89. ISO (2006) ISO 14040: Environmental management - life cycle assessment - principles and framework. International Organization for Standardization, Geneva
90. Ito R, Fujita T, Sadaki J, Matsumoto Y, Ahn JW (2006) Removal of chloride in bottom ash from the industrial and municipal solid waste incinerators. Int J Soc Mater Eng Resour 13(2):70-74
91. Jian-guo J, Xin X, Jun W, Shi-jian Y, Yan Z (2007) Investigation of basic properties of fly ash from urban waste incinerators in China. J Environ Sci 19:458-463
92. Jianguo J, Maozhe C, Yan Z, Xin X (2009) Pb stabilization in fresh fly ash from municipal solid waste incinerator using accelerated carbonation technology. J Hazard Mater 161:1046-1051
93. Jing Z, Matsuoka N, Jin F, Hashida T (2007) Municipal incineration bottom ash treatment using hydrothermal solidification. Waste Manag 27:287-293
94. JSRRI, Japan Synchroton Radiation Research Institute (2000-2001) Direct speciation of copper, lead, antimony, zinc and chromium in municipal solid waste incinerator fly ash by X-ray adsorption fine structure spectroscopy. In Spring-8 Res Front 65-67. www.spring8.or.jp/e/publication/res-fro/RF00-01/065-067.pdf. Accessed 18 Nov 2014
95. Jung CH, Matsuto T, Tanaka N, Okada T (2004) Metal distribution in incineration residues of municipal solid waste (MSW) in Japan. Waste Manag 24:381-391
96. Juric B, Hanzic L, Ilic R, Samec N (2006) Utilization of municipal solid waste bottom ash and recycled aggregate in concrete. Waste Manag 26:1436-1442
97. Kalmykova Y, Karlfeldt Fedje K (2013) Phosphorus recovery from municipal solid waste incineration fly ash. Waste Manag 33:1403-1410
98. Katsuura H, Inoue T, Hiraoka M, Sakai S (1996) Full-scale plant study on fly ash treatment by the acid extraction procedure. Waste Manag 16(5/6):491-499
99. Keppert M, Pavlik Z, Cerny R, Reiterman P (2012) Properties of concrete with municipal solid waste incinerator bottom ash. Int Proc Comput Sci Inf Technol 28:127-131
100. Kim J-M, Kim H-S (2004) Glass-ceramic produced from a municipal waste incinerator fly ash with high Cl content. J Eur Ceram Soc 24:2373-2382
101. Ko M, Chen Y, Wei P (2013) Recycling of municipal solid waste incinerator fly ash by using hydrocyclone separation. Waste Manag 33:615-620
102. Kulkarni PS, Crespo JG (2008) Dioxins sources and current remediation technologies - a review. Environ Int 34(1):139-153
103. Kumagai S, Koda S, Miyakita T (2001) Estimation of dioxin exposure concentrations and dioxin intakes of workers at continuously burning municipal waste incinerators. J Occup Health 43(2):61-69
104. Kuo N-W, Ma H-W, Yang Y-M, Hsiao T-Y, Huang C-M (2007) An investigation on the potential of metal recovery from the municipal waste incinerator in Taiwan. Waste Manag 27(11):1673-1679
105. Kuo W-T, Liu C-C, Wang H-Y, Shu C-Y (2013) Characteristics of compressed concrete paving units produced from washed municipal solid waste incinerator bottom ash. Adv Mater Res 723:588-593
106. Lam CHK, Ip AW, Barford JP, McKay G (2010) Use of incineration MSW ash: a review. Sustain 2:1943-1968
107. Landreth RE, Reber PA (1997) Municipal solid wastes: problems and solutions. CRC Press, Boca Raton
108. Laurent A, Clavreul J, Berstad A, Bakas I, Niero M, Emmanuel G, Christensen TH, Hauschild M (2014) Review of LCA studies of solid waste management systems-Part II: methodological guidance for better practice. Waste Manag 34:589-606
109. Lee T, Chang C, Rao M, Su X (2011) Modified MSWI ash-mix slag for use in cement concrete. Constr Build Mater 25:1513-1520
110. Li M, Hu S, Xiang J, Sun L, Li P, Su S, Sun X (2003) Characterization of fly ashes from two Chinese municipal solid waste incinerators. Energy Fuel 17:1487-1491
111. Li M, Xiang J, Hu S, Sun L, Su S, Li P, Sun X (2004) Characterization of solid residues from municipal solid waste incinerator. Fuel 83(10):1397-1405
112. Li X, Lv Y, Ma B, Chen Q, Yin X, Jian S (2012) Utilization of municipal solid waste incineration bottom ash in blended cement. J Clean Prod 32:96-100
113. Liao W, Yang R, Zhou Z, Huang J (2014) Electrokinetic stabilization of heavy metals in MSWI fly ash after water washing. Environ Progress Sustain Energy 33(4):1235-1241
114. Lidelow S, Lagerkvist A (2007) Evaluation of leachate emissions from crushed rock and municipal solid waste incineration bottom ash used in road construction. Waste Manag 27:1356-1365
115. Lima AT, Ottosen LM, Pedersen AJ, Ribeiro AB (2008) A characterization of fly ash from bio and municipal waste. Biomass Bioenergy 32(3):277-282
116. Lima AT, Ottosen LM, Ribeiro AB (2012) Assessing fly ash treatment: remediation and stabilization of heavy metals. J Environ Manag 95:110-115
117. Ling YC, Hon Peter CC (1998) A Taiwanese study of 2, 3, 7, 8-substituted PCDD/DFs and coplanar PCBs in fly ashes from incinerators. J Hazard Mater 58:83-91
118. Liu F, Liu JG, Yu QF, Nie YF (2004) Chemical speciation and mobility of heavy metals in municipal solid waste incinerator fly ash. J Environ Sci 16:885-888
119. Liu W, Hou H, Zhang C (2009) Feasibility study on solidification of municipal solid waste incinerator fly ash with circulating fluidized bed combustion coal fly ash. Waste Manag Res 27:258-266
120. Liu Y, Wang J, Xiang L, Wang L, Shan Z, Wei Y (2012) Microstructures and thermal properties of municipal solid waste incineration fly ash. J Cent South Univ 19:855-862
121. Lo HM, Chiu HY, Lo SW, Lo FC (2012) Effects of different SRT on anaerobic digestion of MSW dosed with various MSWI ashes. Bioresour Technol 125:233-238
122. Lundin L, Marklund S (2008) Distribution of mono to octa-chlorinated PCDD/Fs in fly ash from a municipal solid-waste incinerator. Env Sci Technol 42(4):1245-1250
123. Lundtorp K, Jensen DL, Christensen TH (2002) Stabilization of APC residues from waste incineration with ferrous sulfate on a semi-industrial scale. J Air Waste Manag Assoc 52:722-731
124. Ma G, Zhang H (2013) Washing of the ash from one shanghai plant using phosphoric acid. Adv Mater Res 664:228-231
125. Mangialardi T (2003) Disposal of MSWI fly ash through a combined washing-immobilisation process. J Hazard Mater 98:225-240
126. Margallo M (2014) Life cycle model of waste to energy technologies in Span and Portugal. PhD thesis. University of Cantabria
127. Margallo M, Aldaco R, Bala A, Fullana P, Irabien A (2010) Implementation of the selective collection in small villages of less than 50 Inhabitants in Cantabria region (Spain): preliminary viability study. Chem Eng Trans 21:733-738
128. Margallo M, Aldaco R, Irabien A (2013) Life cycle assessment of bottom ash management from municipal solid waste incinerator (MSWI). Chem Eng Trans 35:871-876
129. Margallo M, Aldaco R, Irabien A (2014a) Environmental management of bottom ash from municipal solid waste incineration based on a life cycle assessment approach. Clean Techn Environ Policy 16(7):1319-1328
130. Margallo M, Aldaco R, Irabien A (2014b) A case study for environmental impact assessment in the process industry: municipal Solid Waste Incineration (MSWI). Chem Eng Trans 39:613-618
131. Massardier V, Moszkowicz P, Taha M (1997) Fly ash stabilization-solidification using polymer-concrete double matrices. Eur Polym J 33:1081-1086
132. McDougall FR, White PR, Franke M, Hindle P (2001) Integrated solid waste management: a life cycle inventory. Blackwell Science, Malden
133. Meima JA, Comans R (1999) The leaching of trace elements from municipal solid waste incinerator bottom ash at different stages of weathering. Appl Geochem 14:159-171
134. Mizutani S, Sakai S, Takatsuki H (2000) Leaching behaviors of heavy metals from MSWI residues and Pb adsorption onto the residues under alkaline conditions. Waste Manage Ser 1(C):726-732
135. Moller J, Munk B, Crillesen K, Christensen TH (2011) Life Cycle Assessment of selective non-catalytic reduction (SNCR) of nitrous oxides in a full-scale municipal solid waste incinerator. Waste Manag 31(6):1184-1193
136. Monash P, Pugazhenthi G (2009) Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature. Adsorption 15:390-405
137. Monteiro RCC, Figueiredo CF, Alendouro MS, Ferro MC, Davim EJR, Fernandes MHV (2008) Characterization of MSWI bottom ashes towards utilization as glass raw material. Waste Manag 28(7):1119-1125
138. Nakamura K, Kinoshita S, Takatsuki H (1996) The origin and behavior of lead, cadmium and antimony in msw incinerator. Waste Manag 15(5-6):509-517
139. Okada T, Tojo Y, Tanaka N, Matsuto T (2007) Recovery of zinc and lead from fly ash from ash-melting and gasification-melting processes of MSW - comparison and applicability of chemical leaching methods. Waste Manag 27:69-80
140. Olsson S, Kärrman E, Gustafsson JP (2006) Environmental systems analysis of the use of bottom ash from incineration of municipal waste for road construction. Res Conserv Recycl 48:26-40
141. Ondova M, Stevulova N (2013) Environmental assessment of fly ash concrete. Chem Eng Trans 35:841-846
142. Onori R, Polettini A, Pomi R (2011) Mechanical properties and leaching modeling of activated incinerator bottom ash in Portland cement blends. Waste Manag 31:298-310
143. Osako M, Kim YJ, Lee DH (2002) A pilot and field investigation on mobility of PCDDs/PCDFs in landfill site with municipal solid waste incineration residue. Chemosphere 48:849-856
144. Pan JR, Huang C, Kuo JJ, Lin SH (2008) Recycling MSWI bottom and fly ash as raw materials for Portland cement. Waste Manag 28:1113-1118
145. Pan Y, Wu Z, Zhou J, Zhao J, Ruan X, Liu J, Qian G (2013) Chemical characteristics and risk assessment of typical municipal solid waste incineration (MSWI) fly ash in China. J Hazard Mater 261:269-276
146. Park YJ (2009) Stabilization of a chlorine-rich fly ash by colloidal silica solution. J Hazard Mater 162:819-822
147. PE International (2011) GaBi 4 software and databases for life cycle assessment. GaBi Software System, Leinfelden-Echterdingen
148. Pecqueur G, Crignon C, Quènèe B (2001) Behaviour of cement-treated MSWI bottom ash. Waste Manag 21:229-233
149. Pederson AJ (2002) Evaluation of assisting agents for electrodialytic removal of Cd, Pb, Zn and Cr from MSWI fly ash. J Hazard Mater B95:185-198
150. Pera J, Coutaz L, Ambroise J, Chababbet M (1997) Use of incinerator bottom ash in concrete. Cem Concr Res 27(1):1-5
151. Piantone P, Bodènan F, Derie R, Depelsenaire G (2003) Monitoring the stabilization of municipal solid waste incineration fly ash by phosphation: mineralogical and balance approach. Waste Manag 23:225-243
152. Polettini A, Pomi R, Carcani G (2005) The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture. Resour Conserv Recycl 43:403-418
153. Puccini M, Seggiani M, Vitolo S, Iannelli R (2013) Life cycle assessment of remediation alternatives for dredged sediments. Chem Eng Trans 35:781-786
154. Puma S, Marchese F, Dominijanni A, Manassero M (2013) Reuse of MSWI bottom ash mixed with natural sodium bentonite as landfill cover material. Waste Manag Res 31:577-584
155. Qian G, Cao Y, Chui P, Joohwa T (2006) Utilization of MSWI fly ash for stabilization/solidification of industrial waste sludge. J Hazard Mater B129:274-281
156. Quenee B, Li G, Siwak JM, Basuyau V (2000) The use of MSWI (Municipal solid waste incineration) bottom ash as aggregates in hydraulic concrete. Waste Manage Ser 1(C):422-437
157. Quina MJ, Bordado JC, Quinta-Ferreira RM (2008a) Treatment and use of air pollution control residues from MSW incineration: an overview. Waste Manag 28:2097-2121
158. Quina MJ, Santos RC, Bordado JC, Quinta-Ferreira RM (2008b) Characterization of air pollution control residues produced in a municipal solid waste incinerator in Portugal. J Hazard Mater 152:853-869
159. Rawlings RD, Wu JP, Boccaccini AR (2006) Glass-ceramics: their production from wastes - a review. J Mater Sci 41(3):733-761
160. Reijnders L (2005) Disposal, uses and treatments of combustion ashes: a review. Res Conserv Recycl 43:313-336
161. Rendek E, Ducom G, Germain P (2007) Influence of waste input and combustion technology on MSWI bottom ash quality. Waste Manag 27:1403-1407
162. Rodella N, Bosio A, Dalipi R, Zacco A, Borgese L, Depero LE, Bontempi E (2014) Waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash. Arabian J Chem (in press). doi: 10.1016/j.arabjc.2014.04.006
163. Rogbeck J, Hartlén J (1996) Ash gravel - a material for recycling. Waste Manag 16(1-3):109-112
164. Ruiz MC, Andrés A, Irabien A (2003) Environmental assessment of cement/foundry sludge products. Environ Technol 24:589-596
165. Sabbas T, Polettini A, Pomi R, Astrup T, Hjelmar O, Mostbauer P, Cappai G, Magel G, Salhofer S, Speose C, Heuss-Assbichler S, Klein R, Lechner P (2003) Management of municipal solid waste incineration residues. Waste Manag 23:61-88
166. Saikia N, Kato S, Kojima T (2007) Production of cement clinkers from municipal solid waste incineration (MSWI) fly ash. Waste Manag 27:1178-1189
167. Sakai S, Hiraoka M (2000) Municipal solid waste incinerator residue recycling by thermal processes. Waste Manag 20:249-258
168. Scarinci G, Brusatin G, Barbieri L, Corradi A, Lancellotti I, Colombo P, Hreglich S, Dall'Igna R (2000) Vitrification of industrial and natural wastes with production of glass fibres. J Eur Ceram Soc 20:2485-2490
169. Schabbach LM, Bolelli G, Andreola F, Lancellotti Barbieri L (2012) Valorization of MSWI bottom ash through ceramic glazing process: a new technology. J Clean Prod 23:147-157
170. Scipioni A, Mazzi A, Niero M, Boatto T (2009) LCA to choose among alternative design solutions: the case study of a new Italian incineration line. Waste Manag 29(9):2462-2474
171. Shareefden Z, Elkamel A, Tse S (2015) Review of current technologies used in municipal solid waste-to energy facilities in Canada. Clean Technol Environ Policy. doi: 10.1007/s10098-015-0904-2
172. Shi HS, Kan LL (2009) Characteristics of municipal solid wastes incineration (MSWI) fly ash-cement matrices and effect of mineral admixtures on composite system. Constr Build Mater 23:2160-2166
173. Shih P, Chang J, Chiang L (2003) Replacement of raw mix in cement production by municipal solid waste incineration ash. Cem Concr Res 33:1831-1836
174. Shim Y, Rhee S, Lee W (2005) Comparison of leaching characteristics of heavy metals from bottom ash and fly ashes in Korea and Japan. Waste Manag 25:473-480
175. Shin KJ, Chang YS (1999) Characterization of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, and heavy metals fly ash produced from Korean municipal solid waste incinerators. Chemosphere 38:2655-2666
176. Song G, Kim K, Seo Y, Kim S (2004) Characterization of ashes from different locations at the MSW incinerator equipped with various air pollution control devices. Waste Mang 24:99-106
177. Sorlini S, Abbà A, Collivignarelli C (2011) Recovery of MSWI and soil washing residues as concrete aggregates. Waste Manag 31(2):289-297
178. Sun Y, Zheng J, Zou L, Liu Q, Zhu P, Qian G (2011) Reducing volatilization of heavy metals in phosphate-pretreated municipal solid waste incineration fly ash by forming pyromorphite-like minerals. Waste Manag 31:325-330
179. Tang P, Florea M, Spiesz P, Brouwers H (2014) The application of treated bottom ash in mortar as cement replacement. EurAsia Waste Manag Symp, Istanbul, pp 1077-1082
180. Todorovic J, Ecke H (2006) Demobilisation of critical contaminants in four typical waste-to-energy ashes by carbonation. Waste Manag 26:430-441
181. Toller S, Källar E, Gustafsson JP, Magnusson Y (2009) Environmental assessment of incineration residue utilisation. Waste Manag 29:2071-2077
182. Tuppurainen K, Halone I, Ruokojarni P, Tarhanen J, Ruuskanen J (1997) Formation of PCDDs and PCDFs in municipal waste incineration and its inhibition mechanisms: A review. Chemosphere 36(7):1493-1511
183. Van Gerven T, Geysen D, Stoffels L, Jaspers M, Wauters G, Vandecasteele C (2005) Management of incinerator residues in Flanders (Belgium) and in neighbouring countries. A comparison. Waste Manag 25:75-87
184. Vehlow J and Seifert H (2012) Management of residues from energy recovery by thermal waste-to-energy systems and quality standards. Report for International Energy Agency (IEA), Bioenergy Task 36 Topic 5. Karlsruher Institut für Technologie
185. Vichaphund S, Jiemsirilers S, Thavarniti P (2012) Sintering of municipal solid waste incineration bottom ash. J Eng Sci 8:51-59
186. Vu DH, Wang K-S, Chen J-H, Nam BX, Bac BH (2012) Glass-ceramic from mixtures of bottom ash and fly ash. Waste Manag 32(12):2306-2314
187. Vyzinkarova D, Allegrini E, Laner D, Astrup TF (2013) Exergy analysis of aluminum recovery from municipal solid waste incineration. In: 3rd international exergy, life cycle assessment, and sustainability workshop & symposium (EKCAS3), Greece. Session 2 (Exergy and industrial systems)
188. Wang Q, Yang J, Wang Q, Wu T (2009) Effects of water-washing pretreatment on bioleaching of heavy metals from municipal solid waste incinerator fly ash. J Hazard Mater 162:812-818
189. Wang L, Jin Y, Nie Y (2010) Investigation of accelerated and natural carbonation of MSWI fly ash with a high content of Ca. J Hazard Mater 174:334-343
190. Wang L, Li R, Li Y, Wei L (2012) Release of soluble salts and heavy metals during the short-time washing process of MSWI fly ash. Adv Mater Res 518-523:3247-3251
191. Wang Y, Liu J, Sun S (2014) Effects of water washing on volatile characteristics of heavy metals in fly ash from a MSW and sewage sludge co-combustion plant. J Central South Univ 45(5):1751-1758
192. Wdovin M, Franus M, Panek R, Badura L, Franus W (2014) The conversion of fly ash into zeolites. Clean Technol Environ Policy 16:1217-1223
193. Wei Y, Shimaoka T, Saffarzadeh A, Takahashi F (2011) Mineralogical characterization of municipal solid waste incineration bottom ash with an emphasis on heavy metal-bearing phases. J Hazard Mater 187:534-543
194. Wei S, Juan W, Qunhui W, Tingji W, Jie Y (2013) Bioleaching of fly ash from municipal solid waste incineration using kitchen waste saccharified solution as culture medium. J Chem Soc Pakistan 35:212-216
195. Wey M-Y, Liu K-Y, Tsai T-H, Chou J-T (2006) Thermal treatment of the fly ash from municipal solid waste incinerator with rotary kiln. J Hazard Mater B137:981-989
196. Wiles CC (1996) Municipal solid waste combustion ash: state-of-the-knowledge. J Hazard Mater 47(13):325-344
197. Wu H, Ting Y (2006) Metal extraction from municipal solid waste (MSW) incinerator fly ash- Chemical leaching and fungal bioleaching. Enzyme Microbiol Technol 38:839-847
198. Wu K, Shi H, Schutter G, Guo X, Ye G (2012) Preparation of alinite cement from municipal solid waste incineration fly ash. Cem Conc Compos 34:322-327
199. Wu C, Sun C, Gau S, Hong C, Chen C (2013) Mechanochemically induced synthesis of anorthite in MSWI fly ash with kaolin. J Hazard Mater 244-245:412-420
200. Xiao Y, Oorsprong M, Yang Y, Voncken JHL (2008) Vitrification of bottom ash from a municipal solid waste incineration. Waste Manag 28:1020-1026
201. Xu Y, Chen Y, Feng Y (2013) Stabilization treatment of the heavy metals in fly ash from municipal solid waste incineration using diisopropyl dithiophosphate potassium. Environ Technol 34(11):1411-1419
202. Xu T, Ramanathan T, Ting Y (2014) Bioleaching of incineration fly ash by Aspergillus niger - precipitation of metallic salt crystals and morphological alteration of the fungus. Biotechnol Rep 3:8-14
203. Xue Q, Li J, Wang P, Liu L, Li Z (2014) Removal of heavy metals from landfill leachate using municipal solid waste incineration fly ash as adsorbent. CLEAN Soil Air Water 41(9999):1-6
204. Yan D, Tang I, Lo I (2014) Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction. Constr Build Mater 64:201-207
205. Yang S, Chiu W, Wang T, Lee W, Chen C, Tzeng A (2009) Asphalt concrete and permeable brick produced from incineration ash using thermal plasma technology. J Environ Eng Manag 19(4):221-226
206. Yang R, Liao W, Wu P (2012) Basic characteristics of leachate produced by various washing processes for MSWI ashes in Taiwan. J Environ Manag 104:67-76
207. Youcai Z, Lijie S, Guojian L (2002) Chemical stabilization of MSW incinerator fly ashes. J Hazard Mater 95:47-63
208. Yvon J, Antenucci D, Jdid E, Lorenzi G, Dutre V, Leclerq D, Nielsen P, Veschkens M (2006) Long-term stability in landfills of Municipal Solid Waste Incineration fly ashes solidified/stabilized by hydraulic binders. J Geochem Explor 90:143-155
209. Zacco A, Gianoncelli A, Ardesi R, Sacrato S, Guerini L, Bontempi E, Tomasoni G, Alberti M, Depero LE (2012) Use of colloidal silica to obtain a new inert from municipal solid waste incinerator (MSWI) fly ash: first results about reuse. Clean Technol Environ Policy 14:291-297
210. Zacco A, Borgese L, Gianoncelli A, Struis R, Depero LE, Bontempi E (2014) Review of fly ash inertisation treatments and recycling. Environ Chem Lett 12:153-175
211. Zhang T, Zhao Z (2014) Optimal use of MSWI bottom ash in concrete. Int J Concr Struct Mater 8(2):173-182
212. Zhang F, Yamasaki S, Nanzyo M (2002) Waste ashes for use in agricultural production: I. Liming effect, contents of plant nutrients and chemical characteristics of some metals. Sci Total Environ 284:215-225
213. Zheng L, Wang C, Wang W, Shi Y, Gao X (2011) Immobilization of MSWI fly ash through geopolymerization: effects of water-wash. Waste Manage 31:311-317
214. Zhu F, Takaoka M, Oshita K, Takeda N (2009) Comparison of two types of municipal solid waste incinerator fly ashes with different alkaline reagents in washing experiments. Waste Manag 29:259-264
215. Zhu F, Takaoka M, Oshita K, Kitajima Y, Inada Y, Morisawa S, Tsuno H (2010) Chlorides behavior in raw fly ash washing experiments. J Hazard Mater 178:547-552