Review of energy harvesters utilizing bridge vibrations

Shock and Vibration

Volumn 2016, Issue , 2016, Pages

  Khan, Farid Ullah ^a   Ahmad, Iftikhar ^a  

^a UNIVERSITY OF ENGINEERING AND TECHNOLOGY   (Pakistan)

Author keywords

[No Author keywords available]

Indexed keywords

ENERGY HARVESTING; NATURAL FREQUENCIES; STRUCTURAL HEALTH MONITORING;

ACCELERATION SENSORS; ACOUSTIC ENERGY; BRIDGE ENVIRONMENTS; BRIDGE VIBRATION; ELECTROMAGNETICS; ENERGY; ENERGY HARVESTER; HEALTH MONITORING; PIEZOELECTRIC; VIBRATION ENERGY HARVESTERS;

SENSOR NODES;

EID: 84956891612     PISSN: 10709622     EISSN: None     Source Type: Journal    
DOI: 10.1155/2016/1340402     Document Type: Review

References (49)

1. A. Hassan and C. Bach, "Improving security connection in wireless sensor networks," International Journal of Innovation and Scientific Research, vol. 2, no. 2, pp. 301-307, 2014.
2. Q. I. Ali, "Simulation framework of wireless sensor network (WSN) using matlab/simulink software," 2012, http://cdn.intechopen.com/pdfs-wm/39337.pdf.
3. K. Sohrabi, J. Gao, V. Ailawadhi, and G. J. Pottie, "Protocols for self-organization of a wireless sensor network," IEEE Personal Communications, vol. 7, no. 5, pp. 16-27, 2000.
4. A. R. Khan, "Energy efficient protocol design issues in wireless sensor networks," Journal of Information and Communication Technology, vol. 4, no. 1, pp. 12-18, 2010.
5. N. Kaur, V. Walia, and R. Malhotra, "Activation matrix oriented base station implementation for energy optimization in wireless sensor networks," International Journal of Computing and Corporate Research, vol. 4, no. 4, 2014.
6. M. Enckell, Lessons learned in structural health monitoring of bridges using advanced sensor technology Ph. D. thesis, Division of Structural Engineering and Bridges, Department of Civil and Architectural Engineering, Royal Institute of Technology (KTH), Stockholm, Sweden, 2011.
7. H. Sohn, C. R. Farrar, F. M. Hemez et al., "Areviewof structural health monitoring literature: 1996-2001," Report LA-13976-MS, Los Alamos National Laboratory, Los Alamos, NM, USA, 2004, https://institute.lanl.gov/ei/shm/pubs/LA 13976 MSa.pdf.
8. J. A. Rice, K. Mechitov, S.-H. Sim et al., "Flexible smart sensor framework for autonomous structural health monitoring," Smart Structures and Systems, vol. 6, no. 5-6, pp. 423-438, 2010.
9. Y. Fujino, D. M. Siringoringo, T. Nagayama, and D. Su, "Control, simulation and monitoring of bridge vibration-Japans recent development and practice," in Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, pp. 61-74, Dhaka, Bangladesh, August 2010.
10. J. Kala, V. Salajka, and P. Hradil, "Footbridge response on single pedestrian induced vibration analysis," World Academy of Science, Engineering and Technology, vol. 3, no. 2, pp. 548-559, 2009.
11. F. Neitzel, B. Resnik, S. Weisbrich, and A. Friedrich, "Vibration monitoring of bridges," Reports on Geodesy, vol. 1, no. 90, pp. 331-340, 2011.
12. T. Galchev, J. McCullagh, R. L. Peterson, and K. Najafi, "A vibration harvesting systemfor bridge healthmonitoring applications," in Proceedings of the 10th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS10), pp. 179-182, Belgium, Leuven, Belgium, November-December 2010.
13. A. M. Abdel-Ghaffar and R. H. Scanlan, "Ambient vibration studies of golden gate bridge: I. Suspended structure," Journal of Engineering Mechanics, vol. 111, no. 4, pp. 463-482, 1985.
14. E. Sazonov, H. Li, D. Curry, and P. Pillay, "Self-powered sensors for monitoring of highway bridges," IEEE Sensors Journal, vol. 9, no. 11, pp. 1422-1429, 2009.
15. T. McEvoy, E. Dierks, J. Weaver et al., "Developing innovative energy harvesting approaches for infrastructure health monitoring systems," in Proceedings of the 37th Design Automation Conference, Parts A and B, pp. 325-339, Washington, DC, USA, August 2011.
16. S.-D. Kwon, J. Park, and K. Law, "Electromagnetic energy harvester with repulsively stacked multilayer magnets for low frequency vibrations," Smart Materials and Structures, vol. 22, no. 5, Article ID 055007, 2013.
17. L. Zhang, X. Yan, and X. Yang, "Vehicle-bridge coupled vibration response study of Huanghe cable-stayed bridge due to multiple vehicles parallel with high speed," in Proceedings of the International Conference on Mechanic Automation and Control Engineering (MACE10), pp. 1134-1137, Wuhan, China, June 2010.
18. B. Jo, Y. Lee, G. Yun, C. Park, and J. Kim, "Vibration-induced energy harvesting for green technology," in Proceedings of the International Conference on Chemical, Environment and Civil Engineering (ICCECE12), pp. 167-170, Manila, Philippines, November 2012.
19. C. E. Dierks, Design of an electromagnetic vibration energy harvester for structural health monitoring of bridges employing wireless sensor networks M. S. thesis, Department of Mechanical Engineering, University of Texas at Austin, Austin, Tex, USA, 2011.
20. S. Boisseau, G. Despesse, T. Ricart, E. Defay, and A. Sylvestre, "Cantilever-based electret energy harvesters," Smart Materials and Structures, vol. 20, no. 10, Article ID 105013, 2011.
21. D. Spreemann, B. Folkmer, D. Mintenbeck, and Y. Manoli, "Novel non-resonant vibration transducer for energy harvesting," in Proceedings of the InternationalWorkshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS05), pp. 144-146, Tokyo, Japan, November 2005.
22. Y. B. Jeon, R. Sood, J.-H. Jeong, and S.-G. Kim, "MEMS power generator with transverse mode thin film PZT," Sensors and Actuators A, vol. 122, no. 1, pp. 16-22, 2005.
23. P. D. Mitcheson, P. Miao, B. H. Stark, E. M. Yeatman, A. S. Holmes, and T. C. Green, "MEMS electrostatic micropower generator for low frequency operation," Sensors and Actuators, A: Physical, vol. 115, no. 2-3, pp. 523-529, 2004.
24. M.-C. Chiu, Y.-C. Chang, L.-J. Yeh, and C.-H. Chung, "Optimal design of a vibration-based electromagnetic energy harvester using a simulated annealing algorithm," Journal of Mechanics, vol. 28, no. 4, pp. 691-700, 2012.
25. M. Bhanusri, "Design and simulation of unimorph piezoelectric energy harvesting system," in Proceedings of the COMSOL Conference, pp. 1-6, Bangalore, India, November 2013.
26. M. Rhimi and N. Lajnef, "Tunable energy harvesting from ambient vibrations in civil structures," Journal of Energy Engineering, vol. 138, no. 4, pp. 185-193, 2012.
27. M. Ericka, D. Vasic, F. Costa, G. Poulin, and S. Tliba, "Energy harvesting from vibration using a piezoelectric membrane," Journal de Physique IV, vol. 128, pp. 187-193, 2005.
28. C. Eichhorn, R. Tchagsim, N. Wilhelm, F. Goldschmidtboeing, and P. Woias, "A compact piezoelectric energy harvester with a large resonance frequency tuning range," in Proceedings of the 10th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power-MEMS10), pp. 207-210, Leuven, Belgium, December 2010.
29. P. D. Mitcheson and T. C. Green, "Maximum effectiveness of electrostatic energy harvesters when coupled to interface circuits," IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 59, no. 12, pp. 3098-3111, 2012.
30. F. Khan, B. Stoeber, and F. Sassani, "Modeling of linear micro electromagnetic energy harvesters with nonuniform magnetic field for sinusoidal vibrations," MicrosystemTechnologies, vol. 21, no. 3, pp. 683-692, 2014.
31. F. Khan, F. Sassani, and B. Stoeber, "Copper foil-type vibrationbased electromagnetic energy harvester," Journal of Micromechanics and Microengineering, vol. 20, no. 12, Article ID 125006, 2010.
32. F. Khan, F. Sassani, and B. Stoeber, "Nonlinear behaviour of membrane type electromagnetic energy harvester under harmonic and random vibrations," Microsystem Technologies, vol. 20, no. 7, pp. 1323-1335, 2014.
33. A. R. M. Foisal and G.-S. Chung, "Fabrication and characterization of a low frequency electromagnetic energy harvester," Journal of Semiconductors, vol. 33, no. 7, Article ID074001, 2012.
34. L. A. Vandewater and S. D. Moss, "Modelling of a bi-axial vibration energy harvester," Report DSTO TN-1174, Defence Science and Technology Organisation, Canberra, Australia, 2013, http://www.dsto.defence.gov.au/sites/default/files/publications/documents/DSTO-TN-1174.pdf.
35. S. P. Beeby, R. N. Torah, M. J. Tudor et al., "A micro electromagnetic generator for vibration energy harvesting," Journal of Micromechanics and Microengineering, vol. 17, no. 7, pp. 1257-1265, 2007.
36. B. Marinkovic and H. Koser, "Smart sand-a wide bandwidth vibration energy harvesting platform," Applied Physics Letters, vol. 94, no. 10, Article ID 103505, 2009.
37. F. U. Khan and I. Ahmad, "Vibration-based electromagnetic type energy harvester for bridgemonitoring sensor application," in Proceedings of the 10th International Conference on Emerging Technologies (ICET14), pp. 125-129, Islamabad, Pakistan, December 2014.
38. C. Peters, J. Handwerker, D. Maurath, and Y. Manoli, "An ultralow-voltage active rectifier for energy harvesting applications," in Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS10), pp. 889-892, Paris, France, June 2010.
39. M.-F. Liu, T.-P. Chang, and D.-Y. Zeng, "The interactive vibration behavior in a suspension bridge systemundermoving vehicle loads and vertical seismic excitations," AppliedMathematical Modelling, vol. 35, no. 1, pp. 398-411, 2011.
40. T. Galchev, H. Kim, and K. Najafi, "Micro power generator for harvesting low-frequency and nonperiodic vibrations," Journal of Microelectromechanical Systems, vol. 20, no. 4, pp. 852-866, 2011.
41. S. Miao, Energy harvesting from wind-induced vibration of suspension bridges M. S. thesis, Department of Civil and Environmental, Massachusetts Institute of Technology, 2013.
42. W. A. Shen and S. Zhu, "A dual-function electromagnetic damper for bridge stay cable vibration mitigation and energy harvesting," in Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC13), Sapporo, Japan, September 2013.
43. M. Peigney and D. Siegert, "Piezoelectric energy harvesting from traffic-induced bridge vibrations," Smart Materials and Structures, vol. 22, no. 9, Article ID095019, 2013.
44. M. H. Amin, Analysis of piezoelectric energy harvesting for bridge health monitoring systems M. S. thesis, Computational Engineering Centre, School of Engineering, University of Swansea, Wales, UK, 2010.
45. Y. Zhang, C. S. Cai, and W. Zhang, "Experimental study of a multi-impact energy harvester under low frequency excitations," Smart Materials and Structures, vol. 23, no. 5, Article ID 055002, 2014.
46. S. F. Ali, M. I. Friswell, and S. Adhikari, "Analysis of energy harvesters for highway bridges," Journal of Intelligent Material Systems and Structures, vol. 22, no. 16, pp. 1929-1938, 2011.
47. J. D. Baldwin, S. Roswurm, J. Nolan, and L. Holliday, "Energy harvesting on highway bridges," Final Report FHWA-OK-11-01, 2011, http://www.okladot.state.ok.us/hqdiv/ p-r-div/spr-rip/library/reports/rad spr2-i2224-fy2010-rpt-finalbaldwin.pdf.
48. J. Li, Structural healthmonitoring of an in-service highway bridge with uncertainties Ph. D. thesis, University of Connecticut, Mansfield, Conn, USA, 2014.
49. S. H. Valluru, Energy harvesting from vibration of a bridge Master of Science Thesis, University of Tennessee, Knoxville, Tenn, USA, 2007.