An unoriented three dimension framework (network) of fibrous porous ceramics prepared by freeze casting

Journal of the European Ceramic Society

Volumn 36, Issue 3, 2016, Pages 797-803

  Xiaohui, Ma ^a,b   Xiaoxia, Hu ^a,b   Haiyan, Du ^a,b   Hanyu, Lv ^b  

^a TIANJIN UNIVERSITY   (China)

^b Tianjin University   (China)

Author keywords

Fibrous porous ceramics; Freeze casting; High temperature stability; Unoriented three dimension framework

Indexed keywords

CERAMIC MATERIALS; SOLS; THERMODYNAMIC STABILITY;

FREEZE CASTING; HIGH TEMPERATURE STABILITY; HIGH-TEMPERATURE ENVIRONMENT; POROUS CERAMICS; THERMAL SHRINKAGE; THREE DIMENSIONS; THREE-DIMENSIONAL DISPERSION; THREE-DIMENSIONAL ORIENTATION;

POROUS MATERIALS;

EID: 84955666736     PISSN: 09552219     EISSN: 1873619X     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2015.10.048     Document Type: Article

References (37)

1. Dong Y., Wang C.A., Zhou J., et al. A novel way to fabricate highly porous fibrous YSZ ceramics with improved thermal and mechanical properties. J. Eur. Ceram. Soc. 2012, 32(10):2213-2218.
2. Wang Y., Liu H.T., Cheng H.F., et al. Characteristics of 3D mullite fibre reinforced silica rich mullite matrix composites fabricated by sol-gel process. Mater. Res. Innov. 2014, 18(S4). S4-460-S4-465.
3. Dong X., Sui G., Liu J., et al. Mechanical behavior of fibrous ceramics with a bird's nest structure. Compos. Sci. Technol. 2014, 100:92-98.
4. Soltani P., Johari M.S., Zarrebini M. Effect of 3D fiber orientation on permeability of realistic fibrous porous networks. Powder Technol. 2014, 254:44-56.
5. Hu L.F., Wang C.A. Effect of sintering temperature on compressive strength of porous yttria-stabilized zirconia ceramics. Ceram. Int. 2010, 36:1697-1701.
6. 4 ceramics. J. Eur. Ceram. Soc. 2013, 33(9):1545-1551.
7. Gordon T., Shyam A., Lara-Curzio E. The relationship between microstructure and fracture toughness for fibrous materials for diesel particulate filters. J. Am. Ceram. Soc. 2010, 93(4):1120-1126.
8. Ohji T., Fukushima M. Macro-porous ceramics: processing and properties. Int. Mater. Rev. 2012, 57(2):115-131.
9. Demir A. Effect of Nicalon SiC fibre heat treatment on short fibre reinforced β-sialon ceramics. J. Eur. Ceram. Soc. 2012, 32(7):1405-1411.
10. Zok F.W., Levi C.G. Mechanical properties of porous-matrix ceramic composites. Adv. Eng. Mater. 2001, 3(1-2):15-23.
11. Yang J., Yu J., Huang Y. Recent developments in gelcasting of ceramics. J. Eur. Ceram. Soc. 2011, 31(14):2569-2591.
12. Ge H., Wang G., Yuan B., et al. Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents. Ceram. Int. 2014, 40(8):11705-11711.
13. Zou C., Zhang C., Li B., et al. Microstructure and properties of porous silicon nitride ceramics prepared by gel-casting and gas pressure sintering. Mater. Des. 2013, 44:114-118.
14. Dong X., Liu J.C., Hou Z.G., et al. Mechanical evaluation of the porous ceramics prepared by filtration with a framework structure of the polycrystalline fibers. Mater. Sci. Forum 2013, 745:565-570.
15. Zhenguang Hou, et al. Fabrication and properties of mullite fiber matrix porous ceramics by a TBA-based gel-casting process. J. Eur. Ceram. Soc. 2013, 33(4):717-725.
16. Li C., Chen Z., Zhu J., et al. Mechanical properties and microstructure of 3D orthogonal quartz fiber reinforced silica composites fabricated by silica sol-infiltration-sintering. Mater. Des. 2012, 36:289-295.
17. Guo X., Li W., Nakanishi K., et al. Preparation of mullite monoliths with well-defined macropores and mesostructured skeletons via the sol-gel process accompanied by phase separation. J. Eur. Ceram. Soc. 2013, 33(10):1967-1974.
18. Mallick K.K. Freeze casting of porous bioactive glass and bioceramics. J. Am. Ceram. Soc. 2009, 92(s1):S85-S94.
19. Deville S., Saiz E., Nalla R.K., et al. Freezing as a path to build complex composites. Science 2006, 311(5760):515-518.
20. Lee E.J., Koh Y.H., Yoon B.H., et al. Highly porous hydroxyapatite bioceramics with interconnected pore channels using camphene-based freeze casting. Mater. Lett. 2007, 61(1):2270-2273.
21. Novich B.E., Sundback C. Quickset injection molding of high-performance ceramics. Ceram. Trans. 1992, 26:157-164.
22. Kasper J.C., Friess W. The freezing step in lyophilization: physico-chemical fundamentals, freezing methods and consequences on process performance and quality attributes of biopharmaceuticals. Eur. J. Pharm. Biopharm. 2011, 78(2):248-263.
23. 2 porous architectures. J. Eur. Ceram. Soc. 2013, 33(10):1599-1607.
24. Waschkies T., Oberacker R., Hoffmann M.J. Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities. Acta Mater. 2015, 59(13):5135-5145. 201.
25. Lichtner A.Z., Jauffrès D., Roussel D., et al. Dispersion, connectivity and tortuosity of hierarchical porosity composite SOFC cathodes prepared by freeze-casting. J. Eur. Ceram. Soc. 2015, 35(2):585-595.
26. Shen S., Zhao Y., Du H., et al. Mullite fiber sealing pad with favorable high-temperature rebound resilience fabricated through colloidal processing. Ceram. Int. 2014, 40(6):8905-8909.
27. Innocentini M.D.M., Sepulveda P., Salvini V.R., et al. Permeability and structure of cellular ceramics: a comparison between two preparation techniques. J. Am. Ceram. Soc. 1998, 81(12):3349-3352.
28. Preiss A., Su B., Collins S., et al. Tailored graded pore structure in zirconia toughened alumina ceramics using double-side cooling freeze casting. J. Eur. Ceram. Soc. 2012, 32(8):1575-1583.
29. Koh Y.H., Song J.H., Lee E.J., et al. Freezing dilute ceramic/camphene slurry for ultra-high porosity ceramics with completely interconnected pore networks. J. Am. Ceram. Soc. 2006, 89(10):3089-3093.
30. Liu G., Button T.W. The effect of particle size in freeze casting of porous alumina-zirconia composite. Ceram. Int. 2013, 39(7):8507-8512.
31. Pringuet A., Pagnoux C., Videcoq A., et al. Granulating fine powders into millimetric spheres with a multiscale porosity: the case of titania. Microporous Mesoporous Mater. 2011, 140(1):17-24.
32. Qian J.M., Wang J.P., Qiao G.J., et al. Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing. J. Eur. Ceram. Soc. 2004, 24(10):3251-3259.
33. Zawada L.P., Staehler J., Steel S. Consequence of intermittent exposure to moisture and salt fog on the high-temperature fatigue durability of several ceramic-matrix composites. J. Am. Ceram. Soc. 2003, 86(8):1282-1291.
34. Liu S., Liu J., Du H., et al. Structure formation process, heat-insulation property and cyclic compression-resilience performance of mullite fibres/whiskers frameworks. RSC Adv. 2014, 4(19):9451-9456.
35. Dong X., Liu J., Hao R., et al. High-temperature elasticity of fibrous ceramics with a bird's nest structure. Ceram. Int. 2013, 33(15):3477-3481.
36. Babich I.Y., Guz A.N., Chekhov V.N. The three-dimensional theory of stability of fibrous and laminated materials. Int. Appl. Mech. 2001, 37(9):1103-1141.
37. Zhang Y., Xiao C.F., An S.L., et al. Characterization of defects of mullite fibers prepared by polyvinyl butyral as spinning aid. Sci. Sintering 2010, 42(2):203-210.