Pitfalls of using entrenched fracture relationships: Fractures in bedded carbonates of the hidden valley fault zone, Canyon Lake Gorge, Comal County, Texas

AAPG Bulletin

Volumn 99, Issue 12, 2015, Pages 2221-2245

  McGinnis, Ronald N ^a   Ferrill, David A ^a   Smart, Kevin J ^a   Morris, Alan P ^a   Higuera Diaz, Camilo ^a,b   Prawica, Daniel ^a,c  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

^b ECOPETROL S A   (Colombia)

^c Daniel Prawica Photography   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; DYNAMIC LOADS; LITHOLOGY; PAVEMENTS; STRATIGRAPHY; STRESSES; STRUCTURAL GEOLOGY;

DIFFERENTIAL STRESS; FRACTURE ATTRIBUTES; FRACTURED RESERVOIR; MECHANICAL STRATIGRAPHY; NATURAL FRACTURE SYSTEM; OPENING MODE FRACTURE; RELATIVE ABUNDANCE; SMALL DISPLACEMENT;

FRACTURE;

CARBONATE; CONCEPTUAL FRAMEWORK; DEFORMATION MECHANISM; FRACTURE NETWORK; LITHOLOGY; NORMAL FAULT; PAVEMENT; PREDICTION; SHEAR STRESS; SPACING; STRATIGRAPHY; STRESS ANALYSIS;

COMAL COUNTY; HIDDEN VALLEY; NEVADA; TEXAS; UNITED STATES;

EID: 84953302418     PISSN: 01491423     EISSN: None     Source Type: Journal    
DOI: 10.1306/07061513012     Document Type: Article

References (75)

1. Aydin, A., and A. Basu, 2005, The Schmidt hammer in rock material characterization: Engineering Geology, v. 81, no. 1, p. 1-14, doi:10.1016/j.enggeo.2005.06.006.
2. Bai, T., and D. D. Pollard, 2000, Fracture spacing in layered rocks: A new explanation based on the stress transition: Journal of Structural Geology, v. 22, no. 1, p. 43-57, doi:10.1016/S0191-8141 (99) 00137-6.
3. Caputo, R., 2005, Stress variability and brittle tectonic structures: Earth-Science Reviews, v. 70, no. 1-2, p. 103-127, doi:10. 1016/j.earscire v. 2004.11.005.
4. Caputo, R., 2010, Why joints are more abundant than faults. A conceptual model to estimate their ratio in layered carbonate rocks: Journal of Structural Geology, v. 32, no. 9, p. 1257-1270, doi:10.1016/j.jsg.2009.05.011.
5. Collins, E. W., 2000, Geologic map of the New Braunfels, Texas, 30 X 60 minute quadrangle: Geologic framework of an urban-growth corridor along the Edwards Aquifer, southcentral Texas: The University of Texas at Austin, Bureau of Economic Geology Miscellaneous Map 39, 28 p., scale 1:100, 000, 1 sheet.
6. Cope, E. D., 1880, On the zoological position of Texas: Washington, DC, U. S. Natural History Museum Bulletin, v. 17, 51 p.
7. Corbett, K., M. Friedman, and J. Spang, 1987, Fracture development and mechanical stratigraphy of Austin Chalk, Texas: AAPG Bulletin, v. 71, p. 17-28.
8. Dershowitz, W. S., and H. H. Einstein, 1988, Characterizing rock joint geometry with joint system models: Rock Mechanics and Rock Engineering, v. 21, no. 1, p. 21-51, doi:10.1007/BF01019674.
9. Dunham, R. J., 1962, Classification of carbonate rocks according to depositional texture, in W. E. Ham, ed., Classification of carbonate rocks: AAPG Memoir 1, p. 108-182.
10. Engelder, T., 1985, Loading paths to joint propagation during a tectonic cycle: An example from the Appalachian Plateau, USA: Journal of Structural Geology, v. 7, no. 3-4, p. 459-476, doi:10.1016/0191-8141 (85) 90049-5.
11. Engelder, T., 1987, Joints and shear fractures in rock, in B. K. Atkinson, ed., Fracture mechanics in rock: Academic Press Geology Series: London, United Kingdom, Academic Press, p. 27-69.
12. Ferrill, D. A., R. N. McGinnis, A. P. Morris, and K. J. Smart, 2012, Hybrid failure: Field evidence and influence on fault refraction: Journal of Structural Geology, v. 42, p. 140-150, doi:10.1016/j.jsg.2012.05.012.
13. Ferrill, D. A., R. N. McGinnis, A. P. Morris, K. J. Smart, Z. Sickmann, M. Bentz, D. Lehrmann, and M. A. Evans, 2014, Control of mechanical stratigraphy on bed-restricted jointing and normal faulting: Eagle Ford Formation, southcentral Texas: AAPG Bulletin, v. 98, no. 11, p. 2477-2506, doi:10.1306/08191414053.
14. Ferrill, D. A., and A. P. Morris, 2001, Displacement gradient and deformation in normal fault systems: Journal of Structural Geology, v. 23, no. 4, p. 619-638, doi:10.1016/S0191-8141 (00) 00139-5.
15. Ferrill, D. A., and A. P. Morris, 2003a, Dilational normal faults: Journal of Structural Geology, v. 25, no. 2, p. 183-196, doi:10.1016/S0191-8141 (02) 00029-9.
16. Ferrill, D. A., and A. P. Morris, 2003b, Erratum to: "Dilational normal faults" [Structural Geology 25 (2003) 183-196]: Journal of Structural Geology, v. 25, no. 5, p. 827. doi:10.1016/S0191-8141 (02) 00196-7.
17. Ferrill, D. A., and A. P. Morris, 2007, Second erratum to "Dilational normal faults" [Journal of Structural Geology 25 (2003) 183-196]: Journal of Structural Geology, v. 29, no. 8, p. 1419-1420, doi:10.1016/j.jsg.2007.04.002.
18. Ferrill, D. A., and A. P. Morris, 2008, Fault zone deformation controlled by carbonate mechanical stratigraphy, Balcones fault system, Texas: AAPG Bulletin, v. 92, no. 3, p. 359-380, doi:10.1306/10290707066.
19. Ferrill, D. A., A. P. Morris, and R. N. McGinnis, 2009, Crossing conjugate normal faults in field exposures and seismic data: AAPG Bulletin, v. 93, no. 11, p. 1471-1488, doi:10.1306/06250909039.
20. Ferrill, D. A., A. P. Morris, R. N. McGinnis, K. J. Smart, and W. C. Ward, 2011, Fault zone deformation and displacement partitioning in mechanically layered carbonates: The Hidden Valley fault, central Texas: AAPG Bulletin, v. 95, no. 8, p. 1383-1397, doi:10.1306/12031010065.
21. Ferrill, D. A., A. P. Morris, D. W. Sims, R. Green, N. Franklin, and D. J. Waiting, 2008, Geologic controls on interaction between the Edwards and Trinity Aquifers, Balcones fault system, Texas: South Texas Geological Society Bulletin, v. 48, no. 8, p. 21-15.
22. Ferrill, D. A., D. W. Sims, D. J. Waiting, A. P. Morris, N. Franklin, and A. L. Schultz, 2004, Structural Framework of the Edwards Aquifer recharge zone in southcentral Texas: Geological Society of America Bulletin, v. 116, no. 3, p. 407-418, doi:10.1130/B25174.1.
23. Ferrill, D. A., J. Winterle, G. Wittmeyer, D. W. Sims, S. Colton, A. Armstrong, and A. P. Morris, 1999, Stressed rock strains groundwater at Yucca Mountain, Nevada: GSA Today, v. 9, no. 5, p. 1-8.
24. Foley, L. L., 1926, Mechanics of the Balcones and Mexia faulting: AAPG Bulletin, v. 10, no. 12, p. 1261-1269.
25. George, W. O., 1952, Geology and ground-water resources of Comal County, Texas: U. S. Geological Survey Water-Supply Paper 1138, 115 p.
26. Giles, M. A., 1992, Hydrogeology and structural geology of the Bulverde area, Bexar and Comal Counties, Texas: M. S. thesis, University of Texas at San Antonio, San Antonio, Texas, 298 p.
27. Gillespie, P., J. J. Walsh, J. Watterson, C. G. Bonson, and T. Manzocchi, 2001, Scaling relationships of joint and vein arrays from The Burren, Co. Clare Ireland: Journal of Structural Geology, v. 23, no. 2-3, p. 183-201, doi:10.1016/S0191-8141 (00) 00090-0.
28. Gross, M. R., 1993, The origin and spacing of cross joints: Examples from the Monterey Formation, Santa Barbara coastline, California: Journal of Structural Geology, v. 15, no. 6, p. 737-751, doi:10.1016/0191-8141 (93) 90059-J.
29. Halbouty, M. T., 1966, Stratigraphic-trap possibilities in upper Jurassic rocks, San Marcos Arch, Texas: AAPG Bulletin, v. 50, no. 1, p. 3-24.
30. Hancock, P. L., 1985, Brittle microtectonics: Principles and practice: Journal of Structural Geology, v. 7, no. 3-4, p. 437-457, doi:10.1016/0191-8141 (85) 90048-3.
31. Harris, J. F., G. L. Taylor, and J. L. Walper, 1960, Relation of deformational features in sedimentary rocks to regional and local structures: AAPG Bulletin, v. 44, p. 1853-1873.
32. Hennings, P. H., J. E. Olson, and L. B. Thompson, 2000, Combining outcrop data and three-dimensional models to characterize fractured reservoirs: An example from Wyoming: AAPG Bulletin, v. 84, no. 6, p. 830-849.
33. Hill, R. T., 1889, A brief description of the Cretaceous rocks of Texas and their economic value, in E. T. Dumble, ed., First annual report of the Geological Survey of Texas: Austin, Texas, Texas Department of Agriculture, Insurance, Statistics, and History, p. 105-141.
34. Hill, R. T., 1890, Classification and origin of the chief geographic features of the Texas region: The American Geologist, v. 6, p. 9-29.
35. Huang, Q., and J. Angelier, 1989, Fracture spacing and its relation to bed thickness: Geological Magazine, v. 126, no. 4, p. 355-362, doi:10.1017/S0016756800006555.
36. Katz, O., Z. Reches, and J.-C. Roegiers, 2000, Evaluation of mechanical rock properties using a Schmidt Hammer: International Journal of Rock Mechanics and Mining Sciences, v. 37, no. 4, p. 723-728, doi:10.1016/SI 365-1609 (00) 00004-6.
37. Ladeira, F. L., and N. J. Price, 1981, Relationship between fracture spacing and bed thickness: Journal of Structural Geology, v. 3, no. 2, p. 179-183, doi:10.1016/0191-8141 (81) 90013-4.
38. Lamb, M. P., and M. A. Fonstad, 2010, Rapid formation of a modern bedrock canyon by a single flood event: Nature Geoscience, v. 3, no. 7, p. 477-481, doi:10.1038/ngeo894.
39. Laubach, S. E., P. Eichhubl, C. Hilgers, and R. H. Lander, 2010, Structural diagenesis: Journal of Structural Geology, v. 32, no. 12, p. 1866-1872, doi:10.1016/j.jsg.2010.10.001.
40. Laubach, S. E., and M. L. Jackson, 1990, Origin of arches in the northwestern Gulf of Mexico basin: Geology, v. 18, no. 7, p. 595-598, doi:10.1130/0091-7613 (1990) 018<0595: OOAITN>2.3. CO;2.
41. Laubach, S. E., J. E. Olson, and M. R. Gross, 2009, Mechanical and fracture stratigraphy: AAPG Bulletin, v. 93, no. 11, p. 1413-1426, doi: 10.1306/07270909094.
42. Lorenz, J. C., J. L. Sterling, D. S. Schechter, C. L. Whigham, and J. L. Jensen, 2002, Natural fractures in the Spraberry Formation, Midland Basin, Texas: The effects of mechanical stratigraphy on fracture variability and reservoir behavior: AAPG Bulletin, v. 86, no. 3, p. 505-524.
43. Mandl, G., 1988, Mechanics of tectonic faulting, models and basic concepts: New York, Elsevier, 407 p.
44. Mauldon, M., W. M. Dunne, and M. B. Rohrbaugh Jr., 2001, Circular scanlines and circular windows: New tools for characterizing the geometry of fracture traces: Journal of Structural Geology, v. 23, no. 2-3, p. 247-258, doi:10.1016/S0191-8141 (00) 00094-8.
45. McFarland, J. N., A. P. Morris, and D. A. Ferrill, 2012, Stress inversion using slip tendency: Computers and Geosciences, v. 41, p. 40-46, doi:10.1016/j.cageo.2011.08.004.
46. McGinnis, R. N., A. P. Morris, D. A. Ferrill, and C. L. Dinwiddie, 2009, Deformation analysis of tuffaceous sediments in the Volcanic Tableland near Bishop, California: Lithosphere, v. 1, no. 5, p. 291-304, doi:10.1130/L43.1.
47. McQuillan, H., 1973, Small-scale fracture density in Asmari Formation of southwest Iran and its relation to bed thickness and structural setting: AAPG Bulletin, v. 57, p. 2367-2385.
48. Morris, A. P., D. A. Ferrill, and D. B. Henderson, 1996, Slip tendency analysis and fault reactivation: Geology, v. 24, no. 3, p. 275-278, doi:10.1130/0091-7613 (1996) 024<0275: STAAFR>2.3. CO;2.
49. Morris, A. P., D. A. Ferrill, and R. N. McGinnis, 2009a, Fault frequency and strain: Lithosphere, v. 1, no. 2, p. 105-109, doi:10.1130/L23.1.
50. Morris, A. P., D. A. Ferrill, and R. N. McGinnis, 2009b, Mechanical stratigraphy and faulting in Cretaceous carbonates: AAPG Bulletin, v. 93, no. 11, p. 1459-1470, doi:10.1306/04080909011.
51. Morris, A. P., D. A. Ferrill, D. W. Sims, N. Franklin, and D. J. Waiting, 2004, Patterns of fault displacement and strain at Yucca Mountain, Nevada: Journal of Structural Geology, v. 26, no. 9, p. 1707-1725, doi: 10.1016/j.jsg.2003.12.005.
52. Morris, A. P., R. N. McGinnis, and D. A. Ferrill, 2014, Fault displacement gradients on normal faults and associated deformation: AAPG Bulletin, v. 98, no. 6, p. 1161-1184, doi:10.1306/10311312204.
53. Murray, G. E., 1961, Geology of the Atlantic and Gulf Coastal province of North America: New York, Harper and Brothers, 692 p.
54. Narr, W., 1991, Fracture density in the deep subsurface: Techniques with application to Point Arguello Oil Field: AAPG Bulletin, v. 75, p. 1300-1323.
55. Narr, W., D. W. Schechter, and L. B. Thompson, 2006, Naturally fractured reservoir characterization: Richardson, Texas, SPE, 112 p.
56. Narr, W., and J. Suppe, 1991, Joint spacing in sedimentary rocks: Journal of Structural Geology, v. 13, no. 9, p. 1037-1048, doi:10.1016/0191-8141 (91) 90055-N.
57. Nelson, R. A., 2001, Geologic analysis of naturally fractured reservoirs, 2nd edition: Boston, Massachusetts, Gulf Professional Publishing, 332 p.
58. Ogilvie, S. R., E. Isakov, and P. W. J. Glover, 2006, Fluid flow through rough fractures in rocks. II: A new matching model for rough rock fractures: Earth and Planetary Science Letters, v. 241, no. 3-4, p. 454-465, doi:10.1016/j.epsl.2005.11.041.
59. Olson, J. E., S. E. Laubach, and R. H. Lander, 2009, Natural fracture characterization in tight gas sandstones: Integrating mechanics and diagenesis: AAPG Bulletin, v. 93, no. 11, p. 1535-1549, doi: 10.1306/08110909100.
60. Ortega, O. O., J. F. W. Gale, and R. Marrett, 2010, Quantifying the diagenetic and stratigraphic controls on fracture intensity in platform carbonates: An example from the Sierra Madre Oriental, northeast Mexico: Journal of Structural Geology, v. 32, no. 12, p. 1943-1959, doi:10.1016/j.jsg.2010.07.004.
61. Price, N. J., 1966, Fault and joint development in brittle and semi-brittle rock: London, United Kingdom, Pergamon Press, 176 p.
62. Rose, P. R., 1972, Edwards Group, surface and subsurface, central Texas: Bureau of Economic Geology, University of Texas at Austin Report of Investigations 74, 198 p.
63. Sandidge, J. R., 1959, A review of Edwards Limestone production with special reference to south-central Texas, in F. E. Lozo, H. F. Nelson, K. Young, O. B. Shelburne, and J. R. Sandidge, eds., Symposium on Edwards Limestone in central Texas: The University of Texas Publication 5905, p. 131-151.
64. Sibson, R., 1998, Brittle failure mode plots for compressional and extensional tectonic regimes: Journal of Structural Geology, v. 20, no. 5, p. 655-660, doi:10.1016/S0191-8141 (98) 00116-3.
65. Smart, K. J., G. I. Ofoegbu, A. P. Morris, R. N. McGinnis, and D. A. Ferrill, 2014, Geomechanical modeling of hydraulic fracturing: Why mechanical stratigraphy, stress state, and pre-existing structure matter: AAPG Bulletin, v. 98, no. 11, p. 2237-2261, doi:10.1306/07071413118.
66. Stearns, D. W., and M. Friedman, 1972, Reservoirs in fractured rock, in R. E. King, ed., Stratigraphic oil and gas fields: AAPG Memoir 16, p. 82-106.
67. Ward, W. C, and W. B. Ward, 2007, Stratigraphy of the middle part of Glen Rose Formation (Lower Albian), Canyon Lake Gorge, central Texas, USA, in R. W. Scott, ed., Cretaceous rudists and carbonate platforms: Environmental feedback: SEPM Special Publication 87, p. 193-210.
68. Webb, W. E., and A. M. Hull, 1962, Engineering geology of Canyon Dam, Guadalupe river, Comal County, Texas: Field excursion no. 12, November 11, 1962, Houston Geological Society, p. 385-392.
69. Weeks, A. W., 1945, Balcones, Luling, and Mexia fault zones in Texas: AAPG Bulletin, v. 29, p. 1733-1737.
70. Wennberg, O. P., M. Azizzadeh, A. A. M. Aqrawi, E. Blanc, P. Brockbank, K. B. Lyslo, N. Pickard, L. D. Salem, and T. Svånå, 2007, The Khaviz Anticline: An outcrop analogue to giant fractured Asmari Formation reservoirs in SW Iran, in L. Lonergan, R. J. H. Jolly, K. Rawnsley, and D. J. Sanderson, eds., Fractured reservoirs: Geological Society, London, Special Publications, v. 270, p. 23-2.
71. Wennberg, O. P., T. Svånå, M. Azizzadeh, A. M. M. Aqrawi, P. Brockbank, K. B. Lyslo, and S. Ogilvie, 2006, Fracture intensity vs. mechanical stratigraphy in platform top carbonates: The Aquitanian of the Asmari Formation, Khaviz Anticline, Zagros, SW Iran: Petroleum Geoscience, v. 12, no. 3, p. 235-246, doi:10.1144/1354-079305-675.
72. Wu, H., and D. D. Pollard, 1995, An experimental study of the relationship between joint spacing and layer thickness: Journal of Structural Geology, v. 17, no. 6, p. 887-905, doi:10.1016/0191-8141 (94) 00099-L.
73. Yin, H. M., 2010, Fracture saturation and critical thickness in layered material: International Journal of Solids and Structures, v. 47, no. 7-8, p. 1007-1015, doi:10.1016/j.ijsolstr.2009.12.016.
74. Young, K., 1972, Mesozoic history, Llano region, in V. E. Barnes, W. C. Bell, S. E. Clabaugh, P. E. Cloud, Jr., R. V. McGehee, P. U. Rodda, and K. Young, eds., Geology of the Llano region and Austin area, field excursion: Bureau of Economic Geology Guidebook 13: Austin, Texas, University of Texas, 154 p.
75. Zahm, C, L. Zahm, and J. A. Bellian, 2010, Integrated fracture prediction using sequence stratigraphy within a carbonate fault damage zone, Texas, USA: Journal of Structural Geology, v. 32, no. 9, p. 1363-1374, doi:10.1016/j.jsg.2009.05.012.