4.07 - Modeling of Fatigue Crack Growth: Dislocation Models

Comprehensive Structural Integrity: Nine Volume Set

Volumn 1-9, Issue , 2003, Pages 191-207

  Pippan, R ^a   Riemelmoser, F O ^b  

^a Erich Schmid Institute of Materials Science   (Austria)

^b HILTI CORPORATION   (Liechtenstein)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84953248619     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/04035-0     Document Type: Chapter

References (54)

1. B.A. Bilby, A.H. Cottrell and K.H. Swinden (1963) The spread of plastic yield from a notch. Proc. Roy. Soc. London. A272 304.
2. B. Budiansky and W. Hutchinson (1978) Analysis of closure in fatigue crack growth. J. Appl. Mech. 45 267.
3. B. Budiansky and J.R. Rice (1973) Conservation law and energy release rates. J. Appl. Mech. 40 201.
4. M. J. Caton, J. W. Jones, J. M. Boileau and J. E. Allison, 1999, The effect of soldification rate on the growth of small fatigue cracks in a cast 319-type aluminum alloy. Metall. Mater. Trans. A, 3055–3068.
5. D. L. Davidson, 1999, Private communication.
6. D.L. Davidson and J. Lankford (1992) Fatigue crack growth in metals and alloys, mechanisms and micromechanisms. Int. Mater. Rev. 37 45.
7. V.S. Deshpande, A. Needleman and E. Van der Giessen (2001) A discrete dislocation analysis of near-threshold fatigue crack growth. Acta Mater. 49 3189-3203.
8. B. Devincre and S.G. Roberts (1996) Three-dimensional simulation of dislocation-crack interactions in b.c.c. metals at the mesoscopic scale. Acta Mater. 44 2891-2900.
9. V. Doquet (1998) First stage in the development of micromechanical simulations of the crystallographic propagation of fatigue cracks under multiaxial loading. Fatigue Fract. Eng. Mater. Struct. 21 661-672.
10. W. Elber (1970) Fatigue crack closure under cyclic tension. Eng. Fract. Mech. 2 37-45.
11. J.O. Eshelby (1956) The continuum theory of lattice defects. Solid State Phys. 3 70.
12. N.A. Fleck and J.C. Newman (1988) Analysis of crack closure under plane strain conditions. J.C. Newman, Jr.,W. Elber (Eds) Mechanics of Fatigue Crack Closure, ASTM STP 982 ASTM 319-341.
13. H. Führing and W. Seeger (1979) Dugdale crack closure analysis of fatigue cracks under constant amplitude loading. Eng. Fract. Mech. 11 99.
14. A. Hartmaier and P. Gumbsch (1997) On the activation energy for the brittle/ductile transition. Phys. Status Solidi B-Basic Res. 202 R1-R2.
15. A. Hartmaier and P. Gumbsch (1999) Mesoscopic simulation of dislocation activity at crack tips. Mater. Res. Soc. Proc. 539 233-244.
16. R.W. Hertzberg (1993) A simple calculation of da/dN–ΔK data in the near threshold regime and above. Int. J. Fract. 64 R53-R58.
17. R.W. Hertzberg (1995) On the calculation of closure-free fatigue crack propagation data in monolithic metal alloys. Mater. Sci. Eng. A190 25-32.
18. H. Inoue, Y. Akahosi and S. Harada (1995) Molecular dynamics simulation on fracture mechanisms of nano-scale polycrystal under static and cyclic loading. Mater. Sci. Res. Int. 1 95-99.
19. L.P. Kubin (1993) Dislocation pattering during multiple slip of fcc crystals. Phys. Status Solidi A 135 433-443.
20. J.C.M. Li (1986) Computer simulation of dislocations emitted from a crack. Scr. Metall. 20 1477-1482.
21. P.K. Liaw, T.R. Leax and W.A. Logsdon (1983) Near-threshold fatigue crack growth behavior in metals. Acta Metall. 31 1581-1587.
22. N. Louat, K. Sadananda, M. Duesbery and A.K. Vasudevan (1993) A theoretical evaluation of crack closure. Metall. Trans. 24A 2225-2232.
23. C. Mabru, D. Bertheau, S. Pautrot, J. Petit and G. Henaff (1999) Influence of temperature and environment on fatigue crack propagation in a TiAl-based alloy. Eng. Fract. Mech. 64 23-47.
24. R.C. McClung (1991) The influence of applied stress, crack length, and stress intensity factor on crack closure. Metal Trans. 22A 1559.
25. R.C. McClung and D.L. Davidson (1991) High resolution numerical and experimental studies of fatigue cracks. Eng. Fract. Mech. 39 113-130.
26. R.C. McClung and H. Sehitoglu (1989) On the finite element analysis of fatigue crack closure. Eng. Fract. Mech. 33 237-272.
27. A.J. McEvily, 1994, Private communication.
28. F.R.N. Nabarro (1967) N.F. Mott, E.C. Bullard, D.H. Wilkinson (Eds) Theory of Crystal Dislocations London: Oxford University Press
29. P. Neumann (1969) Coarse slip model of fatigue. Acta Metall. 17 1219-1225.
30. J.C. Newman Jr. and H. Armen (1975) Elastic–plastic analysis of a propagating crack under cyclic loading. AIAA J. 13 1017-1023.
31. S.M. Ohr (1985) An electron microscope study of crack tip deformation and its import on the dislocation theory of fracture. Mater. Sci. Eng. 72 1-35.
32. R.M.N. Pelloux (1970) Crack extension by alternating shear. Eng. Fract. Mech. 1 697-704.
33. R. Pippan (1991) Dislocation emission and fatigue crack growth threshold. Acta Metall. Mater. 39 255-262.
34. R. Pippan (1992) The condition for the cyclic plastic deformation at the crack tip, the influence of dislocation obstacles. Int. J. Fract. 58 305-318.
35. R. Pippan (1998) The effective threshold of fatigue crack propagation in aluminum alloys: Part I. the influence of yield stress and chemical composition. Phil. Mag. 77 861-873.
36. R. Pippan and F.O. Riemelmoser (1998) Visualization of the plasticity-induced crack closure under plane strain conditions. Eng. Fract. Mech. 60 315-322.
37. K.S. Ravichandran and E.S. Dwarakadasa (1991) Theoretical modelling of the effects of grain size on the threshold for fatigue crack growth. Acta Metall. Mater. 39 1343-1357.
38. J.R. Rice and R. Thomson (1974) Ductile versus brittle behavior of crystals. Phil. Mag. 29 73-97.
39. F.O. Riemelmoser, P. Gumbsch and R. Pippan (2001) Dislocation modelling of fatigue cracks: an overview. Mater. Trans., JIM 42 2-13.
40. F.O. Riemelmoser and R. Pippan (1998) Mechanical reasons for plasticity-induced crack closure under plane strain conditions. Fatigue Fract. Eng. Mater. Struct. 21 1425-1433.
41. F.O. Riemelmoser and R. Pippan (1999) Monotonic and cyclic crack tip plasticity modeled as growth of shear bands. A.S. Khan (Eds) Proceedings, International Symposium on Plasticity and its Current Applications Fulton, Maryland: NEAT Press 791-793.
42. F.O. Riemelmoser and R. Pippan (2000) The mechanics of moderately stressed cracks. J.C. Newman, R.S. Piascik (Eds) Proceedings of Fatigue Crack Growth Thresholds, Endurance Limits and Design, ASTM STP 1372 ASTM 252-265.
43. F.O. Riemelmoser, R. Pippan and H.P. Stüwe (1997) A comparison of a discrete dislocation model and a continuous description of cyclic crack tip plasticity. Int. J. Fract. 85 157-168.
44. F.O. Riemelmoser, R. Pippan and H.P. Stüwe (1998) An argument for a cycle by cycle propagation of fatigue cracks at small stress intensity ranges. Acta Mater. 46 1793-1799.
45. R.O. Ritchie (1988) Mechanisms of fatigue crack propagation in metals, ceramics and composites: the role of crack tip shielding. Mater. Sci. Eng. 103 15-28.
46. R.O. Ritchie and S. Suresh (1981) Some consideration to fatigue crack closure at near-threshold stress intensities due to fracture surface morphology. Metall. Trans. 13A 937-940.
47. K. Sadananda and A.K. Vasudevan (1999) Author's response on discussion of “Reconsideration of error in the analysis of the wake dislocation problem”. Metall. Mater. Trans. 30A 1457.
48. S. Suresh (1991) Fatigue of Materials Cambridge/New York/Port Chester: Cambridge University Press
49. H. Tada, P.C. Paris and G.R. Irwin (1985) The Stress Analysis of Cracks Handbook St. Louis, MO: Del Research Corporation
50. K. Tanaka and T. Mura (1984) Fatigue crack growth along planar slip bands. Acta Metall. 32 1731-1740.
51. A.J. Wilkinson and S.G. Roberts (1999) Dislocation modelling of stage I fatigue crack growth. X.R. Wu, Z.G. Wang (Eds) Proceedings of the 6th International Fatigue Congress, Fatigue99 Warley, UK: EMAS 678.
52. A.J. Wilkinson, S.G. Roberts and P.B. Hirsch (1998) Modelling the threshold conditions for propagation of stage I fatigue cracks. Acta Metall. Mater. 46 379-390.
53. Li Xu-Dong and Edwards (1996) Theoretical modelling of fatigue threshold for aluminium alloys. Eng. Fract. Mech. 54 35-48.
54. T. Yokobori, A.T. Yokobori Jr. and A. Kamei (1974) Computer simulation of dislocation mission from a stressed source. Phil. Mag. 30 367-378.