Challenges and opportunities in integration of design and control

Computers and Chemical Engineering

Volumn 81, Issue , 2015, Pages 138-146

  Huusom, Jakob Kjøbsted ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Process control; Process design; Process integration; Process synthesis

Indexed keywords

ALGORITHMS; DESIGN; INDUSTRIAL MANAGEMENT; INDUSTRIAL RESEARCH; INTEGRATED CONTROL; PROCESS DESIGN;

DESIGN AND CONTROL; INDUSTRIAL PRACTICES; INTEGRATED APPROACH; MULTI-OBJECTIVE SYNTHESIS; OPERATION AND CONTROL; PROCESS INTEGRATION; PROCESS SYNTHESIS; PROCESSING SYSTEMS;

PROCESS CONTROL;

EID: 84949926106     PISSN: 00981354     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compchemeng.2015.03.019     Document Type: Article

References (93)

1. Alhammadi, H.Y., Romagnoli, J.A., Process design and operation. Incorporating environmental, profitability, heat integration and controllability considerations. Seferlis, P., Georgiadis, C.M., (eds.) The integration of process design and control. Computer aided chemical engineering, vol. 17, 2004, 264–305.
2. Alsted, V., Skogestad, S., Null space method for selecting optimal measurement combinations as controlled variables. Ind Eng Chem Res 46 (2007), 846–853.
3. Amrit, R., Rawlings, J.B., Biegler, L.T., Optimizing process economics online using model predictive control. Comput Chem Eng 58 (2013), 334–343.
4. Anderson, B.D.O., Moore, J.B., Optimal control. Linear quadratic methods. 1989, Prentice Hall International Edition.
5. Angeli, D., Amrit, R., Rawlings, J.B., On average performance and stability of economic model predictive control?. IEEE Trans Autom Control 57:7 (2012), 1615–1626.
6. Asprion, N., Kaibel, G., Dividing wall columns: fundamentals and recent advances. Chem Eng Process: Process Intensif 49 (2010), 139–146.
7. Åström, K.J., Limitations on control systems performance. Eur J Control 6 (2000), 2–20.
8. Badwe, A.S., Gudi, R.D., Patwardhan, R.S., Shah, S.L., Patwardhan, S.C., Detection of model-plant mismatch in MPC applications. J Process Control 19 (2009), 1305–1313.
9. Bek-Pedersen, E., Gani, R., Design and synthesis of distillation systems using a driving-force-based approach. Chem Eng Process 43 (2004), 251–262.
10. Bemporad, A., Morari, M., Control of systems integrating logic, dynamics, and constraints. Automatica 35 (1999), 407–427.
11. Bemporad, A., Morari, M., Dua, V., Pistikopoulos, E.N., The explicit linear quadratic regulator for constraint systems. Automatica 38 (2002), 3–20.
12. Bequette, B.W., Process control. 2003, Prentice Hall PRT.
13. Biegler, L.T., Grossmann, I.E., Westerberg, A.W., Systematic methods of chemical process design. 1997, Prentice Hall PRT.
14. Biegler, L.T., Zavala, V.M., Large-scale nonlinear programming using IPOPT: an integrating framework for enterprise-wide dynamic optimization. Comput Chem Eng 33 (2009), 575–582.
15. Bildea, C.S., Dimian, A.C., Iedema, P.D., Nonlinear behavior of reactor-separator-recycle systems. Comput Chem Eng 24 (2000), 209–215.
16. Bristol, E.H., On a new measure of interactions for multivariable process control. IEEE Trans Autom Control AC-11 (1966), 133–134.
17. Cameron, I., Gani, R., Product and process modelling. A case study approach. 2011, Elsevier.
18. Chawankul, N., Budman, H., Douglas, P.L., The integration of design and control: IMC control and robustness?. Comput Chem Eng 29:2 (2005), 261–271.
19. Chawankul, N., Sandoval, L.R., Budman, H., Douglas, P.L., Integration of design and control: a robust control approach using MPC?. Can J Chem Eng 85:4 (2007), 433–446.
20. Chrisofides, P.D., Scattolini, R., de la Peña, D.M., Liu, J., Distributed model predictive control: a tutorial review and future research directions. Comput Chem Eng 51 (2013), 21–41.
21. Clarke, D., Mohtadi, C., Tuffs, P.S., Generalized predictive control – part I? The basic algorithm. Automatica 23:2 (1987), 137–148.
22. Cohen, G.H., Coon, G.A., Theoretical considerations of retarded control. Trans ASME 75 (1953), 827–834.
23. Cutler, C.R., Ramaker, B.L., Dynamic matrix control – a computer control algorithm. Proceedings of the joint automatic control conference, vol. 1, 1980, Wp5-B.
24. Diehl, M., Amrit, R., Rawlings, J.B., A Lyapunov function for economic optimizing model predictive control?. IEEE Trans Autom Control 56:3 (2011), 703–707.
25. Diehl, M., Bock, H.G., Schlöder, J.P., Findeisen, R., Nagy, Z., Allgöwer, F., Real-time optimization and nonlinear model predictive control of processes governed by differential-algebraic equations. J Process Control 12 (2002), 577–585.
26. Douglas, J.M., Conceptual design of processes. 1988, McGraw-Hill.
27. Downs, J.J., Vogel, E.F., A plant-wide industrial process control problem?. Comput Chem Eng 17:3 (1993), 245–255.
28. Ellis, M., Durand, H., Christofides, P.D., A tutorial review of economic model predictive control methods. J Process Control 24 (2014), 1156–1178.
29. Friedman, Z., Ingalls, J., Siirola, J.D., Watson, J.P., Block-oriented modeling of superstructure optimization problems. Comput Chem Eng 57 (2013), 10–23.
30. Gani, R., Bek-Pedersen, E., Simple new algorithm for distillation column design. AIChE J 46:6 (2000), 1271–1274.
31. Garcia, C.E., Morari, M., Internal model control 1. A unifying review and some new results. Ind Eng Chem Process Des Dev 21:2 (1982), 308–323.
32. Garriga, J.L., Soroush, M., Model predictive control tuning methods: a review?. Ind Eng Chem Res 49:8 (2010), 3505–3515.
33. Georgiadis, M.C., Schenk, M., Pistikopoulos, E.N., Gani, R., The interactions of design, control and operability in reactive distillation systems. Comput Chem Eng 26 (2002), 735–746.
34. Gerhard, J., Marquardt, W., Mönnigmann, M., Normal vectors on critical manifolds for robust design of transient processes in the presence of fast disturbances?. SIAM J Appl Dyn Syst 7:2 (2008), 461–490.
35. Glasser, D., Hildebrand, D., Crowe, C., A geometric approach to steady state flow reactors: the attainable region and optimization in concentration space?. Ind Eng Chem Res 26:9 (1987), 1803–1810.
36. Glasser, D., Hildebrand, D., Crowe, C., Geometry of the attainable region generated by reaction and mixing: with and without constraints?. Ind Eng Chem Res 29:1 (1990), 49–58.
37. Godorr, S.A., Hildebrand, D., Glasser, D., The attainable region for systems with mixing and multiple-rate processes: finding optimal reactor structures?. Chem Eng J Biochem Eng J 54:3 (1994), 175–186.
38. Grancharova, A., Johansen, T.A., Explicit nonlinear model predictive control. Theory and applications. Lecture notes in control and information science, vol. 429, 2012, Springer.
39. Grossmann, I., Mixed-integer optimization techniques for algorithmic process synthesis. Adv Chem Eng 23 (1996), 171–246.
40. Halvorsen, I.J., Skogestand, S., Morud, J.C., Alstad, V., Optimal selection of control variables. Ind Eng Chem Res 42 (2003), 3273–3284.
41. Hamid, M.K.A., Model-based integrated process design and controller design of chemical processes. (PhD thesis), 2011, Department of Chemical and Biochemical Engineering, Technical University of Denmark.
42. Hamid, M.K.A., Sin, G., Gani, R., Integration of process design and controller design for chemical processes using model-based methodology. Comput Chem Eng 34 (2010), 683–699.
43. Harmsen, G.J., Reactive distillation: the front runner of industrial process intensification. A full review of commercial applications, research, scale up, design and operation. Chem Eng Process: Process Intensif 46 (2007), 774–780.
44. Harrison, C.A., Qin, S.J., Discriminating between disturbance and process model mismatch in model predictive control. J Process Control 19 (2009), 1610–1616.
45. Hedengren, J.D., Edgar, T.F., Approximate nonlinear model predictive control with in situ adaptive tabulation. Comput Chem Eng 32 (2008), 706–714.
46. Huusom, J.K., Poulsen, N.K., Jørgensen, S.B., Jørgensen, J.B., Tuning SISO offset-free model predictive control base don ARX models. J Process Control 22 (2012), 1997–2007.
47. Kano, M., Ogawa, M., The state of the art in chemical process control in Japan: good practice and questionnaire survey?. J Process Control 20:9 (2010), 969–982.
48. Keviczky, T., Borrelli, F., Balas, G.J., Stability analysis of decentralized RHC for decoupled systems. Proceedings of the 44th IEEE conference on decision and control, and the European control conference, Seville, Spain, 2005, 1689–1694.
49. Khan, F.I., Abbasi, S.A., Risk assessment in chemical process industries. 1998, Discovery Publishing House.
50. Kiss, A.A., Bildea, C.S., A control perspective on process intensification in dividing-wall columns. Chem Eng Process: Process Intensif 50 (2011), 281–292.
51. Kiss, A.A., Distillation technology – still young and full of breakthrough opportunities. J Chem Technol Biotechnol 89 (2013), 479–489.
52. Kwakernaak, H., Sivan, R., Linear optimal control systems. 1972, John Wiley and Sons Inc.
53. Larsen, T., Skogestad, S., Plantwide control – a review and a new design procedure?. Model Identif Control 21:4 (2000), 209–240.
54. Lopez-Nagrete, R., D'Amato, F.J., Bielger, L.T., Kumar, A., Fast nonlinear model predictive control: formulation and industrial process applications. Comput Chem Eng 51 (2013), 55–64.
55. Luyben, M.L., Floudas, C.A., Analyzing the interaction of design and control – 1. A multiobjective framework and application to binary distillation synthesis. Comput Chem Eng 18:10 (1994), 933–969.
56. Luyben, M.L., Floudas, C.A., Analyzing the interaction of design and control – 2. Reactor-separator-recycle system. Comput Chem Eng 18:10 (1994), 971–994.
57. Mangi, L., Raimondo, D.M., Allgöwer, F., (eds.) Nonlinear model predictive control. Lecture notes in control and information science, vol. 384, 2009, Springer.
58. Mansuori, S., Sales Cruz, M., Huusom, J.K., Gani, R., Integrated process design and control of reactive distillation processes. Submitted for the International Symposium on Advanced Control of Chemical Processes – ADCHEM 2015, 2014.
59. Mayne, D.Q., Rawlings, J.B., Rao, C.V., Sockaert, P.O.M., Constrained model predictive control. Stability and optimality. Automatica 36 (2000), 789–814.
60. Mohideen, M.J., Perkins, J.D., Pistikopoulos, E.N., Optimal design of dynamic systems under uncertainty. AIChE J 42:8 (1996), 2251–2272.
61. Mohideen, M.J., Perkins, J.D., Pistikopoulos, E.N., Robust stability considerations in optimal design of dynamic systems under uncertainty?. J Process Control 7:5 (1997), 371–385.
62. Morari, M., Design of resilient processing plants – III. A general framework for the assessment of dynamic resilience. Chem Eng Sci 38:11 (1983), 1881–1891.
63. Morari, M., Lee, J., Model predictive control: past, present and future. Comput Chem Eng 23 (1990), 667–682.
64. Mönnigmann, M., Marquardt, W., Steady-state process optimization with guaranteed robust stability and flexibility: application to HDA reaction section?. Ind Eng Chem Res 44:8 (2005), 2737–2753.
65. Muske, K.R., Rawlings, J.B., Model predictive control with linear models. AIChE J 39:2 (1993), 262–287.
66. Newell, R.B., Lee, P.L., Applied process control – a case study. 1989, Prentice Hall.
67. Nikacevic, N.M., Huesman, A.E.M., Van den Hof, P.M.J., Stankiewicz, A.I., Opportunities and challenges for process control in process intensification. Chem Eng Process 52 (2012), 1–15.
68. Nishida, N., Stephanopoulos, G., Westerberg, A.W., A review of process synthesis. AIChE J 27 (1981), 321–351.
69. Olujić, Ž, Jödecke, M., Shilkin, A., Schuch, G., Kaibel, B., Equipment improvement trends in distillation. Chem Eng Process: Process Intensif 48 (2009), 1089–1104.
70. Perez Cisneros, E.S., Gani, R., Michelsen, M.L., Reactive separation systems – I. Computation of physical and chemical equilibrium. Chem Eng Sci 52 (1997), 527–543.
71. Peters, M.S., Timmerhaus, K.D., West, R.E., Plant design and economics for chemical engineers. 5th ed., 2003, McGraw Hill.
72. Pistikopoulos, E.N., Galindo, A., Dua, V., (eds.) Multi-parametric model based control: theory and applications, vol. 2, 2007, Wiley.
73. Qin, S.J., Badgwell, T.A., A survey of industrial model predictive control technology?. Control Eng Pract 11:7 (2003), 733–764.
74. Ravanchi, M.T., Kaghazchi, T., Kargari, A., Application of membrane separation processes in petrochemical industry: a review. Desalination 235 (2009), 199–244.
75. Rawlings, J.B., Bonné, D., Jørgensen, J.B., Venkat, A.N., Jørgensen, S.B., Unreachable setpoints in model predictive control?. IEEE Trans Autom Control 53:9 (2008), 2209–2215.
76. Rawlings, J.B., Stewart, B.T., Coordinating multiple optimization-based controllers: new opportunities and challenges. J Process Control 18 (2008), 839–845.
77. Ricardez-Sandoval, L.A., Budman, H.M., Douglas, P.L., Integration of design and control for chemical processes: a review of the literature and some recent results. Annu Rev Control 33 (2009), 158–171.
78. Scattolini, R., Architectures for distributed and hierarchical model predictive control – a review. J Process Control 19 (2009), 723–731.
79. Seborg, D.E., Edgar, T.F., Mellichamp, D.A., Doyle, F.J., Process dynamics and control. 3rd ed., 2010, John Wiley and Sons.
80. Sharifzadeh, M., Integration of process design and control: a review. Chem Eng Res Des 91 (2013), 2515–2549.
81. Siirola, J.J., Industrial applications of chemical process synthesis. Adv Chem Eng 23 (1996), 1–62.
82. Skogestad, S., Plantwide control: the search for the self-optimizing control structure. J Process Control 10 (2000), 487–507.
83. Skogestad, S., Postlethwaite, I., Multivariable feedback control. 1996, Wiley.
84. Turton, R., Bailie, R.C., Whiting, W.B., Shaeiwitz, J.A., Analysis, synthesis and design of chemical processes. 3rd ed., 2008, Prentice Hall PRT.
85. Towler, G.P., Sinnott, R.K., Chemical engineering design: principles, practice, and economics of plant and process design. 2nd ed., 2013, Elsevier.
86. Venkat, A.N., Distributed model predictive control: theory and applications. (PhD thesis), 2006, University of Wisconsin-Madison.
87. Waschl, H., Jørgensen, J.B., Huusom, J.K., del Re, L., A tuning approach for offset-free MPC with conditional reference adaptation. Proceedings of the 19th IFAC World Congress, Cape Town, South Africa, 2014, 3062–3067.
88. Westermann, T., Merlin, T., Flow-through catalytic membrane reactors – principles and applications. Chem Eng Process: Process Intensif 48 (2009), 17–28.
89. Wood, K.R., Berry, M.W., Terminal composition control of a binary distillation column. Chem Eng Sci 28 (1973), 1707–1717.
90. Yildirim, Ö., Kiss, A.A., Kenig, E.Y., Dividing wall columns in chemical process industry: a review on current activities. Sep Purif Technol 80 (2011), 403–417.
91. Yuan, Z., Chen, B., Sin, G., Gani, R., State-of-the-art and progress in the optimization based simultaneous design and control for chemical processes?. AIChE J 58:6 (2012), 1640–1659.
92. Zavala, V.M., Laird, C.D., Biegler, L.T., Fast implementations and rigorous models: can both be accommodated in NMPC?. J Robust Nonlinear Control 18 (2008), 800–815.
93. Ziegler, J.G., Nichols, N.B., Optimum settings for automatic controllers?. Trans ASME 64:8 (1942), 759–765.