Time-varying and multiresolution envelope analysis and discriminative feature analysis for bearing fault diagnosis

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 12, 2015, Pages 7749-7761

  Kang, Myeongsu ^a   Kim, Jaeyoung ^a   Wills, Linda M ^b   Kim, Jong Myon ^a  

^a University of Ulsan   (South Korea)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Acoustic emission; fault diagnosis; genetic algorithm; single and multiple combined bearing defects; time varying and multi resolution envelope analysis

Indexed keywords

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; BEARINGS (MACHINE PARTS); COMMUNICATION CHANNELS (INFORMATION THEORY); DEFECTS; FAILURE ANALYSIS; FILTER BANKS; FREQUENCY DOMAIN ANALYSIS; GAUSSIAN DISTRIBUTION; GENETIC ALGORITHMS; IMPULSE RESPONSE; ROLLER BEARINGS; SIGNAL ANALYSIS; TIME DOMAIN ANALYSIS;

ACOUSTIC EMISSION SIGNAL; BEARING DEFECT; BEARING FAULT DIAGNOSIS; DISCRIMINATIVE FEATURES; ENVELOPE ANALYSIS; FAULT DIAGNOSIS SCHEMES; ROLLING ELEMENT BEARING; TIME AND FREQUENCY DOMAINS;

FAULT DETECTION;

EID: 84948389808     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2015.2460242     Document Type: Article

References (35)

1. J. Chen, J. Chen, and C. Gong, "On optimizing the aerodynamic load acting on the turbine shaft of PMSG-based direct-drive wind energy conversion system," IEEE Trans. Ind. Electron., vol. 61, no. 8, pp. 4402-4031, Aug. 2014.
2. X. She, A. Q. Huang, F.Wang, and R. Burgos, "Wind energy system with integrated functions of active power transfer, reactive power compensation, and voltage conversion," IEEE Trans. Ind. Electron., vol. 60, no. 10, pp. 4512-4524, Oct. 2013.
3. H. Sanchez, T. Escobet, V. Puig, and P. F. Odgaard, "Fault diagnosis of an advanced wind turbine benchmark using interval-based ARRs and observers," IEEE Trans. Ind. Electron., vol. 62, no. 6, pp. 3783-3793, Jun. 2015.
4. P. Zhang, Y. Du, T. G. Habetler, and B. Liu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
5. Y. Amirat, M. E. H. Benbouzid, E. Al-Ahmar, B. Bensaker, and S. Turri, "A brief status on condition monitoring and fault diagnosis in wind energy conversion systems," Renew. Sustain. Energy Rev., vol. 13, no. 9, pp. 2629-2636, Dec. 2009.
6. S. Yin, G. Wang, and H. R. Karimi, "Data-driven design of robust fault detection system for wind turbines," Mechatronics, vol. 24, no. 4, pp. 298-306, Jun. 2014.
7. N. M. A. Freire, J. O. Estima, and A. J. M. Cardoso, "Open-circuit fault diagnosis in PMSG drives for wind turbine applications," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 3957-3967, Sep. 2013.
8. J. O. Estima and A. J. M. Cardoso, "A new algorithm for real-time multiple open-circuit fault diagnosis in voltage-fed PWM motor drives by the reference current errors," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3496-3505, Aug. 2013.
9. H. Chen and S. Lu, "Fault diagnosis digital method for power transistors in power converters of switched reluctance motors," IEEE Trans. Ind. Electron., vol. 60, no. 2, pp. 749-763, Feb. 2012.
10. A. Soualhi, H. Razik, G. Clerc, and D. D. Doan, "Prognosis of bearing failures using hidden Markov models and the adaptive neuro-fuzzy inference system," IEEE Trans. Ind. Electron., vol. 61, no. 6, pp. 2864-2874, Jun. 2014.
11. X. Jin, M. Zhao, T. W. S. Chow, and M. Pecht, "Motor bearing fault diagnosis using trace ratio linear discriminant analysis," IEEE Trans. Ind. Electron., vol. 61, no. 5, pp. 2441-2451, May 2014.
12. J. Seshadrinath, B. Singh, and B. K. Panigrahi, "Investigation of vibration signatures for multiple fault diagnosis in variable frequency drives using complex wavelets," IEEE Trans. Power Electron., vol. 29, no. 2, pp. 936-945, Feb. 2014.
13. M. D. Prieto, G. Cirrincione, A. G. Espinosa, J. A. Ortega, and H. Henao, "Bearing fault diagnosis by a novel condition-monitoring scheme based on statistical-time features and neural networks," IEEE Trans. Ind. Electron., vol. 30, no. 8, pp. 3398-3407, Aug. 2013.
14. F. Immovilli, C. Bianchini, M. Cocconcelli, A. Bellini, and R. Rubini, "Bearing fault model for induction motor with extremely induced vibration," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3408-3418, Aug. 2013.
15. I. Bediaga, X. Mendizabal, A. Arnaiz, and J. Munoa, "Ball bearing damage detection using traditional signal processing algorithms," IEEE Instrum. Meas. Mag., vol. 16, no. 2, pp. 20-25, Apr. 2013.
16. E. C. C. Lau and H. W. Ngan, "Detection of motor bearing outer raceway defect by wavelet packet transformed motor current signature analysis," IEEE Trans. Instrum.Meas., vol. 59, no. 10, pp. 2683-2690, Oct. 2010.
17. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearing faults in induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 244-251, Jan. 2010.
18. M. Kang, J. Kim, and J.-M Kim, "High-performance and energy-efficient fault diagnosis using effective envelope analysis and denoising on a general-purpose graphics processing unit," IEEE Trans. Power Electron., vol. 30, no. 5, pp. 2763-2776, May 2015.
19. D. H. Pandya, S. H. Upadhyay, and S. P. Harsha, "Fault diagnosis of rolling element bearing with intrinsic mode function of acoustic emission data using APF-KNN," Expert Syst. Appl., vol. 40, no. 10, pp. 4137-4145, Aug. 2013.
20. S. A. Niknam, V. Songmene, and Y. H. Au, "The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines," Int. J. Adv. Manuf. Technol., vol. 69, no. 9-12, pp. 2679-2689, Dec. 2013.
21. W. Caesarendra, P. B. Kosasih, A. K. Tieu, C. A. S. Moodie, and B.-K Choi, "Condition monitoring of naturally damaged slow speed slewing bearing based on ensemble empirical mode decomposition," J. Mech. Sci. Technol., vol. 27, no. 8, pp. 2253-2262, Aug. 2013.
22. B. Eftekharnejad, M. R. Carrasco, B. Charnley, and D. Mba, "The application of spectral kurtosis on acoustic emission and vibrations from a defective bearing," Mech. Syst. Signal Process., vol. 25, no. 1, pp. 266-284, Jan. 2011.
23. A. Widodo, et al., "Fault diagnosis of low speed bearing based on relevance vector machine and support vector machine," Expert Syst. Appl., vol. 36, no. 3, pp. 7252-7261, Apr. 2009.
24. A. Widodo, B.-S. Yang, E. Y. Kim, A. C. C. Tan, and J. Mathew, "Fault diagnosis of low speed bearing based on acoustic emission signal and multi-class relevance vector machine," Nondestruct. Test. Eval., vol. 24, no. 4, pp. 313-328, 2009.
25. N. Tandon and A. Chaudhary, "A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings," Tribol. Int., vol. 32, no. 8, pp. 469-480, Aug. 1999.
26. G. Dong, J. Chen, and F. Zhao, "A frequency-shifted bispectrum for rolling element bearing diagnosis," J. Sound Vib., vol. 339, pp. 396-418, Mar. 2015.
27. S. Khanam, N. Tandon, and J. K. Dutt, "A system dynamic approach to bearing fault identification with the application of Kalman and H∞ filters," J. Vib. Control, p. 25, to be published, DOI: http://dx.doi.org/10. 1177/1077546314557851
28. D. Wang, P. W. Tse, and K. L. Tsui, "An enhanced kurtogram method for fault diagnosis of rolling element bearings," Mech. Syst. Signal Process., vol. 35, no. 1/2, pp. 176-199, Feb. 2013.
29. P.W. Tse and D. Wang, "The design of a new sparsogram for fast bearing fault diagnosis: Part 1 of the two related manuscripts that have a joint title as two automatic vibration-based fault diagnostic methods using the novel sparsity measurement-parts 1 and 2," Mech. Syst. Signal Process., vol. 40, pp. 499-519, 2013.
30. P.W. Tse and D. Wang, "The design of a new sparsogram for fast bearing fault diagnosis: Part 2 of the two related manuscripts that have a joint title as two automatic vibration-based fault diagnostic methods using the novel sparsity measurement-parts 1 and 2," Mech. Syst. Signal Process., vol. 40, pp. 520-544, 2013.
31. R. S. Figliola and D. E. Beasley, "Sampling, digital devices, and data acquisition," in Theory and Design for Mechanical Measurements, 5th ed. Hoboken, NJ, USA: Wiley, 2011, pp. 260-303.
32. R. Jiang, S. Liu, Y. Tang, and Y. Liu, "A novel method of fault diagnosis for rolling element bearings based on the accumulated envelope spectrum of the wavelet packet," J. Vib. Control, vol. 21, no. 8, pp. 1580-1593, Jun. 2015
33. R. B. Randall and J. Antoni, "Rolling element bearing diagnostics-A tutorial," Mech. Syst. Signal Process., vol. 25, no. 2, pp. 485-520, Feb. 2011.
34. D. Whitley, "A genetic algorithm tutorial," Statist. Comput., vol. 4, no. 2, pp. 65-85, Jun. 1994.
35. J. D. Rodriguez, A. Perez, and J. A. Lozano, "Sensitivity analysis of k-fold cross validation in prediction error estimation," IEEE Trans. Pattern Anal. Mach. Intell., vol. 32, no. 3, pp. 569-575, Mar. 2010.