Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids

Composites Part A: Applied Science and Manufacturing

Volumn 81, Issue , 2016, Pages 158-171

  Graupner, Nina ^a   Ziegmann, Gerhard ^b   Wilde, Fabian ^c   Beckmann, Felix ^c   Müssig, Jörg ^a  

^a HOCHSCHULE BREMEN   (Germany)

^b CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

^c INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

A. Polymer matrix composites (PMCs); D. Mechanical testing; E. Compression moulding; E. Injection moulding

Indexed keywords

ASPECT RATIO; COMPACTION; COMPRESSION MOLDING; FIBERS; IMPACT STRENGTH; INJECTION MOLDING; MECHANICAL PROPERTIES; MECHANICAL TESTING; MOLDING; POLYMER MATRIX COMPOSITES; POLYPROPYLENES;

CELLULOSE FIBRES; E. COMPRESSION MOULDINGS; E.INJECTION MOULDING; FIBRE ORIENTATION; INJECTION MOULDED; MECHANICAL CHARACTERISTICS; POLYMER MATRIX COMPOSITES (PMCS); PROCESSING PROCEDURES;

TENSILE STRENGTH;

EID: 84947976579     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2015.10.040     Document Type: Article

References (34)

1. M.R. Piggott Why interface testing by single-fibre methods can be misleading Compos Sci Technol 57 8 1997 965 974
2. H. Zhang, M.L. Ericson, J. Varna, and L.A. Berglund Transverse single-fibre test for interfacial debonding in composites. 1. Experimental observations Compos Part A: Appl Sci Manuf 28 4 1997 309 315
3. N. Sato, T. Kurauchi, S. Sato, and O. Kamigaito Reinforcing mechanism by small diameter fiber in short fiber composite J Compos Mater 22 9 1988 850 873
4. J.L. Thomason, M.A. Vlug, G. Schipper, and H. Krikor Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene. 3. Strength and strain at failure Compos Part A: Appl Sci Manuf 27 11 1996 1075 1084
5. J. Thomason The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene. 6. The properties of injection moulded long fibre PP at high fibre content Compos Part A: Appl Sci Manuf 36 2005 995 1003
6. N.-J. Lee, and J. Jang The effect of fibre content on the mechanical properties of glass fibre mat/polypropylene composites Compos Part A: Appl Sci Manuf 30 6 1999 815 822
7. N.A. Isitman, M. Aykol, and C. Kaynak Interactions at fiber/matrix interface in short fiber reinforced amorphous thermoplastic composites modified with micro- and nano-fillers J Mater Sci 47 2 2012 702 710
8. J.L. Thomason The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. Interface strength and fibre strain in injection moulded long fibre PP at high fibre content Compos Part A: Appl Sci Manuf 38 1 2007 210 216
9. C.K. Moon, J.-O. Lee, H.H. Cho, and K.S. Kim Effect of diameter and surface treatment of fiber on interfacial shear strength in glass fiber/epoxy and HDPE J Appl Polym Sci 45 3 1992 443 450
10. S. Fara, and A. Pavan Fibre orientation effects on the fracture of short fibre polymer composites: on the existence of a critical fibre orientation on varying internal material variables J Mater Sci 39 11 2004 3619 3628
11. S.-Y. Fu, and B. Lauke Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers Compos Sci Technol 56 10 1996 1179 1190
12. M. Miwa, and N. Horiba Effects of fibre length on tensile strength of carbon/glass fibre hybrid composites J Mater Sci 29 4 1994 973 977
13. M. Wollerdorfer, and H. Bader Influence of natural fibres on the mechanical properties of biodegradable polymers Ind Crops Prod 8 1998 105 112
14. P.-O. Hagstrand, F. Bonjour, and J.-A. Manson The influence of void content on the structural flexural performance of unidirectional glass fibre reinforced polypropylene composites Compos Part A: Appl Sci Manuf 36 5 2005 705 714
15. Beckmann F. Verfahren zum Herstellen von Thermoplast gebundenem Naturfasermaterial in schütt- und rieselfähiger Form, patent, patent number EP1307333B1 [in German]; 2001.
16. R.A. Malloy The design process and material selection R.A. Malloy, Plastic part design for injection moulding - an introduction, Chapter 3 1994 Carl Hanser Verlag München, Germany 978-3-446-15956-3 127 183
17. L.J. Broutman, and S.M. Krishnakumar Impact strength of polymers: 1. The effect of thermal treatment and residual stress Polym Eng Sci 16 2 1976 74 81
18. N. Graupner, F. Beckmann, F. Wilde, and J. Müssig Using synchroton-radiation based micro-computertomography (SR μ-CT) for the measurement of fibre orientations in cellulose fibre reinforced polylactide (PLA) composites J Mater Sci 49 1 2014 450 460
19. F. Carrillo, X. Colom, and X. Cañavate Properties of regenerated cellulose lyocell fiber-reinforced composites J Reinf Plast Compos 29 3 2010 359 371
20. D.M. Wilson Statistical tensile strength of Nextel™ 610 and Nextel™ 720 fibres J Mater Sci 32 10 1997 2535 2542
21. N. Graupner Analyse und Optimierung der Struktur- und Eigenschaftsbeziehungen von cellulosefaserverstärkten Polylactid-Verbundwerkstoffen 1st ed. 2014 Papierflieger Verlag Clausthal-Zellerfeld, Germany 978-3-86948-328-3 [in German]
22. N. Graupner, J. Rößler, G. Ziegmann, and J. Müssig Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: a critical review of pull-out test, microbond test and single fibre fragmentation test results Compos Part A: Appl Sci Manuf 63 2014 133 148
23. N. Graupner, H. Fischer, G. Ziegmann, and J. Müssig Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eukalyptus globulus lignin Compos Part B 66 2014 117 125
24. M.A. Sawpan, K.L. Pickering, and A. Fernyhough Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites Compos Part A: Appl Sci Manuf 42 3 2011 310 319
25. A. Le Duigou, P. Davies, and C. Baley Seawater ageing of flax/poly(lactic acid) biocomposites Polym Degrad Stab 94 7 2009 1151 1162
26. J.L. Thomason The influence of fibre properties of the performance of glass-fibre-reinforced polyamide 6,6 Compos Sci Technol 59 16 1999 2315 2328
27. M. Akay, and D. Barkley Fibre orientation and mechanical behaviour in reinforced thermoplastic injection mouldings J Mater Sci 26 10 1991 2731 2742
28. S. Toll, and P.-O. Andersson Microstructure of long- and short-fiber reinforced injection molded polyamide Polym Compos 14 2 1993 116 125
29. A. Kelly, and W.R. Tyson Fiber strengthened materials V.F. Zackay, High-strength materials 1964 John Wiley & Sons Berkeley, USA
30. J.L. Thomason The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6 Compos Part A: Appl Sci Manuf 40 2 2009 114 124
31. J. Erdmann, and J. Ganster Einfluss des Faserdurchmessers auf die Struktur und Mechanik Cellulosefaser-verstärkter PLA-Komposite Lenzinger Berichte 89 2011 91 102 [in German]
32. G. Beckermann, and K. Pickering Engineering and evaluation of hemp fibre reinforced polypropylene composites: micro-mechanics and strength prediction modelling Compos Part A: Appl Sci Manuf 40 2 2009 210 217
33. A. Kelly, and W.R. Tyson Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum J Mech Phys Solids 13 6 1965 329 338
34. H. Fukuda, and T.-W. Chou A probabilistic theory of the strength of short-fibre composites with variable fibre length and orientation J Mater Sci (Hist Arch) 17 4 1982 1003 1011