Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test results

Composites Part A: Applied Science and Manufacturing

Volumn 63, Issue , 2014, Pages 133-148

  Graupner, Nina ^a   Rößler, Joraine ^a   Ziegmann, Gerhard ^b   Müssig, Jörg ^a  

^a HOCHSCHULE BREMEN   (Germany)

^b CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

A. Fibres; A. Thermoplastic resin; B. Fibre matrix bond; B. Fragmentation

Indexed keywords

ADHESION; BAST FIBERS; CELLULOSE; MATRIX ALGEBRA; POLYPROPYLENES; TEXTILE FIBERS;

B. FRAGMENTATION; CHEMICAL COMPOSITIONS; FIBRE/MATRIX BOND; FRAGMENTATION TESTS; INTERFACIAL SHEAR STRENGTH; MALEIC ANHYDRIDE GRAFTED POLYPROPYLENE; REGENERATED CELLULOSE; SINGLE FIBRE FRAGMENTATION TESTS;

TESTING;

ADHESION; PHLOEM; POLYPROPYLENE; SYNTHETIC POLYMERS; TEXTILE FIBERS; THERMOPLASTICS;

EID: 84901003044     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2014.04.011     Document Type: Article

References (65)

1. V. Rao, P.H. Franco, A.D. Ozzello, and L.T. Drzal A direct comparison of the fragmentation test and the microbond pull-out test for determining the interfacial IFSS J Adhes 34 1991 65 77
2. P. Herrera-Franco, and L. Drzal Comparison of methods for the measurement of fibre/matrix adhesion in composites Composites 23 1992 1 27
3. R.-B. Adusumali, M. Reifferscheid, H. Weber, T. Roeder, H. Sixta, and W. Gindl Mechanical properties of regenerated cellulose fibres for composites Macromol Symp 244 2006 119 125
4. M. Narkis, and E. Chen Review of methods for characterisation of interfacial fibre-matrix interactions Polym Compos 9 1988 245 251
5. S. Luo, and A. Netravali Interfacial and mechanical properties of environment-friendly "green" composites made from pineapple fibres and poly(hydroxybutyrate-co-valerate) resin J Mater Sci 34 1999 3709 3719
6. J.L. Thomason, and M.A. Vlug Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene. 4. Impact properties Compos Part A Appl Sci Manuf 28 1997 277 288
7. Dutschk, V. Oberflächenkräfte und ihr Beitrag zu Adhäsion und Haftung in glasfaserverstärkten Thermoplasten. PhD thesis. Fakultät für Maschinenwesen der Technischen Universität Dresden; 2000 [in German].
8. S. Zhandarov, and E. Mäder Characterisation of fibre/matrix interface strength: applicability of different tests, approaches and parameters Compos Sci Technol 65 2005 149 160
9. X. Ji, Y. Dai, B.L. Zheng, L. Ye, and Y.-W. Mai Interface end theory and re-evaluation in interfacial strength test methods Compos Interfaces 10 2003 567 580
10. R.-B. Adusumalli, M. Reifferscheid, H.K. Weber, T. Roeder, H. Sixta, and W. Gindl IFSS of the lyocell fibre/polymer matrix interface evaluated with the microbond technique J Compos Mater 46 2010 359 367
11. T. Clyne, and F. Jones A. Mortensen, Encyclopaedia of materials: science and technology. Chapter 3.7.17: composites: interfaces 2001 Elsevier Oxford, UK 3 13
12. S. Feih, K. Wonsyld, D. Minzari, P. Westermann, and H. Lilholt Testing procedure for the single fibre fragmentation test 2004 Risø National Laboratory Roskilde, Denmark
13. F. Ramirez, L. Carlsson, and B. Acha A method to measure fracture toughness of the fibre/matrix interface using the single-fibre fragmentation test Compos Part A Appl Sci Manuf 40 2009 679 686
14. U. Guar, and B. Miller Microbond method for determination of the IFSS of a fibre/resin interface: evaluation of experimental parameters Compos Sci Technol 34 1989 35 51
15. W. Beckert, and B. Lauke Critical discussion of the single-fibre pull-out test: does it measure adhesion? Compos Sci Technol 57 1997 1689 1706
16. C. Wang Fracture mechanics of single-fibre pull-out test J Mater Sci 32 1997 483 490
17. M.J.A. van den Oever, and H.L. Bos Critical fibre length and apparent interfacial IFSS of single flax fibre polypropylene compsites Adv Compos Mater Lett 7 1998 81 85
18. H.L. Bos, K. Molenveld, W. Teunissen, A.M. van Wingerde, and D.R.V. van Delft Compressive behaviour of unidirectional flax fibre reinforced composites J Mater Sci 39 2004 2159 2168
19. J.-M. Park, S.T. Quang, B.-S. Hwang, and K.L. DeVries Interfacial evaluation of modified jute and hemp fibres/polypropylene (PP)-maleic anhydride polypropylene copolymers (PP-MAPP) composites using micromechanical technique and nondestructive acoustic emission Compos Sci Technol 66 2006 2686 2699
20. T. Huber, and J. Müssig Fibre matrix adhesion of natural fibres cotton, flax and hemp in polymeric matrices analyzed with the single fibre fragmentation test Compos Interfaces 15 2008 335 349
21. A. Stamboulis, C. Baillie, and E. Schulz Interfacial characterisation of flax fibre-thermoplastic polymer composites by the pull-out test Angewandte Makromolekulare Chemie 272 1999 117 120
22. S. Wong, R. Shanks, and A. Hodzic Effect of additives on the interfacial strength of poly(L-lactic acid) and poly(3-hydroxy butyric acid)-flax fibre composites Compos Sci Technol 67 2007 2478 2484
23. X.W. Yuan, K. Jayaraman, D. Bhattacharyya, S. Fakirov, and D. Bhattacharyya Mechanical performance of plasma-treated natural fibre-polypropylene composites. Handbook of engineering biopolymers - homopolymers, blends and composites 2007 Carl Hanser Verlag Munich, Germany 329 412
24. Taha IMA. Processing and characterisation of selected discontinous natural fibres and their polymer composites. Institut für Polymerwerkstoffe und Kunststofftechnik, TU Clausthal, Fakultät für Materialwissenschaften, Clausthal-Zellerfeld, Germany; 2007.
25. S. Prasad, C. Pavithran, and P. Rohatgi Alkali treatment of coir fibres for coir-polyester composites J Mater Sci 18 1983 1443 1454
26. G.H. Schmid, M. Dvorak, J. Müller, and J. Müssig Characterizing flock fibers using quantitative image analysis Flock - English issue 30 2004 6 12
27. A. Kelly, and W.R. Tyson Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum J Mech Phys Solids 13 1965 329 338
28. J. Felix, and P. Gatenholm The nature of adhesion in composites of modified cellulose fibres and polypropylene J Appl Polym Sci 42 1991 609 620
29. P. Joseph, M. Rabello, L. Mattoso, K. Jospeh, and T. Sabu Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites Compos Sci Technol 62 2002 1357 1372
30. A. Mechraoui, B. Riedl, and D. Rodrigue The effect of fibre and coupling agent content on the mechanical properties of hemp/polypropylene composites Compos Interfaces 14 2007 837 848
31. A. Arbelaiz, B. Fernandez, G. Cantero, R. Llano-Ponte, A. Valea, and I. Mondragon Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization Compos Part A Appl Sci Manuf 36 2005 1637 1644
32. G. Beckermann, K. Pickering, and N. Foreman Evaluation of the mechanical properties of injection moulded hemp fibre reinforced polypropylene composites Adv Mater Res 29-30 2007 303 306
33. El-Sabbagh A, Steuernagel L, Ziegmann G. Mechanical properties modelling of natural fibre thermoplastic composites. In: Aachen D, editor. M-Base engineering & software GmbH, N-fibrebase workshop, Bremen, Germany, 21.-22.9.2009; 2009.
34. F.A. Mirza, S.M. Rasel, M.S. Kim, A.M. Afsar, B.S. Kim, and J.I. Song Lyocell fibre reinforced polypropylene composites: effect of matrix modification Adv Mater Res 123-125 2010 1159 1162
35. H.-J. Endres, and A. Siebert-Raths Engineering biopolymers: markets, manufacturing, properties and applications 2011 Carl Hanser Verlag Munich, Germany
36. N. Reddy, D. Nama, and Y. Yang Polylactic acid/polypropylene polyblend fibres for better resistance to degradation Polym Degrad Stabil 93 2008 233 241
37. V. Khoshkava, and M.R. Kamal Effect of surface energy on dispersion and mechanical properties of polymer/nanocrystalline cellulose nanocomposites Biomacromolecules 14 2013 3155 3163
38. B. Morlin, and T. Czigány Investigation of the surface adhesion of natural fibre reinforced polymer composites with acoustic emission technique Proceeding of the 8th polymers for advanced technologies international symposium 2005 Budapest Hungary 13-16
39. L. Yang, and J. Thomason Development and application of micromechanical techniques for characterising interfacial shear strength in fibre-thermoplastic composites Polym Test 31 2012 895 903
40. A. Le Duigou, A. Bourmaud, E. Balnois, P. Davies, and C. Baley Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle Ind Crops Prod 39 2012 31 39
41. J. Müssig, H. Fischer, N. Graupner, and A. Drieling Testing methods for measuring physical and mechanical fibre properties. Chapter 13 J. Müssig, Industrial applications of natural fibres: structure, properties and technical applications 2010 John Wiley & Sons, Ltd. pp. 269-311
42. N. Graupner Application of lignin as natural adhesion promoter in cotton fibre-reinforced poly(lactic acid) (PLA) composites J Mater Sci 43 2008 5222 5229
43. Graupner N, Fischer H, Ziegmann G, Müssig J. Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eukalyptus globulus lignin. Compos Part B Eng. - submitted for publication, 20143.
44. A. Valadez-González, J.M. Cervantes-Uc, R. Olayo, and P.J. Herrera-Franco Effect of fibre surface treatment on the fibre-matrix bond strength of natural fibre reinforced composites Compos Part B Eng 30 1999 309 320
45. P. Herrera-Franco, and A. Valadez-González A study of the mechanical properties of short natural-fibre reinforced composites Compos Part B Eng 36 2005 597 608
46. M.R. Piggott, and S.R. Dai Fibre pull-out experiments with thermoplastics Polym Eng Sci 31 1991 1246 1249
47. H.D. Wagner, H.E. Gallis, and E. Wiesel Study of the interface in kevlar 49-epoxy composites by means of microbond and fragmentation tests: effects of materials and testing variables J Mater Sci 28 1993 2238 2244
48. L. Yang, and J.L. Thomason Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods Compos Part A Appl Sci Manuf 41 2010 1077 1083
49. A. Le Duigou, P. Davies, and C. Baley Improving the interfacial bonding of flax fibre/poly(L-lactide) bio-composites Compos Sci Technol 70 2010 231 239
50. M.R. Piggott Why interface testing by single-fibre methods can be misleading Compos Sci Technol 51 1997 965 974
51. J.O. Karlsson, J.-F. Blachot, A. Peguy, and P. Gatenholm Improvement of adhesion between polyethylene and regenerated cellulose fibres by surface fibrillation Polym Compos 17 1996 300 304
52. A. Awal, G. Cescutti, S. Ghosh, and J. Müssig Interfacial studies of natural fibre/polypropylene composites using single fibre fragmentation test (SFFT) Compos Part A Appl Sci Manuf 42 2011 50 56
53. Bos H-L. The potential of flax fibres as reinforcement for composite materials. Doctoral thesis. Department of Chemical Engineering, Technische Universiteit Eindhoven; 2004.
54. C. Burgstaller Comparison of interfacial IFSS from fibre pull-out and mechanical testing in polypropylene sisal composites Int J Mater Prod Technol 36 2009 11 19
55. I.M. Taha, and G. Ziegmann Potential of sisal reinforced biodegradable polylactic acid and polyvinyl alcohol composites Key Eng Mater 425 2010 167 178
56. D. Cho, J.M. Seo, H.S. Lee, C.W. Cho, S.O. Han, and W.H. Park Property improvement of natural fibre-reinforced green composites by water treatment Adv Compos Mater 16 2007 299 314
57. F. Torres, and M. Cubillas Study of the interfacial properties of natural fibre reinforced polyethylene Polym Test 24 2005 694 698
58. M. Islam, K. Pickering, and N. Foreman Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites Compos Part A Appl Sci Manuf 41 2010 596 603
59. Islam MS. The influence of fibre processing and treatments on hemp fibre/epoxy and hemp fibre/PLA composites. University of Waikato, Faculty of Materials and Process Engineering, Hamilton, New Zealand; 2008.
60. Sawpan MA. Mechanical performance of industrial hemp fibre reinforced polylactide and unsaturated polyester composites. The University of Waikato, Faculty of Materials and Process Engineering, Hamilton, New Zealand; 2010.
61. Ji S, Cho D, Park W, Lee B. Electron beam effect on the tensile properties and topology of jute fibres and the interfacial strength of jute-PLA green composites. Macromolecular Research, The Polymer Society of Korea, co-published with Springer 2010; 18: 919-922.
62. H. Anuar, A. Zuraida, B. Morlin, and J.G. Kovács Micromechanical property investigations of poly(lactic acid)-kenaf fibre biocomposites J Nat Fibres 8 2011 14 26
63. S.G. Lee, S.-S. Choi, W.H. Park, and D. Cho Characterisation of surface modified flax fibres and their biocomposites with PHB Macromol Symp 197 2003 88 89
64. S. Kobayashi, T. Yamamoto, and A. Nakai Interfacial shear strength evaluation of jute/poly(lactic acid) J Solid Mech Mater Eng 3 2009 1063 1070
65. K.L. Pickering, M.A. Sawpan, J. Jayaraman, and A. Fernyhough Influence of loading rate, alkali fibre treatment and crystallinity on fracture toughness of random short hemp fibre reinforced polylactide bio-composites Compos Part A Appl Sci Manuf 42 2011 1148 1156