Hierarchical Structure Formation of Nanoparticulate Spray-Dried Composite Aggregates

ACS Nano

Volumn 9, Issue 11, 2015, Pages 10749-10757

  Zellmer, Sabrina ^a   Garnweitner, Georg ^a   Breinlinger, Thomas ^b   Kraft, Torsten ^b   Schilde, Carsten ^a  

^a TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

^b FRAUNHOFER INSTITUTE FOR MECHANICS OF MATERIALS IWM   (Germany)

Author keywords

aggregate structure; iron oxide; multicomponent; nanoparticles; silica; spray drying; zirconia

Indexed keywords

AGGREGATES; ARCHITECTURAL DESIGN; DRYING; IRON OXIDES; NANOPARTICLES; NANOSTRUCTURES; PRODUCT DESIGN; SILICA; SPRAY DRYING; ZIRCONIA;

AGGREGATE STRUCTURES; APPLICATION PROPERTIES; DISCRETE ELEMENT METHOD SIMULATIONS; HIERARCHICAL STRUCTURES; HIGH-QUALITY PRODUCTS; MULTICOMPONENTS; SEGREGATION PHENOMENA; THEORETICAL MODELING;

STRUCTURAL DESIGN;

EID: 84947965193     PISSN: 19360851     EISSN: 1936086X     Source Type: Journal    
DOI: 10.1021/acsnano.5b05220     Document Type: Article

References (50)

1. Xiao, J.; Chen, X. D. Multiscale Modeling for Surface Composition of Spray-Dried Two-Component Powders AIChE J. 2014, 60, 2416-2427 10.1002/aic.14452
2. Wang, S.; Langrish, T. A Review of Process Simulations and the Use of Additives in Spray Drying Food Res. Int. 2009, 42, 13-25 10.1016/j.foodres.2008.09.006
3. Schilde, C.; Mages-Sauter, C.; Kwade, A.; Schuchmann, H. P. Efficiency of Different Dispersing Devices for Dispersing Nanosized Silica and Alumina Powder Technol. 2011, 207, 353-361 10.1016/j.powtec.2010.11.019
4. Mondragon, R.; Julia, J. E.; Barba, A.; Jarque, J. C. Determination of the Packing Fraction of Silica Nanoparticles from Rheological and Viscoelastic Measurements of Nanofluids Chem. Eng. Sci. 2012, 80, 119-127 10.1016/j.ces.2012.06.009
5. Schilde, C.; Kampen, I.; Kwade, A. Dispersion Kinetics of Nano-Sized Particles for Different Dispersing Machines Chem. Eng. Sci. 2010, 65, 3518-3527 10.1016/j.ces.2010.02.043
6. Barth, N.; Schilde, C.; Kwade, A. Influence of Particle Size Distribution on Micromechanical Properties of thin Nanoparticulate Coatings Phys. Procedia 2013, 40, 9-18 10.1016/j.phpro.2012.12.002
7. Schönstedt, B.; Garnweitner, G.; Barth, N.; Mühlmeister, A.; Kwade, A. Influence of Pyrogenic Particles on the Micromechanical Bahvior of Thin Sol-Gel Layers Langmuir 2011, 27, 8396-8403 10.1021/la200756r
8. Nadler, M.; Mahrholz, T.; Riedel, U.; Schilde, C.; Kwade, A. Preparation of Colloidal Carbon Nanotube Dispersions and their Characterisation Using a Disc Centrifuge Carbon 2008, 46, 1384-1392 10.1016/j.carbon.2008.05.024
9. Schilde, C.; Nolte, H.; Arlt, C.; Kwade, A. Effect of Fluid-Particle-Interactions on Dispersing Nano-Particles in Epoxy Resins Using Stirred-Media-Mills and Three-Roll-Mills Compos. Sci. Technol. 2010, 70, 657-663 10.1016/j.compscitech.2009.12.021
10. Seydel, P.; Sengespeick, A.; Blömer, J.; Bertling, J. Experiment and Mathematical Modeling of Solid Formation at Spray Drying Chem. Eng. Technol. 2004, 27, 505-510 10.1002/ceat.200403218
11. Vehring, R. Pharmaceutical Particle Engineering via Spray Drying Pharm. Res. 2008, 25, 999-1022 10.1007/s11095-007-9475-1
12. Mondragon, R.; Julia, J. E.; Barba, A.; Jarque, J. C. Influence of the Particle Size on the Microstructure and Mechanical Properties of Grains Containing Mixtures of Nanoparticles and Microparticles: Levitator Tests and Pilot-Scaled Validation J. Eur. Ceram. Soc. 2013, 33, 1271-1280 10.1016/j.jeurceramsoc.2012.12.017
13. Arutanti, O.; Nandiyanto, A. B. D.; Ogi, T.; Kim, T. O.; Okuyama, K. Influences of Porous Structurization and Pt Addition on the Improvement of Photocatalytic Performance of WO3 Particles ACS Appl. Mater. Interfaces 2015, 7, 3009-3017 10.1021/am507935j
14. Julklang, W.; Golman, B. Numerical Simulation of Spray Drying of Hydroxyapatite Nanoparticles Clean Technol. Environ. Policy 2015, 17, 1217 10.1007/s10098-015-0931-z
15. Stocke, N. A.; Meenach, S. A.; Arnold, S. M.; Mansour, H. M.; Hilt, J. Z. Formulation and Characterization of Inhalable Magnetic Nanocomposite Microparticles (MnMs) for Targeted Pulmonary Delivery via Spray Drying Int. J. Pharm. 2015, 479, 320-328 10.1016/j.ijpharm.2014.12.050
16. Draheim, C.; de Crécy, F.; Hansen, S.; Collnot, E. M.; Lehr, C. M. A Design of Experiment Study of Nanoprecipitation and Nano Spray Drying as Processes to Prepare PLGA Nano- and Microparticles with Defined Sizes and Size Distributions Pharm. Res. 2015, 10.1007/s11095-015-1647-9
17. Mezhericher, M.; Levy, A.; Borde, I. Modelling the Morphological Evolution of Nanosuspension Droplet in Constant-Rate Drying Stage Chem. Eng. Sci. 2011, 66, 884-896 10.1016/j.ces.2010.11.028
18. Mezhericher, M.; Naumann, M.; Peglow, M.; Levy, A.; Tsotstas, E.; Borde, I. Continuous species Transport and Population Balance Models for First Drying Stage of nNnosuspension Droplets Chem. Eng. J. 2012, 210, 120-135 10.1016/j.cej.2012.08.038
19. Mondragon, R.; Julia, J. E.; Barba, A.; Jarque, J. C. Microstructure and Mechanical Properties of Grains of Silica Nanofluids Dried in an Acoustic Levitator J. Eur. Ceram. Soc. 2012, 32, 4295-4304 10.1016/j.jeurceramsoc.2012.07.017
20. Walzel, P. Influence of the Spray Method on Product Quality and Morphology in Spray Drying Chem. Eng. Technol. 2011, 34, 1039-1048 10.1002/ceat.201100051
21. Walton, D. E.; Mumford, C. J. The Morphology of Spray-Dried Particles: The Effect of Process Variables Upon the Morphology of Spray-Dried Particles Chem. Eng. Res. Des. 1999, 77, 442-460 10.1205/026387699526296
22. Nijdam, J. J.; Langrish, T.; Keey, R. B. A High-Temperature Drying Model for Softwood Timber Chem. Eng. Sci. 2000, 55, 3585-3598 10.1016/S0009-2509(00)00042-7
23. Meerdink, G.; Riet, K. Modelling Segregation of Solute Material During Drying of Liquid Foods AIChE J. 1995, 41, 732-736 10.1002/aic.690410331
24. Adhikari, B.; Howes, T.; Troung, V. Surface Stickiness of Drops of Carbohydrates and Organic Acid Solutions During Convective Drying: Experiments and Modelling Drying Technol. 2003, 21, 839-873 10.1081/DRT-120021689
25. Payne, M. R.; Morison, K. R. A Multi-Component Approach to Salt and Water Diffusion in Cheese Int. Dairy J. 1999, 9, 887-894 10.1016/S0958-6946(99)00157-0
26. Miller, R. S.; Harstad, K.; Bellan, J. Evaluation of Equilibrium and Non-Equilibrium Evaporation Models for Many-Droplet Gas-Liquid Flow Simulations Int. J. Multiphase Flow 1998, 24, 1025-1055 10.1016/S0301-9322(98)00028-7
27. Chen, X. D. Heat-Mass Transfer and Structure Formation During Drying of Single Food Droplets Drying Technol. 2004, 22, 179-190 10.1081/DRT-120028226
28. Adhikari, B.; Howes, T.; Bhandari, B. R.; Truong, V. Effect of Addition of Maltodextrin on Drying Kinetics and Stickiness of Sugar and Acid-Rich Foods During Convective Drying: Experiments and Modelling J. Food Eng. 2004, 62, 53-68 10.1016/S0260-8774(03)00171-7
29. Mondragon, R.; Juliá, J. E.; Hernández, L.; Jarque, J. C. Modelling of Drying Curves of Silica Nanofluid Droplets Dried in an Acoustic Levitator Using the Reaction Engineering Approach (REA) Model Drying Technol. 2013, 31, 439-451 10.1080/07373937.2012.738753
30. Kim, E. H.-J.; Chen, X. D.; Pearce, D. On the Mechanisms of Surface Formation and the Surface Compositions of Industrial Milk Powders Drying Technol. 2003, 21, 265-278 10.1081/DRT-120017747
31. Vehring, R.; Foss, W. R.; Lechuga-Ballesteros, D. Particle Formation in Spray Drying J. Aerosol Sci. 2007, 38, 728-746 10.1016/j.jaerosci.2007.04.005
32. Bird, R. B.; Stewart, W. E.; Lightfoot. Transport Phenomena; Wiley: New York, 2002.
33. Leong, K. H. Morphological Control of Particles Generated from the Evaporation of Solution Droplets: Theoretical Considerations J. Aerosol Sci. 1987, 18, 511-524 10.1016/0021-8502(87)90066-8
34. Cussler, E. L. Diffusion Mass Transfer in Fluid Systems; Cambridge University Press: Cambridge, 1997; Cambridge Series in Chemical Engineering.
35. Tarara, T. E.; Weers, J. G.; Dellamary, L. A. Engineered Powders for Inhalation Respir. Drug Delivery VII 2000, 2, 413-416
36. Breinlinger, T.; Hashibon, A.; Kraft, T. Simulation of the Spray Drying of Single Granules: The Correlation Between Microscopic Forces and Granule Morphology J. Am. Ceram. Soc. 2015, 98, 1778 10.1111/jace.13557
37. Cundall, P. A.; Strack, O. D. L. A discrete numerical model for granular assemblies Geotechnique 1979, 29, 47-65 10.1680/geot.1979.29.1.47
38. Schilde, C.; Burmeister, C.; Kwade, A. Measurement and Simulation of Micromechanical Properties of Nanostructured Aggregates via Nanoindentation and DEM-simulation Powder Technol. 2014, 259, 1-13 10.1016/j.powtec.2014.03.042
39. Breinlinger, T.; Kraft, T. A Simple Method for Simulating the Coffee Stain Effect Powder Technol. 2014, 256, 279-284 10.1016/j.powtec.2014.02.024
40. Mindlin, R. D. Compliance of elastic bodies in contact J. Appl. Mech. 1949, 16, 259-268
41. Derjaguin, B.; Landau, L. Theory of the Stability of Strongly Charged Lyophobic Sols and of the Adhesion of Strongly Charged Particles in Solutions of Electrolytes Acta Phys. Chem. 1941, 14, 633
42. Verwey, E. J. W.; Overbeek, J. T. G. Theory of the Stability of Lyophobic Colloids; Elsevier: Amsterdam, 1948.
43. Hamaker, H. C. A General Theory of Lyophobic Colloids II Recl. Trav. Chim. Pays-Bas 1937, 56, 3-25 10.1002/recl.19370560102
44. Israelachvili, J. N. Intermolecular and Surface Forces; Academic Press: New York, 1995.
45. Breinlinger, T.; Hashibon, A.; Kraft, T. In Partikelbasierte Simulation von Trocknungsvorgängen in Suspensionen; ProcessNet-Jahrestagung: Aachen, Germany, 2014.
46. Stöber, W.; Fink, A.; Bohn, E. Controlled Growth of Monodisperse Silica Spheres in the Micron Size Range J. Colloid Interface Sci. 1968, 26, 62-69 10.1016/0021-9797(68)90272-5
47. Jaeger, S. Beiträge zur Herstellung, Charakterisierung und Testung von synthetischen Kalibriersubstanzen für die direkte Feststoffatomabsorptionsspektrometrie; Martin-Luther-Universität: Halle-Wittenberg, 2008.
48. Cheema, A. T.; Garnweitner, G. Phase-Controlled Synthesis of ZrO2 Nanoparticles for Highly Transparent Dielectric Thin Films CrystEngComm 2014, 16, 3366-3375 10.1039/C3CE42392A
49. Garnweitner, G.; Goldenberg, L. M.; Sakhno, O. V.; Antonietti, M.; Niederberger, M.; Stumpe, J. Large-Scale Synthesis of Organophilic Zirconia Nanoparticles and their Application in Organic-Inorganic Nanocomposites for Efficient Volume Holography Small 2007, 3, 1626-1632 10.1002/smll.200700075
50. Grabs, I.-M.; Bradtmöller, C.; Menzel, D.; Garnweitner, G. Formation Mechanisms of Iron Oxide Nanoparticles in Different Nonaqueous Media Cryst. Growth Des. 2012, 12, 1469-1475 10.1021/cg201563h