Applications of three-dimensional printing technology in the cardiovascular field

Internal and Emergency Medicine

Volumn 10, Issue 7, 2015, Pages 769-780

  Shi, Di ^a   Liu, Kai ^a   Zhang, Xin ^a   Liao, Hang ^a   Chen, Xiaoping ^a  

^a SICHUAN UNIVERSITY   (China)

Author keywords

3 D Printing; Application; Cardiovascular; Perspectives

Indexed keywords

ANATOMY AND HISTOLOGY; CARDIAC IMAGING; CARDIOVASCULAR SYSTEM; HUMAN; INVENTION; MICROVASCULATURE; PHYSIOLOGY; STANDARDS; SURGERY; THREE DIMENSIONAL IMAGING; THREE DIMENSIONAL PRINTING; TRENDS;

CARDIAC IMAGING TECHNIQUES; CARDIOVASCULAR SYSTEM; HUMANS; IMAGING, THREE-DIMENSIONAL; INVENTIONS; MICROVESSELS; PRINTING, THREE-DIMENSIONAL;

EID: 84942991538     PISSN: 18280447     EISSN: 19709366     Source Type: Journal    
DOI: 10.1007/s11739-015-1282-9     Document Type: Review

References (66)

1. Markl M, Schumacher R, Küffer J, Bley TA, Hennig J (2005) Rapid vessel prototyping: vascular modeling using 3t magnetic resonance angiography and rapid prototyping technology. Magn Reson Mater Phys Biol Med 18:288–292
2. Mueller, T (1995) Stereolithography-based prototyping: case histories of applications in product development. In: Northcon 95. IEEE Technical Applications Conference and Workshops Northcon 95:305–310
3. Webb PA (2000) A review of rapid prototyping (RP) techniques in the medical and biomedical sector. J Med Eng Technol 24:149–153
4. Eufinger H, Wehmöller M (1998) Individual prefabricated titanium implants in reconstructive craniofacial surgery: clinical and technical aspects of the first 22 cases. Plast Reconstr Surg 102:300–308
5. Heissler E, Fischer FS, Boiouri S, Lehrnann T, Mathar W, Gebhardt A, Bler J (1998) Custom-made cast titanium implants produced with CAD/CAM for the reconstruction of cranium defects. Int J Oral Maxillofac Surg 27:334–338
6. Joffe M, Harris F, Kahugu S, Nicoll A, Linney R, Richards J (1999) A prospective study of computer-aided design and manufacture of titanium plate for cranioplasty and its clinical outcome. Br J Neurosurg 13:576–580
7. Winder J, Cooke RS, Gray J, Fannin T, Fegan T (1999) Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. J Med Eng Technol 23:26–28
8. D’Urso PS, Effeney DJ, Earwaker WJ, Barker TM, Redmond MJ, Thompson RG, Tomlinson FH (2000) Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg 53:200–204
9. Bibb R, Bocca A, Evans P (2002) An appropriate approach to computer aided design and manufacture of cranioplasty plates. J Maxillofac Prosthet Technol 5:28–31
10. Hughes CW, Page K, Bibb R, Taylor J, Revington P (2003) The custom-made titanium orbital floor prosthesis in reconstruction for orbital floor fractures. Br J Oral Maxillofac Surg 41:50–53
11. Evans P, Eggbeer D, Bibb R (2004) Orbital prosthesis wax pattern production using computer aided design and rapid prototyping techniques. Maxillofacial Prosthetics Technol 7:11–15
12. Singare S, Dichen L, Bingheng L, Zhenyu G, Yaxiong L (2005) Customized design and manufacturing of chin implant based on rapid prototyping. Rapid Prototyp J 11:113–118
13. Bibb R, Bocca A, Sugar A, Evans P (2003) Planning osseointegrated implant sites using computer aided design and rapid prototyping. J Maxillofac Prosthe Technol 6:1–4
14. Giacomo GAD, Cury PR, Araujo NSD, Sendyk WR, Sendyk CL (2005) Clinical application of stereolithographic surgical guides for implant placement: preliminary results. J Periodontol 76:503–507
15. Goffin J, Van Brussel K, Vander Sloten J, Van Audekercke R, Smet MH, Marchal G, Verstreken K (1999) 3D-CT based, personalized drill guide for posterior transarticular screw fixation at C1-C2: technical note. Neuro-orthopedics 25:47–56
16. Goffin J, Van Brussel K, Martens K, Vander Sloten J, Van Audekercke R, Smet MH (2001) Three-dimensional computed tomography-based, personalized drill guide for posterior cervical stabilization at C1–C2. Spine 26:1343–1347
17. Sarment DP, Sukovic P, Clinthorne N (2002) Accuracy of implant placement with a stereolithographic surgical guide. Int J Oral Maxillofac Implant 18:571–577
18. Sarment DP, Al-Shammari K, Kazor CE (2003) Stereolithographic surgical templates for placement of dental implants in complex cases. Int J Periodontics Restor Dent 23:287–295
19. Riesenkampff E, Rietdorf U, Wolf I, Schnackenburg B, Ewert P, Huebler M, Kuehne T (2009) The practical clinical value of three-dimensional models of complex congenitally malformed hearts. J Thorac Cardiovasc Surg 138:571–580
20. Shiraishi I, Yamagishi M, Hamaoka K, Fukuzawa M, Yagihara T (2010) Simulative operation on congenital heart disease using rubber-like urethane stereolithographic biomodels based on 3D datasets of multislice computed tomography. Eur J Cardiothorac Surg 37:302–306
21. Rengier F, Mehndiratta A, von Tengg-Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor HU, Giesel FL (2010) 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg 5:335–341
22. Peltola SM, Melchels FP, Grijpma DW, Kellomäki M (2008) A review of rapid prototyping techniques for tissue engineering purposes. Ann Med 40:268–280
23. Eaton BD, Messent DO, Haywood IR (1990) Animal cadaveric models for advanced trauma life support training. Ann R Coll Surg Engl 72:135
24. Reuthebuch O, Lang A, Groscurth P, Lachat M, Turina M, Zünd G (2002) Advanced training model for beating heart coronary artery surgery: the Zurich heart-trainer. Eur J Cardiothorac Surg 22:244–248
25. von Segesser LK, Westaby S, Pomar J, Loisance D, Groscurth P, Turina M (1999) Less invasive aortic valve surgery: rationale and technique. Eur J Cardiothorac Surg 15:781–785
26. D’Urso PS, Barker TM, Earwaker WJ, Bruce LJ, Atkinson RL, Lanigan MW, Effeney DJ (1999) Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial. J Cranio-Maxillofac Surg 27:30–37
27. Armillotta A, Bonhoeffer P, Dubini G, Ferragina S, Migliavacca F, Sala G, Schievano S (2007) Use of rapid prototyping models in the planning of percutaneous pulmonary valved stent implantation. Proc Inst Mech Eng [H] 221:407–416
28. Jacobs S, Grunert R, Mohr FW, Falk V (2008) 3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study. Interact CardioVasc Thorac Surg 7:6–9
29. Sodian R, Weber S, Markert M, Loeff M, Lueth T, Weis FC, Reichart B (2008) Pediatric cardiac transplantation: three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart. J Thorac Cardiovasc Surg 136:1098–1099
30. Sodian R, Weber S, Markert M, Rassoulian D, Kaczmarek I, Lueth TC, Daebritz S (2007) Stereolithographic models for surgical planning in congenital heart surgery. Ann Thorac Surg 83:1854–1857
31. Sodian R, Schmauss D, Markert M, Weber S, Nikolaou K, Haeberle S, Schmitz C (2008) Three-dimensional printing creates models for surgical planning of aortic valve replacement after previous coronary bypass grafting. Ann Thorac Surg 85:2105–2108
32. Abdel-Sayed P, Kalejs M, von Segesser LK (2009) A new training set-up for trans-apical aortic valve replacement. Interact Cardiovasc Thorac Surg 8:599–601
33. Greil GF, Wolf I, Kuettner A, Fenchel M, Miller S, Martirosian P, Sieverding L (2007) Stereolithographic reproduction of complex cardiac morphology based on high spatial resolution imaging. Clin Res Cardiol 96:176–185
34. Noecker AM, Chen JF, Zhou Q, White RD, Kopcak MW, Arruda MJ, Duncan BW (2006) Development of patient-specific three-dimensional pediatric cardiac models. ASAIO J 52:349–353
35. Vranicar M, Gregory W, Douglas WI, Di Sessa P, Di Sessa TG (2007) The use of stereolithographic hand held models for evaluation of congenital anomalies of the great arteries. Stud Health Technol Inform 132:538–543
36. Mottl-Link S, Hübler M, Kühne T, Rietdorf U, Krueger JJ, Schnackenburg B, Wolf I (2008) Physical models aiding in complex congenital heart surgery. Ann Thoracic Surg 86:273–277
37. Ngan EM, Rebeyka IM, Ross DB, Hirji M, Wolfaardt JF, Seelaus R, Noga ML (2006) The rapid prototyping of anatomic models in pulmonary atresia. J Thorac Cardiovasc Surg 132:264–269
38. Schmauss D, Gerber N, Sodian R (2013) Three-dimensional printing of models for surgical planning in patients with primary cardiac tumors. J Thorac Cardiovasc Surg 5:1407–1408
39. Binder TM, Moertl D, Mundigler G, Rehak G, Franke M, Delle-Karth G, Maurer G (2000) Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data: in vitro and in vivo validation. J Am Coll Cardiol 35:230–237
40. Miller SF, Sanz-Guerrero J, Dodde RE, Johnson DD, Bhawuk A, Gurm HS, Shih AJ (2013) A pulsatile blood vessel system for a femoral arterial access clinical simulation model. Med Eng Phys 35:1518–1524
41. Sodian R, Schmauss D, Schmitz C, Bigdeli A, Haeberle S, Schmoeckel M, Kozlik-Feldmann R (2009) 3-dimensional printing of models to create custom-made devices for coil embolization of an anastomotic leak after aortic arch replacement. Ann Thorac Surg 88:974–978
42. Kim MS, Hansgen AR, Carroll JD (2008) Use of rapid prototyping in the care of patients with structural heart disease. Trends Cardiovasc Med 18:210–216
43. Schievano S, Migliavacca F, Coats L, Khambadkone S, Carminati M, Wilson N, Taylor AM (2007) Percutaneous pulmonary valve implantation based on rapid prototyping of right ventricular outflow tract and pulmonary trunk from MR data 1. Radiology 242:490–497
44. Schmauss D, Schmitz C, Bigdeli AK, Weber S, Gerber N, Beiras-Fernandez A, Sodian R (2012) Three-dimensional printing of models for preoperative planning and simulation of transcatheter valve replacement. Ann Thorac Surg 93:e31–e33
45. Hong MK, Mintz GS, Lee CW, Park DW, Choi BR, Park KH, Park SJ (2006) Intravascular ultrasound predictors of angiographic restenosis after sirolimus-eluting stent implantation. Eur Heart J 27:1305–1310
46. Lantada AD, Del Valle-Fernández R, Morgado PL, Muñoz-García J, Sanz JLM, Munoz-Guijosa JM, Otero JE (2010) Development of personalized annuloplasty rings: combination of CT images and CAD-CAM tools. Ann Biomed Eng 38:280–290
47. Hernández JM et al (2005) Manual de Cardiología Intervencionista. Sociedad Española de Cardiología, Sección de Hemodinámica y Cardiología Intervencionista
48. Porth, C (2007) Fisiopatología. Salud Enfermedad: Un Enfoque Conceptual. Trastornos de la función cardiaca (7th edn). Madrid: Editorial Médica Panamericana pp 535–579
49. Taylor PM, Sachlos E, Dreger SA, Chester AH, Czernuszka JT, Yacoub MH (2006) Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping. Biomaterials 27:2733–2737
50. Mol A, Smits AI, Bouten CV, Baaijens FP (2009) Tissue engineering of heart valves: advances and current challenges. Expert Rev Med Devices 6:259–275
51. Hockaday LA, Kang KH, Colangelo NW, Cheung PYC, Duan B, Malone E, Butcher JT (2012) Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds. Biofabrication 4:035005
52. Atala A, Bauer SB, Soker S, Yoo JJ, Retik AB (2006) Tissue-engineered autologous bladders for patients needing cystoplasty. The lancet 367:1241–1246
53. Jain RK, Au P, Tam J, Duda DG, Fukumura D (2005) Engineering vascularized tissue. Nat Biotechnol 23:821–823
54. Levenberg S, Rouwkema J, Macdonald M, Garfein ES, Kohane DS, Darland DC, Langer R (2005) Engineering vascularized skeletal muscle tissue. Nat Biotechnol 23:879–884
55. Cui X, Boland T (2009) Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials 30:6221–6227
56. Rosamond W et al (2007) Heart disease and stroke statistics—2007 update: a report from the American Heart Association Statistics Committee and Stroke Statistics Subcommittee. Circulation 115:e69–e171
57. Boland T, Xu T, Damon B, Cui X (2006) Application of inkjet printing to tissue engineering. Biotechnol J 1:910–917
58. Barnatt C (2011) Organ printing concept. Bioprinter_Holdout (Ed) (Online). http://www.ExplainingTheFuture.com
59. Mironov V, Kasyanov V, Markwald RR (2011) Organ printing: from bioprinter to organ biofabrication line. Curr Opin Biotechnol 22:667–673
60. Xu C, Chai W, Huang Y, Markwald RR (2012) Scaffold-free inkjet printing of three-dimensional zigzag cellular tubes. Biotechnol Bioeng 109:3152–3160
61. Thein-Han WW, Kitiyanant Y (2007) Chitosan scaffolds for in vitro buffalo embryonic stem-like cell culture: An approach to tissue engineering. J Biomed Mater Res B Appl Biomater 80:92–101
62. Tuan RS, Boland G, Tuli R (2003) Adult mesenchymal stem cells and cell-based tissue engineering. Arthritis Res Ther 5:32–45
63. Lam MT, Longaker MT (2012) Comparison of several attachment methods for human iPS, embryonic and adipose-derived stem cells for tissue engineering. J Tissue Eng Regen Med 6:s80–s86
64. Seol D, McCabe DJ, Choe H, Zheng H, Yu Y, Jang K, Martin JA (2012) Chondrogenic progenitor cells respond to cartilage injury. Arthritis Rheum 64:3626–3637
65. Yu Y (2012) Identification and characterization of cartilage progenitor cells by single cell sorting and cloning. University of Iowa, Iowa City
66. Ozbolat IT, Yu Y (2013) Bioprinting toward organ fabrication: challenges and future trends. IEEE Transactions on Biomedical Engineering 60: 691–699