Characterization and use of coir, almond, apricot, argan, shells, and wood as reinforcement in the polymeric matrix in order to valorize these products

Agricultural Biomass Based Potential Materials

Volumn , Issue , 2015, Pages 305-339

  Qaiss, Abouelkacem ^a   Bouhfid, Rachid ^a   Essabir, Hamid ^a,b  

^a Moroccan Foundation for Advanced Science   (Morocco)

^b IBN ZOHR UNIVERSITY   (Morocco)

Author keywords

Almond; Apricot; Argan; Coir; Polymer matrix; Shells

Indexed keywords

ADHESION; BIODEGRADABILITY; BIODEGRADABLE POLYMERS; CHEMICAL ANALYSIS; COSTS; COUPLING AGENTS; CRYSTALLINITY; DIFFERENTIAL SCANNING CALORIMETRY; EXTRUSION MOLDING; FILLED POLYMERS; FILLERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; INJECTION MOLDING; NATURAL RESOURCES; PHYSICAL PROPERTIES; POLYMER MATRIX; REINFORCEMENT; SHELLS (STRUCTURES); TENSILE STRENGTH; THERMOGRAVIMETRIC ANALYSIS;

ALMOND; APRICOT; ARGAN; COIR; SHELLS;

POLYMER MATRIX COMPOSITES;

EID: 84942159316     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-13847-3_15     Document Type: Book

References (48)

1. Arrakhiz FZ, El Achaby M, Benmoussa K, Bouhfid R, Essassi M, Qaiss A (2012a) Evaluation of mechanical and thermal properties of Pine cone fibers reinforced compatibilized polypropylene. Mater Des 40:528-535
2. Arrakhiz FZ, El Achaby M, Kakou AC, Vaudreuil S, Benmoussa K, Bouhfid R, Fassi-Fehri O, Qaiss A (2012b) Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: impact of chemical treatments. Mater Des 37:379-383
3. Arrakhiz FZ, Elachaby M, Bouhfid R, Vaudreuil S, Essassi M, Qaiss A (2012c) Mechanical and thermal properties of polypropylene reinforced with Alfa fiber under different chemical treatment. Mater Des 35:318-322
4. Arrakhiz FZ, Benmoussa K, Bouhfid R, Qaiss A (2013a) Pine cone fiber/clay hybrid composite: mechanical and thermal properties. Mater Des 50:376-381
5. Arrakhiz FZ, Malha M, Bouhfid R, Benmoussa K, Qaiss A (2013b) Tensile, flexural and torsional properties of chemically treated alfa, coir and bagasse reinforced polypropylene. Compos Part B Eng 47:35-41
6. Arrakhiz FZ, El Achaby M, Malha M, Bensalah MO, Fassi-Fehri O, Bouhfid R, Benmoussa K, Qaiss A (2013c) Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene. Mater Des 43:200-205
7. Ayrilmis N, Kaymakci A (2013) Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood. Ind Crop Prod 43:457-464
8. Boujmal R, Essabir H, Nekhlaoui S, Bensalah MO, Bouhfid R, Qaiss A (2014) Composite from Polypropylene and Henna fiber: structural, mechanical and thermal properties. J Biobas Mater Bioenergy 8:246-252
9. Dehghani A, Ardekani SM, Al-Maadeed MA, Azman H, Wahit MU (2013) Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites. Mater Des 52:841-848
10. Demiral I, Kul SC (2014) Pyrolysis of apricot kernel shell in a fixed-bed reactor: characterization of bio-oil and char. J Anal Appl Pyrol 107:17-24
11. Elkhaoulani A, Arrakhiz FZ, Benmoussa K, Bouhfid R, Qaiss A (2013) Mechanical and thermal properties of polymer composite based on natural fibers: moroccan hemp fibers/polypropyl-ene. Mater Des 49:203-208
12. Essabir H, Elkhaoulani A, Benmoussa K, Bouhfid R, Arrakhiz FZ, Qaiss A (2013a) Dynamic mechanical thermal behavior analysis of doum fibers reinforced polypropylene composites. Mater Des 41:780-788
13. Essabir H, Hilali E, Elgharad A, El Minor H, Imad A, Elamraoui A, Al Gaoudi O (2013b) Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles. Mater Des 49:442-448
14. Essabir H, Nekhlaoui S, Malha M, Bensalah MO, Arrakhiz FZ, Qaiss A, Bouhfid R (2013c) Bio-composites based on polypropylene reinforced with almond shells particles: mechanical and thermal properties. Mater Des 51:225-230
15. Essabir H, Bensalah MO, Bouhfid R, Qaiss A (2014) Fabrication and characterization of Apricot shells particles reinforced high density polyethylene based bio-composites: mechanical and thermal properties. J Biobas Mater Bioenergy 8:344-351
16. Etaati A, Pather S, Fang Z, Wang H (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Compos Part B Eng 62:19-28
17. Gamon G, Evon PH, Rigal L (2013) Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites. Ind Crop Prod 46:173-185
18. Hao A, Zhao H, Chen JY (2013) Kenaf/polypropylene nonwoven composites: the influence of manufacturing conditions on mechanical, thermal, and acoustical performance. Compos Part B 54:44-51
19. Harhar H, Gharby S, Kartah B, Pioch D, Guillaume D, Charrouf Z (2014) Effect of harvest date of Argania spinosa fruits on Argan oil quality. Ind Crop Prod 56:156-159
20. Herrera R, Erdocia X, Llano-Ponte R, Labidi J (2014) Characterization of hydrothermally treated wood in relation to changes on its chemical composition and physical properties. J Anal Appl Pyrol 107:256-266
21. Holt GA, Chow P, Wanjura JD, Pelletier MG, Wedegaertner TC (2014) Evaluation of thermal treatments to improve physical and mechanical properties of bio-composites made from cotton byproducts and other agricultural fibers. Ind Crop Prod 52:627-632
22. Huu Nam T, Ogihara S, Huy Tung N, Kobayashi S (2011) Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly (butylenes succinate) biodegradable composites. Compos Part B Eng 42(6):1648-1656
23. ISO 527-1 (2012) Plastics-determination of tensile properties-part 1: general principles
24. Kuciel S, Jakubowska P, Kuzniar P (2014) A study on the mechanical properties and the influence of water uptake and temperature on biocomposites based on polyethylene from renewable sources. Compos Part B Eng 64:72-77
25. Luo X, Li J, Feng J, Yang T, Lin X (2014) Mechanical and thermal performance of distillers grains filled poly(butylene succinate) composites. Mater Design 57:195-200
26. Malha M, Nekhlaoui S, Essabir H, Benmoussa K, Bensalah M-O, Arrakhiz F-Z, Bouhfid R, Qaiss A (2013) Mechanical and thermal properties of compatibilized polypropylene reinforced by Woven Doum. J Appl polym Sci 130(6):4347-4356
27. Mir SS, Nafsin N, Hasan M, Hasan N, Hassan A (2013) Improvement of physico-mechanical properties of coir-polypropylene biocomposites by fiber chemical treatment. Mater Des 52:251-257
28. Mirmehdi M, Zeinaly F, Dabbagha F (2014) Date palm wood flour as filler of linear low-density polyethylene. Compos Part B Eng 56:137-141
29. Najafi SK (2013) Use of recycled plastics in wood plastic composites-a review. Waste Manag 33:1898-1905
30. Nekhlaoui S, Essabir H, Kunal D, Sonakshi M, Bensalah MO, Bouhfid R, Qaiss A (2014a) Comparative study for the talc and two kinds of Moroccan clay as reinforcements in polypropylene-SEBS-g-MA matrix. Polym Compos. doi: 10.1002/pc.22986
31. Nekhlaoui S, Essabir H, Bensalah MO, Fassi-Fehri O, Qaiss A, Bouhfid R (2014b) Fracture study of the composite using essential work of fracture method: PP-SEBS-g-MA/E1 clay. Mater Des 53:741-748
32. Ou R, Xie Y, Wolcott MP, Sui S, Wang Q (2014) Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: effect of removal of wood cell wall composition. Mater Des 58:339-345
33. Parparita E, Darie RN, Popescu C-M, Uddin Md A, Vasile C (2014) Structure-morphology- mechanical properties relationship of some polypropylene/lignocellulosic composites. Mater Des 56:763-772
34. Pérez E, Famá L, Pardo SG, Abad MJ, Bernal C (2012) Tensile and fracture behaviour of PP/wood flour composites. Compos Part B Eng 43:2795-2800
35. Qaiss A, Bousmina M (2011) Biaxial stretching of polymers using a novel and versatile stretching system. Polym Eng Sci 51:1347-1353
36. Qaiss A, Saidi H, Fassi-Fehri O, Bousmina M (2012) Cellular polypropylene-based piezoelectric films. Polym Eng Sci 52:2637-2644
37. Qaiss A, Saidi H, Fassi-Fehri O, Bousmina M (2013) Theoretical modeling and experiments on the piezoelectric coefficient in cellular polymer films. Polym Eng Sci 53:105-111
38. Sahari J, Sapuan SM, Zainudin ES, Maleque MA (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Mater Des 49:285-289
39. Salleh Md F, Hassan A, Yahya R, Azzahari AD (2014) Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites. Compos Part B Eng 58:259-266
40. Shinoj S, Visvanathan R, Panigrahi S, Varadharaju N (2011) Dynamic mechanical properties of oil palm fibre (OPF)-linear low density polyethylene (LLDPE) biocomposites and study of fibre-matrix interactions. Biosyst Eng 109:1099-1107
41. Sliwa F, Bounia N, Charrier F, Marin G, Malet F (2012) Mechanical and interfacial properties of wood and bio-based thermoplastic composite. Compos Sci Technol 72:1733-1740
42. Spiridon I, Paduraru OM, Rudowski M, Kozlowski M, Darie RN (2012) Assessment of changes due to accelerated weathering of low-density polyethylene/feather composites. Ind Eng Chem Res 51:7279-7286
43. Sreenivasan VS, Ravindran D, Manikandan V, Narayanasamy R (2012) Influence of fibre treatments on mechanical properties of short Sansevieria cylindrica/polyester composites. Mater Des 37:111-121
44. Tazi M, Erchiqui F, Godard F, Kaddami H, Ajji A (2014) Characterization of rheological and thermophysical properties of HDPE-wood composite. J Appl Polym Sci. doi: 10.1002/app.40495
45. Tiryaki B, Yagmur E, Banford A, Aktas Z (2014) Comparison of activated carbon produced from natural biomass and equivalent chemical compositions. J Anal Appl Pyrol 105:276-283
46. Wever Diego-Armando Z, Heeres HJ, Broekhuis A (2012) Characterization of Physic nut (Jatropha curcas L.) shells. Biomass Bioenerg 37:177-187
47. Yao ZT, Chen T, Li HY, Xia MS, Ye Y, Zheng H (2013) Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste. J Hazard Mater 262:212-217
48. Zhang H (2014) Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood-plastic composites. Mater Des 59:130-134