Determination of S, Ca, Fe, Ni and V in crude oil by energy dispersive X-ray fluorescence spectrometry using direct sampling on paper substrate

Fuel

Volumn 162, Issue , 2015, Pages 39-46

  Doyle, A ^a   Saavedra, A ^b   Tristao M L B ^b   Aucelio, R Q ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^b PETROBRAS   (Brazil)

Author keywords

Crude oil analysis; Energy dispersive X ray fluorescence spectrometry; Fundamental parameters; Metal determination; Sulfur determination

Indexed keywords

ABSORPTION SPECTROSCOPY; ATOMIC ABSORPTION SPECTROMETRY; CALCIUM; CRUDE OIL; ENERGY DISPERSIVE SPECTROSCOPY; FLUORESCENCE; FLUORESCENCE SPECTROSCOPY; IRON COMPOUNDS; METAL ANALYSIS; NICKEL; PLASTIC FILMS; POLYPROPYLENES; SPECTROMETRY; SULFUR; SULFUR DETERMINATION;

DIRECT DETERMINATION; ENERGY DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIES; FLAME ATOMIC ABSORPTION SPECTROMETRY; FUNDAMENTAL PARAMETERS; METAL DETERMINATION; OIL ANALYSIS; POLY-PROPYLENE FILM; SULFUR CONTAINING COMPOUND;

PETROLEUM ANALYSIS;

EID: 84941792384     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2015.08.072     Document Type: Article

References (43)

1. K.H. Angeyo, S. Gari, A.O. Mustapha, and J.M. Mangala Feasibility for direct rapid energy dispersive X-ray fluorescence (EDXRF) and scattering analysis of complex matrix liquids by partial least squares Appl Radiat Isot 70 2012 2596 2601
2. C. Duyck, N. Miekeley, C.L.P. Silveira, R.Q. Aucelio, R.C. Campos, P. Grinberg, and et al. The determination of trace elements in crude oil and its heavy fractions by atomic spectrometry Spectrochim Acta, Part B 62 2007 939 951
3. G. Caumette, C.P. Lienemann, I. Merdrignac, B. Bouyssiere, and R. Lobinski Element speciation analysis of petroleum and related materials J Anal Atom Spectrom 24 2009 263 276
4. F. Pasti, A. Torboli, C. Zanetti, and M. Marchi A new method for the determination of S, V, Fe, Mi, Pb and other elements in some distilled fractions of crude petroleum by TXRF J Phys IV 6 1996 627 633
5. N. Ojeda, E.D. Greaves, J. Alvarado, and L. Sajo-Bohus Determination of V, Fe, Ni and S in petroleum crude oil by total-reflexion X-ray fluorescence Spectrochim Acta, Part B 48 1993 247 253
6. M.G.A. Korn, D.S.S. dos Santos, B. Welz, M.G.R. Vale, A.P. Teixeira, D.C. Lima, and et al. Atomic spectrometric methods for the determination of metals and metalloids in automotive fuels - a review Talanta 73 2007 1 11
7. J.G. Speight Chemical composition Handbook of petroleum analysis 2001 John Wiley and Sons Inc. New York 41 45
8. M. Bettinelli, and P. Tittarelli Evaluation and validation of instrumental procedures for the determination of nickel and vanadium in fuel oils J Anal Atom Spectrom 9 1994 805 812
9. F.A.C. Amorim, B. Welz, A.C.S. Costa, F.G. Lepri, M.G.R. Vale, and S.L.C. Ferreira Determination of vanadium in petroleum and petroleum products using atomic spectrometric techniques Talanta 72 2007 349 359
10. ASTM D 5863-00a Standard test methods for determination of nickel, vanadium, iron, and sodium in crude oils and residual fuels by flame atomic absorption spectrometry ASTM Int 2011 10.1520/D5863-00AR11
11. ASTM D 5708-12 Standard test methods for determination of nickel, vanadium, and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry ASTM Int 2012 10.1520/D5708-12
12. ASTM D 7691-11e1 Standard test method for multielement analysis of crude oils using inductively coupled plasma atomic emission spectrometry (ICP-AES) ASTM Int 2011 10.1520/D7691-11
13. R. Sanchez, J.L. Todolí, C.P. Lienemann, and J.M. Mermet Determination of trace elements in petroleum products by inductively coupled plasma technical: a critical review Spectrochim Acta Part B 88 2013 104 126
14. ASTM D 5453-12 Standard test method for determination of total sulfur in light hydrocarbons, spark ignition engine fuel, diesel engine fuel, and engine oil by ultraviolet fluorescence ASTM Int 2012 10.1520/D5453-12
15. ASTM D 1266-13 Standard test method for sulfur in petroleum products (lamp method) ASTM Int 2013 10.1520/D1266
16. R.Q. Aucelio, A. Doyle, B.S. Pizzorno, M.L.B. Tristão, and R.C. Campos Electrothermal atomic absorption spectrometric method for the determination of vanadium in diesel and asphaltene prepared as detergentless microemulsions Microchem J 78 2004 21 26
17. C.J. Lord Determination of trace metals in crude oil by inductively coupled plasma mass spectrometry with micro-emulsion sample introduction Anal Chem 63 63 1991 1594 1599
18. T. Wondimu, W. Goessler, and K.J. Irgolic Microwave digestion of residual fuel oil for the determination of trace elements by inductively coupled plasma mass spectrometry Fresenius J Anal Chem 367 2000 35 42
19. L.H. Christensen, and A. Agerbo Determination of sulfur and heavy metals in crude oil and petroleum products by energy-dispersive X-ray fluorescence spectrometry and fundamental parameter approach Anal Chem 53 1981 1788 1792
20. L.S.G. Teixeira, R.B.S. Rocha, E.V. Sobrinho, P.R.B. Guimarães, L.A.M. Pontes, and J.S.R. Teixeira Simultaneous determination of copper and iron in automotive gasoline by X-ray fluorescence after pré-concentration on cellulose paper Talanta 72 2007 1073 1076
21. E.R. Denoyer, and L.A. Siegel Determination of sulfur, nickel and vanadium in fuel and residual oils by X-ray fluorescence spectrometry Anal Chim Acta 192 1987 361 366
22. ISO 14597. Petroleum products - determination of vanadium and nickel content: wavelength-dispersive X-ray fluorescence spectrometry. International Organization for Standardization; 1997.
23. ASTM D 4927-10 Standard test methods for elemental analysis of lubricant and additive components - barium, calcium, phosphorus, sulfur, and zinc by wavelength-dispersive X-ray fluorescence spectroscopy ASTM Int 2010 10.1520/D4927-10
24. ASTM D 6443-04 Standard test method for determination of calcium, chlorine, copper, magnesium, phosphorus, sulfur, and zinc in unused lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (mathematical correction procedure) ASTM Int 2010 10.1520/D6443-04R10
25. ASTM D 6481-99 Standard test method for determination of phosphorus, sulfur, calcium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy ASTM Int 2010 10.1520/D6481-99R10
26. ASTM D 2622-10 Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry ASTM Int 2010 10.1520/D2622-10
27. ASTM D 4294-10 Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry ASTM Int 2010 10.1520/D4294-10
28. ISO 14596. Petroleum products - determination of sulfur content - wavelength-dispersive X-ray fluorescence spectrometry. International Organization for Standardization; 2007.
29. I.O. Akpan, E.J. Uwah, and F.A.N. Osadebe Application of total reflection X-ray fluorescence (TXRF) technique for elemental analysis of Nigerian crude oils Nigerian J Phys 17 2005 103 107
30. E. Marguí, R. Van Grieken, C. Fontàs, M. Hidalgo, and I. Queralt Preconcentration methods for the analysis of liquid samples by X-ray fluorescence techniques Appl Spec Rev 49 2010 179 205
31. E. Marguí, B. Zawisza, and R. Sitko Trace and ultratrace analysis of liquid samples by X-ray fluorescence spectrometry Trends Anal Chem 53 2014 73 83
32. S. Igarashi, A. Takahashi, Y. Ueki, and H. Yamaguchi Homogeneous liquid-liquid extraction followed by X-ray fluorescence spectrometry of a microdroplet on filter-paper for the simultaneous determination of small amounts of metals Analyst 125 2000 797 798
33. B.L. Larner, and A.J. Seen Evaluation of paper-based diffusive gradients in thin film samplers for trace metal sampling Anal Chim Acta 539 2005 349 355
34. E. de Almeida, V.F.N. Filho, and A.A. Menegário Paper-based diffusive gradientes in thin films technique coupled to energy dispersive X-ray fluorescence spectrometry for the determination of labile Mn Co, Mi, Cu, Zn and Pb in river water Spectrochim Acta Part B 71-72 2012 70 74
35. K. Iwasaki, and K. Tanaka Preconcentration and X-ray fluorescence determination of vanadium, nickel and iron in residual fuel oils and in particulate material from oil-fired sources Anal Chim Acta 136 1982 293 299
36. http://www.chemplex.com/thin-film-selection-guide [24.08.15].
37. T. Shiraiwa, and N. Fujino Theoretical calculation of fluorescent X-ray intensities in fluorescent X-ray spectrochemical analysis Jpn J Appl Phys 5 1966 886 899
38. Sitko Rafał, Zawisza Beata. Quantification in X-ray fluorescence spectrometry. In: Sharma Shatendra K, editor. X-ray spectroscopy. InTech; 2012. http://dx.doi.org/10.5772/29367, < http://www.intechopen.com/books/x-ray-spectroscopy/quantification-in-x-ray-fluorescence-spectrometry > [ISBN: 978-953-307-967-7].
39. J.L. de Vries, and B.A.R. Vrebos Quantification of infinitely thick specimen by XRF analysis R. Van Grieken, A. Markowicz, Handbook of X-ray spectrometry 2nd ed. 2002 Marcel Dekker New York 341 405
40. ASTM D5854-96R15. Standard practice for mixing and handling of liquid samples of petroleum and petroleum products. ASTM Int. http://dx.doi.org/10.1520/D5854-96R15.
41. A. Doyle, A. Saavedra, M.L.B. Tristão, M. Nele, and R.Q. Aucelio Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: an improved method based on a proper strategy for sample homogenization and calibration with inorganic standards Spectrochim Acta Part B 66 2011 368 372
42. A.A. Markowicz, and R.E. Van Grieken Quantification in XRF analysis of intermediate-thickness samples R. Van Grieken, A. Markowicz, Handbook of X-ray spectrometry 2nd ed. 2002 Marcel Dekker New York [chapter 6]
43. R.M. Rousseau Detection limits and estimate of uncertainty of analytical XRF results Rigaku J 18 2001 33 47