Initiated Chemical Vapor Deposition (iCVD) of Highly Cross-Linked Polymer Films for Advanced Lithium-Ion Battery Separators

ACS Applied Materials and Interfaces

Volumn 7, Issue 33, 2015, Pages 18849-18855

  Yoo, Youngmin ^a   Kim, Byung Gon ^a   Pak, Kwanyong ^a   Han, Sung Jae ^b   Song, Heon Sik ^b   Choi, Jang Wook ^a   Im, Sung Gap ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^b LG Chemical Ltd   (South Korea)

Author keywords

electrolyte wettability; initiated chemical vapor deposition (iCVD); Li ion battery separator; poly hexavinyldisiloxane (pHVDS); thermal stability

Indexed keywords

CHEMICAL STABILITY; CHEMICAL VAPOR DEPOSITION; COATINGS; CROSSLINKING; DEPOSITION; ELECTRIC BATTERIES; ELECTROLYTES; IONS; LITHIUM; LITHIUM ALLOYS; LITHIUM COMPOUNDS; PLASTIC COATINGS; POLYETHYLENES; POLYMER FILMS; POLYMERS; PORE SIZE; SEPARATORS; SHRINKAGE; THERMODYNAMIC STABILITY; THICKNESS MEASUREMENT; ULTRATHIN FILMS; VAPOR DEPOSITION; WETTING;

ADVANCED LITHIUM-ION BATTERIES; COATING THICKNESS; CROSS-LINKED POLYMERS; INITIATED CHEMICAL VAPOR DEPOSITIONS; LI-ION BATTERIES; POLY HEXAVINYLDISILOXANE (PHVDS); POLYMERIC SEPARATOR; VAPOR PHASE DEPOSITION;

LITHIUM-ION BATTERIES;

EID: 84940416469     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/acsami.5b05720     Document Type: Article

References (38)

1. Tarascon, J. M.; Armand, M. Issues and Challenges Facing Rechargeable Lithium Batteries Nature 2001, 414 (6861) 359-367 10.1038/35104644
2. Li, H.; Wang, Z. X.; Chen, L. Q.; Huang, X. J. Research on Advanced Materials for Li-ion Batteries Adv. Mater. 2009, 21 (45) 4593-4607 10.1002/adma.200901710
3. Hassoun, J.; Panero, S.; Reale, P.; Scrosati, B. A New, Safe, High-Rate and High-Energy Polymer Lithium-Ion Battery Adv. Mater. 2009, 21 (47) 4807-4810 10.1002/adma.200900470
4. Lu, L. G.; Han, X. B.; Li, J. Q.; Hua, J. F.; Ouyang, M. G. A Review on the Key Issues for Lithium-ion Battery Management in Electric Vehicles J. Power Sources 2013, 226, 272-288 10.1016/j.jpowsour.2012.10.060
5. Kang, B.; Ceder, G. Battery Materials for Ultrafast Charging and Discharging Nature 2009, 458 (7235) 190-193 10.1038/nature07853
6. Armand, M.; Tarascon, J. M. Building Better Batteries Nature 2008, 451 (7179) 652-657 10.1038/451652a
7. Goodenough, J. B.; Kim, Y. Challenges for Rechargeable Li Batteries Chem. Mater. 2010, 22 (3) 587-603 10.1021/cm901452z
8. Liu, C.; Li, F.; Ma, L. P.; Cheng, H. M. Advanced Materials for Energy Storage Adv. Mater. 2010, 22 (8) E28-E62 10.1002/adma.200903328
9. Zhang, S. S. A Review on the Separators of Liquid Electrolyte Li-ion Batteries J. Power Sources 2007, 164 (1) 351-364 10.1016/j.jpowsour.2006.10.065
10. Venugopal, G.; Moore, J.; Howard, J.; Pendalwar, S. Characterization of Microporous Separators for Lithium-ion Batteries J. Power Sources 1999, 77 (1) 34-41 10.1016/S0378-7753(98)00168-2
11. Zhang, J. J.; Liu, Z. H.; Kong, Q. S.; Zhang, C. J.; Pang, S. P.; Yue, L. P.; Wang, X. J.; Yao, J. H.; Cui, G. L. Renewable and Superior Thermal-Resistant Cellulose-Based Composite Nonwoven as Lithium-Ion Battery Separator ACS Appl. Mater. Interfaces 2013, 5 (1) 128-134 10.1021/am302290n
12. Arora, P.; Zhang, Z. M. Battery Separators Chem. Rev. 2004, 104 (10) 4419-4462 10.1021/cr020738u
13. Jeong, H. S.; Lee, S. Y. Closely Packed SiO2 Nanoparticles/Poly(vinylidene fluoride-hexafluoropropylene) Layers-coated Polyethylene Separators for Lithium-ion Batteries J. Power Sources 2011, 196 (16) 6716-6722 10.1016/j.jpowsour.2010.11.037
14. Cho, T. H.; Tanaka, M.; Ohnishi, H.; Kondo, Y.; Yoshikazu, M.; Nakamura, T.; Sakai, T. Composite Nonwoven Separator for Lithium-ion Battery: Development and Characterization J. Power Sources 2010, 195 (13) 4272-4277 10.1016/j.jpowsour.2010.01.018
15. Shin, W. K.; Kim, D. W. High Performance Ceramic-coated Separators Prepared with Lithium Ion-containing SiO2 Particles for Lithium-ion Batteries J. Power Sources 2013, 226, 54-60 10.1016/j.jpowsour.2012.10.082
16. Ryou, M. H.; Lee, D. J.; Lee, J. N.; Lee, Y. M.; Park, J. K.; Choi, J. W. Excellent Cycle Life of Lithium-Metal Anodes in Lithium-Ion Batteries with Mussel-Inspired Polydopamine-Coated Separators Adv. Energy Mater. 2012, 2 (6) 645-650 10.1002/aenm.201100687
17. Jung, Y. S.; Cavanagh, A. S.; Gedvilas, L.; Widjonarko, N. E.; Scott, I. D.; Lee, S. H.; Kim, G. H.; George, S. M.; Dillon, A. C. Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes Adv. Energy Mater. 2012, 2 (8) 1022-1027 10.1002/aenm.201100750
18. Choi, E. S.; Lee, S. Y. Particle Size-dependent, Tunable Porous Structure of a SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated Poly(ethylene terephthalate) Nonwoven Composite Separator for a Lithium-ion Battery J. Mater. Chem. 2011, 21 (38) 14747-14754 10.1039/c1jm12246k
19. Orendorff, C. J.; Lambert, T. N.; Chavez, C. A.; Bencomo, M.; Fenton, K. R. Polyester Separators for Lithium-Ion Cells: Improving Thermal Stability and Abuse Tolerance Adv. Energy Mater. 2013, 3 (3) 314-320 10.1002/aenm.201200292
20. Im, S. G.; Gleason, K. K. Solvent-free Modification of Surfaces with Polymers: The Case for Initiated and Oxidative Chemical Vapor Deposition (CVD) AIChE J. 2011, 57 (2) 276-285 10.1002/aic.12522
21. Yoo, Y.; You, J. B.; Choi, W.; Im, S. G.; Stacked, A. Polymer Film for Robust Superhydrophobic Fabrics Polym. Chem. 2013, 4 (5) 1664-1671 10.1039/c2py20963b
22. Yoo, G.; Yoo, Y.; Kwon, J. H.; Darpito, C.; Mishra, S. K.; Pak, K.; Park, M. S.; Im, S. G.; Yang, J. W. An Effective, Cost-efficient Extraction Method of Biomass from Wet Microalgae with a Functional Polymeric Membrane Green Chem. 2014, 16 (1) 312-319 10.1039/C3GC41695J
23. Coclite, A. M.; Ozaydin-Ince, G.; d'Agostino, R.; Gleason, K. K. Flexible Cross-Linked Organosilicon Thin Films by Initiated Chemical Vapor Deposition Macromolecules 2009, 42 (21) 8138-8145 10.1021/ma901431m
24. Kim, B. G.; Kim, S.; Lee, H.; Choi, J. W. Wisdom from the Human Eye: A Synthetic Melanin Radical Scavenger for Improved Cycle Life of Li-O2 Battery Chem. Mater. 2014, 26 (16) 4757-4764 10.1021/cm501578v
25. Rau, C.; Kulisch, W. Mechanisms of Plasma Polymerization of Various Silico-Organic Monomers Thin Solid Films 1994, 249 (1) 28-37 10.1016/0040-6090(94)90081-7
26. Kim, D. W.; Ko, J. M.; Chun, J. H.; Kim, S. H.; Park, J. K. Electrochemical Performances of Lithium-ion Cells Prepared with Polyethylene Oxide-coated Separators Electrochem. Commun. 2001, 3 (10) 535-538 10.1016/S1388-2481(01)00214-4
27. Ryou, M. H.; Lee, Y. M.; Park, J. K.; Choi, J. W. Mussel-Inspired Polydopamine-Treated Polyethylene Separators for High-Power Li-Ion Batteries Adv. Mater. 2011, 23 (27) 3066-3070 10.1002/adma.201100303
28. Yamada, A.; Chung, S. C.; Hinokuma, K. Optimized LiFePO4 for Lithium Battery Cathodes J. Electrochem. Soc. 2001, 148 (3) A224-A229 10.1149/1.1348257
29. Padhi, A. K.; Nanjundaswamy, K. S.; Goodenough, J. B. Phospho-olivines as Positive-electrode Materials for Rechargeable Lithium Batteries J. Electrochem. Soc. 1997, 144 (4) 1188-1194 10.1149/1.1837571
30. Wang, J. J.; Sun, X. L. Olivine LiFePO4: the Remaining Challenges for Future Energy Storage Energy Environ. Sci. 2015, 8 (4) 1110-1138 10.1039/C4EE04016C
31. Ko, J. M.; Min, B. G.; Kim, D. W.; Ryu, K. S.; Kim, K. M.; Lee, Y. G.; Chang, S. H. Thin-film Type Li-ion Battery, Using a Polyethylene Separator Grafted with Glycidyl Methacrylate Electrochim. Acta 2004, 50 (2-3) 367-370 10.1016/j.electacta.2004.01.127
32. Dey, A. N.; Sullivan, B. P. Electrochemical Decomposition of Propylene Carbonate on Graphite J. Electrochem. Soc. 1970, 117 (2) 222-224 10.1149/1.2407470
33. He, Y.; Yu, X. Q.; Wang, Y. H.; Li, H.; Huang, X. J. Alumina-Coated Patterned Amorphous Silicon as the Anode for a Lithium-Ion Battery with High Coulombic Efficiency Adv. Mater. 2011, 23 (42) 4938-4941 10.1002/adma.201102568
34. Cho, T. H.; Tanaka, M.; Onishi, H.; Kondo, Y.; Nakamura, T.; Yamazaki, H.; Tanase, S.; Sakai, T. Battery Performances and Thermal Stability of Polyacrylonitrile Nano-fiber-based Nonwoven Separators for Li-ion Battery J. Power Sources 2008, 181 (1) 155-160 10.1016/j.jpowsour.2008.03.010
35. Lee, T.; Lee, Y.; Ryou, M. H.; Lee, Y. M. A Facile Approach to Prepare Biomimetic Composite Separators Toward Safety-enhanced Lithium Secondary Batteries RSC Adv. 2015, 5 (49) 39392-39398 10.1039/C5RA01061F
36. Chen, Z. H.; Zhang, L. Z.; West, R.; Amine, K. Gel Electrolyte for Lithium-ion Batteries Electrochim. Acta 2008, 53 (8) 3262-3266 10.1016/j.electacta.2007.10.058
37. Jeong, Y. B.; Kim, D. W. Effect of Thickness of Coating Layer on Polymer-coated Separator on Cycling Performance of Lithium-ion Polymer Cells J. Power Sources 2004, 128 (2) 256-262 10.1016/j.jpowsour.2003.09.073
38. Kim, B. G.; Lee, J. N.; Lee, D. J.; Park, J. K.; Choi, J. W. Robust Cycling of LiO2 Batteries through the Synergistic Effect of Blended Electrolytes ChemSusChem 2013, 6 (3) 443-448 10.1002/cssc.201200801