Lithium orthosilicate for CO2 capture with high regeneration capacity: Kinetic study and modeling of carbonation and decarbonation reactions

Chemical Engineering Journal

Volumn 283, Issue , 2016, Pages 388-396

  Amorim, Suélen M ^a   Domenico, Michele D ^a   Dantas, Tirzhá L P ^b   José, Humberto J ^a   Moreira, Regina F P M ^a  

^a FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

^b FEDERAL UNIVERSITY OF PARANÁ   (Brazil)

Author keywords

CO2 capture; Kinetic parameters; Lithium orthosilicate; Shrinking core model

Indexed keywords

ATMOSPHERIC PRESSURE; CARBON DIOXIDE; CARBONATION; ISOTHERMS; KINETIC PARAMETERS; KINETICS; REACTION RATES; SHRINKAGE; SILICON COMPOUNDS;

CARBONATION REACTIONS; CO2 CAPTURE; INCREASING TEMPERATURES; LITHIUM ORTHOSILICATE; NON-ISOTHERMAL CONDITION; POTENTIAL MATERIALS; REGENERATION CAPACITY; SHRINKING CORE MODEL;

LITHIUM COMPOUNDS;

EID: 84938888530     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2015.07.083     Document Type: Article

References (41)

1. Halabi M.H., de Croon M.H.J.M., van der Schaaf J., Cobden P.D., Schouten J.C. Reactor modeling of sorption-enhanced autothermal reforming of methane. Part I. Performance study of hydrotalcite and lithium zirconate-based processes. Chem. Eng. J. 2011, 168:872-882.
2. Mayorga S.G., Hufton J.R., Gaffney T.R. Sorption Enhanced Reaction Process for Production of Hydrogen. Phase I Final Report, Washington, DC 1997.
3. Hufton J.R., Mayorga S., Sircar S. Sorption-enhanced reaction process for hydrogen production. AIChE J. 1999, 45:248-256.
4. Oliveira E.L.G., Grande C.A., Rodrigues A.E. Effect of catalyst activity in SMR-SERP for hydrogen production: commercial vs. large-pore catalyst. Chem. Eng. Sci. 2011, 66:342-354.
5. Chanburanasiri N., Ribeiro A.M., Rodrigues A.E., Arpornwichanop A., Laosiripojana N., Praserthdam P., et al. Hydrogen production via sorption enhanced steam methane reforming process using Ni/CaO multifunctional catalyst. Ind. Eng. Chem. Res. 2011, 50:13662-13671.
6. Lopez A., Ortiz D.P. Harrison, hydrogen production using sorption-enhanced reaction. Ind. Eng. Chem. Res. 2001, 40:5102-5109.
7. 2 sorption on hydrotalcite and alkali-modified (K and Cs) hydrotalcites at high temperatures. Sep. Purif. Technol. 2008, 62:137-147.
8. 2 uptake. Can. J. Chem. Eng. 2012, 90:1514-1526.
9. 2 capture in sorption enhanced reactions. Chem. Eng. Technol. 2013, 36:567-574.
10. 2 absorbents using lithium-containing oxide. Int. J. Appl. Ceram. Technol. 2005, 2:467-475.
11. 2 absorbent using lithium-containing oxides. Proc. 2nd Annu. Conf. Carbon Sequestration, Alexandria 2003, 6.
12. 7: experimental and modeling studies. Ind. Eng. Chem. Res. 2010, 49:6593-6598.
13. 2 capture-and-release cycles. Chem. Eng. Sci. 2009, 64:187-191.
14. 3. Chem. Eng. J. 2002, 90:303-306.
15. Yong Z., Mata V., Rodrigues A. Adsorption of carbon dioxide at high temperature - a review. Sep. Purif. Technol. 2002, 26:195-205.
16. 2 chemisorption on lithium ceramics using thermal analysis. J. Therm. Anal. Calorim. 2012, 108:647-655.
17. 2 absorption. J. Phys. Chem. A 2009, 113:6919-6923.
18. 4: study of the particle size effect. Ind. Eng. Chem. Res. 2007, 46:2407-2412.
19. 4 based sorbents: Study of the used silica and doping method effects. Int. J. Greenh. Gas Control. 2011, 5:741-748.
20. 2 on lithium-based sorbents from rice husk ash. J. Hazard. Mater. 2011, 189:301-307.
21. 4: effect of surface modification by the ball milling process. Thermochim. Acta 2013, 567:118-124.
22. 2 capture with a novel solid fluidizable sorbent: thermodynamics and temperature programmed carbonation-decarbonation. Chem. Eng. J. 2013, 232:139-148.
23. 4. AIChE J. 2012, 59:901-911.
24. 4. Int. J. Hydrogen Energy 2014, 39:16656-16666.
25. 4) 2013, Federal University of Santa Catarina.
26. 4 by using different gas flow rates and particle sizes. J. Phys. Chem. A 2010, 114:4535-4541.
27. 2 capture. Energy Convers. Manage. 2014, 81:447-454.
28. 2 sorption properties of pure and modified lithium zirconate. Sep. Purif. Technol. 2004, 36:41-51.
29. 2 using lithium zirconate based sorbents. Ind. Eng. Chem. Res. 2007, 46:6696-6706.
30. 3 solid absorbent. Int. J. Hydrogen Energy 2013, 38:2557-2564.
31. Levenspiel O. Chemical Reaction Engineering 1999, John Wiley & Sons, New York.
32. 4). Thermochim. Acta 2011, 515:73-78.
33. Pfeiffer H., Bosch P., Bulbulian S. Synthesis of lithium silicates. J. Nucl. Mater. 1998, 257:309-317.
34. Xiong R., Ida J., Lin Y.S. Kinetics of carbon dioxide sorption on potassium-doped lithium zirconate. Chem. Eng. Sci. 2003, 58:4377-4385.
35. 3-CaO solar thermochemical cycle. Chem. Eng. J. 2007, 129:75-83.
36. Perry D.L. Handbook of Inorganic Compounds 2011, Taylor & Francis. second ed.
37. Radfarnia H.R., Iliuta M.C. Surfactant-template/ultrasound-assisted method for the preparation of porous nanoparticle lithium zirconate. Ind. Eng. Chem. Res. 2011, 50:9295-9305.
38. 2 capture. Ceram. Int. 2013, 39:5437-5441.
39. 4). Ind. Eng. Chem. Res. 2012, 51:2622-2630.
40. Somiya S., Aldinger F., Claussen N., Spriggs R.M., Uchino K., Koumoto K., et al. Handbook of Advanced Ceramics 2003, Elsevier, pp. 187-264.
41. Fogler H.S. Elements of Chemical Reaction Engineering 1992, Prentice Hall, New Jersey.