Distributed cracking mechanisms in textile-reinforced concrete under high speed tensile tests

Materials and Structures/Materiaux et Constructions

Volumn 49, Issue 7, 2016, Pages 2781-2798

  Yao, Y ^a   Bonakdar, A ^b   Faber, J ^c   Gries, T ^c   Mobasher, B ^a  

^a Arizona State University   (United States)

^b EUCLID CHEMICAL COMPANY   (United States)

^c RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

Digital image correlation (DIC); Finite difference method; High speed tensile testing; Interface; Non uniform strain distribution; Temperature; Textile reinforced concrete (TRC)

Indexed keywords

CONCRETE TESTING; CONCRETES; CRACKS; FINITE DIFFERENCE METHOD; GLASS; IMAGE ANALYSIS; INTERFACES (MATERIALS); LAMINATED COMPOSITES; POLYPROPYLENES; REINFORCED CONCRETE; STIFFNESS; STRAIN; STRAIN MEASUREMENT; TEMPERATURE; TENSILE STRENGTH; TENSILE TESTING; TEXTILES; WEAVING;

D. DIGITAL IMAGE CORRELATION (DIC); FINITE DIFFERENCE MODEL; HIGH SPEED TENSILE TESTING; HIGH SPEED TENSILE TESTS; INTERFACIAL BOND STRENGTH; NON-UNIFORM DISTRIBUTION; NON-UNIFORM STRAIN; TEXTILE REINFORCED CONCRETES;

STRAIN RATE;

EID: 84938534851     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-015-0685-4     Document Type: Article

References (46)

1. Gupta P, Banthia N (2000) Fiber reinforced wet-mix shotcrete under impact. J Mater Civ Eng 12(1):81–90
2. Banthia N, Bindiganavile V, Mindess S (2004) Impact blast protection with fiber reinforced concrete. In: Proceedings of RILEM conference on fiber reinforced concrete, BEFIB, pp 31–44
3. Meyers MA (1994) Dynamic behavior of materials. Wiley, New York
4. Nicholas T (1981) Tensile testing of material at high rates of strain. Exp Mech 21:177–185
5. Kenneth GH (1966) Influence of strain rate on mechanical properties of 6061.T6 aluminum under uniaxial and biaxial states of stress. Exp Mech 6(4):204–211
6. Zabotkin K, O’Toole B, Trabia M (2003) Identification of the Dynamic Properties of Materials under Moderate Strain Rates. In: Proceedings of 16th ASCE engineering mechanics conference, Seattle, WA
7. Bruce DM, Matlock DK, Speer JG, De, AK (2004) Assessment of the strain-rate dependent tensile properties of automotive sheet steels. SAE, 0507
8. Xiao XR (2008) Dynamic tensile testing of plastic materials. Polym Test 27:164–178
9. Fitoussi J, Meraghni F, Jendli Z, Hug G, Baptiste D (2005) Experimental methodology for high strain rates tensile behavior analysis of polymer matrix composites. Compos Sci Technol 65:2174–2188
10. Mechtcherine V, Silva FA, Butler M, Zhu D, Mobasher B, Gao S, Mäder E (2011) Behaviour of strain-hardening cement-based composites under high strain rates. J Adv Concr Technol 9(1):51–62
11. Pinnell M, Hill S (2008) Assessment of techniques used to measure strain during high rate tensile testing of polymeric materials. SAE Technical Paper 2008-01-1338. doi:10.4271/2008-01-1338
12. Yan B, Kuriyama Y, Uenishi A, Cornette D, Borsutzki M, Wong C (2006) Recommended practice for dynamic testing for sheet steels—development and round robin tests. SAE Technical Paper 2006-01-0120. doi:10.4271/2006-01-0120
13. ISO (2003) Plastics—determination of tensile properties at high strain rates. A draft of ISO/CD 18872
14. Bharatkumar BH, Shah, SP (2004) Impact resistance of hybrid fiber reinforced mortar. In: International RILEM symposium on concrete science and engineering: a tribute to Arnon Bentur, e-ISBN: 2912143926, RILEM Publication SARL
15. Dey V, Bonakdar A, Mobasher B (2014) Low-velocity flexural impact response of fiber-reinforced aerated concrete. Cem Concr Compos 49:100–110
16. Peled A, Mobasher B (2007) Tensile behavior of fabric cement-based composites: pultruded and cast. J Mater Civ Eng 19(4):340–348
17. Kruger M, Ozbolt J, Reinhardt HW (2003) A new 3D discrete bond model to study the influence of bond on structural performance of thin reinforced and prestressed concrete plates. In: Proceedings of high performance fiber reinforced cement composites (HPFRCC4), RILEM, Ann Arbor, MI, pp 49–63
18. Zhu D, Gencoglu M, Mobasher B (2009) Low velocity impact behavior of ar glass fabric reinforced cement composites in flexure. Cem Concr Compos 31(6):379–387
19. Bhat PS, Chang V, Li M (2014) Effect of elevated temperature on strain-hardening engineered cementitious composites. Constr Build Mater 69:370–380
20. Silva FA, Butler M, Hempel S, Toledo RD, Mechtcherine V (2014) Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete. Cem Concr Compos 48:26–34
21. Krüger M, Reinhardt HW. (2006) In: Wolfgang Brameshuber, editor. Fire resistance. Report 36: textile reinforced concrete—state-of-the-art report of RILEM technical committee 201-TRC. Bagneux: Rilem publications S.A.R.L, chap. 6, pp 83–218
22. Zhu D, Peled A, Mobasher B (2011) Dynamic tensile testing of fabric–cement composites. Constr Build Mater 25:385–395
23. Sutton MA, Wolters WJ, Peters WH, Ranson WF, McNeil SR (1983) Determination of displacements using an improved digital correlation method. Image Vis Comput 1(3):133–139. doi:10.1016/0262-8856(83)90064-1
24. Bruck HA, McNeil SR, Sutton MA, Peters WH (1989) Digital image correlation using Newton–Raphson method of partial differential correction. Exp Mech 29(3):261–267. doi:10.1007/BF02321405
25. Destrebecq JF, Toussaint E, Ferrier E (2011) Analysis of cracks and deformations in a full scale reinforced concrete beam using a digital image correlation technique. Exp Mech 51(6):879–890
26. Shah SG, Kishen JMC (2011) Fracture properties of concrete–concrete interfaces using digital image correlation. Exp Mech 51(3):303–313
27. Koerber H, Xavier J, Camanho PP (2010) High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation. Mech Mater 42:1004–1019. doi:10.1016/j.mechmat.2010.09.003
28. Gao G, Huang S, Xia K, Li Z (2015) Application of digital image correlation (DIC) in dynamic notched semi-circular bend (NSCB) tests. Exp Mech 55:95–104. doi:10.1007/s11340-014-9863-5
29. Silva FA, Zhu D, Mobasher B, Soranakom C, Toledo RD (2010) High speed tensile behavior of sisal fiber cement composites. Maters Sci Eng A Struct 527(3):544–552
30. Peled A, Sueki S, Mobasher B (2006) Bonding in fabric-cement systems: effects of fabrication methods. Cem Concr Res 36(9):1661–1671
31. Peled A, Cohen Z, Pasder Y, Roye A, Gries T (2008) Influences of textile characteristics on the tensile properties of warp knitted cement based composites. Cem Concr Compos 30(3):174–183
32. Peled A, Mobasher B, Cohen Z (2009) Mechanical properties of hybrid fabrics in pultruded cement composites. Cem Concr Compos 31(9):647–657
33. Silva FA, Butler M, Mechtcherine V, Zhu D, Mobasher B (2010) Strain rate effect on the tensile behavior of textile-reinforced concrete under static and dynamic loading. Mat Sci Eng A 528:1727–1734. doi:10.1016/j.msea.2010.11.014
34. Zhu D, Mobasher B, Rajan S (2011) Dynamic tensile testing of Kevlar 49 fabrics. J Mater Civ Eng 23(3):230–239
35. Kravaev P, Janetzko S, Gries T, Kang B, Brameshuber W, Zell M, Hegger J (2009) Commingling yarns for reinforcement of concrete. In: 4th colloquium on textile reinforced structures (CTRS4)
36. Peled A, Mobasher B (2006) Properties of fabric–cement composites made by pultrusion. Mater Struct 39(8):787–797
37. Correlated Solutions Inc. (2009) VIC-2D Reference manual. http://www.correlatedsolutions.com/installs/Vic-2D-2009-Manual.pdf
38. Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol. doi:10.1088/0957-0233/20/6/062001
39. Ferreira T, Rasband W (2012) ImageJ User Guide, IJ 1.46r Revised edition. http://imagej.nih.gov/ij/docs/guide/user-guide.pdf
40. Soranakom C, Mobasher B (2010) Modeling of tension stiffening in reinforced cement composites: part I— theoretical modeling. Mater Struct 43:1217–1230
41. Cohen Z, Peled A (2010) Controlled telescopic reinforcement system of fabric–cement composites—durability concerns. Cem Concr Res 40:1495–1506. doi:10.1016/j.cemconres.2010.06.003
42. Banholzer B, Brockmann T, Brameshuber W (2006) Material and bonding characteristics for dimensioning and modeling of textile reinforced concrete (TRC) elements. Mater Struct 39:749–763. doi:10.1617/s11527-006-9140-x
43. Soranakom C, Mobasher B (2008) Geometrical and mechanical aspects of fabric bonding and pullout in cement composites. Mater Struct 42:765–777
44. Portala N, Perezb I, Thranec L, Lundgrena K (2014) Pull-out of textile reinforcement in concrete. Constr Build Mater 71:63–71. doi:10.1016/j.conbuildmat.2014.08.01
45. Tuyan M, Yazıcı H (2012) Pull-out behavior of single steel fiber from SIFCON matrix. Constr Build Mater 35:571–577. doi:10.1016/j.conbuildmat.2012.04.110
46. Sueki S, Soranakom C, Mobasher B, Peled A (2007) Pullout-slip response of fabrics embedded in a cement paste matrix. J Mater Civ Eng 19(9):718–727. doi:10.1061/(ASCE)0899-1561(2007)19:9(718)