High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation

Mechanics of Materials

Volumn 42, Issue 11, 2010, Pages 1004-1019

  Koerber, H ^a   Xavier, J ^b   Camanho, P P ^a  

^a UNIVERSITY OF PORTO   (Portugal)

^b UNIVERSITY OF TRÁS OS MONTES AND ALTO DOURO   (Portugal)

Author keywords

Composite materials; Digital image correlation; Fracture; Multi axial loading; Strain rate effects; Yield

Indexed keywords

CARBON-EPOXY; CHARACTERISATION; COMBINED LOADING; CONSTANT STRAIN RATE; DIGITAL IMAGE CORRELATIONS; DYNAMIC EQUILIBRIA; DYNAMIC TESTS; EXPERIMENTAL INVESTIGATIONS; FAILURE CRITERIA; FAILURE ENVELOPE; FAILURE PROCESS; FRACTURE ANGLE; HIGH STRAIN RATES; IN-PLANE SHEAR; IN-PLANE SHEAR PROPERTIES; IN-PLANE STRAINS; MATRIX COMPRESSION; MULTI-AXIAL LOADINGS; OFF-AXIS; POLYMER-BASED COMPOSITE MATERIALS; PULSE-SHAPING; QUASI-STATIC; SPLIT HOPKINSON PRESSURE BARS; STRAIN RATE EFFECT; STRAIN RATE EFFECTS; TRANSVERSE COMPRESSION; ULTIMATE STRENGTH; YIELD;

AXIAL LOADS; COMPOSITE MATERIALS; CORRELATION METHODS; FRACTURE; IMAGE ANALYSIS; LOADING; STRAIN MEASUREMENT; TESTING;

STRAIN RATE;

EID: 78049316794     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2010.09.003     Document Type: Article

References (28)

1. ASTM D 695-02a, 2002. Standard test method for compressive properties of rigid plastics. ASTM. West Conshohocken PA, USA.
2. ASTM D 3410/D 3410M-03, 2003. Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading. ASTM. West Conshohocken PA, USA.
3. Catalanotti, G., 2010. Multi-material joints for high-speed train structures. PhD Thesis, University of Porto, Faculty of Engineering.
4. I.M. Daniel, J.J. Luo, P.M. Schubel, and B.T. Werner Interfiber/ interlaminar failure of composites under multi-axial states of stress Compos. Sci. Technol. 69 2009 764 771
5. C.G. Dávila, P.P. Camanho, and C.A. Rose Failure criteria for FRP laminates J. Compos. Mater. 39 2005 323 345
6. B.A. Gama, S.L. Lopatnikov, and J.W. Gillespie Hopkinson bar experimental technique: a critical review Appl. Mech. Rev. 57 2004 223 250
7. R. Gerlach, C.R. Siviour, N. Petrinic, and J. Wiegand Experimental characterisation and constitutive modelling of RTM-6 resin under impact loading Polymer 49 2008 2728 2737
8. A. Gilat, T.E. Schmidt, and A.L. Walker Full field strain measurement in compression and tensile split-Hopkinson bar experiments Exp. Mech. 49 2009 291 302
9. Gray III, G.T., 2000. Classic split-Hopkinson pressure bar testing. In: ASM Handbook, vol. 8, Mechanical Testing and Evaluation. ASM Int., Materials Park OH, pp. 462-476.
10. M.V. Hosur, J. Alexander, U.K. Vaidya, and S. Jeelani High strain rate compression response of carbon/epoxy laminate composites Compos. Struct. 52 2001 405 417
11. H.M. Hsiao, I.M. Daniel, and R.D. Cordes Strain rate effects on the transverse compressive and shear behavior of unidirectional composites J. Compos. Mater. 33 17 1999 1620 1642
12. M. Kawai, and S. Saito Off-axis strength differential effects in unidirectional carbon/epoxy laminates at different strain rates and predictions of associated failure envelopes Compos. Part A. 40 2009 1632 1649
13. H. Koerber, and P.P. Camanho Characterisation of unidirectional Carbon-Epoxy IM7-8552 in longitudinal compression under high strain rates DYMAT 2009 185 191 10.1051/dymat/2009025
14. H. Kolsky An investigation of the mechanical properties of materials at very high rates of loading Proc. Phys. Soc. London, Sect. B. 62 II-B 1949 676 700
15. D. Lee, H. Tippur, and P. Bogert Quasi-static and dynamic fracture of graphite/epoxy composites: an optical study of loading-rate effects Compos. Part B 41 2010 462 474
16. J.M. Lifshitz, and H. Leber Data processing in the split Hopkinson pressure bar tests Int. J. Impact Eng. 15 6 1994 723 733
17. S. Nemat-Nasser, J.B. Isaacs, and J.E. Starret Hopkinson techniques for dynamic recovery experiments Proc. R. Soc. London, Ser. A. 435 1991 371 391
18. L. Ninan, J. Tsai, and C.T. Sun Use of split Hopkinson pressure bar for testing off-axis composites Int. J. Impact Eng. 25 2001 291 313
19. B. Pan, K. Qian, H. Xie, and A. Asundi Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review Meas. Sci. Technol. 20 2009 062001 17pp
20. A. Puck, and H. Schürmann Failure analysis of FRP laminates by means of physically based phenomenological models Compos. Sci. Technol. 58 1998 1045 1067
21. P.D. Soden, M.J. Hinton, and A.S. Kaddour Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data Compos. Sci. Technol. 62 2002 1489 1514
22. Subhash, G., Ravichandran, G., 2000. Split-Hopkinson pressure bar testing of ceramics. In: ASM Handbook, vol 8, Mechanical Testing and Evaluation. ASM Int., Materials Park OH, pp. 488-496.
23. M.A. Sutton Advances in two-dimensional and three-dimensional computer vision Photomechanics. Top. Appl. Phys. 1999 323 372
24. J.L. Tsai, and C.T. Sun Strain rate effect on in-plane shear strength of unidirectional polymeric composites Compos. Sci. Technol. 65 2005 1941 1947
25. T.J. Vogler, and S. Kyriakides Inelastic behavior of an AS4/PEEK composite under combined transverse compression and shear Part I: Exp. Int. J. Plast. 15 1999 783 806
26. M. Vural, and G. Ravichandran Transverse failure in thick S2-glass/epoxy fiber-reinforced composites J. Compos. Mater. 38 7 2004 609 623
27. Wiegand, J., 2008. Constitutive modelling of composite materials under impact loading. PhD Thesis, University of Oxford, Department of Engineering Science.
28. H. Zhao, and G. Gary On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains Int. J. Solids Struct. 33 23 1996 3363 3375