Application of fuzzy analytic network process for barrier evaluation in automotive parts remanufacturing towards cleaner production - A study in an Indian scenario

Journal of Cleaner Production

Volumn 114, Issue , 2016, Pages 199-213

  Govindan, Kannan ^a   Madan Shankar, K ^b   Kannan, Devika ^a  

^a UNIVERSITY OF SOUTHERN DENMARK   (Denmark)

^b EEE Department   (India)

Author keywords

Automotive parts; Cleaner production; Emerging economies; Fuzzy ANP; Indian remanufacturing; ISM

Indexed keywords

AMPHIBIOUS VEHICLES; AUTOMOBILES; AUTOMOTIVE INDUSTRY; CONSERVATION; DECISION THEORY; DEVELOPING COUNTRIES; FUZZY LOGIC; POLLUTION CONTROL; SUPPLY CHAINS;

AUTOMOTIVE PARTS; CLEANER PRODUCTION; EMERGING ECONOMIES; FUZZY ANP; INDIAN REMANUFACTURING; ISM;

LINEAR MATRIX INEQUALITIES;

EID: 84938118040     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2015.06.092     Document Type: Article

References (110)

1. J. Amaya, P. Zwolinski, and D. Brissaud Environmental benefits of parts remanufacturing: the truck injector case 17th CIRP International Conference on Life Cycle Engineering Proceedings 2010
2. L. Amelia, D.A. Wahab, C.H. Che Haron, N. Muhamad, and C.H. Azhari Initiating automotive component reuse in Malaysia J. Clean. Prod. 17 17 2009 1572 1579
3. M.K. Andrew, S. Burges, W. Ijomah, and C. McMahon Reducing waste: repair, Recondition, remanufacture or recycle? Sustain. Dev. 14 4 2006 257 267
4. APRA Automotive Parts Rebuilders Remanufacturers Association 2010 APRA http://www.apra.org/About/Reman.asp (accessed on 28.01.14.)
5. S. Barker, and A. King Organizing reuse managing the process of design for remanufacture (DFR) POMS 18th 2007
6. A. Baykasoʇlu, and I. Gölcük Development of a novel multiple-attribute decision making model via fuzzy cognitive maps and hierarchical fuzzy TOPSIS Inf. Sci. 301 2015 75 98
7. S. Bernard Remanufacturing J. Environ. Econ. Manag. 62 3 2011 337 351
8. M. Bouzon, K. Govindan, and C.M.T. Rodriguez Reducing the extraction of minerals: reverse logistics in the machinery manufacturing industry sector in Brazil using ISM approach Resour. Policy 2015 in press, http://dx.doi.org/10.1016/j.resourpol.2015.02.001 (accessed on 20.03.15.)
9. M. Bouzon, K. Govindan, and C.M.T. Rodriguez Reverse Logistics Barriers: an Analysis Using Interpretive Structural Modeling. In Enhancing Synergies in a Collaborative Environment 2015 Springer International Publishing 95 103
10. Business Standard Law to make producers responsible for e-waste http://www.businessstandard.com/india/news/law-to-make-producersresponsible- for-e-waste/379656/ 2009 (accessed on 15.02.14.)
11. P. Chatterjee, and S. Chakraborty Advanced manufacturing systems selection using ORESTE method Int. J. Adv. Oper. Manag. 5 4 2013 337 361
12. A. Chaudhary, and I. Uprety Evaluation and precedence of factors affects telecom service quality by AHP and fuzzy analysis Int. J. Adv. Oper. Manag. 7 1 2015 22 40
13. M. Chen End-of-life vehicle recycling in China: now and the future JOM 57 10 2005 20 26
14. M. Chen, and F. Zhang End-of-life vehicle recovery in China: consideration and innovation following the EU ELV directive JOM 61 3 2009 45 52
15. N. Choudhary, N.K. Singh, V.O. Oladokun, O.E. Charles-Owaba, T.M.C. Nzeribe, H.A.O. Lihua, and et al. Remanufacturing in India: approaches, potentials & technical challenges Int. J. Ind. Eng. Technol. 3 3 2011 223 227
16. T. Clottey, and W.C. Benton Core Acquisitions Planning in the Automotive Parts Remanufacturing Industry 2010
17. F.M. de Mendonça, C.E.D.D.C. Infante, R.D.A.B. do Valle, and E.C. Miguez Model of reverse logistics by means of a logistics operator Int. J. Bus. Perform. Supply Chain Model. 6 2 2014 150 167
18. A. Diabat, and K. Govindan An analysis of the drivers affecting the implementation of green supply chain management Resour. Conserv. Recycl. 55 6 2011 659 667
19. Y. Dou, and J. Sarkis A joint location and outsourcing sustainability analysis for a strategic offshoring decision. Int J. Prod. Res. 48 2 2010 567 592
20. Y. Dou, Q. Zhu, and J. Sarkis Evaluating green supplier development programs with a grey-analytical network process-based methodology Eur. J. Oper. Res. 233 2 2014 420 431
21. J.C. Duperrin, and M. Godet Methode De HierarChization Des Elements D'um System 676 Rapport Economique De CEA, R-45-51, Paris 1973
22. R.F. Dyer, and E.H. Forman Group decision support with the analytic hierarchy process Decis. Support Syst. 8 2 1992 99 124
23. L.M. Ellram The use of the case study method in logistics research J. Bus. Logist. 17 2 1996 93
24. G. Ferrer The economics of tire remanufacturing Resour. Conserv. Recycl. 19 4 1997 221 255
25. G. Ferrer, and R.U. Ayres The impact of remanufacturing in the economy Ecol. Econ. 32 3 2000 413 429
26. G. Ferrer, and D. Clay Whybark From garbage to goods: successful remanufacturing systems and skills Bus. Horiz. 43 6 2000 55 64
27. G. Ferrer, and J.M. Swaminathan Managing new and remanufactured products Manag. Sci. 52 1 2006 15 26
28. J. Gaur, M. Amini, P. Banerjee, and R. Gupta Drivers of consumer purchase intentions for remanufactured products: a study of Indian consumers relocated to the USA Qual. Mark. Res. Int. J. 18 1 2015
29. C. Gencer, and D. Gürpinar Analytic network process in supplier selection: a case study in an electronic firm Appl. Math. Model. 31 11 2007 2475 2486
30. J. Gerrard, and M. Kandlikar Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of the ELV Directive on 'green' innovation and vehicle recovery J. Clean. Prod. 15 1 2007 17 27
31. K. Govindan, J. Sarkis, C.J. Chiappetta Jabbour, Q. Zhu, and Y. Geng Eco-efficiency based green supply chain management: current status and opportunities Eur. J. Oper. Res. 2014 293 298
32. K. Govindan, D. Kannan, and K.M. Shankar Evaluating the drivers of corporate social responsibility in the mining industry with multi-criteria approach: a multi-stakeholder perspective J. Clean. Prod. 84 2014 214 232
33. K. Govindan, A. Diabat, and K. Madan Shankar Analyzing the drivers of green manufacturing with fuzzy approach J. Clean. Prod. 96 2015 182 193
34. K. Govindan, M. Palaniappan, Q. Zhu, and D. Kannan Analysis of third party reverse logistics provider using interpretive structural modeling Int. J. Prod. Econ. 140 1 2012 204 211
35. K. Govindan, J. Sarkis, and P. Murugesan An ANP based multi criteria decision making model for third-party reverse logistics provider selection in a reverse supply chain Int. J. Adv. Manuf. Technol. 68 1 2013 863 880
36. V.D.R. Guide Jr. Production planning and control for remanufacturing: industry practice and research needs J. Oper. Manag. 18 4 2000 467 483
37. A. Gunasekaran, C.J.C. Jabbour, and A.B.L.D.S. Jabbour Managing organizations for sustainable development in emerging countries: an introduction Int. J. Sustain. Dev. World Ecol. 21 3 2014 195 197
38. R. Hammond, T. Amezquita, and B. Bras Issues in the automotive parts remanufacturing industry: a discussion of results from surveys performed among remanufacturers Eng. Des. Autom. 4 1998 27 46
39. W.L. Ijomah A Model-based Definition of the Generic Remanufacturing Business Process 2002
40. W.L. Ijomah, C.A. McMahon, G.P. Hammond, and S.T. Newman Development of design for remanufacturing guidelines to support sustainable manufacturing Robot. Comput.-Integr. Manuf. 23 6 2007 712 719
41. C.J.C. Jabbour, and J.A. Puppim-de-Oliveira Barriers to environmental management in clusters of small businesses in Brazil and Japan: from a lack of knowledge to a decline in traditional knowledge Int. J. Sustain. Dev. World Ecol. 19 3 2012 247 257
42. S. Jharkharia, and R. Shankar Selection of logistics service provider: an analytic network process (ANP) approach Omega 35 3 2007 274 289
43. A. Jindal, and K.S. Sangwan Development of an interpretive structural model of drivers for reverse logistics implementation in Indian industry Int. J. Bus. Perform. Supply Chain Model. 5 4 2013 325 342
44. G. Kannan, and A.N. Haq Analysis of interactions of criteria and sub-criteria for the selection of supplier in the built-in-order supply chain environment Int. J. Prod. Res. 45 17 2007 3831 3852
45. G. Kannan, A. Noorul Haq, and M. Devika Analysis of closed loop supply chain using genetic algorithm and particle swarm optimisation Int. J. Prod. Res. 47 5 2009 1175 1200
46. G. Kannan, P. Sasikumar, and K. Devika A genetic algorithm approach for solving a closed loop supply chain model: a case of battery recycling Appl. Math. Model. 34 3 2010 655 670
47. D. Kannan, A. Diabat, and K.M. Shankar Analyzing the drivers of end-of-life tire management using interpretive structural modeling (ISM) Int. J. Adv. Manuf. Technol. 72 9-12 2014 1603 1614
48. G.P. Kiesmüller, and E.A. Van der Laan An inventory model with dependent product demands and returns Int. J. Prod. Econ. 72 1 2001 73 87
49. H.-J. Kim, V. Raichur, and S.J. Skerlos Economic and environmental assessment of automotive remanufacturing alternator case study Proceedings of the 2008 International Manufacturing Science and Engineering Conference 2008, October 7-10, 2008, Illinois, USA 2008
50. K.H. Kim, H.T. Joung, H. Nam, Y.C. Seo, J. Hee Hong, and T.W. Yoo J.H. Park Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea Waste Manag. 24 6 2004 533 540
51. A.M. King, and S.C. Burgess The development of a remanufacturing platform design: a strategic response to the Directive on Waste Electrical and Electronic Equipment Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 219 8 2005 623 631
52. D.T. Kumar, M. Palaniappan, D. Kannan, and K.M. Shankar Analyzing the CSR issues behind the supplier selection process using ISM approach Resour. Conserv. Recycl. 92 2014 268 278
53. C.K. Kwong, and H. Bai A fuzzy AHP approach to the determination of importance weights of customer requirements in quality function deployment J. Intell. Manuf. 13 5 2002 367 377
54. C. Lattemann, M. Fetscherin, I. Alon, S. Li, and A.M. Schneider CSR communication intensity in Chinese and Indian multinational companies Corp. Gov. Int. Rev. 17 4 2009 426 442
55. B. Lebreton, and A. Tuma A quantitative approach to assessing the profitability of car and truck tire remanufacturing Int. J. Prod. Econ. 104 2 2006 639 652
56. S.K. Liao, and K.L. Chang Measure performance of hospitals using analytic network process (ANP) Int. J. Bus. Perform. Supply Chain Model. 1 2-3 2009 129 143
57. R.T. Lund Remanufacturing, United States Experience and Implications for Developing Nations 1983 Center for Policy Alternatives, Massachusetts Institute of Technology
58. R.T. Lund Remanufacturing Technol. Rev. 87 2 1984 18
59. R.T. Lund, and F.D. Skeels Guidelines for an Original Equipment Manufacturer Starting a Remanufacturing Operation (No. DOE/CS/40192-T2) 1983 Massachusetts Inst. of Tech., Center for Policy Alternatives Cambridge (USA)
60. R.T. Lund, and F.D. Skeels Start-up Guidelines for the Independent Remanufacturer (No. DOE/CS/40192-T1) 1983 Massachusetts Inst. of Tech., Center for Policy Alternatives Cambridge (USA)
61. R.T. Lund The Remanufacturing Industry: Hidden Giant 1996 Boston University Boston, MA
62. P. Majumder, and H. Groenevelt Competition in remanufacturing Prod. Oper. Manag. 10 2 2001 125 141
63. A. Mandal, and S.G. Deshmukh Vendor selection using interpretive structural modelling (ISM) Int. J. Oper. Prod. Manage. 14 6 1994 52 59
64. K. Mukherjee, and S. Mondal Analysis of issues relating to remanufacturing technology-a case of an Indian company Technol. Anal. Strateg. Manag. 21 5 2009 639 652
65. N. Nakajima, and W.H. Vanderburg A failing grade for the German end-of-life vehicles take-back system Bull. Sci. Technol. Soc. 25 2 2005 170 186
66. P. Nigam Interpretive structural modelling (ISM) of the barriers to green supply chain management in Indian companies Int. J. Bus. Perform. Supply Chain Model. 6 2 2014 183 206
67. J.D. Nixon, P.K. Dey, S.K. Ghosh, and P.A. Davies Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process Energy 59 2013 215 223
68. V. Paramasivam, V. Senthil, and N.R. Ramasamy Decision making in equipment selection: an integrated approach with digraph and matrix approach, AHP and ANP Int. J. Adv. Manuf. Technol. 54 9-12 2011 1233 1244
69. M.N. Qureshi, P. Kumar, and D. Kumar Framework for benchmarking logistics performance using fuzzy AHP Int. J. Bus. Perform. Supply Chain Model. 1 1 2009 82 98
70. A. Rashid, F. Asif, P. Krajnik, and C.M. Nicolescu Resource conservative manufacturing: an essential change in business and technology paradigm for sustainable manufacturing J. Clean. Prod. 57 2013 166 177
71. P. Rathore, S. Kota, and A. Chakrabarti Sustainability through remanufacturing in India: a case study on mobile handsets J. Clean. Prod. 19 15 2011 1709 1722
72. M.S. Rawat, and G. Thakar Sustainability Analysis of Ageing Vehicles - An Indian Perspective 2012
73. J. Rowley Using case studies in research Manag. Res. News 25 1 2002 16 27
74. H. Rozenfeld, and A.P. Barquet A Brazilian perspective on remanufacturing 11th Global Conference on Sustainable Manufacturing 2013 http://www.gcsm.eu/Papers/27/0.2-Rozenfeld.pdf (accessed on 02.02.15.)
75. Y. Saavedra, A.P. Barquet, H. Rozenfeld, F.A. Forcellini, and A.R. Ometto Remanufacturing in Brazil: case studies on the automotive sector J. Clean. Prod. 53 2013 267 276
76. A.P. Sage Interpretive Structural Modelling: Methodology for Large-Scale Systems 1977 McGraw-Hill New York, NY 91 164
77. P. Sasikumar, G. Kannan, and A.N. Haq A multi-echelon reverse logistics network design for product recovery - a case of truck tire remanufacturing Int. J. Adv. Manuf. Technol. 49 9-12 2010 1223 1234
78. M.A. Seitz A critical assessment of motives for product recovery: the case of engine remanufacturing J. Clean. Prod. 15 11 2007 1147 1157
79. V. Sharma, S.K. Garg, and P.B. Sharma Identification of major drivers and roadblocks for remanufacturing in India J. Clean. Prod. 112 2014 1882 1892 10.1016/j.jclepro.2014.11.082 (accessed on 12.01.15.)
80. M. Sherwood, L.H. Shu, and R.G. Fenton Supporting design for remanufacture through waste-stream analysis of automotive remanufacturers CIRP Ann.-Manuf. Technol. 49 1 2000 87 90
81. R.K. Singh, H.O. Sharma, and S.K. Garg Interpretive structural modelling for selection of best supply chain practices Int. J. Bus. Perform. Supply Chain Model. 2 3-4 2010 237 257
82. S. Sipahi, and M. Timor The analytic hierarchy process and analytic network process: an overview of applications Manag. Decis. 48 5 2010 775 808
83. S. Statham Remanufacturing towards a Sustainable Future 2006 Pera International, Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University
84. R. Steinhilper Remanufacturing: the Ultimate Form of Recycling 1998 Fraunhofer-IRB-Verlag
85. R. Subramoniam, D. Huisingh, and R.B. Chinnam Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs J. Clean. Prod. 17 13 2009 1163 1174
86. X. Sun, Y. Li, K. Govindan, and Y. Zhou Integrating dynamic acquisition pricing and remanufacturing decisions under random price-sensitive returns Int. J. Adv. Manuf. Technol. 68 1-4 2013 933 947
87. E. Sundin Product and Process Design for Successful Remanufacturing 2004
88. J.W. Sutherland, D.P. Adler, K.R. Haapala, and V. Kumar A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production CIRP Ann.-Manuf. Technol. 57 1 2008 5 8
89. E. Tazaki, and M. Amagasa Structural modeling in a class of systems using fuzzy sets theory Fuzzy Sets Syst. 2 1979 87 103
90. R. Terkar, D.H. Vasudevan, and D.V. Kalamkar Enhancing productivity through cost and lead time reduction in remanufacturing Int. J. Mech. Eng. Technol (IJMET) 4 2 2013 286 297
91. K. Togawa Japan's Automotive Recycling System: Evaluation Three Years after Implementation. Promoting 3Rs in Developing Countries - Lessons from the Japanese Experience 2008 IDE
92. A. Topcu, J.C. Benneyan, and T.P. Cullinane A simulation-optimisation approach for reconfigurable inventory space planning in remanufacturing facilities Int. J. Bus. Perform. Supply Chain Model. 5 1 2013 86 114
93. D. Tranfield, D. Denyer, and P. Smart Towards a methodology for developing evidence-informed management knowledge by means of systematic review Br. J. Manag. 14 3 2003 207 222
94. M. Tyagi, P. Kumar, and D. Kumar Analysis of interactions among the drivers of green supply chain management Int. J. Bus. Perform. Supply Chain Model. 7 1 2015 92 108
95. G.H. Tzeng, and J.J. Huang Multiple Attribute Decision Making: Methods and Applications 2011 CRC Press
96. A. Van Horenbeek, and L. Pintelon Development of a maintenance performance measurement framework - using the analytic network process (ANP) for maintenance performance indicator selection Omega 42 1 2014 33 46
97. A.H. Walle Remanufacturing marketing strategies and developing countries J. Glob. Mark. 1 4 1988 75 90
98. B. Wernerfelt A resource-based view of the firm Strateg. Manag. J. 5 2 1984 171 180
99. X. Xia, K. Govindan, and Q. Zhu Analyzing internal barriers for automotive parts remanufacturers in China using grey-DEMATEL approach J. Clean. Prod. 87 2015 811 825
100. W. Xiang, and C. Ming Implementing extended producer responsibility: vehicle remanufacturing in China J. Clean. Prod. 19 6 2011 680 686
101. B.S. Xu, S.C. Liu, and H.D. Wang Developing remanufacturing engineering, constructing cycle economy and building saving-oriented society J. Cent. South Univ. Technol. 12 2 2005 1 6
102. M. Yang, and M. Chen Life cycle of remanufactured engines J. Cent. South Univ. Technol. 12 2 2005 81 85
103. R. Yin Case Study Research 1984 Sage Publications Beverly Hills, Calif.
104. R.K. Yin Case study research: design and methods Appl. Soc. Res. Methods 5 2002
105. S.H. Yin, C.C. Wang, L.Y. Teng, and Y.M. Hsing Application of DEMATEL, ISM, and ANP for key success factor (KSF) complexity analysis in RD alliance Sci. Res. Essays 7 19 2012 1872 1890
106. V.F. Yu, and K.J. Hu An integrated approach for prioritizing key factors in improving the service quality of nursing homes Math. Probl. Eng. 2013 2013 12 10.1155/2013/563723 Article ID 563723
107. H. Yüksel Design of automobile engines for remanufacture with quality function deployment Int. J. Sustain. Eng. 3 3 2010 170 180
108. H. Zhang, and M. Chen Research on the recycling industry development model for typical exterior plastic components of end-of-life passenger vehicle based on the SWOT method Waste Manag. 33 11 2013 2341 2353
109. T. Zhang, J. Chu, X. Wang, X. Liu, and P. Cui Development pattern and enhancing system of automotive components remanufacturing industry in China Resour. Conserv. Recycl. 55 6 2011 613 622
110. W. Zhang, X. Zhang, X. Fu, and Y. Liu A grey analytic network process (ANP) model to identify storm tide risk In Grey Systems and Intelligent Services, 2009. GSIS 2009. IEEE International Conference on 2009 IEEE 582 587