A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells

Nature Communications

Volumn 6, Issue , 2015, Pages

  Guo, Fei ^a   Li, Ning ^a   Fecher, Frank W ^b   Gasparini, Nicola ^a   Quiroz, Cesar Omar Ramirez ^a   Bronnbauer, Carina ^a   Hou, Yi ^a   Radmilović, Vuk V ^a,c   Radmilović, Velimir R ^a,c   Spiecker, Erdmann ^a   Forberich, Karen ^a   Brabec, Christoph J ^a,b  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^b BAVARIAN CENTER FOR APPLIED ENERGY RESEARCH ZAE BAYERN   (Germany)

^c UNIVERSITY OF BELGRADE   (Serbia)

Author keywords

[No Author keywords available]

Indexed keywords

FUEL CELL; PHOTOVOLTAIC SYSTEM; SOLAR POWER;

ARTICLE; ELECTRIC CURRENT; ELECTRIC POTENTIAL; ELECTRICAL EQUIPMENT; MULTI JUNCTION PHOTOVOLTAIC CELL;

EID: 84937596831     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms8730     Document Type: Article

References (45)

1. Shockley, W. & Queisser, H. J. Detailed balance limit of efficiency of p-n junction solar cells. J. Appl. Phys. 32, 510-519 (1961).
2. Green, M. A., Emery, K., Hishikawa, Y., Warta, W. & Dunlop, E. D. Solar cell efficiency tables (Version 45). Prog. Photovoltaics 23, 1-9 (2015).
3. Trupke, T., Green, M. A. & Wurfel, P. Improving solar cell efficiencies by up-conversion of sub-band-gap light. J. Appl. Phys. 92, 4117-4122 (2002).
4. Devos, A. Detailed balance limit of the efficiency of tandem solar-cells. J. Phys. D. Appl. Phys. 13, 839-846 (1980).
5. Trupke, T. & Wurfel, P. Improved spectral robustness of triple tandem solar cells by combined series/parallel interconnection. J. Appl. Phys. 96, 2347-2351 (2004).
6. You, J. B. et al. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat. Commun. 4, 1446 (2013).
7. Semonin, O. E. et al. Peak external photocurrent quantum efficiency exceeding 100% via MEG in a quantum dot solar cell. Science 334, 1530-1533 (2011).
8. Luque, A., Marti, A. & Nozik, A. J. Solar cells based on quantum dots: Multiple exciton generation and intermediate bands. MRS Bull. 32, 236-241 (2007).
9. Hirst, L. C. & Ekins-Daukes, N. J. Fundamental losses in solar cells. Prog. Photovoltaics 19, 286-293 (2011).
10. Hendriks, K. H., Li, W. W., Wienk, M. M. & Janssen, R. A. J. Small-bandgap semiconducting polymers with high near-infrared photoresponse. J. Am. Chem. Soc. 136, 12130-12136 (2014).
11. Ashraf, R. S. et al. Chalcogenophene comonomer comparison in small band gap diketopyrrolopyrrole-based conjugated polymers for high-performing fieldeffect transistors and organic solar cells. J. Am. Chem. Soc. 137, 1314-1321 (2015).
12. Tang, J. et al. Quantum junction solar cells. Nano Lett. 12, 4889-4894 (2012).
13. Zhao, N. et al. Colloidal PbS quantum dot solar cells with high fill factor. ACS Nano 4, 3743-3752 (2010).
14. Dennler, G. et al. Design rules for donors in bulk-heterojunction tandem solar cells-towards 15% energy-conversion efficiency. Adv. Mater. 20, 579-583 (2008).
15. Scharber, M. C. et al. Design rules for donors in bulk-heterojunction solar cells - Towards 10% energy-conversion efficiency. Adv. Mater. 18, 789-794 (2006).
16. Guo, F. et al. Solution-processed parallel tandem polymer solar cells using silver nanowires as intermediate electrode. ACS Nano 8, 12632-12640 (2014).
17. Guo, F. et al. Fully solution-processing route toward highly transparent polymer solar cells. ACS Appl. Mater. Interface 6, 18251-18257 (2014).
18. Adebanjo, O. et al. Triple junction polymer solar cells. Energy Environ. Sci. 6, 3150-3170 (2013).
19. Chen, C. C. et al. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%. Adv. Mater. 26, 5670-5677 (2014).
20. Dou, L. T. et al. Tandem polymer solar cells featuring a spectrally matched lowbandgap polymer. Nat. Photonics 6, 180-185 (2012).
21. Gevaerts, V. S., Furlan, A., Wienk, M. M., Turbiez, M. & Janssen, R. A. J. Solution processed polymer tandem solar cell using efficient small and wide bandgap polymer:fullerene blends. Adv. Mater. 24, 2130-2134 (2012).
22. Kim, J. Y. et al. Efficient tandem polymer solar cells fabricated by all-solution processing. Science 317, 222-225 (2007).
23. Li, N. et al. An efficient solution-processed intermediate layer for facilitating fabrication of organic multi-junction solar cells. Adv. Energy Mater. 3, 1597-1605 (2013).
24. Li, N. et al. Environmentally printing efficient organic tandem solar cells with high fill factors: a guideline towards 20% power conversion efficiency. Adv. Energy Mater. 4, 1400084 (2014).
25. Li, W. W., Furlan, A., Hendriks, K. H., Wienk, M. M. & Janssen, R. A. J. Efficient tandem and triple-junction polymer solar cells. J. Am. Chem. Soc. 135, 5529-5532 (2013).
26. Lee, J. Y., Connor, S. T., Cui, Y. & Peumans, P. Solution-processed metal nanowire mesh transparent electrodes. Nano Lett. 8, 689-692 (2008).
27. Leem, D. S. et al. Efficient organic solar cells with solution-processed silver nanowire electrodes. Adv. Mater. 23, 4371-4375 (2011).
28. Guo, F. et al. ITO-free and fully solution-processed semitransparent organic solar cells with high fill factors. Adv. Energy Mater. 3, 1062-1067 (2013).
29. Song, M. et al. Highly efficient and bendable organic solar cells with solutionprocessed silver nanowire electrodes. Adv. Funct. Mater. 23, 4177-4184 (2013).
30. Beiley, Z. M. et al. Semi-transparent polymer solar cells with excellent sub-bandgap transmission for third generation photovoltaics. Adv. Mater. 25, 7020-7026 (2013).
31. Sista, S., Hong, Z. R., Park, M. H., Xu, Z. & Yang, Y. High-efficiency polymer tandem solar cells with three-terminal structure. Adv. Mater. 22, E77-E80 (2010).
32. Zuo, L. J. et al. Microcavity-enhanced light-trapping for highly efficient organic parallel tandem solar cells. Adv. Mater. 26, 6778-6784 (2014).
33. Li, N. et al. Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials. Energy Environ. Sci. 6, 3407-3413 (2013).
34. Pettersson, L. A. A., Roman, L. S. & Inganas, O. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films. J. Appl. Phys. 86, 487-496 (1999).
35. Centurioni, E. Generalized matrix method for calculation of internal light energy flux in mixed coherent and incoherent multilayers. Appl. Opt. 44, 7532-7539 (2005).
36. Silvestre, S. & Chouder, A. Effects of shadowing on to photovoltaic module performance. Prog. Photovoltaics Res. Appl. 16, 141-149 (2008).
37. Hadipour, A., de Boer, B. & Blom, P. W. M. Device operation of organic tandem solar cells. Org. Electron. 9, 617-624 (2008).
38. Kojima, A., Teshima, K., Shirai, Y. & Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050-6051 (2009).
39. Green, M. A., Ho-Baillie, A. & Snaith, H. J. The emergence of perovskite solar cells. Nat. Photonics 8, 506-514 (2014).
40. Snaith, H. J. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. J. Phys. Chem. Lett. 4, 3623-3630 (2013).
41. Sun, S. Y. et al. The origin of high efficiency in low-temperature solutionprocessable bilayer organometal halide hybrid solar cells. Energy Environ. Sci. 7, 399-407 (2014).
42. Kim, T. et al. Triple-junction hybrid tandem solar cells with amorphous silicon and polymer-fullerene blends. Sci. Rep. 4, 7154 (2014).
43. Beiley, Z. M. & McGehee, M. D. Modeling low cost hybrid tandem photovoltaics with the potential for efficiencies exceeding 20%. Energy Environ. Sci. 5, 9173-9179 (2012).
44. Kim, J. et al. 10.5% efficient polymer and amorphous silicon hybrid tandem photovoltaic cell. Nat. Commun. 6, 6391 (2015).
45. Guo, F. et al. High-performance semitransparent perovskite solar cells with solution-processed silver nanowires as top electrodes. Nanoscale 7, 1642-1649 (2015).