메뉴 건너뛰기




Volumn 104, Issue , 2015, Pages 89-101

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

Author keywords

Complex proportional assessment; Crashworthiness; Multi cell hexagonal tube; Multiobjective optimization; Oblique impact

Indexed keywords

CELLS; CRASHWORTHINESS; CYTOLOGY; DECISION MAKING; ENERGY ABSORPTION; MULTIOBJECTIVE OPTIMIZATION; THIN WALLED STRUCTURES; TUBES (COMPONENTS);

EID: 84936858931     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.finel.2015.06.004     Document Type: Article
Times cited : (242)

References (59)
  • 1
    • 68949093804 scopus 로고    scopus 로고
    • Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures
    • Z. Ahmad, and D.P. Thambiratnam Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures Int. J. Crashworth. 14 2009 349 363
    • (2009) Int. J. Crashworth. , vol.14 , pp. 349-363
    • Ahmad, Z.1    Thambiratnam, D.P.2
  • 2
    • 67349173213 scopus 로고    scopus 로고
    • Crushing response of foam-filled conical tubes under quasi-static axial loading
    • Z. Ahmad, and D.P. Thambiratnam Crushing response of foam-filled conical tubes under quasi-static axial loading Mater. Des. 30 2009 2393 2403
    • (2009) Mater. Des. , vol.30 , pp. 2393-2403
    • Ahmad, Z.1    Thambiratnam, D.P.2
  • 3
    • 58149496321 scopus 로고    scopus 로고
    • Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading
    • Z. Ahmad, and D.P. Thambiratnam Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading Comput. Struct. 87 2009 186 197
    • (2009) Comput. Struct. , vol.87 , pp. 186-197
    • Ahmad, Z.1    Thambiratnam, D.P.2
  • 4
    • 84918812006 scopus 로고    scopus 로고
    • Experimental and numerical analysis of foam-filled aluminum conical tubes subjected to oblique impact loading
    • F. Mat, K.A. Ismail, S. Yaacob, and Z. Ahmad Experimental and numerical analysis of foam-filled aluminum conical tubes subjected to oblique impact loading Materialpruefung/Mater. Test. 56 2014 1001 1008
    • (2014) Materialpruefung/Mater. Test. , vol.56 , pp. 1001-1008
    • Mat, F.1    Ismail, K.A.2    Yaacob, S.3    Ahmad, Z.4
  • 5
    • 84923813997 scopus 로고    scopus 로고
    • Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets
    • X. An, Y. Gao, J. Fang, G. Sun, and Q. Li Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets Thin-Walled Struct. 91 2015 63 71
    • (2015) Thin-Walled Struct. , vol.91 , pp. 63-71
    • An, X.1    Gao, Y.2    Fang, J.3    Sun, G.4    Li, Q.5
  • 6
    • 84901982015 scopus 로고    scopus 로고
    • Parametric analysis and multiobjective optimization for functionally graded foam-filled thin-wall tube under lateral impact
    • J. Fang, Y. Gao, G. Sun, Y. Zhang, and Q. Li Parametric analysis and multiobjective optimization for functionally graded foam-filled thin-wall tube under lateral impact Comput. Mater. Sci. 90 2014 265 275
    • (2014) Comput. Mater. Sci. , vol.90 , pp. 265-275
    • Fang, J.1    Gao, Y.2    Sun, G.3    Zhang, Y.4    Li, Q.5
  • 7
    • 84875212784 scopus 로고    scopus 로고
    • Optimal design of functionally graded foam material under impact loading
    • X. Zhang, and H. Zhang Optimal design of functionally graded foam material under impact loading Int. J. Mech. Sci. 68 2013 199 211
    • (2013) Int. J. Mech. Sci. , vol.68 , pp. 199-211
    • Zhang, X.1    Zhang, H.2
  • 8
    • 75249092007 scopus 로고    scopus 로고
    • Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading
    • Z. Ahmad, D.P. Thambiratnam, and A.C.C. Tan Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading Int. J. Impact Eng. 37 2010 475 488
    • (2010) Int. J. Impact Eng. , vol.37 , pp. 475-488
    • Ahmad, Z.1    Thambiratnam, D.P.2    Tan, A.C.C.3
  • 9
    • 34249936374 scopus 로고    scopus 로고
    • A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns
    • X. Zhang, and G. Cheng A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns Int. J. Impact Eng. 34 2007 1739 1752
    • (2007) Int. J. Impact Eng. , vol.34 , pp. 1739-1752
    • Zhang, X.1    Cheng, G.2
  • 10
    • 0036533042 scopus 로고    scopus 로고
    • New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency
    • H.-S. Kim New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency Thin-Walled Struct. 40 2002 311 327
    • (2002) Thin-Walled Struct. , vol.40 , pp. 311-327
    • Kim, H.-S.1
  • 11
    • 84896969778 scopus 로고    scopus 로고
    • A study on the mean crushing strength of hexagonal multi-cell thin-walled structures
    • Z. Bai, H. Guo, B. Jiang, F. Zhu, and L. Cao A study on the mean crushing strength of hexagonal multi-cell thin-walled structures Thin-Walled Struct. 80 2014 38 45
    • (2014) Thin-Walled Struct. , vol.80 , pp. 38-45
    • Bai, Z.1    Guo, H.2    Jiang, B.3    Zhu, F.4    Cao, L.5
  • 12
    • 0035311741 scopus 로고    scopus 로고
    • Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption
    • W. Chen, and T. Wierzbicki Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption Thin-Walled Struct. 39 2001 287 306
    • (2001) Thin-Walled Struct. , vol.39 , pp. 287-306
    • Chen, W.1    Wierzbicki, T.2
  • 13
    • 84876834575 scopus 로고    scopus 로고
    • Energy absorption of multi-cell stub columns under axial compression
    • X. Zhang, and H. Zhang Energy absorption of multi-cell stub columns under axial compression Thin-Walled Struct. 68 2013 156 163
    • (2013) Thin-Walled Struct. , vol.68 , pp. 156-163
    • Zhang, X.1    Zhang, H.2
  • 14
    • 84875758878 scopus 로고    scopus 로고
    • An investigation on the energy absorption characteristics of square tubes
    • A. Alavi Nia, and M. Parsapour An investigation on the energy absorption characteristics of square tubes Thin-Walled Struct. 68 2013 26 34
    • (2013) Thin-Walled Struct. , vol.68 , pp. 26-34
    • Alavi Nia, A.1    Parsapour, M.2
  • 15
    • 78649486823 scopus 로고    scopus 로고
    • Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes
    • A. Najafi, and M. Rais-Rohani Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes Thin-Walled Struct. 49 2011 1 12
    • (2011) Thin-Walled Struct. , vol.49 , pp. 1-12
    • Najafi, A.1    Rais-Rohani, M.2
  • 16
    • 0036750129 scopus 로고    scopus 로고
    • Crashworthiness of aluminum extrusions subjected to oblique loading: Experiments and numerical analyses
    • A. Reyes, M. Langseth, and O. Hopperstad Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses Int. J. Mech. Sci. 44 2002 1965 1984
    • (2002) Int. J. Mech. Sci. , vol.44 , pp. 1965-1984
    • Reyes, A.1    Langseth, M.2    Hopperstad, O.3
  • 17
    • 84874829784 scopus 로고    scopus 로고
    • A comparative study on the windowed and multi-cell square tubes under axial and oblique loading
    • J. Song, and F. Guo A comparative study on the windowed and multi-cell square tubes under axial and oblique loading Thin-Walled Struct. 66 2013 9 14
    • (2013) Thin-Walled Struct. , vol.66 , pp. 9-14
    • Song, J.1    Guo, F.2
  • 18
    • 84907555121 scopus 로고    scopus 로고
    • Theoretical prediction and crashworthiness optimization of multi-cell square tubes under oblique impact loading
    • T. Tran, S. Hou, X. Han, N. Nguyen, and M. Chau Theoretical prediction and crashworthiness optimization of multi-cell square tubes under oblique impact loading Int. J. Mech. Sci. 89 2014 177 193
    • (2014) Int. J. Mech. Sci. , vol.89 , pp. 177-193
    • Tran, T.1    Hou, S.2    Han, X.3    Nguyen, N.4    Chau, M.5
  • 19
    • 84910080567 scopus 로고    scopus 로고
    • Crushing analysis and multiobjective optimization for functionally graded foam-filled tubes under multiple load cases
    • G. Li, Z. Zhang, G. Sun, F. Xu, and X. Huang Crushing analysis and multiobjective optimization for functionally graded foam-filled tubes under multiple load cases Int. J. Mech. Sci. 89 2014 439 452
    • (2014) Int. J. Mech. Sci. , vol.89 , pp. 439-452
    • Li, G.1    Zhang, Z.2    Sun, G.3    Xu, F.4    Huang, X.5
  • 20
    • 0742305085 scopus 로고    scopus 로고
    • Aluminum foam-filled extrusions subjected to oblique loading: Experimental and numerical study
    • A. Reyes, O. Hopperstad, and M. Langseth Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study Int. J. Solids Struct. 41 2004 1645 1675
    • (2004) Int. J. Solids Struct. , vol.41 , pp. 1645-1675
    • Reyes, A.1    Hopperstad, O.2    Langseth, M.3
  • 21
    • 0042563187 scopus 로고    scopus 로고
    • Square aluminum tubes subjected to oblique loading
    • A. Reyes, M. Langseth, and O.S. Hopperstad Square aluminum tubes subjected to oblique loading Int. J. Impact Eng. 28 2003 1077 1106
    • (2003) Int. J. Impact Eng. , vol.28 , pp. 1077-1106
    • Reyes, A.1    Langseth, M.2    Hopperstad, O.S.3
  • 22
    • 84886683751 scopus 로고    scopus 로고
    • Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections
    • A. Alavi Nia, and M. Parsapour Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections Thin-Walled Struct. 74 2014 155 165
    • (2014) Thin-Walled Struct. , vol.74 , pp. 155-165
    • Alavi Nia, A.1    Parsapour, M.2
  • 23
    • 0035124312 scopus 로고    scopus 로고
    • Development of the ultra-low-fuel-consumption hybrid car - INSIGHT
    • K. Fukuo, A. Fujimura, M. Saito, K. Tsunoda, and S. Takiguchi Development of the ultra-low-fuel-consumption hybrid car - INSIGHT JSAE Rev. 22 2001 95 103
    • (2001) JSAE Rev. , vol.22 , pp. 95-103
    • Fukuo, K.1    Fujimura, A.2    Saito, M.3    Tsunoda, K.4    Takiguchi, S.5
  • 24
    • 84936868852 scopus 로고    scopus 로고
    • Theoretical prediction and crashworthiness optimization of multi-cell hexagonal tubes
    • submitted for publication
    • N. Qiu, Y. Gao, J. Fang, Z. Feng, G. Sun, Q. Li, Theoretical prediction and crashworthiness optimization of multi-cell hexagonal tubes, Thin-walled Structures, submitted for publication.
    • Thin-walled Structures
    • Qiu, N.1    Gao, Y.2    Fang, J.3    Feng, Z.4    Sun, G.5    Li, Q.6
  • 25
    • 63049132450 scopus 로고    scopus 로고
    • Crashworthiness design for foam filled thin-wall structures
    • S. Hou, Q. Li, S. Long, X. Yang, and W. Li Crashworthiness design for foam filled thin-wall structures Mater. Des. 30 2009 2024 2032
    • (2009) Mater. Des. , vol.30 , pp. 2024-2032
    • Hou, S.1    Li, Q.2    Long, S.3    Yang, X.4    Li, W.5
  • 26
    • 84907501366 scopus 로고    scopus 로고
    • Crushing analysis and numerical optimization of angle element structures under axial impact loading
    • T. Tran, S. Hou, X. Han, and M. Chau Crushing analysis and numerical optimization of angle element structures under axial impact loading Compos. Struct. 119 2015 422 435
    • (2015) Compos. Struct. , vol.119 , pp. 422-435
    • Tran, T.1    Hou, S.2    Han, X.3    Chau, M.4
  • 27
    • 0033895149 scopus 로고    scopus 로고
    • Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler
    • A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler Int. J. Impact Eng. 24 2000 475 507
    • (2000) Int. J. Impact Eng. , vol.24 , pp. 475-507
    • Hanssen, A.G.1    Langseth, M.2    Hopperstad, O.S.3
  • 29
    • 75849160503 scopus 로고    scopus 로고
    • Crashworthiness design for functionally graded foam-filled thin-walled structures
    • G. Sun, G. Li, S. Hou, S. Zhou, W. Li, and Q. Li Crashworthiness design for functionally graded foam-filled thin-walled structures Mater. Sci. Eng.: A 527 2010 1911 1919
    • (2010) Mater. Sci. Eng.: A , vol.527 , pp. 1911-1919
    • Sun, G.1    Li, G.2    Hou, S.3    Zhou, S.4    Li, W.5    Li, Q.6
  • 30
    • 77957841574 scopus 로고    scopus 로고
    • The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading
    • M.A. Guler, M.E. Cerit, B. Bayram, B. Gerceker, and E. Karakaya The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading Int. J. Crashworth. 15 2010 377 390
    • (2010) Int. J. Crashworth. , vol.15 , pp. 377-390
    • Guler, M.A.1    Cerit, M.E.2    Bayram, B.3    Gerceker, B.4    Karakaya, E.5
  • 31
    • 77958513543 scopus 로고    scopus 로고
    • Materials selection using complex proportional assessment and evaluation of mixed data methods
    • P. Chatterjee, V.M. Athawale, and S. Chakraborty Materials selection using complex proportional assessment and evaluation of mixed data methods Mater. Des. 32 2011 851 860
    • (2011) Mater. Des. , vol.32 , pp. 851-860
    • Chatterjee, P.1    Athawale, V.M.2    Chakraborty, S.3
  • 32
    • 45749149058 scopus 로고    scopus 로고
    • Selection of the effective dwelling house walls by applying attributes values determined at intervals
    • E.K. Zavadskas, A. Kaklauskas, Z. Turskis, and J. Tamošaitiene Selection of the effective dwelling house walls by applying attributes values determined at intervals J. Civ. Eng. Manag. 14 2008 85 93
    • (2008) J. Civ. Eng. Manag. , vol.14 , pp. 85-93
    • Zavadskas, E.K.1    Kaklauskas, A.2    Turskis, Z.3    Tamošaitiene, J.4
  • 33
    • 33751429666 scopus 로고    scopus 로고
    • A multiple criteria decision support on-line system for construction
    • A. Kaklauskas, E.K. Zavadskas, and V. Trinkunas A multiple criteria decision support on-line system for construction Eng. Appl. Artif. Intell. 20 2007 163 175
    • (2007) Eng. Appl. Artif. Intell. , vol.20 , pp. 163-175
    • Kaklauskas, A.1    Zavadskas, E.K.2    Trinkunas, V.3
  • 35
    • 33644749098 scopus 로고    scopus 로고
    • Selection of low-e windows in retrofit of public buildings by applying multiple criteria method COPRAS: A Lithuanian case
    • A. Kaklauskas, E.K. Zavadskas, S. Raslanas, R. Ginevicius, A. Komka, and P. Malinauskas Selection of low-e windows in retrofit of public buildings by applying multiple criteria method COPRAS: a Lithuanian case Energy Build. 38 2006 454 462
    • (2006) Energy Build. , vol.38 , pp. 454-462
    • Kaklauskas, A.1    Zavadskas, E.K.2    Raslanas, S.3    Ginevicius, R.4    Komka, A.5    Malinauskas, P.6
  • 37
    • 84878861797 scopus 로고    scopus 로고
    • Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces
    • F. Tarlochan, F. Samer, A.M.S. Hamouda, S. Ramesh, and K. Khalid Design of thin wall structures for energy absorption applications: enhancement of crashworthiness due to axial and oblique impact forces Thin-Walled Struct. 71 2013 7 17
    • (2013) Thin-Walled Struct. , vol.71 , pp. 7-17
    • Tarlochan, F.1    Samer, F.2    Hamouda, A.M.S.3    Ramesh, S.4    Khalid, K.5
  • 38
    • 84911880495 scopus 로고    scopus 로고
    • Optimization of spot-welded joints combined artificial bee colony algorithm with sequential kriging optimization
    • J. Fang, Y. Gao, G. Sun, C. Xu, Y. Zhang, Q. Li, Optimization of spot-welded joints combined artificial bee colony algorithm with sequential kriging optimization, Adv. Mech. Eng. 2014.
    • (2014) Adv. Mech. Eng.
    • Fang, J.1    Gao, Y.2    Sun, G.3    Xu, C.4    Zhang, Y.5    Li, Q.6
  • 39
    • 84911406541 scopus 로고    scopus 로고
    • Fatigue optimization with combined ensembles of surrogate modeling for a truck cab
    • J. Fang, Y. Gao, G. Sun, C. Xu, and Q. Li Fatigue optimization with combined ensembles of surrogate modeling for a truck cab J. Mech. Sci. Technol. 28 2014 4641 4649
    • (2014) J. Mech. Sci. Technol. , vol.28 , pp. 4641-4649
    • Fang, J.1    Gao, Y.2    Sun, G.3    Xu, C.4    Li, Q.5
  • 40
    • 84905233990 scopus 로고    scopus 로고
    • Crushing analysis and multi-objective crashworthiness optimization of GFRP honeycomb-filled energy absorption devices
    • J. Paz, J. Díaz, L. Romera, and M. Costas Crushing analysis and multi-objective crashworthiness optimization of GFRP honeycomb-filled energy absorption devices Finite Elem. Anal. Des. 91 2014 30 39
    • (2014) Finite Elem. Anal. Des. , vol.91 , pp. 30-39
    • Paz, J.1    Díaz, J.2    Romera, L.3    Costas, M.4
  • 41
    • 33947210796 scopus 로고    scopus 로고
    • Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria
    • S. Hou, Q. Li, S. Long, X. Yang, and W. Li Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria Finite Elem. Anal. Des. 43 2007 555 565
    • (2007) Finite Elem. Anal. Des. , vol.43 , pp. 555-565
    • Hou, S.1    Li, Q.2    Long, S.3    Yang, X.4    Li, W.5
  • 42
    • 55849152270 scopus 로고    scopus 로고
    • Optimum design of straight thin-walled box section beams for crashworthiness analysis
    • Y. Liu Optimum design of straight thin-walled box section beams for crashworthiness analysis Finite Elem. Anal. Des. 44 2008 139 147
    • (2008) Finite Elem. Anal. Des. , vol.44 , pp. 139-147
    • Liu, Y.1
  • 43
    • 33646041272 scopus 로고    scopus 로고
    • Optimal crashworthiness design of a spot-welded thin-walled hat section
    • Y. Xiang, Q. Wang, Z. Fan, and H. Fang Optimal crashworthiness design of a spot-welded thin-walled hat section Finite Elem. Anal. Des. 42 2006 846 855
    • (2006) Finite Elem. Anal. Des. , vol.42 , pp. 846-855
    • Xiang, Y.1    Wang, Q.2    Fan, Z.3    Fang, H.4
  • 44
    • 23144459061 scopus 로고    scopus 로고
    • A comparative study of metamodeling methods for multiobjective crashworthiness optimization
    • H. Fang, M. Rais-Rohani, Z. Liu, and M. Horstemeyer A comparative study of metamodeling methods for multiobjective crashworthiness optimization Comput. Struct. 83 2005 2121 2136
    • (2005) Comput. Struct. , vol.83 , pp. 2121-2136
    • Fang, H.1    Rais-Rohani, M.2    Liu, Z.3    Horstemeyer, M.4
  • 45
    • 84863178805 scopus 로고    scopus 로고
    • Multi-disciplinary optimisation for front auto body based on multiple optimisation methods
    • Y.K. Gao, and F. Sun Multi-disciplinary optimisation for front auto body based on multiple optimisation methods Int. J. Veh. Des. 57 2011 178 195
    • (2011) Int. J. Veh. Des. , vol.57 , pp. 178-195
    • Gao, Y.K.1    Sun, F.2
  • 46
    • 84872055937 scopus 로고    scopus 로고
    • Multiobjective reliability-based optimization for design of a vehicledoor
    • J. Fang, Y. Gao, G. Sun, and Q. Li Multiobjective reliability-based optimization for design of a vehicledoor Finite Elem. Anal. Des. 67 2013 13 21
    • (2013) Finite Elem. Anal. Des. , vol.67 , pp. 13-21
    • Fang, J.1    Gao, Y.2    Sun, G.3    Li, Q.4
  • 47
    • 84907552090 scopus 로고    scopus 로고
    • Crashworthiness design of foam-filled bitubal structures with uncertainty
    • J. Fang, Y. Gao, G. Sun, Y. Zhang, and Q. Li Crashworthiness design of foam-filled bitubal structures with uncertainty Int. J. Non-Linear Mech. 67 2014 120 132
    • (2014) Int. J. Non-Linear Mech. , vol.67 , pp. 120-132
    • Fang, J.1    Gao, Y.2    Sun, G.3    Zhang, Y.4    Li, Q.5
  • 48
    • 38149146334 scopus 로고
    • Optimal Latin-hypercube designs for computer experiments
    • J.-S. Park Optimal Latin-hypercube designs for computer experiments J. Stat. Plan. Inference 39 1994 95 111
    • (1994) J. Stat. Plan. Inference , vol.39 , pp. 95-111
    • Park, J.-S.1
  • 49
    • 84862229032 scopus 로고    scopus 로고
    • Variable fidelity design based surrogate and artificial bee colony algorithm for sheet metal forming process
    • G. Sun, G. Li, and Q. Li Variable fidelity design based surrogate and artificial bee colony algorithm for sheet metal forming process Finite Elem. Anal. Des. 59 2012 76 90
    • (2012) Finite Elem. Anal. Des. , vol.59 , pp. 76-90
    • Sun, G.1    Li, G.2    Li, Q.3
  • 51
    • 84863116262 scopus 로고    scopus 로고
    • Radial basis functional model for multi-objective sheet metal forming optimization
    • G. Sun, G. Li, Z. Gong, G. He, and Q. Li Radial basis functional model for multi-objective sheet metal forming optimization Eng. Optim. 43 2011 1351 1366
    • (2011) Eng. Optim. , vol.43 , pp. 1351-1366
    • Sun, G.1    Li, G.2    Gong, Z.3    He, G.4    Li, Q.5
  • 52
    • 42649144828 scopus 로고    scopus 로고
    • Multiobjective optimization for crash safety design of vehicles using stepwise regression model
    • X. Liao, Q. Li, X. Yang, W. Zhang, and W. Li Multiobjective optimization for crash safety design of vehicles using stepwise regression model Struct. Multidiscip. Optim. 35 2008 561 569
    • (2008) Struct. Multidiscip. Optim. , vol.35 , pp. 561-569
    • Liao, X.1    Li, Q.2    Yang, X.3    Zhang, W.4    Li, W.5
  • 55
    • 67649671985 scopus 로고    scopus 로고
    • Adaptive approximation in multi-objective optimization for full stochastic fatigue design problem
    • B.-S. Jang, D.-E. Ko, Y.-S. Suh, and Y.-S. Yang Adaptive approximation in multi-objective optimization for full stochastic fatigue design problem Mar. Struct. 22 2009 610 632
    • (2009) Mar. Struct. , vol.22 , pp. 610-632
    • Jang, B.-S.1    Ko, D.-E.2    Suh, Y.-S.3    Yang, Y.-S.4
  • 56
    • 0036747856 scopus 로고    scopus 로고
    • Managing approximation models in multiobjective optimization
    • B.S. Yang, Y.S. Yeun, and W.S. Ruy Managing approximation models in multiobjective optimization Struct. Multidiscip. Optim. 24 2002 141 156
    • (2002) Struct. Multidiscip. Optim. , vol.24 , pp. 141-156
    • Yang, B.S.1    Yeun, Y.S.2    Ruy, W.S.3
  • 57
    • 84901691982 scopus 로고    scopus 로고
    • Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel
    • G. Sun, X. Song, S. Baek, and Q. Li Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel Struct. Multidiscip. Optim. 49 2014 897 913
    • (2014) Struct. Multidiscip. Optim. , vol.49 , pp. 897-913
    • Sun, G.1    Song, X.2    Baek, S.3    Li, Q.4
  • 58
    • 1542316248 scopus 로고    scopus 로고
    • Multi-objective reliability-based optimization of prestressed concrete beams
    • S. Barakat, K. Bani-Hani, and M.Q. Taha Multi-objective reliability-based optimization of prestressed concrete beams Struct. Saf. 26 2004 311 342
    • (2004) Struct. Saf. , vol.26 , pp. 311-342
    • Barakat, S.1    Bani-Hani, K.2    Taha, M.Q.3
  • 59
    • 84936884610 scopus 로고    scopus 로고
    • NHTSA-US NCAP, 2011
    • NHTSA-US NCAP, 2011 (http://www.safecarguide.com/exp/usncap/usncap.htm).


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.