Improved mechanical properties of polylactide nanocomposites-reinforced with cellulose nanofibrils through interfacial engineering via amine-functionalization

Carbohydrate Polymers

Volumn 131, Issue , 2015, Pages 208-217

  Lu, Yuan ^a   Cueva, Mario Calderón ^b   Lara Curzio, Edgar ^a   Ozcan, Soydan ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b UNIVERSIDAD SAN FRANCISCO DE QUITO   (Ecuador)

Author keywords

Aminolysis; Cellulose nanofibrils; PAMAM; Polylactide; Silylation

Indexed keywords

ADDITION REACTIONS; CELLULOSE; GRAFTING (CHEMICAL); NANOCOMPOSITES; NANOFIBERS; POLYESTERS; REINFORCEMENT; TENSILE STRENGTH;

AMINOLYSIS; CELLULOSE NANOFIBRILS; PAMAM; POLY LACTIDE; SILYLATIONS;

VIBRATIONS (MECHANICAL);

AMINE; CELLULOSE; NANOCOMPOSITE; POLYESTER; POLYLACTIDE;

CHEMISTRY; DIFFERENTIAL SCANNING CALORIMETRY; INFRARED SPECTROSCOPY; MECHANICAL STRESS; MECHANICS; MOLECULAR WEIGHT; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; TENSILE STRENGTH; ULTRASTRUCTURE; X RAY PHOTOELECTRON SPECTROSCOPY;

AMINES; CALORIMETRY, DIFFERENTIAL SCANNING; CELLULOSE; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; MOLECULAR WEIGHT; NANOCOMPOSITES; PHOTOELECTRON SPECTROSCOPY; POLYESTERS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; STRESS, MECHANICAL; TEMPERATURE; TENSILE STRENGTH;

EID: 84934981697     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2015.05.047     Document Type: Article

References (52)

1. B.J. Ash, R.W. Siegel, and L.S. Schadler Glass-transition temperature behavior of alumina/PMMA nanocomposites Journal of Polymer Science, B: Polymer Physics 42 23 2004 4371 4383
2. R. Auras, B. Harte, and S. Selke An overview of polylactides as packaging materials Macromolecular Bioscience 4 9 2004 835 864
3. A. Bansal, H.C. Yang, C.Z. Li, R.C. Benicewicz, S.K. Kumar, and L.S. Schadler Controlling the thermornechanical properties of polymer nanocomposites by tailoring the polymer-particle interface Journal of Polymer Science, B: Polymer Physics 44 20 2006 2944 2950
4. S. Berlioz, S. Molina-Boisseau, Y. Nishiyama, and L. Heux Gas-phase surface esterification of cellulose microfibrils and whiskers Biomacromolecules 10 8 2009 2144 2151
5. J.J. Blaker, K.Y. Lee, X.X. Li, A. Menner, and A. Bismarck Renewable nanocomposite polymer foams synthesized from Pickering emulsion templates Green Chemistry 11 9 2009 1321 1326
6. M. Brzezinski, and T. Biela Polylactide nanocomposites with functionalized carbon nanotubes and their stereocomplexes: A focused review Materials Letters 121 2014 244 250
7. M. Bulota, and M. Hughes Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose Journal of Materials Science 47 14 2012 5517 5523
8. X.D. Cao, Y. Habibi, and L.A. Lucia One-pot polymerization, surface grafting, and processing of waterborne polyurethane-cellulose nanocrystal nanocomposites Journal of Materials Chemistry 19 38 2009 7137 7145
9. J.N. Coleman, U. Khan, and Y.K. Gun'ko Mechanical reinforcement of polymers using carbon nanotubes Advanced Materials 18 6 2006 689 706
10. W. Czaja, A. Krystynowicz, S. Bielecki, and R.M. Brown Microbial cellulose - The natural power to heal wounds Biomaterials 27 2 2006 145 151
11. A.J. de Menezes, G. Siqueira, A.A.S. Curvelo, and A. Dufresne Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites Polymer 50 19 2009 4552 4563
12. S. Fujisawa, T. Saito, S. Kimura, T. Iwata, and A. Isogai Surface engineering of ultrafine cellulose nanofibrils toward polymer nanocomposite materials Biomacromolecules 14 5 2013 1541 1546
13. J. Ganster, H.-P. Fink, A. Lau, F. Hussain, and K. Lafdi PLA-based bio-and nanocomposites 2010 Taylor & Francis Group Boca Raton, FL
14. D. Garlotta A literature review of poly(lactic acid) Journal of Polymers and the Environment 9 2 2001 63 84
15. P. Gatenholm, and D. Klemm Bacterial nanocellulose as a renewable material for biomedical applications MRS Bulletin 35 3 2010 208 213
16. A.L. Goffin, J.M. Raquez, E. Duquesne, G. Siqueira, Y. Habibi, and A. Dufresne From interfacial ring-opening polymerization to melt processing of cellulose nanowhisker-filled polylactide-based nanocomposites Biomacromolecules 12 7 2011 2456 2465
17. A.L. Goffin, J.M. Raquez, E. Duquesne, G. Siqueira, Y. Habibi, and A. Dufresne Poly(epsilon-caprolactone) based nanocomposites reinforced by surface-grafted cellulose nanowhiskers via extrusion processing: Morphology, rheology, and thermo-mechanical properties Polymer 52 7 2011 1532 1538
18. Y. Habibi, L.A. Lucia, and O.J. Rojas Cellulose nanocrystals: Chemistry, self-assembly, and applications Chemical Reviews 110 6 2010 3479 3500
19. A. Iwatake, M. Nogi, and H. Yano Cellulose nanofiber-reinforced polylactic acid Composites Science and Technology 68 9 2008 2103 2106
20. M. Jonoobi, J. Harun, A.P. Mathew, and K. Oksman Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion Composites Science and Technology 70 12 2010 1742 1747
21. P.S.S. Lacerda, A.M.M.V. Barros-Timmons, C.S.R. Freire, A.J.D. Silvestre, and C.P. Neto Nanostructured composites obtained by ATRP sleeving of bacterial cellulose nanofibers with acrylate polymers Biomacromolecules 14 6 2013 2063 2073
22. H.S. Lee, P.D. Fasulo, W.R. Rodgers, and D.R. Paul TPO based nanocomposites. Part 1. Morphology and mechanical properties Polymer 46 25 2005 11673 11689
23. N. Lin, and A. Dufresne Physical and/or chemical compatibilization of extruded cellulose nanocrystal reinforced polystyrene nanocomposites Macromolecules 46 14 2013 5570 5583
24. N. Ljungberg, C. Bonini, F. Bortolussi, C. Boisson, L. Heux, and J.Y. Cavaille New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: Effect of surface and dispersion characteristics Biomacromolecules 6 5 2005 2732 2739
25. H. Lonnberg, L. Fogelstrom, Q. Zhou, A. Hult, L. Berglund, and E. Malmstrom Investigation of the graft length impact on the interfacial toughness in a cellulose/poly(epsilon-caprolactone) bilayer laminate Composites Science and Technology 71 1 2011 9 12
26. Y. Lu, D.L. Slomberg, A. Shah, and M.H. Schoenfisch Nitric oxide-releasing amphiphilic poly(amidoamine) (PAMAM) dendrimers as antibacterial agents Biomacromolecules 14 10 2013 3589 3598
27. Y. Lu, H.L. Tekinalp, C.C. Eberle, W. Peter, A.K. Naskar, and S. Ozcan Nanocellulose in polymer composites and biomedical applications Tappi Journal 13 6 2014 47 54
28. J. Lunt Large-scale production, properties and commercial applications of polylactic acid polymers Polymer Degradation and Stability 59 1-3 1998 145 152
29. A.P. Mathew, K. Oksman, and M. Sain The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid Journal of Applied Polymer Science 101 1 2006 300 310
30. T.C. Merkel, B.D. Freeman, R.J. Spontak, Z. He, I. Pinnau, and P. Meakin Ultrapermeable, reverse-selective nanocomposite membranes Science 296 5567 2002 519 522
31. A.N. Nakagaito, A. Fujimura, T. Sakai, Y. Hama, and H. Yano Production of microfibrillated cellulose (MFC)-reinforced polylactic acid (PLA) nanocomposites from sheets obtained by a papermaking-like process Composites Science and Technology 69 7 2009 1293 1297
32. K. Okubo, T. Fujii, and E.T. Thostenson Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose Composites, A - Applied Science and Manufacturing 40 4 2009 469 475
33. M. Paakko, M. Ankerfors, H. Kosonen, A. Nykanen, S. Ahola, and M. Osterberg Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels Biomacromolecules 8 6 2007 1934 1941
34. L. Petersson, I. Kvien, and K. Oksman Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials Composites Science and Technology 67 11-12 2007 2535 2544
35. F. Quero, M. Nogi, H. Yano, K. Abdulsalami, S.M. Holmes, and B.H. Sakakini Optimization of the mechanical performance of bacterial cellulose/poly(l-lactic) acid composites ACS Applied Materials & Interfaces 2 1 2010 321 330
36. M.A. Rafiee, J. Rafiee, Z. Wang, H.H. Song, Z.Z. Yu, and N. Koratkar Enhanced mechanical properties of nanocomposites at low graphene content ACS Nano 3 12 2009 3884 3890
37. T. Ramanathan, A.A. Abdala, S. Stankovich, D.A. Dikin, M. Herrera-Alonso, and R.D. Piner Functionalized graphene sheets for polymer nanocomposites Nature Nanotechnology 3 6 2008 327 331
38. J.M. Raquez, Y. Habibi, M. Murariu, and P. Dubois Polylactide (PLA)-based nanocomposites Progress in Polymer Science 38 10-11 2013 1504 1542
39. T. Saito, R. Kuramae, J. Wohlert, L.A. Berglund, and A. Isogai An ultrastrong nanofibrillar biomaterial: The strength of single cellulose nanofibrils revealed via sonication-induced fragmentation Biomacromolecules 14 1 2013 248 253
40. M.D. Sanchez-Garcia, E. Gimenez, and J.M. Lagaron Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers Carbohydrate Polymers 71 2 2008 235 244
41. J.F. Sassi, and H. Chanzy Ultrastructural aspects of the acetylation of cellulose Cellulose 2 2 1995 111 127
42. G. Sebe, F. Ham-Pichavant, and G. Pecastaings Dispersibility and emulsion-stabilizing effect of cellulose nanowhiskers esterified by vinyl acetate and vinyl cinnamate Biomacromolecules 14 8 2013 2937 2944
43. R.A. Shanks, A. Hodzic, and D. Ridderhof Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization Journal of Applied Polymer Science 101 6 2006 3620 3629
44. L. Suryanegara, A.N. Nakagaito, and H. Yano The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites Composites Science and Technology 69 7-8 2009 1187 1192
45. M. Thunwall, A. Boldizar, M. Rigdahl, K. Banke, T. Lindstrom, and H. Tufvesson Processing and properties of mineral-interfaced cellulose fibre composites Journal of Applied Polymer Science 107 2 2008 918 929
46. D.A. Tomalia, H. Baker, J. Dewald, M. Hall, G. Kallos, and S. Martin A new class of polymers - Starburst-dendritic macromolecules Polymer Journal 17 1 1985 117 132
47. L. Wagberg, G. Decher, M. Norgren, T. Lindstrom, M. Ankerfors, and K. Axnas The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes Langmuir 24 3 2008 784 795
48. K. Xhanari, K. Syverud, G. Chinga-Carrasco, K. Paso, and P. Stenius Structure of nanofibrillated cellulose layers at the o/w interface Journal of Colloid and Interface Science 356 1 2011 58 62
49. K. Xhanari, K. Syverud, and P. Stenius Emulsions stabilized by microfibrillated cellulose: The effect of hydrophobization, concentration and O/W ratio Journal of Dispersion Science and Technology 32 3 2011 447 452
50. X.Z. Xu, F. Liu, L. Jiang, J.Y. Zhu, D. Haagenson, and D.P. Wiesenborn Cellulose nanocrystals vs. cellulose nanofibrils: A comparative study on their microstructures and effects as polymer reinforcing agents ACS Applied Materials & Interfaces 5 8 2013 2999 3009
51. H.H. Yuan, Y. Nishiyama, M. Wada, and S. Kuga Surface acylation of cellulose whiskers by drying aqueous emulsion Biomacromolecules 7 3 2006 696 700
52. Y.B. Zhu, C.Y. Gao, X.Y. Liu, T. He, and J.C. Shen Immobilization of biomacromolecules onto aminolyzed poly(l-lactic acid) toward acceleration of endothelium regeneration Tissue Engineering 10 1-2 2004 53 61